ナックフィーディング List of Products and Services

This product is a separator that collects grease and other substances flowing down from the sink using a dedicated NAC filter, preventing them from flowing into the drainage pipes. It drains the water from the sink in a clean state. Even when the volume of draining water is high, the electric motor provides assistance. Additionally, the dedicated NAC filter can be easily replaced from above the sink. 【Features】 ■ Easy installation ■ Easy maintenance ■ Assists with grease traps ■ Stops grease and other substances by passing through the dedicated filter ■ Electric motor assists even when the volume of draining water is high *For more details, please refer to the PDF document or feel free to contact us.

• Piping Materials

This product is a combination machine that, by adopting a new combination method, demonstrates capabilities that significantly exceed those of conventional machines while maintaining a compact structure, achieving easy maintenance and stable operation. The combination of the newly developed transfer mechanism and combination mechanism enables stable supply of cotta and reliable integration into the retainer. Additionally, it comes standard with a hopper specifically designed for the slimline feeder, eliminating the need for additional supply devices and space. 【Features】 ■ High-speed assembly ■ Ultra-compact ■ Stable operation ■ Easy maintenance ■ Comes standard with a dedicated hopper, eliminating the need for additional supply devices and space *For more details, please refer to the PDF materials or feel free to contact us.

• Assembly Machine

The "Pattol 1200F" is a revolutionary grease separation and recovery device that physically collects grease and other substances, eliminating the need for daily scooping and preventing the occurrence of unpleasant odors. By separating and recovering, it prevents the environmental impact caused by the leakage of grease and other substances into the sewer system. With a linear actuator and a link-type scraper, it replicates human hand movements, smoothly scraping out the grease that has floated to the surface in the grease separation tank and accurately collecting it. 【Features】 ■ Installed in grease interceptors laid on kitchen floors and other areas ■ The grease separation tank has a sealed structure to prevent the occurrence of unpleasant odors and pests ■ The operating mode can be switched with a toggle switch, allowing for automatic operation, manual operation, or stopping ■ Automatic operation can be set with a 24-hour timer to establish a running cycle in 15-minute intervals *For more details, please refer to the PDF document or feel free to contact us.

• Oil-water separator

The "Pattol 15F" is a revolutionary grease separation and recovery device that physically collects grease and other substances, eliminating the need for daily scooping and cleaning, and preventing the occurrence of unpleasant odors. It prevents environmental impacts caused by the leakage of grease into the sewage system. Additionally, it features a compact design that can be stored under sinks while ensuring sufficient separation performance. 【Features】 ■ Efficient recovery ■ Easy operation ■ Compact design ■ Cleaning work *For more details, please refer to the PDF document or feel free to contact us.

• Oil-water separator

The "Pattol 900R" is a maintenance-free oil-water separation device capable of high-speed separation. It is suitable for large cleaning tanks of over 1000 liters, as well as cooling water tanks and waste liquid treatment tanks, and large water tanks such as centralized coolants. Additionally, by adopting a step method, it enables high-precision oil-water separation. It can also handle foamy liquids with its foam-cutting slit. 【Features】 ■ Advanced oil-water separation performance ■ Rapid removal capability ■ No new waste generated ■ Compact and easy to install ■ Excellent durability ■ Easy maintenance ■ Reduction of total costs *For more details, please refer to the PDF document or feel free to contact us.

• Oil-water separator

The "Pattol 300R" is an industrial oil-water separation device designed for versatile tanks ranging from 200 to 1000 liters. It features a maintenance-free design that does not burden on-site personnel and is compact, taking up minimal space. Additionally, there are no consumables required for separating oil, so no waste is generated other than the separated oil. 【Features】 ■ Advanced oil-water separation performance ■ Rapid removal capability ■ No new waste generated ■ Compact and easy to install ■ Excellent durability ■ Easy maintenance ■ Reduced total cost *For more details, please refer to the PDF document or feel free to contact us.

• Oil-water separator

The "Pattol 180S" is an oil-water separation device that focuses solely on oil-water separation. It can recover oil using only the difference in specific gravity without the need for consumables like filters, making it a high-performance environmental product that does not generate new waste. Additionally, the stainless steel body enhances durability. The float-type nozzle, which follows water level fluctuations, can operate up to two units simultaneously, efficiently recovering floating oil. 【Features】 ■ Advanced oil-water separation performance ■ Rapid removal capability ■ No new waste generated ■ Compact and easy to install ■ Excellent durability ■ Easy maintenance ■ Reduction in total costs *For more details, please refer to the PDF document or feel free to contact us.

• Oil-water separator

The "Pattol 180R・RD" is an oil-water separation device that focuses solely on oil-water separation. It can recover oil using only the difference in specific gravity, without the need for consumables like filters, making it a high-performance environmental product that does not generate new waste. Additionally, the stainless steel body enhances durability. 【Features】 ■ Advanced oil-water separation performance ■ Rapid removal capability ■ No new waste generated ■ Compact and easy to install ■ Excellent durability ■ Easy maintenance ■ Reduction in total costs *For more details, please refer to the PDF document or feel free to contact us.

• Oil-water separator

The "Screw-type O-ring supply machine" is a supply machine that enables reliable and stable supply of O-rings, which is difficult with vibration or air methods, through a new method utilizing screws. By uniquely holding and driving the screws, it allows for long hours of continuous automatic supply when combined with a supply hopper. 【Features】 ■ Stable supply ■ Reliable separation ■ Compatible with various types of workpieces ■ Continuous automatic supply possible ■ Low noise *For more details, please refer to the PDF document or feel free to contact us.

• Parts feeder

Our "High-Speed Feeder for Shaft Parts" achieves up to twice the speed of conventional models by adopting a new vibration system. The alignment unit (tooling section) is linear, and since there are no vibration components in directions other than the transport direction, it can provide stable alignment and supply of long shaft-like parts, making it suitable for pins with a larger length-to-diameter ratio than before. The alignment unit has high compatibility due to precision machining tooling. It is easy to change setups simply by exchanging units for workpieces of different diameters, and replacements during wear are also straightforward. 【Features】 ■ High-speed stable supply ■ Applicable to long shaft-like parts ■ Easy setup changes ■ Provides stable driving force ■ Simple structure and wide range of applications ■ No restrictions on installation conditions *For more details, please refer to the PDF document or feel free to contact us.

• Parts feeder

The "Nack Feeding Parts Feeder" adopts a simple principle of tooling, offering advantages such as high precision, high performance, low failure rates, and easy maintenance. By utilizing the stable posture probability of parts and other statistical probabilities, it allows for selective sorting of only the desired posture parts, enabling a method that is simple yet highly accurate. Additionally, we propose a "Total Parts Feeding System" that supports all aspects of development design, manufacturing, and maintenance without borders. Through this pioneering system, we provide excellent quality and cost performance. 【Features】 ■ Simple structure ■ Proficient in probabilistic alignment methods ■ One person is responsible for completing one machine, or one machine per group ■ Certification of top-class qualifications ■ Comprehensive aftercare *For more details, please refer to the PDF materials or feel free to contact us.

• Parts feeder

The "Sui Pack" is a revolutionary processing agent that solidifies shakes and soft serve for disposal. When shakes or soft serve are poured down the sink, they can solidify into a cloth-like mass in the grease trap, causing blockages in the drainage pipes. Additionally, if disposed of as is, they are treated as industrial waste, requiring disposal procedures that can be costly. This product can solidify 3 kg of shakes or soft serve with just one bottle, allowing for disposal as regular waste. 【Features】 ■ Solidifies shakes and soft serve ■ Can process 3 kg with one bottle *For more details, please refer to the PDF document or feel free to contact us.

• Cleaning agents
• Other consumables

Nack Feeding has been making unceasing efforts since we began working in the parts feeder field in 1976. Our management philosophy advocates "User First Principle" and "120% Satisfaction Principle," and we respond to user needs by emphasizing comprehensive capabilities in all areas, including thorough hearing, development, manufacturing, sales, and support. 【Business Content】 ■ Production and design of parts feeder attachments and peripheral devices ■ Development, production, and sales of environmental devices (such as oil-water separation devices) *For more details, please refer to the PDF materials or feel free to contact us.

• Parts feeder
• Oil-water separator

The "Slim Line Series" is a parts supply system that achieves top-level performance in an extremely small space through the development of a drive system. By connecting the return side chute with a linear feeder and rod drive (patented), it enables the control of all functions from parts supply to alignment and delivery with a single control unit. Additionally, compared to conventional methods that combine bowl feeders and linear feeders, it is slimmer in width, completely eliminating unnecessary space. 【Features】 ■ Achieves all alignment and supply functions with a single drive system ■ Can be installed in less than half the space of conventional systems ■ Compatible with a wide variety of workpieces *For more details, please download the PDF or feel free to contact us.

• Parts feeder