メジャーメンツインターナショナルジャパン List of Products and Services

The "1340A" is a user-friendly reference voltage divider that can be used to verify the DC voltage measurement characteristics of calibrators and DVMs. There is no need for daily calibration before operation. It also features a built-in circuit protection chamber, and the internal temperature of the device can be monitored with a PT100. This product accurately divides the DC voltage output from calibrators and various sources to 1/10,000, 1/1,000, 1/100, and 1/10. 【Features】 ■ The divider circuit uses specially selected resistors to construct the circuit. ■ Operates in combination with 10V reference standards 1330A, 732B, and 732C. ■ Incorporates a specially designed high-precision resistor circuit in a temperature-stabilized internal chamber. ■ Stability of each voltage divider mechanism (10:1) is 0.3ppm. ■ No self-adjustment is required. *For more details, please refer to the PDF document or feel free to contact us.

• Voltage Meter

The "6020T" is designed for precise temperature measurement and is an easy-to-use measuring instrument that utilizes a DC comparator. Using the quick measurement mode, measurements can be taken within 20 seconds by simply pressing the start button, with a current polarity reversal rate of 2 seconds and measurement samples available down to 0.1 seconds. Additionally, it is equipped with the PRT calibration software Accu-T-Cal(TM) developed by NMI, allowing for a constant measurement current setting of 1mA. 【Features】 ■ New ADCC technology ■ Special current comparator ■ Self-calibrating DC resistance ratio bridge ■ Operable via touch panel or measurement software ■ Equipped with 6 channels of input terminals that can continuously supply measurement current *For more details, please refer to the PDF document or feel free to contact us.

• Other electronic measuring instruments

It has built-in standard resistors (1Ω, 10kΩ) and a standard voltage (10V), and can be used for artifact calibration of Fluke's calibrator 57X0A series. The built-in standard instruments can be calibrated at the Japan Electric Measuring Instruments Inspection Institute.

• Electrical Instruments/Electrometers
• Signal Generator

- Proven NMI design - Range: 100 kΩ to 10 PΩ - Ratio: 1:1, 10:1, 100:1, 1000:1 - Voltage: 1 V to 1000 V (5000 V option) - Resistance measurement and calibration can be performed automatically or manually using the included software - No temperature dependence - Can be connected to optional 10 or 20 channel coaxial matrix scanners, environmental & pressure monitors

• Insulation Tester
• Resistors
• Electrical Instruments/Electrometers

High resistance measurement automatic bridge equipped with a binary voltage divider (BVD) Performs self-calibration before measurement, enabling high resistance measurement and calibration without long-term drift High resistance bridge recognized by national metrology institutes in various countries Equipped with a 4-channel scanner Model - Can be expanded up to 40 channels using the 4200 series matrix scanner

• Electrical Instruments/Electrometers
• Insulation Tester
• Resistors

Precise measurement of internal power supply voltage and current to calculate and display resistance values. Measurement of resistance in the G (giga) Ω range is possible within approximately 20 seconds at a level of uncertainty in ppm. Please use it for measuring insulation resistance, volume resistance, and surface resistance. The premium model allows for the measurement of unknown resistance through ratio measurement using known references (standard resistors).

• Electrical Instruments/Electrometers
• Insulation Tester
• Resistors

Potentiometer equipped with a binary voltage divider (BVD). It can perform self-calibration before measurement, allowing for calibration without long-term drift. Please use it for calibrating Fluke calibrators' DC voltage, calibrating digital multimeters, and calibrating 10V Zener power supplies.

• Voltage Meter
• Electrical Instruments/Electrometers
• Testing Equipment and Devices

The elements are annealed to improve the temperature coefficient and eliminate self-heating errors. Low thermal electromotive force terminals are used for the voltage terminals. An optional forced cooling fan can be installed to keep the shunt power coefficient low. Please utilize this for current measurement required in the electric vehicle industry and the aircraft industry.

• Electrical Instruments/Electrometers

This is an air-type standard resistor developed to bridge the gap with high-precision and highly stable oil-type standard resistors in the air-type standard resistor market.

• Electrical Instruments/Electrometers

The "AccuBridge® 6010D" is a device developed for technicians to be used in resistance calibration at primary calibration institutions. It has an ideal specification for resistance calibration and temperature calibration, and has been recognized as an easy-to-use measuring device at national research calibration institutions and other primary calibration organizations. It can be utilized for ratio measurement and direct resistance measurement. The device is operated through the touch panel on the front, using the menu on the screen. The accuracy of the measurement results can be confirmed by performing interchange operations. The range for ratio confirmation is from 14:1 to 1:14. 【Features】 ■ Applications: Resistance calibration, temperature calibration ■ Measurement range: 0.001 Ω to 100 kΩ ■ Accuracy: <40 ppb ■ Self-calibration of measurement ratios ■ Can be used in combination with MI matrix scanners and range extenders ■ Services certified to ISO/IEC 17025 *For more details, please refer to the PDF document or feel free to contact us.

• Resistors
• Other measurement, recording and measuring instruments
• Other physicochemical equipment

Temperature range: -260℃ to 100℃ Long-term stability: within 3 mK (1 year) Short-term stability: within 1 mK Resistance value at 0℃: 25Ω

• Thermometer

Standard temperature measurement device for national metrology institutes worldwide DC resistance bridge Accuracy 15 ppb Measurement starts in 20 seconds High-speed sampling 0.1 seconds Measurement current 1 mA, continuously powered Built-in 6-channel scanner

• Other physicochemical equipment
• Temperature and humidity measuring instruments

This catalog primarily features calibration equipment from Measurements International Japan, a company that specializes in measuring instruments. We introduce various products, including the self-calibrating primary resistance bridge "AccuBridge," the precision resistance bridge "6010D," and the fast measurement speed "6010 Series." [Contents] ■ Precision Resistance Bridges ■ Temperature Bridges ■ Scanners ■ High Resistance Scanners ■ Range Extenders and Power Supplies, etc. *For more details, please download the PDF or feel free to contact us.

• Resistors
• Other measurement, recording and measuring instruments
• Other power sources