牧野工業 List of Products and Services

Our company is engaged in the development of cases for dental-related tools that share many commonalities with other tools. We offer a lineup of cases for dental-related tools, including cases for scaler tips, FG bars, and piezo scalers. We will manufacture and sell cases for ultra-hard/diamond bars and more. 【Features】 - For scaler tips, FG bars, piezo scalers, files/reamers - Scaler tips are available in five different shank diameters *For more details, please refer to the PDF document or feel free to contact us.

• Storage

The "Holder for FTB" is a holder that can hold 10 pieces for φ2.34, φ3, φ4, and φ6. We offer two sizes of holder heights, M size and L size, to match the case of the main unit. The holder can be fixed in your preferred position within the case, and you can choose the holder according to the effective length. 【Features】 ■ 10-piece holder for four types of shank diameters (φ2.34, φ3, φ4, φ6) ■ The combination position for the FTB main unit case can be freely changed ■ Since it is a shank-fixed type, it can also be used as a carrying box ■ Depending on the combination, it can store up to φ4 with a total length of 122mm *For more details, please refer to the PDF document or feel free to contact us.

• Storage

The "SMK Holder" is a side-entry shank fixed holder. By simply combining it with the corresponding case for each holder, attachment and detachment are easy. Using PP material allows for clear visibility of the stored items. 【Features】 ■ Side-entry shank fixed holder compatible with diameters from φ1.6 to φ12.5 ■ Properly holds the shank while keeping the cutting edge suspended ■ A total of 22 types of holders are available to combine with 5 types of main cases ■ Can accommodate products with a thicker tip compared to the shank *For more details, please refer to the PDF document or feel free to contact us.

• Storage

The "AP/BIK Type Reducer Shank Holder" is a holder for the AP series BIK center tool case. Simply combine the holder that matches the inner diameter hole of the AP/BIK for easy attachment and detachment. It can accommodate diameters from φ1.0 to φ25, with a maximum total length of 300mm. 【Features】 - Can be converted to a reducer shank hold case just by attaching it to the inner diameter hole of the AP/BIK. - There are a total of 11 types of reducer shank holders. - Diameters available start from φ1, which can be difficult to store. *For more details, please refer to the PDF document or feel free to contact us.

• Storage

The "Base Tray Sheet" is a sheet that is laid on the bottom surface of the base tray. The size is common to all sheets, measuring 300mm x 220mm. It can be used differently depending on the specifications and purposes. We offer a lineup of four types. 【Features】 ■ Lineup (4 types) - Stainless steel plate, transparent plastic sheet, black plastic mesh, rubber sheet ■ Can be used differently depending on the application *For more details, please refer to the PDF document or feel free to contact us.

• tray

The "Rubber Tray" can be used as a lid or a receiving tray for a base tray or square tray. It can also be used as a mat for 5S management. Due to its non-slip properties, it is also effective as a work mat for small items. 【Features】 ■ Can be used as a mat for 5S management ■ Non-slip, making it effective as a work mat for small items *For more details, please refer to the PDF document or feel free to contact us.

• tray
• Rubber

The "partition" is a divider part for base trays and half trays. By combining parts, you can freely partition the base trays and half trays, and it is possible to use them in conjunction with other parts. The material used is a nylon-based composite resin, with a heat resistance temperature of 230 degrees. We offer 13 items in 2 types. 【Features】 ■ RT Type - A part that can be inserted into the middle section of the divider. * It cannot be assembled in a cross shape. ■ LT Type - A part that can connect to the sides of the base tray or other parts. * It cannot be inserted into the middle section. * For more details, please refer to the PDF document or feel free to contact us.

• others

The "Rubber Mat: Silicone Rubber" is a pyramid-shaped rubber mat. It can be placed in any direction, both vertically and horizontally. Its rubber material makes it slip-resistant, and it is designed to minimize contact between stored items. There are two types of materials available, allowing you to choose according to your needs. Additionally, it is suitable for transportation and process management when placed in a base tray. 【Features】 ■ Can be used incorporated into a base tray or half tray ■ Ideal for transportation and process management *For more details, please refer to the PDF document or feel free to contact us.

• Rubber
• mat

The "Rubber Mat: Nitrile Rubber" is a pyramid-shaped rubber mat. It is designed to be slip-resistant and minimizes contact between stored items. It can be placed in any direction, both vertically and horizontally. Additionally, it is suitable for transportation and process management when stored in a base tray, and is available in two types of materials. Please choose according to your needs. 【Features】 ■ Can be used incorporated into base trays or half trays ■ Ideal for transportation and process management *For more details, please refer to the PDF document or feel free to contact us.

• Rubber
• mat

The "Combination Stand" is a process management part designed for transporting and cleaning tools and round parts in an upright position. We offer a lineup that combines bases, spacers, and bottom plates depending on the height to be held. 【Features】 ■ Short Type 2M: Can hold 7 pieces in the base tray and 2 pieces in the half tray. ■ Wide Type 7M: Can hold 2 pieces in the base tray and 1 piece in the half tray. ■ Hole-less Type 2MF/7MF: Can be freely processed to create an original stand. (*Please note that processing costs will be borne by the customer.) *For more details, please refer to the PDF document or feel free to contact us.

• Work tools
• Other work tools

The "Bridge" is an additional part for the base tray that allows tools and long parts to be stored horizontally. Short Bridge - Resin Type By setting T-shaped stoppers at both ends, products can be secured. The bottom groove adopts a V-shaped structure to stabilize products in the center, offering high versatility. Short Bridge - Rubber Type Available in various sizes, with T-shaped and V-shaped options that provide stability in the center, ensuring excellent safety. It is difficult to scratch products and has a strong anti-slip effect. It is highly resistant to oil and does not easily deteriorate. 【Features】 Short Bridge - Compatible with diameters φ6 to φ32, can accommodate lengths up to 200mm - Available in two types: resin and rubber - Length can be adjusted to fit the grooves of the base tray and center bar or half tray *The Short Bridge must be used in conjunction with the center bar when used with the base tray. Long Bridge - Available in four sizes: φ6, φ12, φ16, and φ25, can accommodate lengths up to 300mm - Made from oil-resistant rubber. It does not slip and is difficult to scratch products. - Position can be freely adjusted to fit the grooves on the side of the base tray. *For more details, please refer to the PDF document or feel free to contact us.

• Work tools
• Other work tools

The "Half Tray" is resistant to heat and chemicals. It is available in four types with depths ranging from 10mm to 40mm in 10mm increments. You can directly incorporate parts from the base tray. The protrusions on the bottom allow for stacking without lateral movement. It can also be stacked with the base tray. 【Features】 ■ A multipurpose tray that is half the size of the base tray ■ Can directly incorporate parts from the base tray ■ Stacking is possible due to the protrusions on the bottom, preventing lateral movement *For more details, please refer to the PDF document or feel free to contact us.

• Work tools
• Other work tools

The "Base Tray" consists of a total of six types: five types with different depths, all sharing the same outer and inner diameters, and one type of spacer for height adjustment. By using the base spacer, it is possible to adjust the height of the outer circumference, and it can be bolted down at eight reinforcement points on the outer circumference. The protrusions on the bottom allow for stacking without lateral movement. It is also resistant to heat and chemicals. 【Features】 ■ Various parts can be incorporated ■ Height adjustment of the outer circumference is possible using the base spacer ■ Bolting is possible at eight reinforcement points on the outer circumference ■ Stacking is possible due to the protrusions on the bottom, preventing lateral movement *For more details, please refer to the PDF document or feel free to contact us.

• Work tools
• Other work tools

The "Square Tray" is easy to manage with neat numbers of 100, 50, 30, 20, 15, and 10. It has a stackable shape and comes with handles. By using a base spacer on the outer frame, it is also possible to store taller products. 【Features】 ■ Consistent use from process management to cleaning, drying, transportation management, and organization ■ Six variations to choose from according to the size of the product ■ Stackable due to the protrusions on the bottom surface, preventing lateral shifting *For more details, please refer to the PDF document or feel free to contact us.

• Work tools
• Other work tools

The "SMB Small Box" is a container-style small box. The lid is a snap-on type. The main body and lid are sold separately. Depending on the use, it is possible to store small items using just the main body or by adding a lid. 【Features】 ■ Can be stacked with just the main body or with the lid ■ Depending on the use, it is possible to store small items using just the main body or by adding a lid *For more details, please refer to the PDF document or feel free to contact us.

• Work tools
• Other work tools

The "Cushion Material Embedded Case: Standard Product" is a product with embedded cushioning material for the TMK-6540. We offer a lineup of three types, including "TMK-6540-M1B," "TMK-6540-H1B," and "TMK-6540-K1B." By using cushioning material for packaging, it can be stored more attractively and safely. 【Features】 ■ Can be stored more attractively and safely *For more details, please refer to the PDF document or feel free to contact us.

• Work tools
• Other work tools

The "FTB Parts Case" is a snap-fit parts case. It is rectangular with two types of depths, each available in three sizes. The same item name can be stacked. 【Features】 ■ Rectangular with two types of depths, each available in three sizes ■ Dedicated additional parts holder (FTB holder) is also available ■ A snap-fit case that can separate the body (white) and the lid (transparent) *For more details, please refer to the PDF document or feel free to contact us.

• Work tools
• Other work tools

The "SMK Parts Case" is designed with ease of access to stored items in mind. The front of the storage area is lower, while the back is higher. Additionally, the same item can be stacked. 【Features】 ■ Available in five sizes of vertical-opening cases ■ The sides have a double structure, making them very sturdy ■ The hinge part features a unique design by Makino Industries, with no protrusions and a simple design *For more details, please refer to the PDF document or feel free to contact us.

• Work tools
• Other work tools

The "CMK Parts Case" is designed with ease of access to stored items in mind. The front of the storage area is lower, while the back is higher. Additionally, the same item can be stacked. 【Features】 ■ Available in two sizes of rectangular slim-type cases ■ The sides have a double structure, making them very sturdy ■ The hinge part features a unique design by Makino Industries, with no protrusions and a simple design *For more details, please refer to the PDF document or feel free to contact us.

• Work tools
• Other work tools

The "PK Punch Case" is available in two sizes: φ4 to φ26, with lengths of 80mm and 125mm. The bottom surface has a rounded shape, providing stability in the center, and the same item can be stacked. The unevenness on the top and bottom of the case allows for stacking without lateral shifting. It is suitable for storage and management purposes. It is ideal for storing and managing cases that hold 10 or 5 round items, such as punch cases. 【Features】 ■ Available in two sizes: φ4 to φ26, with lengths of 80mm and 125mm ■ Stacking is possible without lateral shifting due to the unevenness on the top and bottom of the case *For more details, please refer to the PDF document or feel free to contact us.

• Other work tools
• Work tools

The dedicated case for diamond bites has finally been produced. We offer a lineup of six different sizes. We also have standard cushioning materials specifically for diamond bites available. Depending on the items to be stored, it is possible to order custom-shaped cushioning materials. The DMC-160W is the deepest case among all products from Makino Industries. 【Features】 ■ Standard cushioning materials specifically for diamond bites are available ■ Depending on the items to be stored, custom-shaped cushioning materials can be ordered *For more details, please refer to the PDF document or feel free to contact us.

• Other work tools
• Work tools

When it comes to chip cases, this is the product. The same item name can be stacked. 【Features】 ■ Four sizes of cases available ■ Six different shapes of compartments to choose from based on your needs ■ Sold as a set with the body (white) and lid (transparent) ■ Types 23 and 32 are available in the same compartment shape with different depths *For more details, please refer to the PDF document or feel free to contact us.

• Other work tools
• Work tools

We have lined up a dedicated case for metal saws and diamond cutters. Additionally, there is a round spacer for center fixation. By using the center spacer, the outer edge of the blade can be stored without coming into contact with the case. The same item can be stacked. 【Features】 ■ The use of the center spacer allows for storage without the outer edge of the blade contacting the case. * A base is always required when using the center spacer. ■ Dedicated cushioning materials for each size are also provided to prevent rattling. ■ Cases for φ30, φ80, and φ100 are also available in a deep type. * For more details, please refer to the PDF document or feel free to contact us.

• Other work tools
• Work tools

The hook-type opening and closing method allows for secure fastening. Cushioning materials are available as standard products. The HLK-125 can be selected from three different heights. It is possible to store items such as diamond wheels in combination with standard cushioning materials. 【Features】 ■ Cushioning materials are available as standard products ■ The HLK-125 can be selected from three different heights ■ The hook-type opening and closing method allows for secure fastening *For more details, please refer to the PDF document or feel free to contact us.

• Other work tools
• Work tools

The "AMK/EMK Parts Case" is a square case available in six sizes. It is ideal for carrying and organizing small parts. Additionally, the same item can be stacked. 【Features】 ■ Six sizes of square cases available ■ Double-structured sides for a very sturdy build ■ The hinge part features a unique design by Makino Industries, with no protrusions and a simple design *For more details, please refer to the PDF document or feel free to contact us.

• Work tools
• Other work tools

The "BMK Parts Case" is available in two sizes of slim-type cases. It is ideal for organizing around your desk and storing flat small items. Additionally, the same item can be stacked. 【Features】 ■ Two sizes of slim-type cases available ■ Double-layered side structure for very sturdy construction ■ The hinge part features a unique structure from Makino Industries, with no protrusions and a simple design *For more details, please refer to the PDF document or feel free to contact us.

• Work tools
• Other work tools

The "OMK Parts Case" is available in four sizes of rectangular cases. It is ideal for transporting and organizing small parts. Additionally, the same item can be stacked. 【Features】 ■ Four sizes of rectangular cases available * Among them, OMK-30 is sized to hold writing instruments and can also be used as a pencil case. ■ The hinge part features a unique structure from Makino Industries, with no protrusions and a simple design. * For more details, please refer to the PDF document or feel free to contact us.

• Work tools
• Other work tools

The "GMK Parts Case" is available in four sizes of rectangular cases. It is ideal for carrying and organizing small parts. Additionally, the same product can be stacked. 【Features】 ■ Four sizes of rectangular cases available ■ Double-structured sides for a very sturdy build ■ The hinge part features a unique design by Makino Industries, with no protrusions and a simple design *For more details, please refer to the PDF document or feel free to contact us.

• Work tools
• Other work tools

The "TAK Parts Case" is available in two sizes of rectangular cases. It is suitable for storing long items and for use as a transport box, and the same product name allows for stacking. Additionally, the sides have a double structure, making it very sturdy. 【Features】 ■ Two sizes of rectangular cases available ■ Double-structured sides for a very robust finish ■ The hinge section features a unique design by Makino Industry, with no protrusions and a simple design *For more details, please refer to the PDF document or feel free to contact us.

• Other work tools
• Work tools

The "TPK Tap Case" can store products ranging from φ3mm to φ16mm, with a maximum length of 104mm. It features dividers that allow for storage without contact between products. Additionally, the case is designed for durability, making it suitable for use as a transport box. Furthermore, the same item can be stacked. We offer storage options for each size: 10 pieces, 5 pieces, and 3 pieces. By using PP material, the stored items can be clearly seen. 【Features】 ■ Can store products ranging from φ3mm to φ16mm, with a maximum length of 104mm ■ Storage options available for each size: 10 pieces, 5 pieces, and 3 pieces ■ Features dividers that allow for storage without contact between products *For more details, please refer to the PDF document or feel free to contact us.

• Other consumables
• Other work tools

The "MRV Long Pack Case" is suitable for storing sets of long drills. By using optional dedicated cushioning materials, it is also possible to protect the cutting edges, and the same item can be stacked. It is suitable as a storage case for sets of long drills. The bottom groove features a V-shaped structure that stabilizes round tools in the center and reduces contact with the sides. 【Features】 - Adopts a bottom groove V-shaped structure that stabilizes round tools in the center and reduces contact with the sides. - Protects cutting edges by using optional dedicated cushioning materials. - The same item can be stacked. *For more details, please refer to the PDF document or feel free to contact us.

• Other consumables
• Other work tools

The "ADK Luma Type Drill Case" can be stored thinly and compactly, taking up minimal storage space. It is a case that holds 10 Luma type drills (with shank fixation), compatible with diameters of φ1.0 to φ3.0mm, and available in two lengths of 37mm and 50mm. Additionally, the same item can be stacked. By using PP material, the stored items can be clearly seen. 【Features】 ■ Thin and compact storage ■ Case for 10 Luma type drills (with shank fixation) ■ Compatible diameters φ1.0 to φ3.0mm, compatible lengths 37 to 50mm *For more details, please refer to the PDF document or feel free to contact us.

• Other consumables
• Other work tools

The "ACP Small Diameter End Mill Tip Protection Cap" can be used as a cap for protecting the cutting edges of small diameter tools. It is compatible with small diameter tools of φ3, φ4, and φ6. There are three shapes available: normal, wide, and long types, and by using it in conjunction with the BSK, DRK, and AP series, it is possible to protect the cutting edges more safely. 【Features】 ■ Can be used as a cap for protecting the cutting edges of small diameter tools ■ The cap has good transparency, allowing for easy visibility of the tool even when stored ■ Compatible with small diameter tools of φ3, φ4, and φ6mm *For more details, please refer to the PDF document or feel free to contact us.

• Other consumables
• Other work tools

The "AMS Sleeve Protection Cap" utilizes the elasticity of the product's oval shape to provide blade tip protection. Compatible diameters: φ5.4 to 60.0, effective length: 40 to 190 mm. It can be used for simple protection of re-sharpened items or as a cap for tool storage. 【Features】 ■ Can be used for simple protection of re-sharpened items or as a cap for tool storage ■ Material: Polypropylene (PP) ■ Standard color: Natural (transparent) *For more details, please refer to the PDF document or feel free to contact us.

• Other consumables
• Other work tools

The "ABK Small Diameter Drill Case" is a compact case for packaging small diameter tools. It is compact yet strong and durable. We offer it in a natural (transparent) color. 【Features】 ■ Suitable for small diameter tools and parts ■ Compact ■ Strong and durable ■ Material: Polypropylene (PP) ■ Standard color: Natural (transparent) *For more details, please refer to the PDF document or feel free to contact us.

• Other consumables
• Other work tools

The "BIK Center Tool Case" is a single-slot case that employs a hook lock mechanism. It features a hook lock system (remove by pressing both sides of the cap) and is suitable for storing tools with larger blade diameters. Compatible diameters: φ3 to φ12, compatible lengths: 52 to 92 mm. 【Features】 ■ Hook lock mechanism (remove by pressing both sides of the cap) ■ Designed for storing tools with larger blade diameters ■ Made of PP material, allowing for clear visibility of stored items *For more details, please refer to the PDF document or feel free to contact us.

• Other consumables
• Other work tools

The "DRK Drill Reamer Case" is suitable for storing drill reamers ranging from φ5.3 to φ32.0. Thanks to its unique adjustment mechanism, the length can be freely adjusted. Additionally, by using the extension part "Block," it can accommodate lengths of up to 402mm (made to order). We offer a wide lineup with compatible lengths ranging from 52mm to 275mm. 【Features】 ■ Ideal for storing drill reamers from φ5.3 to φ32.0 ■ Length can be freely adjusted with the unique adjustment mechanism ■ By using the extension part "Block," it can accommodate lengths of up to 402mm (made to order) *For more details, please refer to the PDF document or feel free to contact us.

• Other consumables
• Other work tools

The "AP Series" is a standard case with a fixed shank that accommodates various end mills. Please order the set that includes the "cap" for securing the tool and the protective cover "pipe." - Please select a "cap" that fits the shank diameter. - Please select a "pipe" that corresponds to the cap. *If necessary, please consider purchasing various additional parts. Additional parts: Extension part "block" Additional parts: "Holder" to compensate for the connection wobble of the block Additional parts: "Different diameter shank holder" for adjusting the shank diameter compatibility Depending on the total length of the stored items, you can choose from three sizes of pipes: APS (S), APM (M), and APL (L). Compatible diameters: φ1.0 to φ25, maximum total length of 300mm. [Features] - By using PP material, the stored items can be clearly seen. - Material: PP (polypropylene) - Cap colors: Red, Blue, Green *For more details, please refer to the PDF document or feel free to contact us.

• Other consumables
• Other work tools

The "BSK End Mill/Drill Case" accommodates diameters from φ7 to φ56 and has a total length of 370mm. Utilizing a rack system, it allows for length adjustments between pitches. Additionally, thanks to a unique adjustment mechanism, the length can be freely adjusted. The use of transparent PP material enables clear visibility of the stored items. Furthermore, it has been finished with durability and high precision through injection molding. *For more details, please refer to the PDF document or feel free to contact us.*

• Other consumables
• Other work tools

The "TMK Parts Case" is a product that adds a rubber tray to a multi-tray. It can be used as a standalone item or as a work mat. The hinge section features an original structure from Makino Industries, with no protrusions, resulting in a simple design. It is suitable for carrying and organizing small parts, and the same item can be stacked. Additionally, a 180mm compatible case has been added as the fifth option in this series. 【Features】 ■ Available in five sizes of rectangular cases ■ Double-structured sides for very sturdy construction ■ Hinge section features an original structure from Makino Industries ■ Simple design with no protrusions *For more details, please refer to the PDF document or feel free to contact us.

• tray
• Other consumables

This catalog is the product catalog of Makino Industry Co., Ltd., a manufacturer of tool cases that focuses on the specialized field of industrial cutting tools. It features a wide range of industrial cutting tool cases, including the standard case for end mills and drills, "BSK End Mill/Drill Case," as well as cases for general use, additional parts holders, and dental-related cases. Additionally, all of our products are produced using the "injection molding" method, ensuring high dimensional accuracy, productivity, and stable quality without variation. [Contents] ■ Industrial cutting tool cases ■ General-purpose multi cases ■ Additional parts holders ■ Dental-related cases ■ Multi trays *For more details, please download the PDF or feel free to contact us.

• tray
• Other packaging materials
• Other consumables