源邑光北野刃物製作所 List of Products and Services

At Genyu Kōhoku Knife Manufacturing Co., Ltd., we handle "rubber spatulas." They can be used to scoop out leftover paint from one-gallon cans and similar containers. We also offer "silicone rubber spatulas," which have a high heat resistance and are used by waterproofing contractors and in cooking. 【Product Lineup】 ■ Rubber Spatula ■ Silicone Rubber Spatula *For more details, please refer to the PDF document or feel free to contact us.

• Other work tools
• Work tools

At Genyu Kohokuno Knife Manufacturing Co., Ltd., we handle "Keren Ground Trowels." They are also used when removing wallpaper, and after applying the base coat putty, instead of finishing with sandpaper, the trowel is used to remove the excess putty. Additionally, we offer a "Tapered Handle Trowel," which improves work efficiency and reduces strain on the legs and back by attaching a tapered handle to a wider trowel. 【Features of Keren Ground Trowel】 ■ Can be used when removing wallpaper ■ No sandpaper finish after applying the base coat putty ■ Removes excess putty *For more details, please refer to the PDF document or feel free to contact us.

• Other work tools
• Work tools

At Genmu Kohokuno Knife Manufacturing Co., Ltd., we handle "putty boards." The "melamine putty board" has a melamine surface, making it highly resistant to wear. The edges are sharp, making it easy to scrape off putty, and it can be stored on the back side. In addition, we also offer a more affordable "plastic putty board" compared to the melamine putty board, as well as a "stainless steel putty board" that is easy to scrape putty off and also resistant to wear. 【Features of the Melamine Putty Board】 - Can store two putty knives for topcoat and primer. - The edges on all four sides are sharp, making it easy to scrape off putty with the edge. - Designed with a large radius to avoid hurting the body. - Highly resistant to wear (strong against friction with putty knives). *For more details, please refer to the PDF document or feel free to contact us.

• Other work tools
• Work tools

At Genyu Kohokuno Knife Manufacturing Co., Ltd., we handle "Floor Cutters." Until now, when cutting with a putty knife and cutter, gaps would inevitably form, and the cuts were not always clean, but now even women can cut effortlessly. We offer two types: "General Use," which has relatively lower durability compared to the "Semi-Pro" version aimed at semi-professionals. 【Features】 ■ Easily cuts cushion flooring ■ Effortlessly cut even by women ■ Available in two types: General Use and Semi-Pro *For more details, please refer to the PDF document or feel free to contact us.

• cutter
• Other cutting tools
• Other work tools

At Genyuu Kouhoku Knife Manufacturing Co., Ltd., we handle the "Y-type skinning knife." The "hammered skinning knife" is a product where the blade is embedded all the way to the end of the handle. The entire blade section is hardened, and it has a fine edge, making it very sharp and durable. In addition, we also offer "Y-type skinning knife 65" and "Y-type skinning knife 90." 【Features of the Hammered Skinning Knife】 ■ Available in widths of 65mm, 70mm, and 90mm ■ Blade is embedded all the way to the end of the handle ■ Very sharp and extremely durable ■ Hammer attached to the back of the handle *For more details, please refer to the PDF document or feel free to contact us.

• Other work tools
• Work tools

At Genyu Kohokuno Knife Manufacturing Co., Ltd., we handle the "Nade Brush." The "Uekomi Nade Brush" uses white pig bristles instead of the conventional black pig bristles, with the tips cut and only the thick root part used. Our bristles are uniquely planted at an angle on both ends, allowing for effective wallpaper pressing and air release even in corners. In addition, we also offer the "Thick Grip Uekomi Nade Brush" and the "Channel Nade Brush." 【Features of the Uekomi Nade Brush】 ■ Uses white pig bristles ■ Tips are cut, using only the thick root part ■ Bristles are bleached for hygiene ■ Can press wallpaper and release air in corners ■ Available with and without grip holes *For more details, please refer to the PDF materials or feel free to contact us.

• Brush
• Other work tools
• Work tools

At Genyu Kohokuno Knife Manufacturing Co., Ltd., we handle "Press Rollers." The "Roller (Special Urethane)" is a product designed to press wallpaper using special urethane. It features a roller part made of special resin, allowing for easy removal of coatings and adhesives. In addition, we also offer "Roller (Ultra High Molecular PE)" and "Roller (Urethane)" in our lineup. 【Roller (Special Urethane) Features】 ■ Made with special urethane ■ Easy to remove coatings and adhesives ■ Excellent design and lightweight ■ Available in large, medium, and small sizes *For more details, please refer to the PDF materials or feel free to contact us.

• Other work tools
• Work tools

At Genyu Kohokuno Knife Manufacturing Co., Ltd., we handle "Putty Knives." The "Flat Putty Knife I" features a thicker grip, making it easier to hold and apply putty with more force. The blade tip is thick, the position of the grinding area is balanced, and it has a non-curved structure. In addition, we also offer "Flat Putty Knife II" and "Flat Putty Knife III." 【Flat Putty Knife I Features】 ■ Thicker grip for easier handling and better force application when applying putty ■ Thick blade tip with a balanced grinding area and non-curved design ■ Available with a blade for undercoat putty and a blade for topcoat putty *For more details, please refer to the PDF document or feel free to contact us.

• Other work tools
• Work tools

At Genyu Kohokuno Knife Manufacturing Co., Ltd., we handle "ground spatulas." The "hole-punched lightweight ground spatula" features a stainless steel blade with holes, achieving approximately 40% weight reduction compared to conventional products, making it a flagship product. The blade is treated with a special coating to enhance wear resistance. In addition, we offer a variety of products such as "titanium ground spatulas" and "double-opening titanium ground spatulas." 【Features of the Hole-Punched Lightweight Ground Spatula】 ■ Practical registered product (Registration No. 3122234) ■ The stainless steel blade has holes punched in it ■ Approximately 40% weight reduction compared to conventional products ■ Special coating applied to the blade to enhance wear resistance ■ Surface hardness of conventional stainless steel blades is about 500 HV ■ Surface hardness of special coated blades is about 1,500 HV *For more details, please refer to the PDF document or feel free to contact us.

• Other work tools
• Work tools

This product features a revolutionary grip made from melamine plywood for the handles of putty knives and trowels. Melamine decorative plywood is a plastic sheet formed by layering multiple sheets of impregnated paper, which consists of melamine resin and phenolic resin soaked in printed paper and craft paper, and then dried. This is done under high temperature (150°C) and high pressure (approximately 100kg/cm²). Maintenance is easy, and there is no need to worry about water exposure or paint chipping. Please feel free to consult us if you have any requests. *For more details, please do not hesitate to contact us.

• Other work tools