フレックタイム List of Products and Services

The "FT-SW" is an 8-port signal selector with a frequency range of DC-100MHz. The case size is 44(H)×430(W)×260(D)mm. The installation environment is a temperature of 0 to +55℃ and humidity of 0-90%. A power cable is included as an accessory. 【Features】 ■ Interface: LAN (TCP-IP), RS-232C ■ Case size: 44(H)×430(W)×260(D)mm ■ Power: AV90V-240V, <10W ■ Installation environment: Temperature 0 to +55℃, Humidity 0-90% ■ Accessories: Power cable *For more details, please refer to the PDF document or feel free to contact us.

• Other electronic parts

The "FT-PPFC" is a high-precision phase and frequency control device that can output reference signals from atomic clocks and other sources with high resolution, allowing for the generation of accurate time systems. The case size is 430(W) x 88(H) x 430(D) mm. It can support ultra-high precision output as an option. 【Features】 ■ Capable of controlling the frequency and phase of output reference signals from atomic clocks and other sources with high resolution. ■ Enables the generation of accurate time systems. *For more details, please refer to the PDF document or feel free to contact us.

• Other electronic parts

The "FT-GNSDA-8" from Flextime Corporation is a receiving signal splitter used to supply the received signal from a single receiving antenna to multiple receiving devices. The frequency range covers 1.2 to 1.8 GHz, making it capable of receiving multi-frequency signals. The antenna supply voltage can be selected between on/off and +3.3V and +5V using a slide switch on the rear panel, expanding the selection range for antennas. 【Features】 ■ Supplies the received signal from a single receiving antenna to multiple receiving devices ■ Covers a frequency range of 1.2 to 1.8 GHz ■ Capable of receiving multi-frequency signals ■ Built-in amplifier ■ Inline amplifier can be omitted *For more details, please refer to the PDF document or feel free to contact us.

• Other electronic parts

Flectime Corporation provides applications in the field of time and frequency standards using positioning satellite systems, including GPS. We contribute to the infrastructure of the industrial sector through our time-frequency remote calibration system. Leveraging our research and development experience, we offer accurate frequency and time in an easy-to-use format. 【Features】 ■ Provides applications in the field of time and frequency standards using positioning satellite systems, including GPS ■ Contributes to the infrastructure of the industrial sector through the time-frequency remote calibration system ■ Offers products and technologies in the field of time and frequency standards *For more details, please refer to the PDF materials or feel free to contact us.

• Time-frequency measurements
• Other electronic parts

Flectime Corporation provides applications in the field of time and frequency standards using positioning satellite systems, including GPS. We contribute to the infrastructure of the industrial sector through our time-frequency remote calibration system. Leveraging our research and development experience, we offer accurate frequency and time in an easy-to-use format. 【Features】 ■ Provides applications in the field of time and frequency standards using positioning satellite systems, including GPS ■ Contributes to the infrastructure of the industrial sector through the time-frequency remote calibration system ■ Offers products and technologies in the field of time and frequency standards *For more details, please refer to the PDF document or feel free to contact us.

• Time-frequency measurements
• Other electronic parts

We are a technology transfer venture company of the National Institute of Advanced Industrial Science and Technology, and we are offering technical materials on "Calibration of Measurement Standards and Remote Calibration System for Time and Frequency" free of charge. This document discusses the importance of calibration of measurement standards, the international mutual recognition (MRA) of measurement standards that contribute to free trade, the traceability system, as well as issues and solutions related to calibration in the field of time and frequency. [Contents (excerpt)] ■ Importance of Calibration of Measurement Standards ■ International Mutual Recognition (MRA) of Measurement Standards and Traceability System Contributing to Free Trade ■ Issues and Solutions in Calibration in the Field of Time and Frequency ■ Research on the Mechanism of Solutions and Its Results: Conceptual Diagram of e-trace, etc. *For more details, please refer to the PDF document or feel free to contact us.

• Other information systems

Flextime Corporation is a venture company established by researchers and engineers who were affiliated with a time and frequency standards research institution. Our main product, the time and frequency remote calibration system, enables the provision of reference signals synchronized with national standards. Additionally, to promote the development of this field, we also offer advice and consulting as part of our services, so we would be happy to hear from you. 【Business Description】 ■ Manufacturing of electronic devices (especially GPS-related equipment) Consulting related to time and frequency standards, etc. *For more details, please refer to the PDF document or feel free to contact us.

• Time-frequency measurements
• Other electronic parts

The NC-100B is a high-precision clock device with a crystal oscillator that calibrates the time accurately by receiving time signals from NHK's FM radio broadcasts through its built-in FM radio. The output interface uses Ethernet and implements NTP, making it suitable for time synchronization in computer networks. 【Features】 ■ Crystal oscillator ■ Calibrates the time accurately by receiving time signals from NHK's FM radio broadcasts ■ Output interface uses Ethernet and implements NTP ■ Well-suited for time synchronization in computer networks *For more details, please refer to the PDF document or feel free to contact us.

• others

Introducing the standard clock "AQ-250." This product receives NHK FM and adjusts the internal clock time based on the time signal. It displays the time on the front panel and can output time signals through various interfaces. 【Features】 ■ Receives NHK FM and adjusts the internal clock time using time signals ■ Displays the time on the front panel ■ Capable of outputting time signals through various interfaces *For more details, please refer to the PDF document or feel free to contact us.

• others

The NC-101B is a high-precision clock device driven by signals from external accurate reference oscillators such as Rb oscillators. The output interface uses Ethernet and implements NTP, making it suitable for time synchronization in computer networks. 【Features】 ■ Driven by signals from external accurate reference oscillators such as Rb oscillators ■ Output interface uses Ethernet and implements NTP ■ Well-suited for time synchronization in computer networks *For more details, please refer to the PDF document or feel free to contact us.

• others

The "FT-PDA" is a pulse distributor that accepts a 1 pps pulse signal or a 10 MHz CW input and has 8 ports for 1 pps output. The delay time between input and output is <50 ns, and the delay deviation between outputs is <1 ns. It can be used in environments with temperatures from 0 to +55 degrees and humidity from 0 to 90%. 【Specifications (excerpt)】 ■ Input Signal - Frequency: 10 MHz or 1 pps (switchable via toggle switch) - Level: +7 dBm ± 5 dBm (10 MHz), 5 to 3.3 V (1 pps) ■ Output Signal - Pulse Signal: 1 pps - Delay Time between Input and Output: <50 ns - Delay Deviation between Outputs: <1 ns - Number of Outputs: 8 *For more details, please refer to the PDF document or feel free to contact us.

• Other electronic parts

The "FT-RB" is a rubidium oscillator for generating a 10MHz reference signal. If you have a GPS-dependent oscillator, you can synchronize it with GPS by inputting a GPS 1pps signal from an external source. If you do not have one, you can optionally incorporate GPS synchronization functionality. 【Features】 ■ Generates a 10MHz reference signal ■ Equipped with national standard automatic synchronization function (NMI-DO mode) ■ Equipped with external oscillator time comparison function (time comparison mode) ■ Oscillator selection available according to application *For more details, please refer to the PDF document or feel free to contact us.

• Other electronic parts

The "FT-XTAL" is a double oven-type OCXO for generating a 10MHz reference signal. It provides a high-purity reference signal. GPS synchronization functionality can be added as an option. 【Size】 <19-inch rack 1U size> ■44(H) ×430(W)×350(D) mm (excluding rack mount and connector parts) *For more details, please refer to the PDF document or feel free to contact us.

• Other electronic parts

The "FT-001A" is a handheld-sized device developed for direct connection to measuring instruments, intended for time-frequency remote calibration-related applications. It calculates the time difference with the national standard via the internet and automatically adjusts the frequency of the built-in oscillator to ensure the difference is zero. This allows the built-in oscillator to synchronize with the national standard, enabling the use of highly stable signals. Additionally, in the event of network failure, it automatically switches to GPS synchronization, ensuring security is maintained. Remote calibration is also possible for the output. 【Features】 ■ Portable frequency standard model ■ Equipped with automatic synchronization function to the national standard *For more details, please refer to the PDF document or feel free to contact us.

• Other electronic parts

The "FT-001SH model" is a time-frequency remote calibration device developed for use in standard rooms and calibration rooms of various operators. By establishing a network connection, it is possible to synchronize the built-in oscillator with the time-frequency standard of the National Institute of Advanced Industrial Science and Technology with high precision. Additionally, built-in oscillators such as TCXO and double oven OCXO are available as options to meet user needs. 【Features】 ■ Desktop model ■ Equipped with automatic synchronization function to national standards (NMI-DO mode) ■ Equipped with external oscillator time comparison function (time comparison mode) ■ Oscillator selection available according to application (TCXO, OCXO, Rubidium) *For more details, please refer to the PDF document or feel free to contact us.

• Other electronic parts

The "FT-DA(2U)" is a distribution amplifier designed to distribute a reference signal (1-20 MHz) and has 8 output ports. The case size is a desktop type with a height of EIA 2U and a width of approximately 21 cm. The gain can be specified between 0 - +3 dB at the time of order. 【Case Size】 <FT-DA/H Desktop Type 2U> ■220(W)×88(H)×280(D)mm (excluding connectors) *For more details, please refer to the PDF document or feel free to contact us.

• Other electronic parts

The "FT-DA(1U)" is a distribution amplifier designed to distribute a reference signal (1-20 MHz) and has 8 output ports. The case size is a 19-inch rack mount type with a height of EIA 1U. The gain can be specified between 0 - +3 dB at the time of order. 【Case Size】 <FT-DA 19” Rack (EIA Standard) Embedded Type 1U> ■430(W)×44(H)×260(D)mm (excluding rack mount and connectors) *For more details, please refer to the PDF document or feel free to contact us.

• Other electronic parts

The "FT-DO High Precision GPS Synchronized OCXO" is designed as a reference signal source for measurement and as a reference signal source for audio equipment, providing high purity and high stability reference signals. It is possible to select GPS synchronization mode for the built-in oscillator, and if a high purity reference signal source is required, it can be used by selecting the latter. 【Features】 ■ Provides high purity and high stability reference signals ■ GPS synchronization mode selection available *For more details, please refer to the PDF document or feel free to contact us.

• Time-frequency measurements
• Other electronic measuring instruments

The "FT-DA" is a distribution amplifier designed to distribute reference signals and has 8 output ports. We offer "FT-DA (1U type)" and "FT-DA/H (2U type)". 【Specifications】 ■Input Signal ・Frequency: 1MHz to 15MHz ・Input Level: 0-13dBm @ 50Ω ■Power Supply ・AC90–240V, 1A or less *For more details, please refer to the PDF document or feel free to contact us.

• Calibration and repair

The "FT-001S" is a device developed for time-frequency remote calibration. It has the capability to automatically perform calibration with higher authorities using the GPS satellite common-view method. By establishing a network connection, it is possible to synchronize the built-in oscillator with the time-frequency standard of the National Institute of Advanced Industrial Science and Technology (AIST) with high precision. It can provide a reliable reference signal at a low cost. 【Features】 ■ Achieves high-precision comparison using the Common-view method that mediates GPS L1 C/A code signals ■ Synchronizes the built-in oscillator to the national standard using publicly available data from AIST (NMIJ-DO function) ■ Traceability for external DUTs ■ Functions as a time comparison receiver through the time comparison feature ■ Various built-in oscillators are prepared to meet user needs, etc. *For more details, please download the PDF or feel free to contact us.

• Calibration and repair