日本ポリマー List of Products and Services

The training bat "LIBEIGHTER" developed by Nippon Polymer is a special synthetic rubber bat that allows players to acquire the necessary skills and sense of improvement that have been difficult to achieve with traditional practice. It is effective for training in baseball, softball, cricket, and more. It is also favored by professional baseball players and high school teams participating in Koshien! ■ What are the features of LIBEIGHTER? Using a flexible yet strong urethane material, it allows players to naturally develop a subtle sense of "flex" with every swing. Developed with the cooperation of sluggers and pitchers who have played baseball from elementary school to adult leagues, it closely approximates the feel of a game-ready bat. 【Details】 ■ The exquisite "flex" enables natural practice focused on flex and inside-out technique. ■ With a core material included, it allows for practice that emphasizes the point of contact. ■ The hard urethane provides a good balance of safety and usability in practical situations. ■ The appearance (form) and weight are comparable to game-ready bats. ■ Hand-tossed practice is also possible. *For more details, please feel free to contact us.

• others

The "Maglen," a special magnet developed by Nippon Polymer, allows vinyl curtains to stick together perfectly. It can be utilized for pest control and energy-saving measures in poultry farms, the entrances of greenhouses, and agricultural factories. When passing through the Maglen, the special magnet quickly adheres, preventing insects and outside air from entering, which also leads to increased work efficiency. Additionally, materials can be selected based on usage and environment, including light-blocking types, heat-insulating types, and mesh types that improve airflow. 【Points of Appreciation】 - The effort previously required to open and close doors or raise lifting cords is no longer needed, reducing physical strain and making it easier. - There has been a decrease in insect intrusion, making temperature management easier. - With options for heat-insulating, light-blocking, and mesh types, concerns about indoor heat leading to increased insects or poor breeding conditions have been reduced. - A uniquely developed non-toxic antibacterial spray is also available as an option, allowing for safe care of livestock. *For more details, please download the PDF or feel free to contact us.

• curtain

"MAGLEN" is a product that, simply by passing through a vinyl curtain embedded with special magnets, allows the curtains to stick together through "magnetic motion," serving as doors or partitions while minimizing gaps during opening and closing operations. It is adopted in food factories for purposes such as foreign matter intrusion prevention, pest control, gap management, and temperature control, and since it does not use electricity, it is also gaining attention as an energy-saving solution. *It is widely implemented in factories that are compliant with HACCP standards. After people or products on the line pass through, the special magnets immediately stick together, preventing insects from entering through gaps and allowing for seamless passage without letting outside air in. 【Key Benefits】 ■ Easy passage even when both hands are occupied ■ Usable in temperatures as low as -20°C ■ Reduces entry points for insects by minimizing gaps ■ Compatible with refrigerators/freezers due to customizable thickness, material, and color, contributing to energy savings in air conditioning ■ The transparent type can be used as a partition in corridors, allowing for safe passage ■ Also serves as an alternative to shutters/sheet shutters *For more details, please download the PDF or feel free to contact us. If you need a quote or any other assistance, please get in touch.

• curtain

The "Maglen," a special magnet developed by Nippon Polymer, allows vinyl curtains to stick together perfectly. It is useful for those considering [pest control], [energy-saving measures for air conditioning], and [partitions] in facilities that still face ongoing challenges. When passing through the Maglen, the special magnet quickly adheres, preventing pests, vermin, and outside air from coming through while allowing easy passage. It also increases work efficiency as it can be easily passed through even when hands are full. 【Benefits】 - The effort previously needed to open doors or shutters is no longer required, reducing strain on the body. - There are fewer gaps, which decreases the intrusion of pests and vermin, making temperature management easier. - There are options for pest control, light-blocking, and mesh types, preventing indoor heat that can increase pests. - A uniquely developed non-toxic antibacterial spray is also available as an option, allowing for safe care of livestock. Please feel free to consult with us! *For more details, please download the PDF or feel free to contact us.

• Other safety and hygiene products

The "Maglen," a special magnet developed by Nippon Polymer, allows vinyl curtains to stick together perfectly, making it useful for those considering pest control, energy-saving measures for air conditioning, and partitions in facilities that still face ongoing challenges. When passing through the Maglen, the special magnet quickly adheres, preventing pests, vermin, and outside air from coming through while allowing easy passage. It also improves work efficiency since it can be easily passed through even when hands are full. 【Points of Appreciation】 - Reduced waiting time and physical strain when raising doors or shutters for opening and closing. - Fewer gaps lead to a decrease in pests and easier temperature management. - A wide variety of sheet options available, with no worries about static electricity from friction. - Antibacterial measures can be implemented with a uniquely developed harmless antibacterial spray. - Curtain materials can be ordered to match applications, including heat-insulating, light-blocking, and mesh types. - Lower cost for design and installation compared to automatic doors and curtains.

• Grinding Machine

The "Maglen," a special magnet developed in-house by Nippon Polymer, allows vinyl curtains to stick together perfectly, making it useful for those considering partitions for smoking areas or air conditioning measures. Amidst the strengthened regulations for passive smoking prevention measures revised in 2020 as part of health promotion, our Maglen is being handled by national agencies as a countermeasure product. 【Points of Appreciation】 ■ No hassle of opening and closing doors; you can simply pass through, minimizing gaps to the bare minimum. ■ Custom-made production is available. ■ A wide variety of sheet options are available, including flame-retardant certified products. ■ Antibacterial measures can be implemented with our uniquely developed antibacterial deodorizing spray. ■ Curtain materials can be selected according to purpose, including heat-shielding, light-blocking, and mesh types. ■ Design and installation are low-cost.

• curtain
• Other safety and hygiene products
• Office furniture

■Are you facing any of these issues? - Unable to find a metal processing company that can handle your drawings - Struggling with the arrangement of multi-process products and multiple machining, wanting to reduce effort - Burden of quality inspection, wanting to standardize inspection accuracy, etc. ■Benefits of using Nippon Polymer - We can handle all metal processing technologies such as grinding, cutting, polishing, and casting, allowing for a single source for arrangements - Simplifying procurement operations by handling everything from material arrangement to surface treatment and assembly all at once - We provide high-quality products by inspecting and managing quality with both our company and the processing partner - With overseas group bases and various other partners, we can assist with cost consultations and orders during Japan's public holidays. ■Nippon Polymer's track record With over 50 years of achievements and trust, we offer a wealth of technology and knowledge, so please feel free to let us know your needs. We look forward to your inquiries and requests for quotes.

• stainless

■Are you facing any concerns? - Unable to find a metal processing company that can handle the drawings - It's difficult to arrange for multi-process products and multiple machining, and I want to reduce the hassle - I want to lessen the burden of quality inspections and standardize inspection accuracy, etc. ■Benefits of using Nippon Polymer - We can handle all metal processing technologies such as grinding, cutting, polishing, and casting, allowing for a single source for arrangements - Simplifying procurement operations by handling everything from material arrangements to surface treatment and assembly in one go - We provide high-quality products by conducting quality inspections and management in collaboration with our processing partners - With overseas group bases and various other partners, we can assist with cost consultations and orders during Japan's public holidays. ■Nippon Polymer's track record With over 50 years of experience and trust, we offer a wealth of technology and knowledge. Please feel free to let us know your needs. We look forward to your inquiries and requests for quotes.

• Other Auto Parts

Do you have any of the following concerns regarding metal and resin parts processing? - I can't find a processing company that can handle the drawings... - It's difficult to arrange for multi-process products and multiple processing, and I want to reduce the hassle... - I want to alleviate the burden of quality inspection and ensure uniformity in inspection accuracy... etc. ■ Benefits of using Nippon Polymer - We can consolidate your processing needs as we can handle all processing technologies, including grinding, cutting, polishing, and casting. - We simplify procurement operations by handling everything from material procurement to surface treatment and assembly in one go. - We provide high-quality products by inspecting and managing quality at both our company and the processing partner. - With overseas group bases and various other partners, we can assist with cost-related inquiries and orders during Japan's public holidays. ■ Achievements of Nippon Polymer With over 50 years of experience and trust, we offer a wealth of technology and knowledge, so please feel free to reach out with any requests. We look forward to your inquiries and requests for quotes. *For more details, please download the materials or contact us through our website.

• Metal bearings

"Top Nicogit Processing" is a plating method that disperses PTFE in an electroless Ni-P coating, resulting in a film that excels in slip properties and water repellency. It is effective for components that require wear resistance and slip properties, such as sliding parts, resin molding molds, and piston plungers. The coating has excellent adhesion to the substrate and can be applied to various materials such as metals, ceramics, and resins. 【Features】 ■ Excellent wear resistance and slip properties ■ Provides conductivity and static electricity prevention functions to the coating ■ Achieves high hardness through metal composite ■ Applicable to various materials such as metals, ceramics, and resins ■ Excellent adhesion to the substrate *For more details, please refer to the PDF document or feel free to contact us.

• Plating Equipment

We would like to introduce our "Heat-Resistant Cushion Material: Fluoro Rubber/Aramid Cloth." This product is a laminated board made of fluoro rubber and aramid cloth, which reduces temperature and pressure variations during the hot press process. Additionally, it can be used in a temperature range of up to 200 degrees. Please feel free to consult us when you need it. 【Size】 ■500mm x 500mm ■Available in thicknesses ranging from 1mm to 5mm *For more details, please refer to the PDF document or feel free to contact us.

• Other machine elements

We would like to introduce our "Heat-Resistant Cushion Material Silicone Rubber." This heat-resistant silicone rubber sheet is suitable for the manufacturing process of solar cell modules, including diaphragms, and can be used in various thermal press processes. Additionally, it can be used in temperature ranges up to 200 degrees Celsius. Please feel free to consult us when you need assistance. 【Sizes】 ■ Thickness: 2 to 10 mm ■ Width: 2000 to 3000 mm ■ Length: 3500 to 5500 mm *For more details, please refer to the PDF document or feel free to contact us.

• Other machine elements

We would like to introduce our "Heat-Resistant Cushion Material Silicone Rubber/Glass Cloth." It can be used as a heat-resistant cushion material in various heat press processes, including diaphragms for solar cell module manufacturing. Additionally, please feel free to consult us regarding various specifications such as height, durability, thickness, and width. We are constantly working on improving our materials. 【Specifications (partial)】 ■Model Number: GS56R ■Color: Reddish-brown ■Thickness (mm): 1.6 ■Width (mm): 1200 ■Length (m): 50 *For more details, please refer to the PDF document or feel free to contact us.

• Other machine elements

We would like to introduce our "Heat-Resistant Cushioning Materials (Silicone Rubber/Glass Cloth, Fluoro Rubber/Aramid Cloth)." These materials are used as heat-resistant cushioning in various heat press processes in fields such as semiconductors, solar cells, printed circuit boards, and construction materials. <Silicone Rubber/Glass Cloth> ■ Operating Temperature: Up to 200°C ■ Applications: Packaging processes, plywood manufacturing processes for construction materials, substrate manufacturing processes <Fluoro Rubber/Aramid Cloth> ■ Operating Temperature: Up to 200°C ■ Applications: Substrate manufacturing processes, plywood manufacturing processes for wood ■ Size: 500mm x 500mm (available in thicknesses ranging from 1mm to 5mm) Our company is constantly working on improving materials. For special specifications regarding hardness, heat resistance, thickness, width, etc., please feel free to consult with us.

• Rubber

Our "heat-resistant cushioning material" reduces "heat unevenness" and "pressure unevenness" that occur during the substrate pressing process, solving your issues with defects. It can be used in environments of around 200 degrees, and we offer various materials for cushioning depending on the application and environment. (We also have cushioning materials with heat resistance above 200 degrees, so please consult us.) Examples: Silicone rubber, glass cloth, fluorine rubber, aramid cloth. Additionally, we can provide cushioning materials that combine different functions on each side. We accommodate special specifications such as hardness, heat resistance, thickness, and width, so please feel free to contact us if you have any concerns during the substrate pressing process. *For more details, please download our materials or contact us.

• Rubber

The equipment for the new factory requires "long-term stable operation." 'MAGLEN' features durable materials and a special magnetic structure that effectively seals gaps even with repeated use. It is a long-term solution that combines energy efficiency and reliability. 【Perfect for these concerns】 - Want to stabilize air conditioning management in the long term - Want to introduce durable equipment - Want to reduce maintenance costs *For more details, please download the PDF or feel free to contact us. *Please contact us if you need a quote or anything else.

• curtain

When establishing a new factory, the construction period and maintenance aspects related to equipment installation are important. The magnetic vinyl curtain "MAGLEN" can be installed in a short period, has high workability, and is easy to maintain after operation. It helps improve the efficiency of factory equipment, from air conditioning management to securing work pathways. 【Perfect for these concerns】 - Want to shorten the startup construction period - Want to reduce management costs after operation - Want to respond flexibly to layout changes and expansions *For more details, please download the PDF or feel free to contact us. *Please contact us if you need a quote or anything else.

• curtain

"MAGLEN" is a vinyl curtain that incorporates special magnets, with a proven track record in food factories. The curtains stick together perfectly through "magnetic action," serving as doors and partitions, allowing for gap solutions and zoning in areas struggling with air conditioning and temperature control within food factories. In recent years, as hybrid work has become mainstream and flexible zoning is required, it can also be useful for layout changes and improving production efficiency. Additionally, even when both hands are occupied, it allows for passage by automatically opening and closing the shutter, preventing insects from entering through gaps and allowing movement without letting in outside air. (It is also effective for heat insulation during summer.) As part of HACCP measures and being a product that does not use electricity, it has been adopted in many food factories as an energy-saving solution. If you are struggling with air conditioning leaks (gap solutions) or effective zoning measures within food factories, please feel free to consult us. *For more details, please download the PDF or feel free to contact us. *If you need a quote or anything else, please get in touch.

• curtain

We would like to introduce our "Fluororesin/Glass Cloth" that we handle. This product is made by impregnating and sintering glass cloth with fluororesin (PTFE). It exhibits excellent insulation and dielectric properties over a wide frequency range and temperature range. Additionally, it is a chemically stable material that is not affected by most chemicals and solvents. Please feel free to contact us when you need assistance. 【Features】 ■ Excellent insulation and dielectric properties over a wide frequency range and temperature range ■ Chemically stable material ■ Not affected by most chemicals and solvents *For more details, please refer to the PDF document or feel free to contact us.

• Glass

We would like to introduce our "Fluororesin/Laminate" products. This product is made by laminating a PTFE sheet onto one side of a glass fiber composite material. It is pinhole-free and can be used in a temperature range of -100 to +260 degrees Celsius. Please feel free to contact us if you have any inquiries. [Features] ■ Pinhole-free *For more details, please refer to the PDF document or feel free to contact us.

• Glass

We would like to introduce our product, "Fluororesin/Aramid Cloth." This product is made by impregnating and sintering aramid cloth with fluororesin (PTFE). It is a chemically stable material that is resistant to most chemical agents and solvents. Additionally, it exhibits excellent insulation and dielectric properties over a wide frequency range and temperature range. Please feel free to contact us if you have any inquiries. 【Features】 ■ Excellent insulation and dielectric properties over a wide frequency range and temperature range ■ Chemically stable material ■ Resistant to most chemical agents and solvents ■ Good bending resistance *For more details, please refer to the PDF document or feel free to contact us.

• Other polymer materials

We would like to introduce the "Adhesive Tape/XT" that we handle. This product has a silicone-based pressure-sensitive adhesive applied to one side of a PTFE sky blue film. Due to its thin material, it has good thermal conductivity and strength. Additionally, it can be used in a temperature range of -100 to +240 degrees. Please feel free to contact us when you need it. 【Features】 ■ The thin material provides good thermal conductivity and strength. *For more details, please refer to the PDF document or feel free to contact us.

• Adhesive tape

We would like to introduce our product, "Adhesive Tape/GTT." This product features a silicone-based pressure-sensitive adhesive applied to one side of fluororesin-impregnated glass cloth. It can be used in a temperature range of -100 to +240 degrees. Due to the thin material, it has good thermal conductivity and excellent strength. Please feel free to contact us if you have any inquiries. 【Features】 ■ The thin material provides good thermal conductivity and excellent strength. * For more details, please refer to the PDF document or feel free to contact us.

• Adhesive tape

The "Zone Tape/TET" is a stripe-type product where an acrylic-based pressure-sensitive adhesive is applied only to both ends of one side of a glass cloth impregnated with fluororesin. The central part, which is not coated with adhesive, comes into contact with the heater and is secured at both ends of the tape. This prevents the heater from being directly fixed by the adhesive, allowing for better flexibility of the heater and resulting in a clean seal. Please feel free to contact us if you need any assistance. 【Features】 ■ The heater is not directly fixed by the adhesive, which improves the flexibility of the heater and allows for a clean seal. ■ Eliminates tape wrinkles and heater bends. *For more details, please refer to the PDF document or feel free to contact us.

• Adhesive tape

We would like to introduce our "release sheets." They excel in heat resistance and non-stick properties, and by using them for release purposes in rubber and plastic molding processes as well as food manufacturing processes, they can reduce raw material loss during product manufacturing and improve product quality and work efficiency. Please feel free to contact us if you have any inquiries. 【Features】 ■ Excellent heat resistance and non-stick properties ■ Can reduce raw material loss during product manufacturing and improve product quality and work efficiency *For more details, please refer to the PDF document or feel free to contact us.

• others

We would like to introduce the "thermal insulation sealing materials" that we handle. Using heat-resistant materials such as fluororubber, silicone rubber foam, glass mat, and silicone glass cloth, we provide insulation materials for piping and thermal insulation sealing materials for heating furnaces. The available materials include silicone tubes and fluororesin-impregnated cloth. Please feel free to contact us when you need assistance. 【Available Materials】 ■ Silicone tubes ■ Heat-resistant rubber foams such as silicone rubber ■ Glass cloth, mats ■ Silicone glass cloth ■ Fluororesin-impregnated cloth *For more details, please refer to the PDF document or feel free to contact us.

• others

We would like to introduce our "Pressure Cushion Sheet." This is a silicone rubber sheet with excellent thermal conductivity, which can be used as cushioning material in the LCD module manufacturing process and heat press process. It has higher strength compared to standalone silicone rubber and excels in release properties and dimensional stability. Additionally, it can be reused, reducing maintenance and manufacturing costs. Please feel free to contact us if you have any inquiries. 【Features】 ■ Uses rubber with high thermal conductivity, reducing the heating set temperature ■ Can be reused, allowing for reduced maintenance and manufacturing costs ■ Higher strength compared to standalone silicone rubber, with excellent release properties and dimensional stability *For more details, please refer to the PDF document or feel free to contact us.

• Rubber

The "PTFE Best Non-Metallic Expansion Joint Material" is a composite of PTFE (polytetrafluoroethylene) sheet and glass cloth. It is used to absorb the expansion caused by thermal expansion, vibration, and wind pressure in piping joints at steel mills, thermal power plants, and incineration facilities. It has excellent chemical resistance and can also be adapted to corrosive gases such as exhaust gases. Additionally, it excels in flexibility, chemical resistance, and vibration absorption capabilities. Please feel free to contact us for inquiries. 【Features】 ■ Excellent chemical resistance, adaptable to corrosive gases such as exhaust gases ■ Superior flexibility, chemical resistance, and vibration absorption capabilities *For more details, please refer to the PDF document or feel free to contact us.

• Other polymer materials

Our company responds to surface treatment requests, ranging from fluoropolymer coatings on various equipment to plating on metals. We offer "PTFE coating," which has excellent heat resistance, and "PFA coating," which provides a smooth film with fewer pinholes. We can add properties such as rubber, plastic, metal, release, insulation, corrosion resistance, and condensation prevention. 【Features】 <PTFE Coating> ■ Excellent heat resistance ■ Temperature range up to 260 degrees ■ Superior release (non-stick) properties *For more details, please refer to the PDF document or feel free to contact us.

• Surface treatment contract service

We would like to introduce our "Fluororesin Rotational Lining Processing." Lining is applied to the inner side of hollow substrates such as tanks and pipe fittings. Since no molds are required, lining can be done in a short time and at a low cost. Additionally, this method can accommodate various special shapes. Please feel free to contact us when you need our services. 【Features】 ■ Excellent chemical resistance ■ Outstanding sliding properties ■ High peeling performance ■ Impact resistance ■ Soundproofing measures *For more details, please refer to the PDF materials or feel free to contact us.

• Processing Contract

We respond to precise needs with multifunctional fluororesins, hard stainless steel, and soft sponges. We specialize in machining various resins such as fluorine, super engineering plastics, and high molecular polyethylene, as well as precision processing of soft materials like rubber, urethane, silicone, and elastomers. Additionally, we deliver products through molding processes tailored to your requirements, including high-precision injection, extrusion, vacuum, and blow molding. Please consult us for even the most challenging shapes. 【Products Offered】 ■ Resin machined products ■ Resin molded products ■ Precision processed rubber and elastomers *For more details, please refer to the PDF materials or feel free to contact us.

• Processing Contract

Our company specializes in precision processing of various metal materials and provides processing services tailored to your needs. We can undertake multiple tasks, including primary products, secondary and tertiary processing, and assembly, through close collaboration with various partners of all sizes. We are proactive in assisting with projects at the development stage, custom orders, labor-intensive products, and short delivery time projects, ensuring flexible and speedy responses. 【Features】 ■ Capable of handling multiple tasks, including primary products, secondary and tertiary processing, and assembly all at once. ■ Able to accommodate projects at the development stage, custom orders, labor-intensive products, and short delivery time projects. *For more details, please refer to the PDF document or feel free to contact us.

• Processing Contract

"MAGLEN" is a product that, simply by passing through a vinyl curtain embedded with special magnets, allows the curtains to stick together through "magnetic action," serving as doors or partitions and minimizing gaps during opening and closing operations. It is being adopted in food factories for purposes such as preventing foreign object contamination, pest control, gap management, and temperature control, and is gaining attention. *It is widely implemented in factories that have HACCP measures in place. After people or products on the line pass through, the special magnets quickly stick together, preventing the intrusion of insects through gaps and allowing for passage without letting outside air in. 【Features】 ■ Reduces gaps to suppress insect entry routes ■ Usable in environments as low as -20°C *Note that in places where condensation easily freezes, wear and tear can be significant. ■ Also serves as an alternative to shutters/sheet shutters. *For more details, please download the PDF or feel free to contact us. If you need a quote or anything else, please get in touch.

• curtain

"MAGLEN" is a product that reduces the intrusion of insects from the outside as the curtains stick together perfectly through "magnetic motion" just by passing through a vinyl curtain embedded with special magnets. It is also adopted in food factories for purposes such as preventing foreign matter contamination and pest control. *It is widely implemented in factories that have HACCP measures in place. After a person or product on the line passes through, the special magnets immediately stick together, preventing insects from entering through gaps and allowing for seamless movement without letting outside air in. 【Features】 ■ Usable in environments as low as -20°C *In places where condensation easily freezes, wear and tear may be significant. ■ Reduces gaps to suppress the pathways for insect intrusion. *For more details, please download the PDF or feel free to contact us. If you need a quote or anything else, please get in touch.

• curtain

"MAGLEN" is a vinyl curtain that incorporates special magnets, allowing the curtains to stick together through "magnetic movement," serving as doors or partitions. By minimizing gaps during opening and closing operations, it is well-suited for zoning measures in food factories. It is also adopted in food factories for purposes such as preventing foreign object contamination and pest control, and is widely implemented in factories that follow HACCP measures. After people or products on the line pass through, the special magnets quickly stick together, preventing insects from entering through gaps and allowing for movement without letting outside air in. [Features] - Reduces gaps to suppress insect entry routes - The transparent type can be used as a partition in corridors, allowing safe passage - Also serves as an alternative to shutters/sheet shutters *For more details, please download the PDF or feel free to contact us. If you need a quote or anything else, please get in touch.

• curtain

"MAGLEN" is a vinyl curtain with a proven track record in food factories. With "magnetic action," the curtains stick together perfectly, serving as doors or partitions, allowing for gap management and zoning in areas struggling with air conditioning and temperature control within food factories. It is effective for heat insulation in summer and thermal insulation in winter, enabling cost-effective air conditioning and temperature management. As it is a product that does not use electricity, it has been adopted in many food factories as an energy-saving measure. If you are having trouble with air conditioning leaks (gap management) in your food factory, please feel free to consult us. *For more details, please download the PDF or feel free to contact us. *If you need a quote or anything else, please get in touch.

• curtain

Are you facing any of these issues? - Heat escapes every time the door opens and closes, leaving the factory cold for a long time. - It's inconvenient to open and close doors or shutters when your hands are full. - Struggling with cold prevention in areas with complex layouts. Maglen uses special magnets that stick immediately after passing through, preventing outside air from coming in while allowing easy access. Additionally, it can be used as a barrier function when you want to enclose part of the interior. It contributes to energy-saving measures in busy airports and factories where temperature control is necessary by preventing air conditioning from escaping. [Points of Appreciation] - No force or effort is needed to open and close. - Temperature management has become easier than before. - Custom orders can meet your needs from a wide range of options. - The material of the curtains can be selected according to the application, including heat-insulating, light-blocking, and cold-resistant types. - Lower cost for design and installation compared to automatic doors or curtains. *For more details, please download the materials or contact us through our website.

• air conditioning

"MAGLEN" is a vinyl curtain that incorporates special magnets, with a proven track record in food factories. The curtains stick together perfectly through "magnetic action," serving as doors or partitions, allowing for gap management and zoning in areas struggling with air conditioning and temperature control within food factories. Additionally, during the transfer from refrigerated or frozen storage, condensation due to temperature rise can lead to bacterial growth on products, posing a risk to product quality. However, with the high insulation effect of MAGLEN, you can trust us to reduce that risk! Moreover, even when both hands are occupied, you can simply pass through to open and close the shutter, allowing for movement without letting in outside air. (This is also effective for heat insulation during summer.) If you are struggling with air conditioning leaks (gap management) or effective zoning measures in food factories, please feel free to consult us. *For more details, please download the PDF or feel free to contact us. *If you need a quote or anything else, please get in touch.

• curtain

"MAGLEN" is a vinyl curtain that incorporates special magnets, with a wealth of implementation experience in factories, warehouses, and booths. The curtains stick together tightly through "magnetic action," serving as doors or partitions, which allows for effective air conditioning management. It prevents air conditioning leaks and contributes to reducing electricity costs. Additionally, it can easily block off the external and internal spaces, reducing maintenance efforts. In the establishment of new factories, improving heating and cooling efficiency and energy conservation are significant challenges. "MAGLEN" effectively closes gaps with its magnetic mechanism, preventing outside air intrusion and cold air leaks. It enables both reduced electricity costs and a comfortable working environment in factories. It is perfect for the following concerns: - Wanting to reduce heating and cooling costs - Looking to decrease air conditioning load - Aiming to promote energy-saving measures in new factories *For more details, please download the PDF or feel free to contact us. *If you need a quote or any other assistance, please get in touch.

• curtain

"MAGLEN" is a vinyl curtain that incorporates special magnets, with a wealth of installation experience in factories, warehouses, and booths. The curtains stick together perfectly with "magnetic action," serving as doors or partitions, allowing for effective air conditioning management. It prevents air conditioning leaks and contributes to reducing electricity costs. Additionally, it can easily block off external and internal areas, reducing maintenance efforts. If you are struggling with air conditioning leaks (gap measures) in factories, warehouses, or booths, please feel free to consult us. *For more details, please download the PDF or feel free to contact us. *If you need a quote or anything else, please get in touch.

• curtain

We would like to introduce the fluororesin fabric sheet "TETLAS Fluororesin/Glass Cloth" handled by Nippon Polymer Co., Ltd. The usable temperature range is from -100 to 260°C, demonstrating excellent insulation and dielectric properties across a wide frequency range and temperature range. It is made of chemically stable materials and is resistant to most chemicals and solvents. It can be used as a release sheet in resin molding processes or as heat-resistant conveyor belt material. 【Features】 ■ Usable temperature range: -100 to 260°C ■ Wide frequency range ■ Excellent insulation and dielectric properties ■ Chemically stable material *For more details, please download the PDF or feel free to contact us.

• Other films and sheets

We would like to introduce the fluororesin fabric sheet "TETLAS Fluororesin/Mesh" handled by Nippon Polymer Co., Ltd. This product is made by impregnating and sintering fluororesin (PTFE) onto glass cloth, and it can be used in a temperature range of -100 to +260°C. It can be utilized as a release sheet in resin product molding processes, as well as for drying trays and conveyor belt materials. 【Features】 ■ Open mesh ■ Operating temperature range: -100 to +260°C *For more details, please download the PDF or feel free to contact us.

• Other films and sheets

We would like to introduce the fluororesin fabric sheet and heat-resistant cushioning material 'TETLAS Silicone Rubber/Glass Cloth' handled by Nippon Polymer Co., Ltd. It can be used as a heat-resistant cushioning material in various heat press processes, including diaphragms for solar cell module manufacturing. Please feel free to consult us regarding various specifications such as height, durability, thickness, and width. We are constantly working on improving our materials. 【Features】 ■ Operating temperature range: -100 to +200℃ ■ Usable as a heat-resistant cushioning material *For more details, please download the PDF or feel free to contact us.

• Other films and sheets

We would like to introduce the fluororesin fabric sheet "TETLAS Fluororesin/Laminate" handled by Nippon Polymer Co., Ltd. This product is made by laminating a PTFE sheet on one side of a glass fiber composite material and can be used in a temperature range of -100 to +260°C. It can be utilized as a piping joint material in power plants and waste treatment facilities. 【Features】 ■ Pinhole-free ■ Operating temperature range: -100 to +260°C *For more details, please download the PDF or feel free to contact us.

• Other films and sheets

We would like to introduce the fluororesin fabric sheet 'TETLAS Fluororesin/Silicone' handled by Nippon Polymer Co., Ltd. This product is made by impregnating and baking silicone into glass cloth, offering excellent grip and non-stick properties. Additionally, the operating temperature range is -100 to +200°C, making it suitable for packaging machine separator applications. 【Features】 ■ Surface grip ■ Excellent non-stick properties ■ Operating temperature range: -100 to 200°C *For more details, please download the PDF or feel free to contact us.

• Other films and sheets