テクノ・プラス・ジャパン List of Products and Services

- Can be repeatedly attached and detached. (Can be easily removed with a Phillips screwdriver.) - High extraction force. - No wobbling when installed.

• Vehicle body parts

Nifco's buckles have received high praise for their strength.

• others

It has high durability. It can be set in high-speed areas. It has excellent heat resistance. There are vertical and horizontal types depending on the installation direction. There is a wide variety of torque options.

• Other machine elements
• Electrical equipment parts

- Push (lock) and push (unlock) the outside of the door, etc. - Since the shape of knobs, etc. is not necessary on the decorative surface of the door, the cabinet design can be set without compromising its aesthetics. - By combining with a damper, it can further enhance the sense of luxury.

• air conditioning
• Ventilation and Exhaust
• Air purifiers

It has excellent durability for opening and closing.

• Office furniture
• Storage

- Work can be done from one side, allowing for the installation of the code. - There are also certified products such as UL and CSA. - Installation work may require tools.

• Wiring materials
• power supply

- It consists of two parts: the main body and the pin section. - There are two types of installation: one that involves pushing in the pin section and one that involves screwing it in. - The installation work is one-directional.

• Other electronic parts

- The installation of the PCB is easy. - There is also a detachable type.

• Printed Circuit Board
• fastener
• Other electronic parts

The installation work requires only one action and has low man-hours.

• Vehicle body parts

- Resin-based liquid and gas connectors. - Used for connecting, branching, and gathering, etc.

• Fuel system parts
• Vehicle body parts

- The installation work involves only driving the pin of the male part into the body hole. - The clip part has sealing properties. - The extraction force of the clip part is high. - Light hammering is required to drive in the pin. - The mat requires female components.

• Interior parts

- The installation work requires less effort with a single action. - Compared to trim clips, the installation area is space-saving.

• Interior parts

- The installation work involves screwing into the body hole. - Height adjustment is possible. - Made from natural rubber or synthetic rubber. - The body hole requires a non-standard shape.

• Vehicle body parts

The installation to the counterpart hole requires only one operation, resulting in less man-hours.

• fastener
• Vehicle body parts
• Electrical equipment parts

- The installation work is a single operation and requires little man-hours. - Depending on the shape of the installation counterpart, there are some that have sealing properties.

• Vehicle body parts
• Other machine elements
• Interior parts

- The rod can be attached from one side. - The movement is smooth. - There is also a type that allows for adjustable rod length.

• Vehicle body parts

- Detachment from the trim board door is possible. - It uses a hidden clip type, so the clip head does not protrude from the surface of the trim board. - There are also water-tight types with sealing properties, as well as those for reverse punch holes.

• Interior parts
• Other Auto Parts

- Attach the flange part of the clip to the weather strip first. - The installation into the mounting hole is a single action of simply pushing in the clip part.

• Vehicle body parts
• Other Auto Parts

- The tightening force can be maintained for a long time in accordance with the aging deterioration of the hose. - The assembly workability in tight spaces is good.

• fastener
• Engine parts
• Other Auto Parts

- A strap with an integrated clip. - Attach to the mounting hole with the clip part, and secure cables, etc. with the strap part. - Binding and removing the strap part is easy. - The strap part can be reused multiple times.

• Harness
• Electrical equipment parts
• Wiring materials

- There are items that can be fastened and removed. - There are various sizes that can be clamped. - It can be fastened securely without any play.

• Harness
• fastener
• Electrical equipment parts

- The assembly work is easy. - Reuse can be repeated.

• Harness
• Electrical equipment parts
• Interior parts

- There are upward-facing 1-room and 2-room types. - Wire installation is easy and difficult to remove.

• Electrical equipment parts
• Vehicle body parts
• Wiring materials

There are various ways to secure cables.

• fastener
• Electrical equipment parts
• Other Auto Parts

There are standard types that allow for the attachment and detachment of the rod, and types that are fixed to the body after being pre-attached to the rod (not removable).

• Vehicle body parts
• Interior parts
• Other Auto Parts

There are hollow types and body-mounted types.

• Engine parts
• Fuel system parts
• Other Auto Parts

- By inserting it into the flange, it serves the role of a nut. - It has high holding power. - It can be reused by attaching and detaching the screw. - The flat part acts as a spacer.

• Vehicle body parts
• Other Auto Parts

- The nut can function with work done from one side. - The holding power after installation is very high. - There is no wobbling in the installed state. - The flange part can be utilized as a spacer. - It can be reused by removing the screw.

• Vehicle body parts
• Other Auto Parts

- Easy and quick continuous re-betting is possible. - The allowable thickness range for the mounting partner is wide (3 to 4 mm). - High extraction force. - No wobbling in the mounted state. - Special tools are required for the mounting work. - Reuse is not possible.

• others
• plastic
• Vehicle body parts

- Extremely easy to attach and detach. - No wobbling in the installed state. - Composed of 2 parts. - Installation requires 2 actions. - The pin does not come away from the grommet, preventing loss of the pin. - Ideal for securing panels that are repeatedly removed.

• Vehicle body parts
• Other consumables
• Other electronic parts

Both ends have a clip shape.

• Vehicle body parts
• Interior parts
• Other Auto Parts

- Insert into the counterpart hole and rotate 90° to install. - A large engagement area on the back of the panel allows for high strength to be set. - There are also types that allow for repeated attachment and detachment. - A large shape is necessary for the knob on the head to improve operability. - One-part type.

• Vehicle body parts
• Interior parts
• Other Auto Parts

- The removal force is high compared to the attachment force. - The attachment work requires fewer man-hours with a single action.

• Vehicle body parts
• Interior parts
• Other Auto Parts

- Can be set for small diameter holes. - Suitable for light load applications. - Installation work requires only one action, resulting in less labor.

• Interior parts
• Other Auto Parts

It is a resin rivet for fastening two plates. There is also a removable lineup available.

• Interior parts
• Vehicle body parts
• Other Auto Parts

This is a clip that secures the tire house and bumper of a vehicle. It can be used repeatedly. - High extraction force. - No wobbling when installed. - Suitable for high-load applications. - Reusable.

• Vehicle body parts

The "Brush Clip" is a resin rivet for attaching panels. It has a wide tolerance range for plate thickness and can be set for small diameter holes. The installation process is a product that requires only one action, resulting in fewer work steps. 【Features】 ■ For general fasteners and panels ■ Wide tolerance range for plate thickness ■ Can be set for small diameter holes (φ5 and above) ■ Installation requires only one action, resulting in fewer work steps *For more details, please refer to the PDF materials or feel free to contact us.

• Plastic bearings

"Push rivets" are plastic rivets used to attach panels. They have high pull-out strength and do not wobble when installed. Additionally, they can be installed by pushing in the pin, and can be removed by pushing in the pin again, making them easy to attach and detach. 【Features】 ■ For general fasteners and panels ■ Easy to attach and detach ■ High pull-out strength ■ No wobbling when installed *For more details, please refer to the PDF document or feel free to contact us.

• Plastic bearings

The "Push Turn Rivet" is a plastic rivet used for attaching panels. The operation involves a 90-degree turn of the pin, making attachment and detachment extremely easy. Additionally, it has high pull-out strength and does not wobble when installed. 【Features】 ■ Extremely easy to attach and detach ■ High pull-out strength ■ No wobbling when installed ■ Installation requires two actions *Please feel free to contact us for more details.

• Plastic utensils and containers