ケーエンジニアリング Product Lineup

FFT Logger 2 is an optional app for the Simple FFT Comparator. This app allows full control of the Simple FFT Comparator from a PC. It features frequency analysis, saving settings, FFT data logging, animated playback of logged data, and bulk display of data through time series representation. These features enable it to be used as a vibration data logger, noise data logger, and acoustic data logger. A free trial version is available. You can use the included sample data to try out data playback and editing. It can be downloaded from our website, so please give it a try.

• Data Logger
• Other electronic measuring instruments
• Other FA equipment

Your oscilloscope becomes a vibration meter! Bolt-on to the oscilloscope This product is a set of a piezoelectric accelerometer probe and a preamplifier. It outputs 100mV per 1m/s² of acceleration, allowing sufficient measurement even with an 8-bit oscilloscope. ■Features - Adjustable sensitivity: 0.1mV/m/s² to 100mV/m/s² - Wide frequency response: 2 to 20kHz - Battery operation supported: 006P battery ■Applications: Vibration measurement, inspection, etc. using oscilloscopes, data recorders, and FFT analyzers.

• Sensors
• Sensors
• Vibration Inspection

We would like to introduce optional parts for the Simple FFT Comparator. We offer a wide range of options, including piezoelectric accelerometers (vibration sensors), microphones with preamps (acoustic microphones), and FFT data logger PC applications. Our company develops electronic application devices such as measurement instruments and information equipment. If you have any issues with electronic application devices, please feel free to consult us.

• Sensors

Frequency analysis for 48,000 yen! The "Simple FFT Comparator" is a low-cost embedded FFT analyzer that offers fast analysis and easy operation. It allows for frequency analysis of vibrations and acoustics with simple controls. It can make determinations without a monitor and features real-time data output of FFT analysis results, making it ideal for IoT edge computing. Used in conjunction with vibration sensors, it serves as a motor inspection tool and bearing checker. Additionally, it can detect tool breakage and function as a vibration comparator. When combined with a microphone, it can be used for acoustic analysis and abnormal sound detection. In conjunction with a current sensor, it can be used for discharge detection in transformers and monitoring motor failures. With embedded operation without a monitor, it can serve as a permanent monitoring device for vehicles in cars, trains, and aircraft. The FFT analyzer is a frequency analysis device that represents the distribution of frequencies contained in various signals. Below are the introduction videos. ■ Short version: 5 minutes https://youtu.be/oKxSC8KbRlQ ■ Long version: 15 minutes https://youtu.be/pJzpwEliiJA

• Data Logger
• Other embedded systems (software and hardware)
• Software (middle, driver, security, etc.)

For 48,000 yen, vibration analysis, vibration measurement, and vibration monitoring are available. The FFT analyzer is a frequency analysis device that represents the distribution of frequencies contained in various signals. The "Simple FFT Comparator" is a low-cost embedded FFT analyzer with high-speed analysis and easy operation. It allows for frequency analysis of vibrations and acoustics with simple operation. It features real-time data output of FFT analysis results. When used in conjunction with vibration sensors, it can be utilized for motor inspections and bearing checks. Additionally, it can detect tool breakage and serve as a vibration comparator. When used with current sensors, it can detect discharge in transformers and monitor motor failures. By operating without a monitor, it can be used as a vibration monitoring device for vehicles such as cars, trains, and aircraft. Here are the introduction videos: ■ Short version: 5 minutes https://youtu.be/oKxSC8KbRlQ ■ Long version: 15 minutes https://youtu.be/pJzpwEliiJA

• Data Logger
• Other embedded systems (software and hardware)
• Software (middle, driver, security, etc.)

Frequency analysis for 48,000 yen! The "Simple FFT Comparator" is a low-cost embedded FFT analyzer that offers fast analysis and easy operation. An FFT analyzer is a frequency analysis device that represents the distribution of frequencies contained in various signals. The Simple FFT Comparator allows for easy frequency analysis of vibrations and acoustics. It features real-time data output of FFT analysis results, making it ideal for IoT edge computing. When used in conjunction with a vibration sensor, it can be utilized for motor inspection and bearing checking. Additionally, it can detect tool breakage and serve as a vibration comparator. When paired with a microphone, it can be used for acoustic analysis and abnormal sound detection. When combined with a current sensor, it can be used for discharge detection in transformers and monitoring motor failures. By operating without a monitor, it can serve as a permanent monitoring device for vehicles in cars, trains, and aircraft. Below are the URLs for the introduction videos. ■ Short version: 5 minutes https://youtu.be/oKxSC8KbRlQ ■ Long version: 15 minutes https://youtu.be/pJzpwEliiJA

• Data Logger
• Other embedded systems (software and hardware)
• Software (middle, driver, security, etc.)

Frequency analysis for 48,000 yen! The "Simple FFT Comparator" is a low-cost embedded FFT analyzer that offers high-speed analysis and easy operation. It is equipped with real-time data output functionality. Used in conjunction with vibration sensors for vibration analysis, vibration measurement, motor inspection, and bearing checking. It can also be used with vibration and current sensors for detecting tool damage and as a vibration comparator. When used with a microphone, it can perform acoustic analysis and detect abnormal sounds. Utilizing real-time output, it enables IoT integration for vibration measurement. The FFT analyzer is a frequency analysis device that represents the distribution of frequencies contained in various signals. 【Features】 ■ Easy operation comparable to a tester ■ High-speed analysis (FFT analysis cycle of 20Hz) ■ Capable of operation without a monitor, ready for integration into devices ■ Equipped with comparator functionality, with judgment results output via relay ■ Built-in amplifier allows direct driving of piezoelectric sensors and microphones ■ Real-time output of FFT analysis results (serial communication) Here are the videos. ■ Short version: 5 minutes https://youtu.be/oKxSC8KbRlQ ■ Long version: 15 minutes https://youtu.be/pJzpwEliiJA

• Other electronic measuring instruments
• Vibration Testing
• Data Logger

KE Engineering develops measurement instruments, circuit design, secondary battery measurement devices, and charging control circuits. We possess a wide range of measuring instruments and devices, including oscilloscopes, constant temperature baths, and machine tools. We have numerous development achievements, including low signal amplification circuits, Battery Management Units (BMUs), and three-phase AC inverters. If you need circuit or software development, please leave it to us. 【Business Description】 ■ Development of measurement instruments, circuit design, secondary battery measurement devices, and charging control circuits - Hardware: Signal amplification circuits, power control circuits, pattern design - Software: Control software, application software development for various operating systems We have created an introductory video for our product "Simple FFT Comparator." Here are the URLs. Please take a look. ■ Short version: 5 minutes https://youtu.be/oKxSC8KbRlQ ■ Long version: 15 minutes https://youtu.be/pJzpwEliiJA *For more details, please refer to the PDF document or feel free to contact us.

• Data Logger
• Other information systems

The "Lamp Monitoring Email Kit" is a simple monitoring system that attaches a light sensor to the lamp part of a device, sending an email when the lamp turns on or off. For example, it can be used to monitor the warning light of a machine tool and send an email to a mobile phone when processing is complete, or it can be attached to warning lights of factory equipment to send an email to the responsible person when an error occurs. Additionally, it can be used in various ways, such as measuring the operating time of the device based on the email sending date and time. By preparing and connecting multiple kits, simultaneous monitoring of up to 10 locations is possible. 【Features】 ■ Simple and low cost ■ Equipped with a sensitivity adjustment knob for the lamp ■ Compatible with a wide range of usage environments ■ Email sending can be selected as "send on lamp on" or "send on lamp off" ■ Free email services like Google's Gmail can be used for the sending account *For more details, please refer to the PDF materials or feel free to contact us.

• Other security and surveillance systems
• Other production management systems
• others

The "Infrared Radiation Temperature Logger" is a thermopile-type measuring instrument that allows for safe temperature measurement without touching the object, using infrared technology. With easy-to-use PC software, data can be recorded in files. Additionally, up to six temperature sensors can be added for simultaneous observation. It can be used for a wide range of applications, including temperature measurement, abnormal monitoring, and heat source detection. 【Features】 ◎ Safe measurement due to non-contact method. Excellent responsiveness. ◎ Non-contact measurement does not affect the object being measured. ◎ Easy-to-use PC software for data recording in files. ◎ Up to six temperature sensors can be added for simultaneous observation. ◎ The sensor base is movable and equipped with a magnet for easy fixing. ◎ Suitable for a wide range of applications, including temperature measurement, abnormal monitoring, and heat source detection. ◎ High directional characteristics with a measurement distance of 100mm and a measurement diameter of 12.8mm. *For more details, please download the PDF or feel free to contact us.

• Data Logger
• Sensors
• Other food machinery