エアテックジャパン List of Products and Services

The "Roller Thunder Buffy (ATR-65BF)" is a product specifically designed for stainless steel and non-ferrous metal mirror finishing, which can reduce working time by 1/3 to 1/5 during use. Do you think that achieving a mirror finish on stainless steel is difficult and challenging? With this tool, professional mirror finishing can be done in-house. It is a mirror polishing tool that smoothly polishes large scratches and welds on stainless steel and non-ferrous metal surfaces. 【Features】 ■ Powerful scratch removal and fast polishing ■ Process shortening and astonishing shine ■ Smooth finish with minimal distortion using roller grinding stones ■ Easy operation without wobbling during linear processing *For more details, please refer to the PDF document or feel free to contact us.

• Other work tools

The "Neck Roll Pin" is a decorative cap for tile detachment prevention work, made of brass and plastic, ensuring it does not rust. We are committed to producing a product that can withstand outdoor use exposed to wind and rain, considering the materials, the compatibility of the plating with the materials, the adhesion of the paint to the plating, and the manufacturing process, among other factors. 【Features】 ■ Significantly improves work efficiency and aesthetics ■ Used by inserting into a fixed anchor with an injection port ■ The neck bends to align flush with the tile ■ Not affected by the insertion angle of the anchor ■ Coated with baked-on paint *For more details, please refer to the PDF document or feel free to contact us.

• Other work tools
• Other consumables

This product is a dry wall connecting waterproof joint for neck roll pins that can be used even when there is a space between the outer wall and the structure. It can be used for neck roll pins with hole diameters of 16.5φ and 18φ, and is compatible with 4-inch and W1/2 wall connecting anchors. Additionally, a seal tape to prevent loosening is attached at the time of shipment. 【Features】 ■ Can use neck roll pins for scaffolding even when there is a space between the outer wall and the structure ■ Protects the anchor from rust with waterproof putty and rubber ■ The putty bites into the screw threads while the rubber provides solid waterproofing around the anchor ■ Long joint of 150mm can be cut on-site to suit the situation ■ Compatible with 4-inch and W1/2 wall connecting anchors * For construction instructions and handling manuals, please contact us. * For more details, please refer to the PDF materials or feel free to contact us.

• Other work tools
• Other consumables

The "Wall-Connecting Neck Roll Pin System" is a decorative cap for scaffolding/wall-connecting anchors that allows for the creation of clean, straight holes of 16.5φ and 18φ in tiles using the vibration-free drill "Mizusumashi." During the next renovation, the wall anchors can be reused, and since the decorative cap allows the wall-connecting anchors to remain inside the wall, it contributes to cost reduction for the next renovation. 【Features】 - No need to chip the tiles during installation - Scaffolding can be applied to stone walls and stone-like tiles - Wall anchors can be reused during the next renovation - The decorative cap allows the wall-connecting anchors to remain inside the wall, reducing costs for the next renovation - Water-stopping bolts prevent water from entering the holes *For more details, please refer to the PDF materials or feel free to contact us.

• Other work tools
• Other consumables

The "Wall Connecting Neck Roll Pin Φ18 System" is a waterproof system with a decorative cap designed for wall connecting anchors used in scaffolding. Traditionally, these anchors were simply buried after installation, but this system allows for their reuse during renovations 10 to 15 years later. It prevents rainwater from entering from the outside with a waterproof bolt, without compromising aesthetic appeal. We also offer a decorative cap for tile detachment prevention work called "Neck Roll Pin Small Diameter." 【Features】 ■ No need to remove tiles during installation ■ Compatible with stone walls and stone-like tiles that previously could not accommodate scaffolding ■ Wall anchors can be reused during the next renovation ■ Maintains aesthetics by leaving the anchor inside the wall with a decorative cap ■ Prevents water from entering the hole with a waterproof bottle *For more details, please refer to the PDF document or feel free to contact us.

• Other work tools
• others

The "Water Circulation ATIII Type" is a vibration-free drill that allows for construction work to be carried out "while living" without causing discomfort to the residents inside hospitals, apartments, office buildings, etc. It combines lightweight portability for scaffolding with an impressive feature of circulating coolant water. It meets the demands of the times with a wide range of drilling diameters from small to anchor sizes. 【Features】 ■ Low noise and vibration-free with diamond bit rotary drilling ■ Bit cooling is hassle-free with circulating water ■ Lightweight and compact even on scaffolding ■ Easy post-cleaning without dirtying the exterior walls ■ Less likely to chip tiles as it does not use impact ■ All functions can be operated simply by turning the drill switch ON and OFF *For more details, please refer to the PDF materials or feel free to contact us.

• Other work tools
• Power tools
• drill

The "Blaze Bit 19φ" is a water-circulating, vibration-free drill that can be used for pinpoint stripping of painted exterior walls. Using a 19φ welded diamond bit, it strips elastic coatings smoothly without clogging. For asbestos-containing coating removal work, this product allows for wet operation and can forcibly collect debris with a filtration filter, making the job easier and resolving labor-related issues. 【Features】 ■ For pinpoint stripping of painted exterior walls ■ Water-circulating type ■ Strips elastic coatings without clogging ■ Forcibly collects debris with a filtration filter *For more details, please refer to the PDF materials or feel free to contact us.

• Other work tools
• Power tools
• drill

The "Roller Thunder" is a steel frame black skin stripping machine that can precisely grind both sides and corners with its reversing function. Improvements in motor torque balance enhance energy efficiency and the durability of drive components. Additionally, the irregularly shaped segmented grinding stone block prevents clogging by allowing chips and heat to escape. 【Features】 ■ Slim body (Φ56) ■ Excellent bite power with proven GC abrasive grains ■ Perforated rubber contact to reduce vibration *For more details, please download the PDF or feel free to contact us.

• Other work tools
• Power tools