メイセイ List of Products and Services

The "SD-P5 model" is a solvent drip supply device that allows for easy viscosity adjustment for small lot printing. The amount of solvent dripping can be freely adjusted using a needle valve. Additionally, solvent-resistant hoses are used. 【Features】 ■ Easy viscosity adjustment for small lot printing ■ Solvent drip amount can be freely adjusted with a needle valve ■ Uses solvent-resistant hoses ■ Solvent tank and mounting hardware are included *For more details, please refer to the PDF document or feel free to contact us.

• Printing Machinery
• Other painting machines

The "PC-1 type" is a heating tank that keeps part coat liquids and adhesives stored in one-gallon cans warm using hot water. It maintains the temperature of the part coat liquids and adhesives in the one-gallon cans by heating the electric heater when the water temperature drops, thanks to an automatic temperature controller. Additionally, it comes with a storage tank that includes wheels for easy mobility and inlet and outlet ports for viscous materials. 【Features】 ■ Keeps part coat liquids and adhesives in one-gallon cans warm using hot water ■ The automatic temperature controller heats the electric heater to maintain a constant warm water temperature when the water temperature drops ■ The heating tank can hold two one-gallon cans and can also keep a spare can warm ■ When used with a viscosity controller, it can automatically control viscosity and liquid temperature ■ Comes with a storage tank that includes wheels and inlet and outlet ports for viscous materials *For more details, please refer to the PDF document or feel free to contact us.

• tank
• Printing Machinery
• Other painting machines

The "VG Series" is a viscosity controller recommended for gravure printing and lamination, designed for standard viscosity range control. It performs four functions in one unit (circulation, viscosity measurement, solvent supply, and stirring). This series features a stainless steel box for easy cleaning of the outer panel. Additionally, it adopts a top tray type to prevent solvent from entering the electrical chamber during solvent tank refills. 【Features】 ■ Stainless steel box ■ Dedicated door for the pump chamber ■ Top tray type ■ Exhaust cleaner ■ Digital pressure switch *For more details, please refer to the PDF document or feel free to contact us.

• Printing Machinery
• Other painting machines

The "VA Series" is a viscosity controller recommended for varnishes, paints, and adhesives, designed for special viscosity range control. It features a stainless steel box that makes cleaning the exterior easy. Additionally, it employs an air supply linked to the power ON to prevent pump operation without lubrication. The diaphragm pump is attached using butterfly nuts, making it easy to install and remove the pump. 【Features】 ■ Stainless steel box ■ Dedicated door for the pump chamber ■ Upper tray type ■ Exhaust cleaner ■ Digital pressure switch *For more details, please refer to the PDF document or feel free to contact us.

• Other painting machines
• Printing Machinery

The "VA-03,05 series" is a viscosity controller recommended for marking and coloring license plates, designed for small quantities of liquid. It features a stainless steel box that makes cleaning the exterior easy, and the box's sealing has been improved. Additionally, it uses a very small intake strainer that prevents clogging inside the pump, with a wire mesh of 12 mesh (opening size 1.32mm). 【Features】 ■ Stainless steel box ■ Improved box sealing ■ Exhaust cleaner ■ Enhanced durability of diaphragm pump ■ Upper tray type *For more details, please refer to the PDF document or feel free to contact us.

• Printing Machinery
• Other painting machines
• Other markings

"Super 1000" is a specialized lubricant used when operating viscosity controllers and diaphragm pumps. It increases the viscosity of the oil, extending the retention time within the diaphragm pump. It comes in a 1-liter resin bottle, designed with a pointed cap for easy pouring into the oil tank of the viscosity controller. 【Features】 - Increases the viscosity of the oil, prolonging the retention time within the diaphragm pump. - Uses special additives to prevent expansion and contraction of rubber rings due to the oil. - 1-liter resin bottle. - Pointed cap for easy pouring into the oil tank of the viscosity controller. *For more details, please refer to the PDF document or feel free to contact us.*

• Lubricants
• Printing Machinery
• Other painting machines

The "SN Type Series" is a spout nozzle that attaches to the pouring opening of a one-gallon can, preventing liquid splatter and making it easier to pour. Being made of thin film, it is lightweight and can be easily and securely attached to the one-gallon can. It features an air release mechanism, ensuring that the liquid flows out smoothly without pulsation. We offer two types to match the outer diameter of the one-gallon can: one for 40mm (SN-40 type) and one for 50mm (SN-50 type). 【Features】 ■ Lightweight due to thin film construction ■ Easily and securely attaches to one-gallon cans ■ Smooth, pulsation-free liquid flow ■ Comes with a cap, eliminating concerns about liquid leakage ■ Two types available to match the outer diameter of one-gallon cans: - 40mm (SN-40 type) - 50mm (SN-50 type) *For more details, please refer to the PDF document or feel free to contact us.

• nozzle
• Printing Machinery

The "SP-E Type Series" is a circulation pump for inks and paints that uses a diaphragm pump to draw in and discharge the liquid, preventing the formation of dry films on the liquid surface and ensuring proper mixing. Since it operates with compressed air, it is a completely explosion-proof type. Additionally, it uses a fully sealed and self-priming diaphragm pump, which eliminates liquid leakage and prevents an increase in liquid temperature. 【Features】 ■ Completely explosion-proof type ■ No liquid leakage, no increase in liquid temperature ■ Adjustable circulation volume (discharge amount) ■ Improved pump durability ■ Clean recovery of exhaust oil *For more details, please refer to the PDF materials or feel free to contact us.

• Other pumps
• Printing Machinery
• Other painting machines

The "VG-W type" is a viscosity controller with an automatic cleaning function that uses solvents and foam for powerful cleaning. It cleans the pump, solvent check valve, suction strainer, suction hose, and discharge hose. Additionally, it automatically stops about one minute after cleaning, reducing the time and effort required for cleaning. 【Features】 ■ Uses approximately 600cc of cleaning solvent ■ Comes with a cleaning bucket ■ Made with a stainless steel box ■ Adopts an upper tray type ■ Equipped with an exhaust cleaner *For more details, please refer to the PDF document or feel free to contact us.

• Printing Machinery
• Other painting machines

The "Gravure Printing Ink Stirring Rod" is a stirring rod that prevents ink from clumping and drying film by stirring at high speeds. With the installation of a rubber ring, the protrusions of the stirring rod do not directly touch the plate, preventing unevenness on the printing surface. Additionally, hooks are attached to all models to prevent bending and scratches during storage. 【Features】 - Prevents bubbles in the ink from accumulating on the left and right sides of the plate - Uses a magnet to attract and remove iron powder from the ink - Tape indicating the position of the magnet - Hooks attached to all models to prevent bending and scratches during storage - Rubber rings installed on both ends of S rolls, P rolls, AMT rolls, and AF rolls *For more details, please refer to the PDF document or feel free to contact us.

• Printing Machinery

The "VF-03 Series" is an air-driven mixer that stirs liquids using an air-driven motor. The operation and stop of stirring can be controlled with a one-touch lever. Additionally, the stirring speed can be adjusted continuously from zero to maximum. It can be adjusted for installation according to the outer diameter of tanks, in addition to being suitable for one-gallon cans and pails, using a sliding mechanism for the fittings. 【Features】 ■ Low noise due to the piston-type air motor ■ High stirring capability with stainless steel blades - Type K has one blade installed - Type D has two blades installed ■ The length of the stainless steel blade shaft can be changed to your desired length ■ A handy type "VF-03T" with a handle is also available *For more details, please refer to the PDF document or feel free to contact us.

• Printing Machinery
• Other painting machines

The "VT Series" is a viscosity controller model equipped with temperature adjustment functions, suitable for tasks requiring viscosity and liquid temperature management. Made of stainless steel, the box allows for easy cleaning of the outer surface. Additionally, it features air supply linked to the power ON, preventing pump operation without lubrication. 【Features】 ■ Simultaneous control of ink liquid temperature and viscosity ■ Heater unit has a pressure-resistant explosion-proof structure for safety ■ Temperature display and setting are shown on a high-brightness LED digital display ■ Solvent supply stop function below the set temperature ■ Maximum usable temperature: 60℃ *For more details, please refer to the PDF document or feel free to contact us.

• Printing Machinery
• Other painting machines

The "FH-250L model" is an ink and paint filtration filter that removes dirt and foreign substances from liquids using a cartridge filter. The filter unit is installed on the discharge side of the viscosity controller or circulation pump. Replacing the filter is easy; simply loosen the handle and remove the case. 【Features】 ■ Filter replacement is easy; just loosen the handle and remove the case. ■ Filter length: 250mm ■ Two types of filter materials: Type P = polypropylene non-woven fabric and Type S = stainless steel. ■ The ink level in the confirmation pipe rises, allowing you to check when it's time for replacement. ■ The filter can remove fine bubbles from ink and paint. *For more details, please refer to the PDF document or feel free to contact us.

• Other filters
• Printing Machinery

The "LC-15 type" is a level controller that detects the decrease in liquid level of ink and paint using a float sensor. It detects the liquid level with a float-type sensor and maintains the level constant with an air-driven diaphragm pump. Additionally, both the diaphragm pump and the float sensor are completely explosion-proof types that operate with compressed air, ensuring safety. 【Features】 ■ Completely explosion-proof type that operates with compressed air ■ Mounting brackets are available for ink trays and for one-gallon cans (optional) *For more details, please refer to the PDF document or feel free to contact us.

• Printing Machinery

The "HS-02 type" is a dedicated hose storage pole for viscosity controllers that stores the suction and discharge hoses of the viscosity controller. By placing the suction strainer and discharge nozzle into a bucket (3 liters), it prevents ink spills and keeps the factory floor clean. Additionally, it can also store the power cord and air hose along with the suction and discharge hoses. 【Features】 ■ Makes it easy to move by storing the suction and discharge hoses ■ Prevents ink spills and keeps the factory floor clean ■ Can also store the power cord and air hose along with the suction and discharge hoses ■ Cartridge replacement type, eliminating the need to clean the bucket ■ Can be easily attached to existing viscosity controllers *For more details, please refer to the PDF document or feel free to contact us.

• Printing Machinery
• others

The "VR Type Series" is a viscosity controller equipped with a data communication function that can send data to a computer. The transmitted data is automatically sent from the viscosity controller to the computer at 5-minute intervals, recording the history. The measurement interval can be changed from 1 minute to 30 minutes. Additionally, it is possible to pause and resume recording. Furthermore, we also offer the "VRII Type," which features a 7-inch LCD touch panel monitor and allows data to be saved to an SD card. 【Features】 ■ Data to be transmitted - PV measurement value - SV setting value - ALM viscosity alarm setting value - Liquid temperature value - Solvent supply count - Viscosity upper and lower limit alarm count - Pulsation count ■ Automatically sends data from the viscosity controller to the computer at 5-minute intervals, recording history ■ Measurement interval can be changed from 1 minute to 30 minutes ■ Records each data point whenever an alarm occurs ■ Capable of simultaneously recording 24-hour data from up to 10 units using dedicated software (separate computer required) *For more details, please refer to the PDF document or feel free to contact us.

• Printing Machinery
• Other painting machines

The "Garbage Removal Strainer GC Type" is a dedicated wire mesh strainer for the viscosity controller's suction inlet, designed to be attached to the end of the suction hose of the viscosity controller to prevent the intake of garbage, ink particles, paper scraps, wood chips, and other debris into the pump. It has a larger surface area than the wire mesh of the viscosity controller's suction strainer, allowing for long-term use. Additionally, the wire mesh can be easily replaced or cleaned by removing three butterfly bolts, which allows the cover to come off. 【Features】 ■ Prevents the intake of garbage, ink particles, paper scraps, wood chips, and other debris into the pump ■ Larger surface area than the wire mesh of the viscosity controller's suction strainer, allowing for long-term use ■ Wire mesh size is 14 mesh ■ The cover can be easily removed for wire mesh replacement or cleaning by removing three butterfly bolts *For more details, please refer to the PDF document or feel free to contact us.

• Other filters
• Printing Machinery

The "M Drain" is a compressed air moisture remover for viscosity controllers that removes over 99.5% of moisture due to the swirling effect. Unlike conventional hygroscopic filter types, the adoption of a stainless steel filter eliminates the need for filter replacement, requiring only cleaning once every six months. Furthermore, it features an auto-drain discharge system, making it maintenance-free. 【Features】 ■ Removes over 99.5% of moisture due to the swirling effect ■ Stainless steel filter type ■ No need for filter replacement; cleaning once every six months is sufficient ■ Maintenance-free with auto-drain discharge (manual discharge is also possible) *For more details, please refer to the PDF document or feel free to contact us.

• Other water treatment equipment
• Printing Machinery
• Other painting machines

Meisei's "Filtration Filter" is a filter that removes debris and iron powder from the ink, preventing doctoring and reducing printing defects. We offer three types of filters, including the bag-shaped "MS Filter" series that can be attached to the pump's discharge port, the "Subtank Filter" that is installed on top of the tank, and the "TG Filter" that can be freely cut and used. 【Features (MS Filter)】 ■ Bag-shaped filter made with solvent-resistant mesh ■ Mesh sizes available: 45, 70, 85, 100, and 140 ■ Shapes available: trapezoidal types 1 and 2, and rectangular type ■ Use type 2 or rectangular for pumps with high discharge volumes or when there is a lot of debris ■ In gravure printing, MP E70 type 1 is used *For more details, please refer to the PDF document or feel free to contact us.

• Other consumables
• Other filters
• Printing Machinery

The "Double Hose" is a soft, solvent-resistant hose designed for liquid transport that does not develop kinks. It prevents malfunctions in viscosity control caused by the hose bending or deforming. It is soft and does not develop kinks. Additionally, we offer a "Conductive Hose" that contains high-conductivity carbon to prevent issues caused by static electricity. 【Features】 ■ Improved viscosity control accuracy ■ Soft and kink-free ■ Solvent-resistant (inner side) ■ Low cost ■ Transparency (in the case of double hose) *For more details, please refer to the PDF document or feel free to contact us.

• hose
• Printing Machinery

The MS viscosity controller is a product that performs four functions in one unit (circulation, viscosity measurement, solvent supply, and stirring). It is widely used in various industries such as gravure printing, flexo printing, dry lamination, coating, marking, and painting. We have a demo unit available for free rental, so please feel free to contact us if you are interested. 【Features】 ■ Can reduce ink usage by approximately 20% ■ No liquid leakage and has self-priming capability ■ Cleaning can be completed in a short time with a small amount of solvent ■ Viscosity measurement display shows the seconds of the viscosity cup ■ Supports liquid volumes from 200cc to 200 liters and liquid viscosities from 5 CPS to 100,000 CPS *For more details, please download the PDF or feel free to contact us.

• controller
• Other processing machines