ゼニス計測システム List of Products and Services

- Digital I/O 32-bit (input and output selection possible in byte units) - A compact and low-cost USB adapter that can be easily controlled from a computer - The DIO interface uses the 74AC245, which has ample output drive - Compliant with USB 2.0 standard, full speed - Power (+5V) is supplied via USB - Compact and low-cost ● You can choose between the board type ZS-6222AP and the compact case type ZS-6222AS. ● It is functionally compatible with the ZS-6222 series successors. For more information on our other USB-related products and comparisons, please visit the official website through the related links.

• Instrumentation and Control Systems

● This is a compact and easy-to-handle LAN adapter that allows 32-bit digital I/O signals to communicate with a LAN interface. ● It supports the Ethernet TCP/IP protocol, enabling control of parallel signals using existing LAN networks. ● With the virtual COM port utility, it can be programmed as if it were RS-232C without being aware of Ethernet. ● The power supply is +5V, under 100mA (an AC adapter is sold separately). ● It is a compact, low-cost product that is user-friendly. ● You can choose between the board type ZS-6822AP and the compact case type ZS-6822AS. ● It is functionally compatible as a successor to the ZS-6822 series. For more information on our other LAN-related products and comparisons, please visit our official website through the related links.

• Instrumentation and Control Systems

■ZS-6143AF: RS-232C Control GP-IB Controller - A computer or PLC with an RS-232C interface (including USB-to-serial conversion) can easily be used as a GP-IB controller. - It has built-in bidirectional buffer memory of 16K bytes each (totaling 32K bytes), which improves system usage efficiency. - There are 23 simple and easy-to-use commands available. - It supports the GP-IB SRQ signal. 【Application Example】 - Build a measurement system that controls GP-IB from a computer or PLC. (You can control GP-IB devices from RS-232C and use it for device control and data input from devices.) For other lineups and comparisons of our GP-IB related products, please visit our official website through the related links. #GPIB #GP-IB #RS232C #RS-232C #Serial

• Instrumentation and Control Systems

■ZS-6144AF: GP-IB/RS-232C Converter ● Easily integrate devices with an RS-232C interface into a GP-IB system. ● Equipped with a built-in bidirectional buffer memory of 16K bytes each (totaling 32K bytes), improving system usage efficiency. ● Generates SRQ due to communication errors in RS-232C. ● For inquiries about custom products, such as wanting to generate SRQ at arbitrary timings, please contact us via email or phone. 【Application Example】 ● You can incorporate RS-232C devices into an already established GP-IB system for data acquisition and various controls. For other lineups and comparisons of our GP-IB related products, please visit our official website through the related links.

• Instrumentation and Control Systems

- Operates as a GP-IB controller based on commands from a host computer with a LAN interface. - Functional expansions such as the length limitation of GP-IB cables and the ability to have multiple host computers as GP-IB controllers are also realized. - Supports Ethernet TCP/IP protocol. - With the virtual COM port utility, control is possible with programs equivalent to RS-232C without being aware of Ethernet. - Controls GP-IB devices using existing 10/100BASE-T networks. - Enables data transmission and reception with multiple host computers. - Independent send and receive buffer memory: 16KB each. - If the host computer supports Ethernet, it can be used regardless of whether it is a workstation, personal computer, or PLC. For more information on our company's LAN/GP-IB related products, including other lineups and comparisons, please visit the official website from the related link.

• Instrumentation and Control Systems

- Digital signals such as BCD and binary can be input to a computer via RS-232C, allowing for easy ON/OFF control from the computer. - Digital I/O: 32 bits (input/output settings can be configured by byte). - The DIO interface uses a 74AC245 (or equivalent) which has ample output drive capability. - Since the operating mode is set via commands, it offers high versatility. - It is a compact, low-cost product that is user-friendly. For more information on our other RS-232C related products and comparisons, please visit our official website through the related links. #RS232C #RS-232C #Serial

• Instrumentation and Control Systems

The "ZS-6103EG" is an extender that expands and extends the GP-IB bus. By using optical fiber cables, it can achieve longer transmission distances than GP-IB cables, and it also allows for the addition of GP-IB devices. Additionally, the optical transmission line is isolated from the internal circuits, including GP-IB, which enhances resistance to external noise. 【Features】 ■ Compact (50×100×24mm) and high performance ■ Extended transmission distances (F1 is 3km, F5 is 1km) ■ Supports various systems through vertical connection ■ No GP-IB connection cable required for ZS-6103EG ■ Enhanced noise resistance for GP-IB systems *This product is typically used as a set by connecting two units with an optical cable. For more information on our other GP-IB related products and comparisons, please visit the official website through the related links. #GPIB #GP-IB

• Instrumentation and Control Systems
• Other FA equipment

● This is an easy-to-handle GP-IB adapter that allows parallel signals to communicate with the GP-IB bus. ● Converts digital signals up to 64 bits to GP-IB. ● The ZS-6120CP is a board type with a DC5V power supply. ● The ZS-6120CH is a compact case type with an AC100V power supply. ● It can capture parallel signals such as BCD and binary into a computer and perform start/stop and relay ON/OFF control outputs from the computer. ● You can choose between the board type ZS-6120CP and the compact case type ZS-6120CH. For other lineups and comparisons of our GP-IB related products, please visit the official website from the related link.

• Instrumentation and Control Systems

The ZS-6122C is a low-cost, easy-to-handle GP-IB adapter that allows parallel signals to communicate with the GP-IB bus. It can capture parallel signals such as BCD and binary into a computer and perform functions like start, stop, and relay ON/OFF from the computer. ■ Capable of communication with 4-byte input/output data ■ Input/output assignments can be selected using DIP switches ■ Control signals are provided to synchronize with connected devices For more information on our other GP-IB related products and comparisons, please visit our official website through the related links.

• Instrumentation and Control Systems

● A highly expandable GP-IB gate controller. The GP-IB connector complies with IEEE standards, and the I/O bus uses FC connectors. ● This GP-IB adapter features an 8-bit bidirectional data bus, 8-bit address signals, and other input/output signals such as read and write, making it easy to connect between GP-IB bus signals and digital I/O like BCD. ● The number of input/output data can be expanded up to a maximum of 1024 bits or 256 bytes. For more information on our other GP-IB related products and comparisons, please visit our official website through the related links.

• Instrumentation and Control Systems

- It is a compact and low-cost USB adapter with built-in MOS relay output and phototransistor input, which can be easily controlled from a computer. - It has 2 relay output contacts and 2-bit phototransistor input, with the cable sold separately. - Compliant with USB 2.0 standards, full speed. - Power (+5V) is supplied via USB. - It is compact and low-priced. For other products in our USB-related lineup and comparisons, please visit our official website through the related links.

• Instrumentation and Control Systems

● This is a compact and low-cost USB adapter with built-in MOS relay output and phototransistor input, which can be easily controlled from a computer. ● 8 contact photomos relay output. 8 contact phototransistor input. ● The USB connector is Micro USB Type-B. For other lineups and comparisons of our USB-related products, please visit our official website through the related links.

• Instrumentation and Control Systems

- Digital I/O 32-bit (input and output selection possible in byte units) - A compact and low-cost USB adapter that can be easily controlled from a computer - The DIO interface uses the 74AC245, which has ample output drive - Compliant with USB 2.0 standard, full speed - Power supply (+5V) is provided via USB - Compact and low-cost ● You can choose between the board type ZS-6222P and the compact case type ZS-6222S. For other lineups and comparisons of our USB-related products, please visit the official website from the related link.

• Instrumentation and Control Systems

- It is a compact and low-cost USB adapter with built-in relay output and phototransistor input, which can be easily controlled from a computer. - 4 relay output contacts - 4-bit phototransistor input - Compliant with USB 2.0 standard, full speed - Power supply (+5V) is provided via USB - Compact and low-cost ● You can choose between the board type ZS-6224P and the compact case type ZS-6224S. For more information on our other USB-related products and comparisons, please visit our official website through the related links.

• Instrumentation and Control Systems

- It is a compact and low-cost USB adapter with a built-in phototransistor that can be easily controlled from a computer. - 4-channel photomos relay output. - 4-bit phototransistor input. - Compliant with USB 2.0 standard, full speed. - Power supply (+5V) is provided via USB. - Compact and low-cost. ● You can choose between the board type ZS-6225P and the compact case type ZS-6225S. For more information on our other USB-related products and comparisons, please visit our official website through the related links.

• Instrumentation and Control Systems

The ZS-6228 is available in three types, each with two shapes, for a total of six types. ZS-6228P/S-8R: 8 transfer relay outputs ZS-6228P/S-8M: 8 photoMOS relay outputs ZS-6228P/S-8N: 8 photocoupler inputs - It is a compact and low-cost USB adapter with built-in transfer photoMOS relay outputs or photocoupler inputs, easily controllable from a computer. - Complies with USB 2.0 standards, full speed. - Power supply (+5V) is provided via USB. - Compact and low-cost. ● You can choose between the board type ZS-6228P and the compact case type ZS-6228S. For other lineups and comparisons of our USB-related products, please visit our official website through the related links.

• Instrumentation and Control Systems

- This is a LAN adapter that interfaces digital signals over LAN. - It allows digital signals such as BCD and binary to be captured by a computer via LAN, enabling easy ON/OFF control from the computer. - Compatible with Ethernet TCP/IP protocol. - Digital I/O: 32 bits (input/output settings can be configured in byte units). - The DIO interface uses a 74AC245 (or equivalent) with sufficient output drive. - The operating mode settings are done via commands, providing high versatility. - It is a compact, low-cost, and user-friendly product. For more information on our other LAN-related products and comparisons, please visit our official website through the related links.

• Instrumentation and Control Systems