LEDテクノ List of Products and Services

The power will be turned ON/OFF. 【Features】 ■ Input voltage 12V ■ Maximum input current 4A *For more details, please download the PDF or contact us.

• others

"Blink-kun" is an operation unit that allows you to adjust the LED blinking interval in five levels. 【Features】 ■ Two types of operation: strobe blinking and fade blinking ■ Input voltage is 12V ■ Maximum input current is 4A *For more details, please download the PDF or contact us.

• others

"Akira-kun" is an operation unit that allows you to adjust the brightness of the LED in five levels. You can adjust the brightness according to the usage environment. 【Measured Brightness Data】Measured by our company ■TEco Light 60 Brightness Levels: 5: 810, 4: 630, 3: 470, 2: 310, 1: 80, OFF: 0 ■TEco Light 30 Brightness Levels: 5: 570, 4: 460, 3: 350, 2: 230, 1: 60, OFF: 0 *For more details, please download the PDF or contact us.

• others

This is a magnet for securing excess cords to shelves when installing under-shelf lighting on steel fixtures. 【Features】 ■ The installation position of the magnet can be adjusted ■ Uses a strong neodymium magnet *For more details, please download the PDF or contact us.

• others

"Teco Sound" is a voice POP equipped with a PIR human detection sensor. The PIR (Passive Infra-Red) human detection sensor detects changes in infrared radiation from surrounding objects (such as a person passing by) through dozens of sensing axes and responds accordingly. There are two types: a fixed type that writes audio data to a circuit board for reliable playback, and a replaceable type that uses a microSD card for convenient audio previews and data swapping. 【Features】 ■ The exterior is made of paper, allowing for designs such as offset printing on the front. ■ The volume can be adjusted in three levels. *For more details, please download the PDF or contact us.

• others

The "Techno Light Panel," designed for light guide plates, uses LED and acrylic sheets, and is widely used in public signage and retail storefronts due to its convenience and cost-saving effects. Our company not only provides light guide plates as backlights but also utilizes advanced acrylic processing technology to incorporate functionality and design into the light guide plates themselves. We also showcase a wide range of production examples, including signs, displays, POPs, panels, exhibition stands, and shelves, all creatively arranged. 【Features】 ■ Thin panels (light guide plates) that glow using LED and acrylic sheets ■ Incorporates both functionality and design ■ Controls light using laser engraving and special printing techniques ■ Produces beautifully glowing display objects ■ Materials: Light guide plate - acrylic sheet, aluminum channel *For more details, please refer to the PDF document or feel free to contact us.

• LED lighting
• LED Module
• LED fluorescent lamp

The "Mini Square Electric Sign" is a mini-sized, box-type POP that is free in size due to extrusion molding. It is a glowing mini POP recommended for small spaces. By layering diffusion film or resin sheets in multiple insertion grooves, it allows for a graphic expression of light with depth. We also introduce examples of use where the main body is stacked or where a half-mirror sheet is used to create a sense of depth. 【Features】 ■ Recommended for small spaces ■ Mini-sized, box-type POP that is free in size due to extrusion molding ■ Capable of graphic expression of light with depth ■ Numerous production examples available *For more details, please refer to the PDF materials or feel free to contact us.

• LED lighting
• LED Module
• LED fluorescent lamp

The "LED POP Star" is a glowing shelf talker designed for standard display shelves. The three-dimensional face of the glowing POP sign brightly promotes products and sales areas. It is compatible with standard fixtures that have spill guards and those that do not. It uses LED modules "Teco Light 60" and "Teco Light 30" that can be inserted. Additionally, we offer an option called "POP Star Slider," which can be installed on the back to light up the face of the displayed products. 【Features】 ■ Glowing shelf talker ■ Three-dimensional face of the glowing POP sign ■ Brightly promotes products and sales areas ■ Uses LED modules "Teco Light 60" and "Teco Light 30" ■ Space for price cards, JAN codes, electronic price tags, etc. *For more details, please refer to the PDF materials or feel free to contact us.

• LED lighting
• LED Module
• LED fluorescent lamp

The "Teco Slim Line" is a W900 under-shelf lighting specifically designed for "Teco Light 30" and "Teco Light 60." The main body can be rotated to change the angle of illumination to match the displayed products. It is compatible with the diameter of fluorescent tubes (T6 Slim), allowing the use of lamp holders (pre-made for T6 Slim tubes) for installation. 【Features】 ■ High-brightness slim lighting ■ Exclusively for Teco Light 30 and Teco Light 60 ■ Adjustable illumination angle ■ Compatible with the diameter of fluorescent tubes (T6 Slim) *For more details, please refer to the PDF document or feel free to contact us.

• LED lighting
• LED Module
• LED fluorescent lamp

"Shina Terrace" is a lighting fixture that can fix the irradiation angle at 45 degrees, in addition to horizontal, and is designed so that the light source does not directly enter the eyes. The soft light that pursues glare-free illumination gently and accurately lights up products without reflecting the LED bulb. It is also suitable for installation in corners of fixtures and on steel L angles. 【Features】 ■ Soft light that pursues glare-free illumination ■ Gently and accurately lights up products without reflecting the LED bulb ■ Can fix the irradiation angle at 45 degrees in addition to horizontal ■ A lighting fixture where the light source does not directly enter the eyes ■ LED: Can accommodate LED boards up to 12mm in width inside *For more details, please refer to the PDF document or feel free to contact us.

• LED lighting
• LED Module
• LED fluorescent lamp

The "Tanaterras Flat" is a shelf lighting system that brightens and highlights the faces of products that are in shadow, using standard shelving fixtures, wooden fixtures, and acrylic fixtures. The main body cover comes in two types: frosted and clear. It can be mounted using magnets for steel fixtures, dedicated brackets for wooden fixtures, or it can be secured with double-sided tape. 【Features】 ■ High brightness ■ Simple design ■ Thin and lightweight at 8mm thick ■ Brightens and highlights the faces of products in shadow ■ LED: Can accommodate LED boards up to 12mm wide inside *For more details, please refer to the PDF document or feel free to contact us.

• LED lighting
• LED Module
• LED fluorescent lamp

"Tape LED" is a roll-type tape-shaped LED module. It can be installed along curves and other shapes. Additionally, it can be cut in units of 50mm. 【Features】 ■ Made to order ■ High brightness ■ Roll-type tape shape ■ Can be installed along curves and other shapes ■ Can be cut in units of 50mm *For more details, please refer to the PDF document or feel free to contact us.

• LED lighting
• LED Module
• LED fluorescent lamp

The "Teco Side" is an LED module that emits light in a lateral direction. It measures 500mm in length and 7mm in width, featuring 60 LED bulbs arranged on a circuit board with 3 bulbs per section, connected in 20 blocks. It can be cut in 25mm increments according to application needs. It is suitable for lighting effects with "Light Polycarbonate." Additionally, we offer tape-type LEDs that can be installed along curved surfaces. 【Features】 ■ Emits light in a lateral direction (LED beam angle of 120 degrees) ■ 20 blocks of circuit boards with 3 LED bulbs each ■ Can be cut in 25mm increments according to application needs ■ Ideal for lighting effects with "Light Polycarbonate" *For more details, please refer to the PDF document or feel free to contact us.

• LED lighting
• LED Module
• LED fluorescent lamp

The "Teco Display Light" has a length of 832mm and a width of 5.5mm, with a light source consisting of 60 LED modules. An LED board with 3 LEDs arranged in each has 20 blocks connected together. It emits light more gently than the "Teco Light for Light Guide Plates." 【Features】 ■ High brightness ■ For display use ■ LED board with 3 LEDs arranged in each block, connected in 20 blocks ■ Emits light more gently than the "Teco Light for Light Guide Plates" *For more details, please refer to the PDF document or feel free to contact us.

• LED lighting
• LED Module
• LED fluorescent lamp

The "Teco Light Guide Plate Light" is a light guide plate LED module with a length of 998.4mm, a width of 5.5mm, and 72 LED light sources. An LED substrate with 3 LEDs arranged is connected in 24 blocks. When used with a light guide plate, this product is installed in an aluminum single-sided channel, and a special 5mm thick acrylic plate is inserted to emit light from the surface. 【Features】 ■ High brightness ■ For light guide plates ■ LED substrate with 3 LEDs arranged connected in 24 blocks *For more details, please refer to the PDF document or feel free to contact us.

• LED lighting
• LED Module
• LED fluorescent lamp

The "Teco Light 30" is an LED module suitable for under-shelf lighting, measuring 832mm in length and 12mm in width, featuring 30 LED bulbs. The LED board, which has 3 LED bulbs arranged, is connected in 10 blocks. It can be cut at 83.2mm intervals depending on the application. There are four color temperatures available: daylight color (cool white), natural white (white), incandescent color, and blue. 【Features】 ■ High brightness ■ Ideal for under-shelf lighting and similar applications ■ LED board with 3 LED bulbs arranged in 10 blocks ■ Can be cut at 83.2mm intervals ■ Four color temperatures available *For more details, please refer to the PDF document or feel free to contact us.

• LED lighting
• LED Module
• LED fluorescent lamp

The "Teco Light 60" is an LED module suitable for under-shelf lighting and other applications, measuring 832mm in length and 12mm in width, featuring 60 LED bulbs. The LED board, which has 3 LED bulbs arranged, is connected in 20 blocks. It can be cut at 41.6mm intervals depending on the application. There are four color temperatures available: daylight color (cool white), natural white (white), incandescent color, and blue. 【Features】 ■ High brightness ■ Suitable for under-shelf lighting and more ■ LED board with 3 LED bulbs arranged in 20 blocks ■ Can be cut at 41.6mm intervals ■ Four color temperatures available *For more details, please refer to the PDF document or feel free to contact us.

• LED lighting
• LED Module
• LED fluorescent lamp

The "LED Side Emitting Sheet" is a newly conceived light-emitting sheet that applies a unique special processing to the surface of a thin sheet of polycarbonate resin, allowing it to efficiently trap the light emitted from LEDs shining from the edge (cut surface) and illuminate the entire sheet and its edges. Additionally, it excels in basic resin processing methods such as die-cutting, heat bending, and adhesion with acrylic materials, while the sheet's inherent elasticity enables curved and contoured finishes, creating a new texture. 【Features】 ■ Thin sheet with excellent processability ■ Rich variety of light colors and flashing patterns ■ Glare-free light *For more details, please request materials or view the PDF data available for download.

• others

This catalog is the product catalog of LED Tech Co., Ltd., a manufacturer of electrical processing equipment centered around LED for sales promotion fixtures. To accommodate various applications such as brightness, color temperature, and size, we have enhanced our lineup, starting with the "Teco Light Series." We also feature various products such as the "Tanaterras Flat," which focuses on design and usability, and the LED high brightness & wide shelf lighting "Shinaterras." [Contents] ■ Light you want to keep looking at ■ Original LED circuit board Teco Light Series ■ LED high brightness under-shelf lighting Tanaterras Flat ■ LED high brightness & wide shelf lighting Shinaterras ■ LED high brightness under-shelf lighting Teco Slim Line, etc. *For more details, please download the PDF or feel free to contact us.

• LED lighting
• LED Module
• LED fluorescent lamp