ナガオカ製作所 List of Products and Services

The "NMC-250E" is a conveyor-type CO2 laser marking device. It performs printing on the surface of substrates. The printing area can be 300mm x 300mm. Equipped with a wide-area CO2 laser marker, the printing conditions are set via a PC or console. 【Features】 ■ Performs printing on the surface of substrates ■ Equipped with a wide-area CO2 laser marker ■ Printing area can be 300mm x 300mm ■ Printing conditions are set via PC or console *For more details, please refer to the PDF document or feel free to contact us.

• Laser marker
• Other markings

The "NSC-250Sxy" is an XY laser marking device that accurately prints in multiple locations on the surface of a substrate. By adding a position correction function, it is possible to further enhance printing accuracy. The machine length is 800mm, making it 250mm more compact than the previous model. Additionally, the operation panel has been enlarged, and the mounting method has been improved for better visibility and enhanced operability. 【Features】 ■ The machine length is 800mm, making it 250mm more compact than the previous model. ■ The tact time is shortened as reading is performed without moving the XY table after printing. ■ Confirmation of the printed code is done using a reader. ■ The operation panel has been enlarged, and the mounting method has been improved for better visibility and enhanced operability. ■ By adding a position correction function, printing accuracy can be further improved. ■ Options are available to enhance usability. *For more details, please refer to the PDF document or feel free to contact us.

• Laser marker
• Other markings

The "NCX-250" is a fully equipped circuit board cleaning device featuring upper and lower brushes and rollers. After cleaning with brushes, extremely fine dust is removed by the rollers. The height of the brushes and rollers can be set via numerical input on a touch panel, allowing for pass operation of the mounted circuit boards on both the upper and lower sides. Additionally, an ionizer is standardly equipped on both the upper and lower sides of the circuit board discharge side. 【Features】 ■ Fully equipped circuit board cleaning device with upper and lower brushes and rollers ■ Extremely fine dust is removed by rollers after cleaning with brushes ■ Height of brushes and rollers can be set via numerical input on a touch panel ■ Pass operation of mounted circuit boards is possible on both the upper and lower sides ■ An ionizer is standardly equipped on both the upper and lower sides of the circuit board discharge side *For more details, please refer to the PDF document or feel free to contact us.

• Other cleaning machines

The NCWS-250 is a device that cleans debris and dust attached to both sides of the circuit board and the transport end face using brushes. The brush units for the top and bottom automatically raise and lower according to the operating mode, and debris inside the through holes is removed by air blowing from above. It is equipped with a mechanism that detects filter clogging in the dust collector as standard, and the cleaning of the brush unit and brush replacement can be easily performed due to its removable structure. 【Features】 - Simultaneous cleaning of debris attached to the top and bottom surfaces and the transport end face of the circuit board using brushes. - The brush units for the top and bottom automatically raise and lower according to the operating mode. - Debris inside the through holes is removed by air blowing from above. - The cleaning of the brush unit and brush replacement can be easily performed due to its removable structure. - An ionizer is standardly equipped on the top and bottom surfaces of the circuit board discharge side. *For more details, please refer to the PDF document or feel free to contact us.

• Other cleaning machines

The NC-250 is a device that cleans debris and dust adhered to the surface of the circuit board using a brush. Cleaning is performed using a combination of a brush and air blow, and debris inside the through holes is removed by air blowing from the top. The cleaning of the brush unit and the replacement of the brush are designed to be easily detachable. Additionally, since the brush comes into contact with the circuit board, height adjustment of the brush was previously necessary due to the thickness of the board, but now it is no longer required thanks to the board thickness tracking feature. 【Features】 ■ Cleans debris adhered to the surface of the circuit board using a brush and air blow ■ The brush unit automatically raises and lowers according to the operating mode ■ Removes debris inside the through holes by air blowing from the top ■ The cleaning of the brush unit and the replacement of the brush are designed for easy detachment ■ An ionizer is standardly equipped on the top surface of the circuit board discharge side *For more details, please refer to the PDF document or feel free to contact us.

• Other cleaning machines

The "NTC-250E-2D" is a device that automatically reads ID codes located at any position on the surface or back of a circuit board. By registering position information in advance, it can automatically read the ID codes on both sides of the circuit board. When combined with an optional conveyor automatic width adjustment mechanism, setup can be completed simply by reading the registered file. Additionally, it comes standard with a full cover body designed with safety in mind. 【Features】 ■ Capable of reading ID codes on both the surface and back of the circuit board ■ Automatically reads by registering position information in advance ■ Standard full cover body designed with safety in mind ■ Can accommodate specified cameras ■ When combined with the optional conveyor automatic width adjustment mechanism, setup can be completed simply by reading the registered file *For more details, please refer to the PDF document or feel free to contact us.

• Other Code Readers
• Fixed-mount barcode reader
• others

The "NCW-250" is a device that cleans debris and dust attached to the circuit board using brushes on both sides. The brush units for the top and bottom automatically raise and lower according to the operating mode, and debris inside the through holes is removed by air blowing from above. It is equipped with mechanisms to detect contact between the circuit board and the brushes, as well as to detect filter clogging in the dust collector. The structure allows for easy removal for cleaning and brush replacement of the brush units. 【Features】 ■ Simultaneously cleans debris attached to the top and bottom of the circuit board with brushes. ■ The brush units for the top and bottom automatically raise and lower according to the operating mode. ■ Debris inside the through holes is removed by air blowing from above. ■ The structure allows for easy removal for cleaning and brush replacement of the brush units. ■ An ionizer is standardly equipped on both the top and bottom sides of the circuit board discharge side. *For more details, please refer to the PDF document or feel free to contact us.

• Other cleaning machines

The "NCWS-250II" is a device that cleans dust adhering to the surface, back, and edges of a circuit board using a brush. It detects brush wear and automatically adjusts the brush pressure to maintain consistent cleaning conditions. The brush height adjustment is automatically made based on a set value corresponding to the thickness of the circuit board. It is also possible to automatically switch models based on information from higher-level systems. 【Features】 ■ Detects brush wear and automatically adjusts the brush pressure to maintain consistent cleaning conditions. ■ The brush height adjustment is automatically made based on a set value corresponding to the thickness of the circuit board. ■ Registers models according to the operating mode (registering parameters such as double-sided, top side, edge presence/absence, board thickness, and pressure). ■ Starts operation based on model selection. ■ It is also possible to automatically switch models based on information from higher-level systems. *For more details, please refer to the PDF document or feel free to contact us.

• Other cleaning machines

The NCXS-250 is a device that cleans dust attached to the circuit board using a brush and adhesive roller. Fine dust is removed with the adhesive roller. By reading the model, conditions such as operating mode, conveyor width, and brush height are switched. The operating mode can also be set arbitrarily. 【Features】 ■ Cleans the edges and both sides of the circuit board ■ Cleans the edges plus the front/rear surfaces with a brush ■ Removes fine dust with the adhesive roller ■ Conditions such as operating mode, conveyor width, and brush height are switched by reading the model ■ The operating mode can be set arbitrarily *For more details, please refer to the PDF document or feel free to contact us.

• Other surface treatment equipment
• others

The "NTLS-250E" is a laser marking device that allows printing on both the front and back surfaces of a substrate by reversing the mechanism that transports the substrate. By registering the variety, the operating mode, laser printing files, and conveyor width can be changed all at once. Additionally, by equipping a wide-area CO2 laser marker, the main body length becomes compact at 500mm. 【Features】 ■ Printing on both the front and back surfaces of the substrate ■ Simultaneous setup change for operating mode, laser printing files, and conveyor width ■ Ability to read the kanban with a handheld reader and extract registered programs for model switching (optional) *For more details, please download the PDF or feel free to contact us.

• Laser marker