日進 List of Products and Services

The "Falcon Gold End Mill" is an end mill for stainless alloy steel that allows for heavy cutting at high feed rates under cutting conditions that were previously unimaginable. It has received high praise for significantly improving burrs, even with materials like SS400 that tend to produce burrs easily, and it performs well across a wide range of materials from carbon steel and mild steel to stainless alloys and titanium alloys! It is very resistant to vibration and allows for high feed rates. The helix angle is 40°-42°. If you are looking for an end mill for machining difficult materials, please feel free to contact us. 【Features】 ■ Maintains cutting edge sharpness while also preserving blade strength ■ Adopts a high slip SPWC coating for excellent sliding properties (you will understand if you touch it) ■ Helix angle of 40°-42° with uneven lead ■ Designed for high rigidity, making it very resistant to vibration and capable of high feed rates *For more details, please refer to the PDF document or feel free to contact us.

• End Mills

Nisshin frequently accepts requests for regrinding and recoating. Among them, the most popular is the SPWC coating used on our best-selling product, the Falcon end mill! We will regrind the end mill you provide and return it with this coating applied. Our regrinding method uses a unique process that finishes the grinding surface more beautifully than commercially available products. Features of SPWC coating: - Excellent heat resistance - Excellent anti-welding properties - Good slip properties - High film hardness *For more details, please refer to the PDF document or feel free to contact us.

• End Mills

Are you really satisfied with the current conditions? Our customers are continuously improving their cutting conditions! In SUS machining, some customers have achieved a productivity increase of 1.5 to 5 times. The 'NISSIN FALCON ENDMILL' is a cutting tool developed by our designers who were concerned that the cutting conditions for difficult-to-machine materials in aerospace-related applications are slower in Japan compared to Europe and the United States. It was created to solve the challenge of how to improve the machining efficiency of difficult-to-machine materials with poor thermal conductivity below HRC50. ~Features~ ◆ A tool specifically designed for machining difficult-to-machine materials such as SUS, titanium, and nickel alloys, primarily for the aerospace and semiconductor industries. ◆ The design concept is to achieve both 'rigidity and cutting performance' and to triple the conventional cutting conditions for difficult-to-machine materials. ◆ It is made from a carbide substrate that is very resistant to breakage and has minimal chipping. ◆ It is characterized by significantly increasing cutting conditions compared to conventional tools in difficult-to-machine material processing. ◆ It excels in full-slot machining of heat-resistant alloys. Why not question your company's common sense regarding difficult-to-machine processing?

• byte

The "Falcon Wave End Mill" is an end mill specialized for difficult-to-cut materials, particularly effective on stainless steel and titanium alloys. While its rigidity is slightly lower compared to the White End Mill, it cannot increase the cutting depth (ae) like the White End Mill; however, it allows for long-lasting cutting under harsh feed conditions. This product has been very well received by a wide range of customers. 【Features】 - High heat resistance, exceptional coating performance; very effective for machining heat-resistant alloys such as stainless steel and Ti-6Al-4V when used with low cutting depth and high feed. - Outstanding sharpness. - Special blade design reduces cutting resistance to the limit. *For more details, please refer to the catalog or feel free to contact us.

• byte

The "Falcon Ball End Mill" is an end mill specialized for high-speed machining of stainless alloys, titanium alloys, and heat-resistant alloys. It enables high-performance cutting under harsh conditions. This product has been greatly appreciated by a wide range of customers. 【Features】 - High heat resistance and excellent sliding coating; very effective for heat-resistant alloys and machining that generates heat, such as stainless alloys and Ti-6Al-4V. - Outstanding sharpness. *For more details, please refer to the catalog or feel free to contact us.

• byte

The "Falcon Short End Mill" is an end mill specialized for difficult-to-cut materials such as stainless alloys, titanium alloys, and heat-resistant alloys in CNC automatic lathe processing. It enables high-performance cutting under harsh conditions. This product has been greatly appreciated by a wide range of customers. 【Features】 - High heat resistance and excellent sliding coating; very effective for heat-resistant alloys and machining that generates heat, such as stainless alloys and Ti-6Al-4V. - Exceptional sharpness, making it very effective for materials like SS400, which tend to produce burrs. - Special anti-vibration processing significantly reduces chatter. *For more details, please refer to the catalog or feel free to contact us.

• byte

The "Falcon White End Mill" is an end mill designed to enhance cutting conditions while minimizing the risk of deflection, specifically for Invar material, which is a nickel alloy and low thermal expansion steel. It enables high-performance cutting under harsh conditions. This product has been greatly appreciated by a wide range of customers. 【Features】 - High heat resistance, exceptional coating performance, and very effective for heat-resistant alloys and machining that generates heat, such as Invar and Ti-6Al-4V. - Outstanding sharpness. - Special anti-vibration processing significantly reduces cutting resistance. *For more details, please refer to the catalog or feel free to contact us.

• byte

The "Falcon White End Mill" is an end mill specialized for difficult-to-cut materials suitable for stainless steel and heat-resistant steel. It enables high-performance cutting under harsh conditions. This product has been greatly appreciated by a wide range of customers. 【Features】 - High heat resistance, exceptional coating performance; very effective for heat-resistant alloys and machining that generates heat, such as Hastelloy and Ti-6Al-4V. - Outstanding sharpness. - Special anti-vibration processing significantly reduces cutting resistance. *For more details, please refer to the catalog or feel free to contact us.

• byte

The "Falcon White End Mill" is an end mill specialized for difficult-to-cut materials suitable for stainless steel and heat-resistant alloys. It enables high-performance cutting under harsh conditions. This product has been greatly appreciated by a wide range of customers. 【Features】 - High heat resistance, exceptional coating performance; very effective for heat-resistant alloys and processes that generate heat, such as Hastelloy and Ti-6Al-4V. - Outstanding sharpness. - Special anti-vibration processing reduces cutting resistance to the absolute minimum. *For more details, please refer to the catalog or feel free to contact us.

• byte

The "Falcon White End Mill" is an end mill specialized for difficult-to-cut materials suitable for stainless steel and heat-resistant steel. It enables high-performance cutting under harsh conditions. If, due to customer circumstances, dry cutting is absolutely necessary, this end mill demonstrates outstanding performance. Of course, the best cutting is with water-soluble cutting oil. This product has been greatly appreciated by a wide range of customers. 【Features】 - Exceptional coating performance; very effective for heat-resistant alloys and machining that generates heat, such as Hastelloy and Ti-6Al-4V. - Outstanding sharpness. - Special anti-vibration processing reduces cutting resistance to the limit. *For more details, please refer to the catalog or feel free to contact us.

• byte

The "NISSIN FALCON Double-Head Chamfer Cutter" is highly recommended for anyone involved in chamfering processes, from stainless steel and heat-resistant alloys to aluminum and cast machining. It is the number one repeat ranking double-head chamfer cutter of Nissin for 2024!! Many companies have not made progress in reviewing cutting conditions for chamfering, but how about being able to chamfer at double speed?? Additionally, with two corners on the blade, you get double the value with a single purchase. This product has been greatly appreciated by a wide range of customers. 【Features】 - High heat resistance and excellent sliding coating performance. Particularly effective for materials that tend to produce secondary burrs. - Please try it out!! You will understand its outstanding sharpness just by touching it!! - A special grinding method reduces cutting resistance to the absolute minimum. *For more details, please refer to the catalog or feel free to contact us.

• byte

The "Falcon Wave End Mill" is an end mill specialized for difficult-to-cut materials with low thermal conductivity, such as stainless steel, titanium alloys, and heat-resistant steel, which tend to generate high cutting heat at the cutting edge. It also demonstrates outstanding performance on soft steels like SS400, which are prone to welding. High-performance cutting is possible under high-speed feed conditions. This product has greatly improved processing efficiency for a wide range of customers, from mass production of carbon steel to difficult-to-cut materials, and they are very pleased with the results. 【Features】 - High heat resistance and excellent sliding coating performance; very effective for heat-resistant alloys like Ti-6Al-4V and Hastelloy X, as well as for machining that generates heat. - Exceptional sharpness. - Special anti-vibration processing reduces cutting resistance to an extreme level. *For more details, please refer to the catalog or feel free to contact us.

• byte

The "Falcon White End Mill" is a specialized end mill designed for difficult-to-cut materials that require both high rigidity and sharp cutting ability, such as stainless steel and heat-resistant steel, which have high cutting resistance. It enables high-performance cutting under harsh conditions. This product is greatly appreciated by a wide range of customers. 【Features】 - High heat resistance with exceptional coating performance; very effective for heat-resistant alloys and processes that generate heat, such as Hastelloy and Ti-6Al-4V. - Outstanding sharpness. - Special anti-vibration processing significantly reduces cutting resistance. *For more details, please refer to the catalog or feel free to contact us.

• byte

The "Falcon White End Mill" is an end mill specialized for difficult-to-cut materials such as hard stainless steel (equivalent to 630, 440C, etc.) and heat-resistant alloys. It enables high-performance cutting under harsh conditions. This product has been greatly appreciated by a wide range of customers. 【Features】 - High heat resistance and excellent lubricity coating; very effective for heat-resistant alloys and machining that generates heat, such as SUS630 and Hastelloy X, In718, etc. - The most rigid tool in Nisshin's standard end mill catalog. - Special anti-vibration processing significantly reduces chatter. *For more details, please refer to the catalog or feel free to contact us.

• byte

Our company offers a wide range of cutting tools for CNC precision automatic lathes and general-purpose lathes, including "through-cutting chips" and "finishing chips." In addition to the "Premium Bites" with special coating treatment, we have the "TMR type" finishing chips suitable for machining die steel and difficult-to-cut stainless steel, as well as "diamond-coated tools" suitable for cutting carbon fiber composites and ceramics. 【Product Lineup (Partial Excerpt)】 ■ Through-cutting chips 'NK Series' ■ High-rigidity throwaway chips 'SL Series' ■ Carbide solid end mills 'Eco End Mill' ■ Small diameter medium grinding 'NS Series' *We have many other products available. Please refer to the materials for more details.

• byte
• End Mills
• Other cutting tools

This catalog features "cutting tools" for CNC precision automatic lathes and large and small general-purpose lathes manufactured and sold by our company. It includes products such as "cut-off tips" and "finishing tips," which are types of "throwaway tips," as well as "premium inserts" with special coating treatments, and "carbide solid tools" like end mills and vanishing reamers. The catalog also contains a cost model table for using regrindable throwaway tips, examples of rigidity tests using "cut-off tips," and a guide table for various tool materials. 【Featured Products (Partial List)】 ■ Regrindable throwaway tips ■ Cut-off tips "NK Series / CT Series" ■ Grooving tips "MDE" ■ Finishing tips "UNR/AR/ABR/AKR" ■ Precision finishing front cutting tips "TMR98" *You can view it via "PDF Download." Please feel free to contact us for inquiries.

• Other cutting tools

The "TM Holder" is a pre-ground chip for precision machining suitable for die steel and stainless steel. It employs a grinding breaker focused on cutting performance, allowing for a single pass with a sharp cutting edge and a maximum cutting depth of 10mm. Due to its extremely strong tool rigidity and long lifespan, it is adopted by many companies for precision machining of difficult-to-cut and super difficult-to-cut materials. Additionally, compatible holders "TMKHR 1010/1212/1616/2020" are available in the lineup. 【Features】 ■ Capable of single pass machining with a sharp cutting edge ■ Utilizes a grinding breaker focused on cutting performance ■ Excellent holder rigidity ■ Maintains superior machining accuracy ■ Particularly effective for die steel and difficult-to-cut stainless steel *For more details, please refer to the PDF document or feel free to contact us.

• Other cutting tools

At Nisshin, we handle "Diamond Coated Tools." By applying diamond coating using the CVD method to our ultra-fine particle substrate, we enable effective cutting of materials known as ultra-hard-to-cut, such as carbon fiber composites and ceramics. 【Features】 ■ High hardness (Hv7000–9000) ■ Low friction coefficient (0.05–0.1) ■ High thermal conductivity ■ Corrosion resistance ■ Wear resistance *For more details, please refer to the PDF document or feel free to contact us.

• Other cutting tools

The "support base (blade) for centerless grinding machines" is a product with a separation structure between the carbide and steel body. It significantly improves upon conventional products in terms of wear resistance, durability, and cost-effectiveness. Additionally, it is equipped with excellent features that surpass those of conventional products. Our company also handles wear-resistant tools made of carbide, so please feel free to consult us if you have any requests. 【Features】 ■ The base material can be used semi-permanently due to hardening. ■ The length of a single carbide piece can be manufactured up to approximately 1 meter. ■ Carbide chip widths can be produced at 5 mm or more. ■ In the event of carbide breakage, only the cartridge of that part needs to be replaced, making it very economical. ■ There is no warping due to aging. *For more details, please download the PDF or feel free to contact us.

• Other work tools
• Other machine elements

- Through-cutting chip ■ It has strong rigidity due to its separable clamp. ■ It is a chip with a sharp cutting edge, featuring a nose radius of "0". ■ It can be re-sharpened and is therefore a very economical chip. - Chip with rake for through-cutting ■ This breaker-equipped chip is very popular for pipe materials and difficult-to-cut materials. ■ It is a chip with an excellent sharp cutting edge. ■ It has a very long lifespan for processing difficult-to-cut materials.

• Other cutting tools

- External groove cutting chip ■ Capable of deep penetration and lateral feeding. ■ Highly praised for difficult-to-cut materials such as bearing steel.

• Other cutting tools

- Rear cutting (back cutting) chip ■ Rigid and capable of powerful feed processing ■ Effective for machining difficult materials such as bearing steel ■ 7mm cutting edge allows for deep cutting ■ Available with and without breakers - Front cutting chip ■ Rigid and capable of powerful feed processing ■ Effective for machining difficult materials such as bearing steel ■ Available with and without breakers

• Other cutting tools

■ Chips that are less likely to have cut-off dowels due to pin angles ■ Chips that can be re-sharpened, resulting in very low running costs 　→ The protrusion amount can be adjusted with a fixture ■ Suitable for cutting thick materials up to φ32 ■ Made from ultra-hard ultra-fine particle substrate with TiAlN coating ■ Sharp chips with excellent cutting performance

• Other cutting tools

■SPC coated throwaway chips significantly extend tool life. ■Achieves a reduction in cutting time (depending on cutting conditions, down by 30-50%↓↓). ■Even when used under the same conditions as before, the high durability contributes to reduced tool costs. ■TMR chips offer sharp cutting performance, allowing for single-pass machining. ■The holder has high rigidity, minimizing vibrations.

• Other cutting tools

The DCGT11T30 -TW series can be used in both directions and has excellent cutting performance, with outstanding results in pre-machining small diameter titanium round bars. Additionally, regarding cutting performance, the CCGT/DCGT-RK series, which is designed for one-sided use, has the best cutting performance in our company.

• Other cutting tools

The "TG6, TG9 series" are throwaway chips for external diameter threading that conform to ISO standards. They are particularly effective for stainless steel machining and difficult-to-cut materials. We offer both types with and without a chamfered edge. 【Chip Material Types】 ■ NC-35B: Lifespan comparable to general market products ■ SPC-30X: Can cut even HRC60° materials with ease *For more details, please refer to the PDF document or feel free to contact us.

• byte

The "TN6 and TN9 series" are ISO-compliant throwaway chips for internal diameter threading. They demonstrate exceptional performance in stainless steel machining and difficult-to-cut materials, and due to their polished cutting edges, they provide excellent sharpness and a clean surface finish. Additionally, we also manufacture Whitworth screws, Unified screws, and more, so please feel free to contact us. 【Product Lineup】 ■ Carbide Solid Tool "NC35" - Without chamfering edge - With chamfering edge (standard, Unified) ■ Throwaway Chip "NC35B" - With chamfering edge ■ Holder ■ Micro-diameter threading tool (custom-made) *For more details, please refer to the PDF document or feel free to contact us.

• byte

The "SL Series" is a high-rigidity insert produced by Nisshin Co., Ltd., which manufactures carbide inserts and precision throwaway inserts. The back-turning inserts come in two shapes: the single-hole insert "SUAR" and the two-hole insert "WUKR," which allows for one-pass machining even for processes with long cutting edges and significant material removal. Additionally, we offer a lineup of parting inserts, threading inserts, and holders. 【Features】 ■ Parting Inserts Fixed to the holder with serration Can machine materials up to HRC60° ■ Back-Turning Inserts Capable of one-pass machining for processes with long cutting edges and significant material removal (WUKR) ■ Threading Inserts Can be used for threading operations after back-turning *For more details, please refer to the PDF document or feel free to contact us.

• byte

The "Eco End Mill" is an end mill that boasts high hardness with NC25B (TiAIN coating). It is compatible with a wide range of materials such as steel and stainless steel, and we offer both 2-flute and 4-flute options at an affordable price. Custom sizes and shapes can also be manufactured upon request. In addition, we have a lineup of high-performance end mills called the "Short End Mill" series, which provides stable quality. 【Features (Eco End Mill)】 ■ Easy-to-use low-cost type ■ High hardness with NC25B (TiAIN coating) ■ Recommended for NC automatic lathes and complex machining ■ Available in both 2-flute and 4-flute options at an affordable price ■ Usable for a wide range of materials from non-ferrous metals to cast iron *For more details, please refer to the PDF document or feel free to contact us.

• End Mills

The "Small Diameter Internal Grooving" is a series of small diameter solid boring tools that responds to the diversification of internal diameter machining. The "NS10 type" of internal grooving boring tool is suitable for precision machining with a nose radius of "0" down to a minimum hole diameter of φ3.6. For the brazed type, we offer SLT20 (cermet) and SLT45 (K type), which are typically prone to chipping. The base material flexibly applies the chip to the workpiece to prevent chipping. Additionally, we have a lineup that includes grooving tools "NS60," end face grooving tools "NS62," and contour machining tools "NS30." 【Features (NS10 type)】 ■ Nose radius "0" down to a minimum hole diameter of φ3.6 ■ For the brazed type, we offer SLT20 and SLT45, which are typically prone to chipping ■ SLT60 (fine particle type) is also available to accommodate various workpiece materials ■ Sharp cutting performance with NC35B/SLT60 and high hardness SLT20/SLT45 allows for use in various machining applications ■ Custom manufacturing is possible if the nose radius or other specifications do not match *For more details, please refer to the PDF materials or feel free to contact us.

• Other cutting tools
• End Mills

We introduce examples of manufacturing various shapes of bits, cutting tools, and wear-resistant products using our silver brazing. Starting with the production of "crushing blades" used in machines such as PET bottle crushers, glass crushers, and food recycling crushers, we leverage over 50 years of accumulated experience to respond to various manufacturing needs, including "hard special brazed bits and high-speed steel custom bits" and "cutting blades." We sincerely respond to detailed requests and contribute to the creation of better products. 【Manufacturing Examples (Excerpt)】 ■ Carbide special brazed bits and high-speed steel custom bits Internal and external diameter grooving bits, center-recessed bits, reverse sticks ■ Crushing blades Hammer blades, propeller blades ■ Cutting blades Rotating crushing blades, crushing blades, scrap chopper blades ■ Small cutting blades ■ Canner blades *For more details, please refer to the PDF materials or feel free to contact us.

• byte
• Other cutting tools

The "LM20" series is highly praised for its excellent performance with stainless steel and is also well-suited for difficult-to-cut materials. We offer a rich lineup, including the hole threading tool "NS5 type," internal threading tools "15 type and 16 type," as well as the Elicon follower and single-edged tool "95 type R." 【Lineup (excerpt)】 ■ NS5 type: Hole threading tool ■ 15 type and 16 type: Internal threading ■ 95 type R: Elicon follower and single-edged tool ■ Other sizes: 31, 32 type, 33, 34 type, 35 type, 36 type, 37, 38 type, 39, 40 type, 41, 42 type *For more details, please refer to the PDF materials or feel free to contact us.

• Other cutting tools
• byte

"Premium Bites" are CNC precision automatic lathe bites with a special coating treatment on the top surface of the chip. The cutting edges are less prone to sticking, making it easier to maintain stable machining dimensions. Additionally, compared to conventional brazed bites, the tool life is extended by 2 to 5 times, and the cutting speed can be increased by 30% to 40%. Moreover, due to the excellent tool life, we offer a variety of PB bites and chip materials for precision automatic lathes that are very popular. [Features] - The top surface of the chip has a special coating treatment - The cutting edges are less prone to sticking, making it easier to maintain stable machining dimensions - Compared to conventional brazed bites, tool life is extended by 2 to 5 times, and cutting speed can be increased by 30% to 40% *For more details, please refer to the PDF document or feel free to contact us.

• byte

The "PM-KN70" is a new type of carbide cutter blade that is resistant to chipping. It uses a rigid iron material for the base, making it less prone to warping and distortion. Additionally, it is said that the yield and blade longevity of the product have significantly improved. We offer a lineup that includes the oval-shaped K type and the punch type N type. 【Features】 ■ Small chipping and fewer instances of chipping ■ Good cutting performance, which reduces heat buildup ■ High-quality and rigid base that does not warp *For more details, please refer to the PDF document or feel free to contact us.

• Other cutting tools

In the field of ultra-hard tools for small part turning, do you have any concerns such as "the tool life is unsatisfactory for difficult-to-cut materials (stainless steel, heat-resistant alloy steel, hardened materials, etc.), the finished surface is not satisfactory, or there are no economical chips available"? At Nisshin Corporation, we address these concerns with our new material type "SPC-30X" (which has received great acclaim for having over twice the tool life). Customers who have used it are very pleased. Please try it for yourself to see if it's true. 【Cutting Example】 ■SUS420J2 Through Cutting - Cutting Conditions: φ6.2 material, 6,400 RPM (125m), f=0.04mm/rev - Nisshin Model Number: "NTR6010-5°" (2-corner chip) - User's Comment: The tool life of over 10,000 pieces per corner has been a great help. *For more details, please refer to the PDF document or feel free to contact us.

• Other cutting tools

Nisshin Co., Ltd., which specializes in the manufacture and sale of ultra-hard carbide tools made from ultra-fine particles with excellent wear resistance and toughness, as well as the production of precision throwaway bits, offers "Ultra-Hard Polished Round Bars." The round bar polished finishing chips are suitable for inner diameter finishing and flat cutting. Please feel free to use them as needed for various applications. 【Features】 ■ Size: φ0.5 to φ20 ■ Half-moon blanks are also available *For more details, please refer to the PDF document or feel free to contact us.

• Other cutting tools
• Other abrasives
• others

Nisshin Co., Ltd., which mainly manufactures and sells carbide cutting tools made from ultra-fine particles with excellent wear resistance and toughness, as well as precision throwaway bits, handles the 'Lego Chuck' from Swiss company LegoFix. This product is powerful and high-precision. Please feel free to contact us for any technical inquiries. 【Other products we handle】 ■ Carbide end mills ■ Collet chucks ■ Carbide micro drills ■ Pin gauges ■ Rolling dies ■ Screw gauges, etc. *For more details, please refer to the PDF document or feel free to contact us.

• Other cutting tools
• Other abrasives
• Other processing machines

Nisshin Co., Ltd., which specializes in the manufacture and sale of ultra-hard carbide tools made from ultra-fine particles with excellent wear resistance and toughness, as well as the production of precision throwaway bits, offers "Color for Cutters." This product is for spacers of combined cutters. It comes in hole sizes of 25.4 mm and 15.875 mm, with thicknesses ranging from 0.8 to 2.0 mm in increments of 0.1 mm. For technical inquiries, please feel free to contact us. 【Other Products Available】 ■ Carbide End Mills ■ Collet Chucks ■ Carbide Micro Drills ■ Pin Gauges ■ Rolling Dies ■ Screw Gauges, etc. *For more details, please refer to the PDF document or feel free to contact us.

• Other cutting tools
• Other abrasives
• Other processing machines

Nisshin Co., Ltd., which specializes in the manufacturing and sales of carbide cutting tools made from ultra-fine particles with excellent wear resistance and toughness, as well as the production of precision throwaway bits, offers "carbide end mills." We have φ20, φ25, φ30×6, φ45×12.7, and φ70×25.4 available, with thicknesses ranging from 0.2 to 3.0 in increments of 0.1. For technical inquiries, please feel free to contact us. 【Other Products Available】 ■ Carbide polished round bars ■ Knurled holders ■ Knurled inserts ■ Lego chucks ■ Color for cutters, etc. *For more details, please refer to the PDF materials or feel free to contact us.

• Other cutting tools
• Other abrasives
• Other processing machines

Nisshin Co., Ltd., which manufactures and sells ultra-hard carbide tools made from ultra-fine particles with excellent wear resistance and toughness, as well as precision throwaway tools, handles "collet chucks." These products are for tabletop lathes and CNC automatic lathes. Please feel free to contact us for any technical inquiries. 【Other Products Available】 ■ Carbide polished round bars ■ Knurled holders ■ Knurled inserts ■ Lego chucks ■ Color for cutters, etc. *For more details, please refer to the PDF document or feel free to contact us.

• Other cutting tools
• Other abrasives
• Other processing machines

Nisshin Co., Ltd., which mainly manufactures and sells ultra-hard carbide tools made from ultra-fine particles with excellent wear resistance and toughness, as well as precision throwaway bits, offers "Ultra-Hard Micro Drills." We have sizes ranging from φ0.1 to φ3.0 in increments of 0.01. The shank is φ3. Please feel free to contact us for any technical inquiries. 【Other Products Available】 ■ Ultra-Hard Polished Round Bars ■ Knurled Holders ■ Knurled Inserts ■ Lego Chucks ■ Color for Cutters, etc. *For more details, please refer to the PDF document or feel free to contact us.

• Other cutting tools
• Other abrasives
• Other processing machines

Nisshin Co., Ltd., which mainly manufactures and sells ultra-hard carbide bits made from ultra-fine particles with excellent wear resistance and toughness, as well as precision throwaway bits, handles "pin gauges." We offer sizes from φ0.5 to φ15.05 in increments of 0.01. Please feel free to contact us for technical inquiries. 【Other Products Available】 ■ Carbide Grinding Rods ■ Knurled Holders ■ Knurled Inserts ■ Lego Chucks ■ Color for Cutters, etc. *For more details, please refer to the PDF document or feel free to contact us.

• Other cutting tools
• Other abrasives
• Other processing machines

Nisshin Co., Ltd., which specializes in the manufacturing and sales of ultra-hard bits made from ultra-fine particles with excellent wear resistance and toughness, as well as the production of precision throwaway bits, offers "Rolling Dice." This product is a rolling die for automatic lathes and small diameters. It boasts high precision and excellent durability. For technical inquiries, please feel free to contact us. 【Features】 ■ Rolling die for automatic lathes and small diameters ■ High precision and excellent durability ■ M1 to M3 standard pitch, M3.5 to M5 extra fine pitch *For more details, please refer to the PDF document or feel free to contact us.

• Other cutting tools
• Other abrasives
• Other processing machines

Nisshin Co., Ltd., which specializes in the manufacturing and sales of carbide cutting tools made from ultra-fine particles with excellent wear resistance and toughness, as well as precision throwaway tools, offers "thread gauges." We provide plug gauges and ring gauges that can be used for coarse, fine, and pipe threads. Please feel free to contact us for any technical inquiries. 【Other Products Available】 ■ Carbide polished round bars ■ Knurled holders ■ Knurled inserts ■ Lego chucks ■ Color rings for cutters, etc. *For more details, please refer to the PDF document or feel free to contact us.

• Other inspection equipment and devices
• bolt
• nut

This product is a grooving chip with a mirror finish that provides a sharp cutting edge. Compared to commonly used grooving chips, it has a longer blade length, allowing for side cutting after the initial cut, making it suitable for processing slightly wider grooves. Additionally, the height of the core remains unchanged, ensuring safe use. The groove widths are available from 0.52 to 3.0 mm. 【Features】 ■ Long blade length ■ Strong in lateral feeding ■ Regrindable ■ Adjustable chip projection *For more details, please refer to the PDF document or feel free to contact us.

• Other cutting tools