進勇商事 List of Products and Services

The "N type" is a disposable hood made of SMS non-woven fabric that can be worn over the head, providing protection against light dust and similar particles. It can be secured to the head using the elastic band located inside the hood. Additionally, a fog-resistant film is used on the front, making it less prone to fogging. Please use it in various settings such as painting and construction sites. 【Features】 ■ Can be worn over the head ■ Provides protection against light dust and similar particles ■ Can be secured to the head with the elastic band inside the hood ■ Less prone to fogging *For more details, please refer to the PDF document or feel free to contact us.

• mask

This product is a sample panel dryer for drying paint test panels. A volume controller using a 1000W bulb has also been placed on the front panel, allowing for easy and arbitrary adjustment of temperature and warm air. Additionally, it can be used directly with solvent-based paints. 【Features】 ■ Compatible with water-based paints ■ Uses a 1000W halogen bulb ■ Increases the efficiency of color matching work ■ Allows drying time to be set up to 60 minutes with a timer ■ Wide window for easy access to and from the paint panels *For more details, please refer to the PDF document or feel free to contact us.

• Drying Equipment

This product is a hose that uses a conductive polyester resin with excellent conductivity in its inner layer. By achieving static electricity elimination performance, static electricity can be removed simply by attaching a metal fitting. There is no need for cumbersome grounding wire extraction work. Additionally, the static electricity that accumulates on the hose and the static electricity that accumulates on the operator can be discharged through the hose, preventing dust adhesion. 【Features】 ■ Enhanced static electricity elimination performance ■ Air flow is also static-free ■ Uses conductive polyester resin with excellent conductivity in the interior ■ Static electricity can be removed simply by attaching a metal fitting ■ Prevents dust adhesion *For more details, please refer to the PDF document or feel free to contact us.

• hose

The 『LFLS-1010』 is an LED fluorescent single-light stand that uses pure Japanese-made LEDs. There are no issues with insect-eaten lighting (mottled lighting) at all. It comes with a sealed dustproof frost cover, preventing mist and dust from entering, controlling unpleasant glare, and illuminating the entire cover. Additionally, the brightness of this single light is 5,200 lumens, equivalent to two 40w fluorescent bulbs, while consuming only 32.5w, which is more energy-efficient than one 40w fluorescent bulb. It has a lifespan of 40,000 hours (approximately 18 years) of use. 【Features】 ■ Uses pure Japanese-made LEDs ■ No insect-eaten lighting (mottled lighting) at all ■ Comes with a sealed dustproof frost cover that prevents mist and dust from entering ■ Adjustable fixed position up and down ■ 360° rotation possible *For more details, please refer to the PDF document or feel free to contact us.

• LED fluorescent lamp

This product is a microfiber cloth made from ultra-fine fibers that are different from regular textiles. The tiny gaps in the fibers create a capillary action, allowing it to absorb a large amount of water and dirt. Additionally, it excels in quick-drying properties, and the soft wiping feel provided by the fluffy ultra-fine fibers is another recommended feature of this product. 【Features】 ■ Made with ultra-fine fibers ■ Creates capillary action to absorb a large amount of water and dirt ■ Excellent quick-drying properties ■ Soft wiping feel from fluffy ultra-fine fibers *For more details, please refer to the PDF document or feel free to contact us.

• Other cleaning tools

The "NaviLiner III" is a convenient tool that allows you to easily mark the press lines in the wheelhouse area. It is easy to handle and can be used by less experienced body and spray technicians to reduce work time. It enables you to draw lines more easily and accurately. Please give it a try. 【Features】 ■ Use the guide's front and back to switch between single-point and two-point support ■ Simple structure for easy use ■ Increased durability with special hard resin ■ Easy to handle ■ Contributes to reducing work time *For more details, please refer to the PDF materials or feel free to contact us.

• others

The "New All-Masker" is a painting masking product that can easily accommodate 500mm roll paper. The tape holder is fixed to allow for easy attachment of paper, tape, and other items. It no longer moves during use. Additionally, it has been made easy to move, and a large net shelf has been added to the lower section, providing a storage space for spare roll paper and tape, making it very convenient. 【Features】 ■ Easily accommodates 500mm roll paper ■ Equipped with large wheels ■ The tape holder is fixed, preventing movement during use *For more details, please refer to the PDF document or feel free to contact us.

• others

Introducing the 'F-PACK', a cover for automotive repair painting. It allows for masking work and repair painting by opening necessary sections, achieving significant cost reductions through speed and labor savings. We offer various types, including the "L type" and "B type," as well as the "H type," which helps prevent complaints due to paint splatter. You can choose according to your needs. 【Lineup (partial)】 ■ Painting cover for ordinary passenger cars - L type ■ Painting cover for large passenger cars - B type ■ Protective cover for passenger cars - H type ■ Painting cover for large trucks - T type ■ Protective cover for large trucks - O type, etc. *For more details, please refer to the PDF document or feel free to contact us.

• others

This product is a new heat source heater that uses a special carbon crystal (carbon crystal) in the heating element material, significantly increasing the emission amount in the thermal absorption wavelength range and allowing for subtle temperature adjustments. It also has good heat exchange efficiency and can greatly reduce power consumption. Additionally, it reaches the maximum temperature in just 3 to 5 seconds, demonstrating rapid startup. 【Features】 ■ Significantly increased emission amount in the thermal absorption wavelength range ■ Allows for subtle temperature adjustments ■ Minimal resistance value changes during cooling, with no inrush current generated ■ Uses flexible materials for the heating element, allowing for any lighting direction ■ The heating element itself is lightweight, reducing the overall bank weight *For more details, please refer to the PDF document or feel free to contact us.

• Other heaters

The "FV-15/34/50 Nozzle" can be easily attached to a spray gun, making it easier to paint areas that are typically difficult to reach with a standard spray gun, such as around steps and spot welds. The nozzle tip features a flat spray with a diameter of 1.0mm and a pattern width of approximately 100mm. It is available in lengths of 150mm, 340mm, and 500mm, and the black pipe section can be bent for convenience. The 500mm version is suitable for painting hard-to-reach areas in large vehicles (such as buses and trucks) and special vehicles like tractors. 【Features】 - Simply attach to a spray gun - Makes it easier to paint areas that are difficult to reach with a standard spray gun - The nozzle tip has a diameter of 1.0mm with a flat spray and a pattern width of approximately 100mm - Available in lengths of 150mm, 340mm, and 500mm - The black pipe section can be bent for convenience *For more details, please refer to the PDF document or feel free to contact us.

• nozzle

The "Carbon Hand Heater CH-600" is a drying device designed compactly with carbon fiber heat effects (near-infrared + far-infrared effects) and finished in a hand-held type. The switch, integrated with the grip, features a user-friendly design that considers functionality and safety. Additionally, we offer an optional "Carbon Hand Heater Dedicated Warm Air Kit." 【Features】 ■ Compact design with carbon fiber heat effects ■ Excellent hand-held type ■ User-friendly switch designed with functionality and safety in mind ■ Dedicated warm air kit for the Carbon Hand Heater also available (optional) *For more details, please refer to the PDF materials or feel free to contact us.

• Drying Equipment

The "Carbon Black Heater III CBH-3064" is a new heat source heater that uses special carbon fiber as the heating element material. It is equipped with four small sirocco fans positioned in the best bank shape to efficiently provide warm air to the painted surface, making it compatible with water-based paints. Unlike metal heating elements, it has minimal resistance value fluctuations at low temperatures and does not generate any inrush current. 【Features】 ■ New carbon lamp ■ Stepless volume control ■ Compatible with all panel coatings ■ Equipped with a new warm air fan ■ Compatible with water-based paints *For more details, please refer to the PDF document or feel free to contact us.

• Drying Equipment

The "Wide Heater II WH-1000" is a model that utilizes the features of the traditional wide heater while pursuing ease of use and safety. It features a grip-integrated switch function, a safety guard compliant with the PSE law, and a user-friendly design with a dedicated mesh guard. Additionally, it can easily accommodate the dedicated warm air kit for the wide heater, and it is equipped with a grip shoe that can be easily attached to the dedicated stand. 【Features】 ■ Vertical and horizontal rotation with a sturdier oscillation function ■ Mesh guard ■ Grip-integrated switch ■ Focus on ease of use and safety ■ Compatible with the dedicated warm air kit for the wide heater *For more details, please refer to the PDF document or feel free to contact us.

• Drying Equipment

We offer a variety of products suitable for different repair processes to achieve the high-quality automotive repairs that our customers seek. The wipes from the "Sontara Surface Treatment System" are strong, produce minimal lint, and do not contain binders or adhesives that could contaminate the work. They are suitable for applying solvents or detergents to surfaces, dry wiping surfaces, and removing dust and splashes before painting. 【Features】 ■ Safety ■ Low cost ■ High strength ■ Low lint *For more details, please refer to the PDF document or feel free to contact us.

• paint

The "BD-01" is a buff duster that easily removes compound residue. Simply apply it to the surface of the buff while the polisher is rotating. It blows air at a wide angle, making it effective for blowing off water after washing and for cleaning the interior (especially fabric seats). 【Features】 ■ Easily cleans buffs without damaging the material of wool or sponge buffs. ■ The four nozzles emit powerful air in a shape that does not damage the buff. *For more details, please download the PDF or feel free to contact us.

• Other cleaning tools