ソーキ List of Products and Services

■Measurement range: Up to an average wind speed of 22 m/s

• Wind Speed/Volume Meter

【Measurement Range】 ■Temperature: -15 to +40℃ ■Humidity: 0 to 100% RH …etc. *For more details, please download the PDF from our website or feel free to contact us.

• Thermo-hygrometer

■Measurement range: 500N (50kgf) ■Minimum display: 0.1N ■Power supply: Built-in battery / AC100V

• Scale

Measurement range: -40℃ to +40℃

• Thermo-hygrometer

Measurement range: -40 to +40℃

• Thermo-hygrometer

Measurement range: -40 to +40℃

• Thermo-hygrometer

Measurement range: 2 to 60 m/s

• Wind Speed/Volume Meter

■Measurement range: -2.00 to 16.00 pH ■Resolution: 0.01 pH

• Soil testing

Measurement range: 0 to 8mm

• Coating thickness gauge

■Measurement range: 0 to 60 m/s ■Sampling interval: Instantaneous value at 1-second intervals / Average value at 1-second intervals ■Alarm output: Primary and secondary alarm outputs

• Wind Speed/Volume Meter

Measurement range: 0 to 60 m/s

• Wind Speed/Volume Meter

■Measurement range: 0 to 600μm

• Coating thickness gauge

Measurement range: 0 to 20mm

• Coating thickness gauge

■Measurement range: 0 to 2,000μm

• Coating thickness gauge

■Measurement range: 0 to 10m / 0 to 5m / 0 to 2m / 0 to 1m *Switchable

• Other environmental analysis equipment

■Measurement range: 0 to 10m, 0 to 5m, 0 to 2m, 0 to 1m *Switchable

• Other environmental analysis equipment

■Measurement range (compressive strength): 10 to 70 N/mm² ■Impact energy: 0.74 N

• Flaw detection testing

■Measurement range (compressive strength): 0.2 to 5 N/mm² ■Impact energy: 0.88 Nm

• Flaw detection testing

【Measurement Range】 ■Wood: 7–35% ■Mortar: 0–15%

• Flaw detection testing

■Measurement Range - Wind Speed: 2 to 60 m/s (Starting Wind Speed 2.0 m/s) - Wind Direction: 16 Directions

• Wind Speed/Volume Meter

【Measurement Range】 ■Wind Speed: 2–60 m/s ■Wind Direction: 1–360°

• Wind Speed/Volume Meter

Measurement range Wind speed: 0 to 20 m/s Temperature: -20 to +50°C

• Wind Speed/Volume Meter

■Measurement Range ・Electromagnetic: 0 to 2.50mm ・Eddy Current: 0 to 2.00mm

• Coating thickness gauge

■Measurement Range ・Electromagnetic: 0 to 2.50mm ・Eddy Current: 0 to 2.00mm

• Coating thickness gauge

■Measurement Range ・Mortar: 20–40% (volumetric water content) ・Ready-mixed concrete: 120–240 kg/m3 (unit water amount)

• Soil testing

■Measurement Range - Mortar: 20-40% (volumetric water content) - Ready-mixed concrete: 120-240 kg/m3 (unit water amount)

• Soil testing

■Measurement Range ・Mortar: 20–40% (volumetric water content) ・Ready-mixed concrete: 120–240 kg/m3 (unit water amount) ・Fine aggregate: 15% or less (surface water content)

• Soil testing

■Measurement Range ・Mortar: 20-40% (volumetric moisture content) ・Ready-mixed concrete: 120-240 kg/m3 (unit water amount) ・Fine aggregate: 15% or less (surface moisture content)

• Soil testing

【Measurement Range】 ■Concrete: 0 to 12% ■Mortar: 0 to 15% ■ALC: 0 to 100%

• Flaw detection testing

■Measurement Range ・Temperature: -40.0 to +85.0℃ ・Humidity: 0.0 to 100.0% RH

• Thermo-hygrometer

■Measurement Accuracy - Less than 40mm: within ±2mm - 40mm or more: within ±5%

• Flaw detection testing

The measuring device itself is fundamentally a hydraulic system, with a hole in the center of the main body for inserting a test bolt. By tightening the bolt, nut, and washer set in this hole with a TONE shear wrench, hydraulic pressure is generated inside the measuring device. This hydraulic pressure is then converted into a value representing the axial force (tension) of the bolt, which is displayed on the dial gauge, allowing for direct reading of the axial force. ■ Equipped with a protector that withstands harsh conditions It firmly protects the gauge section even under severe usage conditions. ■ Large, easy-to-read Newton display scale The pointer is synchronized with the tightening speed, making measurement tasks easier. ■ Bolt rotation stop Bolt rotation stops are applied to the plate and bushing. ■ Field-compatible clamp device Convenient for attachment to steel frames and similar structures. ■ Compact, lightweight, and high precision

• Other environmental analysis equipment

■Measurement Pressure: 2.0MPa ■Measurement Time: 15/30/60min (3-stage switching)

• Other environmental analysis equipment

■Measurement pressure: 0.5/1.0/1.4/2.0 MPa (Note: The measurement water pressure is not switchable) ■Measurement time: 4/12/24/72/168 h (5-stage switchable)

• Other environmental analysis equipment

■Measurement range (when using PV-62) Acceleration (m/s²): 0.3 / 13 / 10 / 30 / 100 / 300 / 1,000

• Vibration Testing

The measurement mode includes two types: instantaneous value and maximum value hold. With the hand-arm vibration measurement card, it is possible to measure vibrations related to the human body. It allows for the evaluation of exposure to hand-arm vibrations from machinery and tools. ■ Three-directional acceleration measurement is possible.

• Vibration Testing

The measurement mode has two types: instantaneous value and maximum value hold, and it is a vibration measurement system related to the habitability of passenger ships and commercial vessels using the ship vibration measurement card VX-54WS. ■Acceleration measurement is possible in three directions: X, Y, and Z.

• Vibration Testing

**Features** ■ Built-in real-time frequency analysis function 1/3 or 1/1 octave frequency analysis is possible with this single unit. (Main channel) ■ Dual measurement of main and sub-channels With two noise measurement circuits, you can simultaneously measure with one frequency weighting characteristic (e.g., "A characteristic") while recording a signal with another (e.g., "C characteristic"), allowing for arbitrary selection of frequency and time weighting characteristics. ■ Equipped with a comprehensive data memory function Data can be saved in manual or auto mode. One block of memory is reserved for manual storage and two blocks for auto storage. ■ Equipped with an infrared remote control port Remote operation is possible with an infrared remote control that has 18 functions. ■ Backup function The settings for level range and frequency weighting characteristics of the noise meter are retained even when the power is turned off, allowing you to set it back to the same settings as the last measurement simply by turning the power on. ■ Energy-saving design for continuous 8-hour measurement Achieved double the operating time of conventional models with alkaline battery specifications. ■ Large LCD display with backlight enables nighttime measurements.

• Noise Inspection

You can record the values measured by a sound level meter or vibration meter on roll paper. The paper feed speed can be increased to create a clearer record only while the measured noise level or vibration level exceeds the measurement level. 【Features】 ■ Control of each operation of the pen, paper feed, and marker is possible ■ Measurement of paper feed control is possible ■ Can be linked with level processing devices and others

• Vibration Testing

You can record data from sound level meters and vibration level meters onto a memory card. In particular, it is equipped with terminals for connecting microphones and pickups, as well as a sensor drive power supply (CCLD) for recording sound and vibration waveforms. 【Features】 ■ Up to 4 channels of electrical signals can be recorded. ■ The casing is compact and lightweight, and using four AA alkaline batteries allows for approximately 8 hours of continuous operation. (Conditions: 23°C, frequency range 20kHz, 4 channel input, no CCLD, backlight off) ■ It has terminals for easily connecting sensors, including microphones and accelerometer pickups, and is compatible with CCLD. ■ The frequency range covers DC to 20kHz, accommodating a wide variety of phenomena for recording. ■ Recorded data is written to compact flash in the commonly used WAVE format. ■ It allows for voice recording (voice memos) and marker recording, making later data organization convenient. ■ Recorded data can be played back. ■ It has no moving parts, allowing for use in various environments. Operation is silent. ■ User-friendly switches.

• Vibration Testing

The noise and vibration meter displays data simultaneously and records that data, allowing it to be expanded into daily reports and other data. Additionally, the adoption of a touch panel display has made it easier to use. Being all-weather type, it can be installed outdoors and is capable of automatically recording the calculated results every 10 minutes to a USB memory stick. 【Features】 ■ Easy settings with the touch panel display ■ Automatic recording of noise and vibration data to USB memory every 10 minutes ■ Built-in clock automatically calibrated by GPS signal ■ Automatic on/off display function (with timer for automatic off) ■ Lightweight aluminum body ■ All-weather type for outdoor installation ■ Instantaneous values of noise and vibration levels displayed on a large digital display every second

• Vibration Testing

It can measure noise levels and output data to a level recorder. It is also capable of calculations such as equivalent noise level and time-weighted noise level. 【Features】 ■ Wide range of 100dB With a wide dynamic range, there is no need to switch ranges during measurement, allowing for safe long-duration measurements. ■ 24-hour battery life Continuous measurement for long periods is easily achievable with dry batteries (when using alkaline batteries). ■ Built-in large-capacity memory For example, it can store instantaneous values every 100 milliseconds for up to 12 hours (432,000 data points). It can continuously store Leq and Lx every 10 minutes in the main memory for 50 days. ■ Built-in timer function The start and end times for automatic measurements can be set arbitrarily, enabling simultaneous measurements at multiple points.

• Noise Inspection

It is possible to display the instantaneous values of noise and vibration levels every second on a large digital display, as well as to automatically record the calculated results of noise and vibration meter data to a USB memory every 10 minutes. 【Features】 ■ Timer unattended measurement function ■ Automatic recording of calculated results of noise and vibration meter data to USB memory every 10 minutes ■ All-weather type, suitable for outdoor installation ■ Display of instantaneous values of noise and vibration levels every second on a large digital display ■ Warning light flashes when exceeding specified values ■ Automatic on/off function for the display

• Vibration Testing

It consists of a transmitting unit and a receiving unit. The transmitting unit is mounted on the boom of the truck-mounted crane, while the receiving unit is installed on the dashboard of the driver's seat. This setup allows the truck-mounted crane to operate with the boom raised, preventing accidents that could damage cables and other equipment. *The transmitting unit is equipped with an inclination sensor, and the receiving unit has a human detection sensor and alarm activation function. 【Features】 1. When the driver enters the driver's seat with the boom raised, the alarm lamp on the receiving unit lights up, alerting the driver with an alarm sound. 2. Communication between the transmitting unit and receiving unit is wireless, eliminating the need for wired connections. 3. The power supply for the receiving unit can be used in conjunction with a battery pack that comes with a cigarette lighter.

• Other security and surveillance systems

■Transmission output: 1mW

• Other security and surveillance systems