スーパーツール List of Products and Services

Maximum usable equipment weight: 130 kg. The clamp has a mechanism that makes it difficult to come loose during work due to vibrations, thanks to screws, cams, and pads. As the tensile force of the rope (safety line) increases, the cam tilts, increasing the contact surface and providing a stronger grip. With optimal heat treatment, it is tough and has excellent durability.

• Other work tools

This is a clamp with a horizontal escape prevention lever for rebar. It allows for safe and secure vertical lifting of pre-assembled rebar, deformed bars, round bars, etc. The release lock is a center lever type, enabling remote operation via a rope. By raising the remote operation lever, the horizontal escape prevention lever on the side of the main body simultaneously extends, preventing horizontal escape due to upward thrust of the rebar, ensuring safety and reliability.

• Other work tools

It is ideal for the assembly, pressure welding, and extraction of rebar. It can safely and securely lift vertical rebar, deformed bars, round bars, etc. The open lock is a center lever type and can be operated remotely with a rope. There are no extra obstacles on the left and right sides of the main body, allowing for smooth operation during rebar clamping and remote operation. The L-shaped hold blade and cam ensure a secure and safe grip on the rebar during clamping.

• Other work tools

This is a scale with a dedicated hook for forklifts. It can be used immediately by simply setting it on the forklift's forks. Installation is easy, requiring only the tightening of a fixing bolt. With a latch-equipped swivel hook, the hook's orientation is flexible and secure against vibrations.

• Other work tools

This is a scale specifically for the drum lift clamp (DLC0.5).

• Tool Sets

This is a clamp specifically designed for lifting drums. It easily lifts steel drums and other types of drums without a top (lid) using a one-touch grip on the rim. Vertical lifting and tilting of the drums is also easy. *Drums without a rim cannot be lifted. For safety reasons, please refrain from lifting more than five drums at once.

• Other work tools

This is a dedicated lifting clamp for drum cans. It securely locks with simple operation (wedge method). It allows for safe vertical lifting of drum cans. The locking mechanism is easy to operate by simply pushing and pulling the grip. The lifting ring section adopts a large diameter type that allows hooks to be directly attached. *Lifting drum cans without lids is not possible. Please do not use it for lifting drum cans.

• Other work tools

It is ideal for laying and removing steel plates, as well as for lifting operations using wire ropes and sling belts. The large opening makes installation and removal easy. When lifting, the automatic closure lock engages, ensuring safety and reliability. With a swivel eye, it allows for smooth retraction of wire ropes and prevents rotation of steel plates.

• Other work tools

Chain slings can be used safely for long periods compared to wire ropes and similar products. They come with a management capacity display tag. The working load and manufacturing number are clearly indicated. Our chain slings are made according to JIS Grade V, making them lightweight and strong (total length: 1005mm). The SLH3AC features a lever operation that completely releases the lock when removing it, allowing for easy detachment from the workpiece with a crane. The SLH-SC has a swivel eye, which allows for smooth chain retraction and prevents rotation when used with steel plates and similar items.

• Other work tools

The installation and removal work of steel plates, as well as lifting operations for wire ropes and sling belts, are ideal. The large opening makes installation and removal easy. When lifting, the automatic closure lock engages, ensuring safety and reliability.

• Other work tools

When lifted, the automatic closure lock engages, ensuring safety by preventing detachment from the workpiece. When removing, the lever operation fully releases the lock, allowing for easy detachment from the workpiece (removal from the steel plate) using a crane or similar equipment. The large opening makes it easy to attach and detach from the workpiece. NETIS registered item. It was upgraded to NETIS registration number: KK-210076-VE on January 4, 2024.

• Other work tools

It is ideal for lifting and installing cover panels. Lightweight, simple, and extremely easy to use. *For safety, please ensure to use at least two points for lifting.

• Other work tools

It is ideal for the installation and removal of steel plates. The hooks can be easily removed by lifting them while the lock is released.

• Other work tools

This is a simple, versatile lifting clamp that demonstrates its power when suspending particularly complex-shaped steel materials (such as spherical plates and curved plates). It is ideal for lifting, inverting, and pulling operations. The screw cam (spherical universal type) tightening mechanism ensures that the clamp maintains a secure grip even in an unloaded state, and its seismic resistance under load is outstanding. When under load, the cam tilts in proportion to the weight, and the teeth grip firmly and securely. *For lifting, please ensure that at least two-point suspension is strictly followed for safety. Regarding the series of lifting clamps for steel materials, we plan to gradually switch to models equipped with RFID chips compatible with the S, M, A, Я, T management applications. Change details: The basic specifications of the lifting clamp will remain the same after the model change, and the price will also remain unchanged. *When changing models, "RF" will be added to the end of the product number.

• Other work tools

This clamp is ideal for lifting and lowering, especially for lifting pieces such as chain blocks and hoists. When used for horizontal lifting, the screw is positioned at the top (worker's side), making tightening work easy. (It is also possible to tighten from the worker's side when attaching to overhead beams, etc.) The arc-shaped cam is designed to return to its normal position due to the force of a spring. *Please ensure that the screw tightening torque is at least 25 N·m (approximately 250 kgf·cm). *For lifting, always adhere to a minimum of two-point lifting for safety.

• Other work tools

This is a versatile clamp that is especially suitable for lifting pieces such as chain blocks and hoists. The clamping mechanism, which uses a screw cam and an arc-shaped cam (special spring type), ensures a reliable grip even in an unloaded state, and it also offers excellent seismic resistance under load. *For lifting, please ensure to strictly adhere to a minimum of two-point suspension for safety.

• Other work tools

This is a versatile clamp that is especially suitable for lifting pieces such as chain blocks and hoists. The clamping mechanism, which uses a screw cam and an arc-shaped cam (special spring type), ensures that the clamp maintains a secure grip even in an unloaded state, and it also exhibits excellent seismic resistance under load. The tightening confirmation mark is coated with luminescent paint for outstanding visibility. *For lifting, please ensure to strictly adhere to a minimum of two-point suspension for safety.

• Other work tools

This is a versatile model that can perform various tasks such as lifting, lowering, horizontal pulling, and flipping. The clamping mechanism, which uses a screw cam and an arc-shaped cam (with a special spring), ensures a reliable grip even in a no-load state, and its earthquake resistance under load is excellent. *For lifting, please ensure to strictly adhere to a minimum of two-point suspension for safety. *For lifting, please ensure to strictly adhere to a minimum of two-point suspension for safety. Regarding the steel material lifting clamp series, we plan to gradually switch to models equipped with RFID chips compatible with S, M, A, Я, and T management applications. Change details: The basic specifications of the lifting clamps will remain the same at the same price even after the model change. *When changing models, "RF" will be added to the end of the product number.

• Other work tools

It is a versatile type that can perform various tasks such as lifting, lowering, horizontal pulling, and flipping. The tightening degree can be visually confirmed with a safe and secure structure using a twist cam mechanism. The clamping mechanism with a screw cam and an arc-shaped cam (special spring type) ensures a reliable grip even in a no-load state, and its earthquake resistance under load is excellent. The grip strength increases more firmly in proportion to the lifting load. Regarding the steel material lifting clamp series, we plan to gradually switch to models equipped with RFID chips compatible with S, M, A, Я, and T management applications. Change details: After the model change, the price and basic specifications of the lifting clamp will remain the same. *In conjunction with the model change, "RF" will be added to the end of the product number.

• Other work tools

This is a versatile type that can perform all kinds of tasks such as lifting, lowering, pulling, and inverting. When used for horizontal lifting, the screw is positioned at the top (worker's side), making tightening work easy. (It is also possible to tighten from the worker's side when attaching to overhead beams, etc.) The clamping mechanism, which uses a screw and an arc-shaped cam (special spring type), ensures a reliable grip even in an unloaded state, and its earthquake resistance is outstanding. Note: The tightening torque for the screw should be at least 25 N·m (approximately 250 kgf·cm). *For lifting, please ensure that at least two-point suspension is strictly observed for safety.

• Other work tools

It is a versatile type that can perform various tasks such as lifting, lowering, pulling, and inverting. The tightening degree can be visually confirmed with a safe and secure structure using a twist cam mechanism. When used for horizontal lifting, the screws are positioned at the top (worker's side), making tightening work easy. (Tightening can also be done from the worker's side when attaching to overhead beams, etc.) The clamping mechanism with a screw cam and arc-shaped cam (special spring type) ensures a reliable grip even in an unloaded state, and its earthquake resistance under load is excellent. The tightening confirmation mark is highly visible due to the use of luminescent paint. Note: The tightening torque for the screw should be at least 25 N·m (approximately 250 kgf·cm). *For lifting, please strictly adhere to a minimum of two-point suspension for safety.

• Other work tools

It is ideal for lifting, horizontal pulling, and hoisting operations of steel plates, shaped steel, and other materials in various industries such as civil engineering, construction, steelmaking, shipbuilding, and can manufacturing. The shackle can rotate 360 degrees in the lifting (pulling) direction, allowing for stable angle lifting and a wide range of pulling operations. It securely grips with a screw cam and an arc-shaped cam. When lateral loads are applied, the arc-shaped cam tilts proportionally to the size of the load, providing a stronger grip. The arc-shaped cam has a mechanism that always returns to its normal position due to the force of a spring. *Please ensure that the tightening torque value of the screw is 25N·m (approximately 250kgf·cm) or more. *For lifting, please strictly adhere to a minimum of two-point lifting for safety.

• Other work tools

It is a safe and secure structure that allows for visual confirmation of the tightening degree using a twist cam mechanism. It is ideal for lifting, horizontal pulling, and hoisting operations of steel plates, shaped steel, and other materials in various industries such as civil engineering, construction, steel, shipbuilding, and can manufacturing. The shackle can rotate freely 360 degrees in the lifting (tension) direction, enabling stable angle lifting and a wide range of pulling operations. It securely grips with a screw cam and a circular cam. When lateral load is applied, the circular cam tilts in proportion to the magnitude of the load, providing a stronger grip. The circular cam has a mechanism that always returns to its normal position due to the force of a spring.

• Other work tools

It is exclusively for lifting long items. It features a new design that effectively utilizes the lifting height. It is convenient as it allows for span adjustment based on the size and length of the lifted items. *Please use a size suitable for the size, mass, and material of the load being lifted.

• Other work tools

This is a horizontal lifting clamp specifically designed for structural steel (H-shaped, I-shaped, T-shaped, L-shaped, etc.) in a lightweight and compact type. When lifting structural steel, it becomes almost horizontal, which enhances work efficiency. Thanks to the spring mechanism, there is no need to manually support the clamp when it is attached. Additionally, the clamp will not come off even in an unloaded state. The HLC1W features a large-diameter shackle type that makes handling easy. Its mechanically ideal design makes it compact, lightweight, user-friendly, and safe. The arc-shaped pad helps maintain a stable clamping state. *For safety, always ensure to use at least two points for lifting.

• Other work tools

This is a horizontal (level) lifting clamp for steel plates, flat plates, sheet steel, H-beams, etc. Thanks to the spring mechanism, there is no need to manually support the clamp when it is attached. Additionally, the clamp will not come loose even in an unloaded state. The safety point settings on the main body make safety inspections and handling easy. *For safety, please ensure that at least two-point lifting is strictly observed.

• Other work tools

・LIFTING CLAMPS CATALOGUE ・General Catalogue Full Contents ・GENERAL HAND TOOLS & CLAMPS ・TORQUE WRENCHES ・PIPING TOOLS ・CRANES ・LIFTING CLAMPS FOR STEEL ・LIFTING CLAMPS FOR CONCRETE MATERIAL ・LIFTING CLAMPS FOR HOUSING ・GEAR PULLERS ・HYDRAULIC TOOLS ・MICRO AIR GRINDERS & CARBIDE BURS ・JIGS CLAMPING TOOLS ・KNURLING HOLDERS & BITE HOLDERS ・MAGNETIC SEPARATION

• Other work tools

It is a free indirect style. During lifting, the joints operate based on the pre-bent direction. Bolts can be fixed to the flanges by drilling bolt holes in the H-beam columns of buildings, allowing for assembly and installation. Even in low-ceiling areas, the absence of a pulling section from above allows for effective use of space. The assembly and disassembly of the arms are very simple. The central joint of the arm can bend 180° to the left and right, ensuring a wide working range.

• crane

It is a free indirect style. During lifting, the joints operate from a predetermined bent direction. Fixed plates can be welded and installed on pillars of buildings, etc. Even in low ceiling areas, there is no pulling part from above, allowing for effective use of space. Assembly and disassembly of the arms is very simple. The central joint of the arm can bend 180° to the left and right, ensuring a very wide working range.

• crane

It is a free indirect method. During lifting, the joint operates from the pre-bent direction. Tighten the fastening device to the column to secure it. It does not damage the column and is ideal for steel structures. Even in low-ceiling areas, there are no pulling parts from above, allowing for effective use of space. The assembly and disassembly of the arm are very simple.

• crane

It is a free indirect style. During lifting, the joints operate from the pre-bent direction. It can be fixed and installed by welding to the building's columns or bolting to H-beam columns. Assembly and installation are easy, achieving a low price.

• crane

It features a free-moving arm slide system. Bolt holes can be drilled into H-beam columns of buildings, allowing for assembly and installation by securing the flange with bolts and nuts. There are no overhead pulling parts, making it possible to effectively utilize the space even in areas with low ceilings. The assembly and disassembly of the arm is very simple. The power cord has been extended to a length of 10 meters, so it can be used immediately after installation.

• crane

It is a free indirect style. When lifting, the joints move from the pre-bent direction. It can be fixed and installed with anchor bolts at any location on the concrete floor.

• crane

It is a free indirect style. When lifting, the joints operate from the pre-bent direction. It can be fixed in any location on a concrete floor with anchor bolts. It is ideal for use in places where there are no nearby fixed columns, the ceiling is high, and it cannot be fixed anywhere other than the floor. The assembly and disassembly of the arm are very simple. The central joint of the arm can bend 180° to the left and right, ensuring a very wide working range. When there are no obstacles around, the entire arm can rotate 360°, further expanding the working range.

• crane

Free Arm Slide Type Fixed installation with anchor bolts at any location on a concrete floor. Ideal for use in places where there are no nearby fixed columns, the ceiling is high, and it cannot be fixed anywhere other than the floor. Assembly and disassembly of the arm are very simple. The power cord has been extended to a length of 10 meters, so it can be used immediately after installation.

• crane

The arm length is adjustable in three stages, and the lifting load remains the same at any position. Movement can be done smoothly with wheels. The arm drive uses hydraulic power, allowing for easy vertical movement. You can lift and lower loads with a manual winch. The arm and legs are foldable, making it compact and usable anytime and anywhere. Please refer to the catalog.

• crane

It is possible to move while lifting the load. The arm's vertical movement is hydraulic. The arm length is adjustable in three stages. It is ideal for various maintenance tasks and loading/unloading cargo onto vehicles. The legs are U-shaped, so they do not take up much space.

• crane

Winch-operated. Ideal for job sites without crane equipment. Movement is smooth with four omnidirectional wheels. Manual winch allows for lifting and lowering of loads. The arm and legs are foldable, making it compact and usable anytime, anywhere.

• crane

It is ideal for lifting and moving in work sites without crane equipment. Movement can be done smoothly with four omnidirectional wheels. The arm drive uses hydraulics, allowing for easy vertical movement. The arm and legs are foldable, making it compact and usable anytime, anywhere.

• crane

It is possible to move while the load is suspended. When using one outrigger, the arm can rotate up to 60° to the left and right. If installed on the opposite side, it can rotate 120° (the second one is sold separately). The manual winch allows for lifting and lowering of the load. It is compact and foldable, making it usable anytime and anywhere. The arm can be adjusted in two stages (900mm and 1,100mm) with a locking pin, allowing it to reach deeper areas and improve work efficiency.

• crane

The gate can be manually adjusted in five levels (in 200 mm increments). It is ideal for job sites without crane equipment. It can be stored compactly, making it convenient and easy to handle.

• crane

The lateral movement of the hoist can be performed smoothly with a trolley chain. It is ideal for work sites without crane equipment.

• crane

Lightweight yet sturdy, easy to assemble and disassemble, and convenient to carry and move.

• crane

The gate can be manually raised and lowered, compactly stored, and is easy and convenient to handle. It is lightweight yet strong, easy to assemble and disassemble, and easy to carry and move. The gate can be manually adjusted in five levels (in 200mm increments).

• crane

~Key Points of the GCW Series!~ It enables the tightening of connected pipe nuts, which is difficult with conventional gear wrenches. (Applicable hexagonal sizes: 10, 12, 13, 14, 17, 19 mm) The straight type with a ratchet mechanism allows for continuous operation without the need to remove and reinsert, and the ratchet side is now joined by a flex type that can swivel 180°.

• Spanners and wrenches