脇坂エンジニアリング List of Products and Services

The "CFP-6SP type" is a compact vacuum pressure forming machine designed to minimize mold costs and complete the process of forming and punching for small-batch, diverse products in the same operation. The forming molds are also small and inexpensive, and mold exchange operations are easy, allowing for quick setup changes. Frequent mold exchanges can increase the machine's operating rate. 【Features】 - The punching molds are small, with a compact feed direction, and can be produced at a very low cost. - Mold exchange operations are easy, enabling quick setup changes. - By attaching an accessory, it is possible to use Thomson blades. - It uses a mid-wavelength infrared radiator heater with high quick response capability. - The overall line length is 9 meters, allowing for very space-efficient placement. *For more details, please download the PDF or feel free to contact us.*

• Vacuum forming machine

The "DM-2 and DM-2K models" are upgraded foreign object removal devices that have been renewed from the DM-1 series, with enhanced functionality. After completing the static elimination and dust removal work, it is possible to automatically connect the product to a metal detector by rotating it to the reverse operation side. Of course, like the previous models, it is compact and includes built-in devices for generating dust removal air and dust collection. <Specifications> 【DM-2 Model (DM-2K Model)】 ■Product Size - Maximum: 220mm(A) × 220mm(B) × 70mm(H) - Minimum: 70mm(A) × 70mm(B) × 10mm(H) ■Product Stacking Height: 100 to 600mm(L) 【DML-2 Model】 ■Product Size - Maximum: 350mm(A) × 350mm(B) × 40mm(H) - Minimum: 200mm(A) × 200mm(B) × 10mm(H) ■Product Stacking Height: 100 to 500mm(L) *For more details, please download the PDF or feel free to contact us.

• Other packaging machines

The "WKS-1000 model" features a dust suction device at the end of the cutter's travel, making it a circular blade, traveling type, one-shot cutting shear device that can remove cutting dust. Since it uses a circular blade, there is no danger like that of a guillotine. Additionally, even if fingers get caught in the sheet holding fixture, the cutter will not move due to the sensor's operation, ensuring that fingers are not cut and safety is maintained. 【Features】 ■ Circular blade traveling type ■ Dust suction device at the end of the cutter's travel ■ Automatic positioning based on the length of the material feed ■ The movement of the cutter head in the line direction is performed by a servo motor and lead screw *For more details, please download the PDF or feel free to contact us.

• Other processing machines

The "PH-250 model" is an automatic packaging machine that allows for the setting of a wide variety of molded products with the shortest possible changeover time, enabling small bag packaging. By setting the product dimensions of "height, width, and length" on the LCD screen at six designated points, the machine automatically moves and completes the setup in a matter of seconds. You can then start the packaging process. 【Main Specifications】 ■ Product Size (Rectangular) - Maximum: 250mm (Height) × 250mm (Width) - Minimum: 80mm (Height) × 100mm (Width) ■ Product Size (Round) - Maximum: φ250mm - Minimum: φ100mm ■ Product Stacking Height: 50–400mm ■ Packaging Film (Raw Material): Double-fold roll maximum 600mm (Width) × φ250mm (Roll Diameter) ■ Processing Capacity (Maximum): 5 seconds/1 unit *For more details, please download the PDF or feel free to contact us.

• Bag making machine/slitter

The "FP-835/1045 model" is a vacuum pressure forming machine that enables high-speed operation of molds through a toggle arm drive system. The operation and control panel are all integrated within the machine, achieving significant space savings. Additionally, it allows for the reduction of setup time through memory playback of heater settings, timer settings, and more. 【Standard Specifications】 ■ Forming Area (MAX) ・FP-835 model: 800mm(W) × 900(F) ・FP-1045 model: 1000mm(W) × 1100(F) ■ Forming Pressure ・FP-835 model: 35 tons ・FP-1045 model: 45 tons ■ Forming Method: Heater line directional movement, center forming method ■ Mold Up/Down Drive: Servo motor and toggle arm drive system *For more details, please download the PDF or feel free to contact us.

• Vacuum forming machine

The "WFS-800/1000 model" is a vacuum forming machine that maintains stable precision over long periods of use due to the adoption of a center forming method, which prevents uneven load on the mold's upper and lower mechanisms. The mold's upper and lower mechanisms are driven by a servo motor and ball screw, with both the stopping position and speed managed numerically. Once set, the conditions are reliably stored and can be reproduced. Additionally, the center forming method and mold positioning device ensure good reproducibility and ease of mold exchange. 【Features】 ■ Thorough energy saving and emphasis on thermal efficiency ■ High-precision forming structure ■ Significant reduction in changeover time ■ Space-saving type ■ Control panel with touch panel LCD screen, etc. *For more details, please download the PDF or feel free to contact us.

• Vacuum forming machine

The "HPT-400S" is a super compact hot plate pressure forming machine suitable for small lots of various types, designed to save space. It features a heating plate on the top and a mold on the bottom, allowing for molding with a small stroke. The mold's vertical movement is driven by a servo motor and ball screw, enabling numerical management of speed and position. 【Features】 ■ Ideal for small lots of various types ■ Compact and space-saving ■ Compatible with various molds using a mold mounting frame (sold separately) ■ Molds can be easily pulled out offline ■ Mold replacement is extremely easy *For more details, please download the PDF or feel free to contact us.

• Other processing machines

The "FVS-500 model" is an ultra-compact vacuum forming machine developed for test molding using cut sheets. The up and down movement of the mold and the left and right movement of the sheet are driven by servo motors, allowing the heated sheet to quickly return to the molding zone, and the molding operation can also be performed at high speed. Additionally, the molding conditions such as the stopping position of the mold, movement speed, heater, and timer settings can be configured by entering values on a touch panel, and memory playback is also possible. 【Specifications】 ■ Molding area: Maximum 500mm (vertical) × 500mm (horizontal) ■ Molding product height: Maximum 130mm ■ Molding pressure: 5,000kg.f ■ Floor area: 1,950mm × 950mm × 2,100mm *For more details, please download the PDF or feel free to contact us.

• Vacuum forming machine

The "WU-800S/1000S model" is a transfer-type silicone coating device that draws silicone liquid from a tank using a plating roller and transfers it to two rubber rollers to apply it to the sheet surface. The application to the sheet surface can be done on either the front or back side of the sheet. The silicone liquid can be automatically replenished from the upper tank to compensate for any decrease in the liquid tank. 【Maximum Sheet Width】 ■ WU-800S: 900mm ■ WU-1000S: 1,100mm *For more details, please download the PDF or feel free to contact us.

• Other painting machines

The "HPS-1100 model" is a hot plate air pressure forming machine that adopts a new method for temperature management during molding stops, minimizing molding losses upon restart. Molding conditions, area settings for air holes, mold shut height, and other parameters can be automatically set through data memory playback. Additionally, both the control panel and operation panel are fully integrated into the machine body, and the large-capacity air piping is also modularized and built into the machine body, resulting in a space-saving design. 【Features】 ■ Stability of hot plate temperature management ■ Reduction of setup time ■ Space-saving ■ Clean appearance *For more details, please download the PDF or feel free to contact us.

• Other processing machines

The "WSD-800 model / WSD-1000 model" is a double winding shaft type scrap winder with a maximum winding outer diameter of φ550mm. When the scrap is fully wound, it is often unable to provide pulling force on the scrap during the interval before the next winding start for setup changes, which can lead to misalignment of the punch. By using this product, when one winding shaft is full, the other shaft can continue to start winding, thereby eliminating the cause of misalignment. 【Main Specifications】 ■ Number of scrap winding shafts: 2 shafts ■ Maximum winding outer diameter: φ550mm ■ Winding shaft drive source: Air motor *For more details, please refer to the PDF document or feel free to contact us.

• Other machine tools

We would like to introduce the foreign matter removal and tubular packaging machine handled by Wakizaka Engineering, the 'DPS-1 type / PC-150 type'. This product separates stacked items one by one as the air nozzle moves, and applies cleaning air and static removal air to the gaps created during separation to remove foreign matter such as cuttings and human hair that may have mixed into the products. Additionally, it automatically packages the products that have completed foreign matter removal in tubular film and discharges them into a cardboard box. 【Standard Specifications (Partial)】 ■ Stacking length of products: 200–600mm ■ Stacking pitch of accumulated products: 1–6mm ■ Packaging film used: Tubular endless tube ■ Processing capacity: 10–20 seconds per unit, etc. *For more details, please refer to the PDF document or feel free to contact us.

• Other packaging machines

The "CRP-120 model" is an automatic packaging machine that can consistently perform curling, counting, dust removal, and packaging in a single line. Curling can be easily adjusted for products with different outer diameters using a special screw and a circumferential simultaneous movement adjustment method. Additionally, packaging can be done using tubular film, allowing for neat sealing at both ends. 【Features】 ■ Consistently performs curling, counting, dust removal, and packaging in a single line ■ Curling can be easily adjusted for products with different outer diameters ■ Dust removal cleaning air generated by the blower device included with the machine ■ No need to prepare a large-capacity compressor ■ Packaging can be done using tubular film, allowing for neat sealing at both ends *For more details, please refer to the PDF document or feel free to contact us.

• Other packaging machines

Automating the "packaging work," which has always required human labor in the final stage of the manufacturing line. This contributes to solving the "labor shortage," which is already a crisis and could become a significant issue in the near future. There is no need to build complicated programs from scratch; it is equipped with a teaching function that allows for easy programming, enabling control of movements between XYZ axes with six axes through simple program modifications, not just fixed movements. Unlike traditional "industrial robots," "collaborative robots" are highly safe, eliminating the need for cumbersome fences or walls in the workplace. Additionally, by adding area sensors, it is possible to further enhance safety within the operational range of the "collaborative robot." 【Features】 - Labor reduction - Flexibility - Record-keeping - Safety *For more details, please download the PDF or feel free to contact us.

• Other industrial robots

The "WP-1000A-10T(7T), WP-800A-7T model" is a punching device that boasts excellent operability for setup changes while meeting the needs of the times with its space-saving design. - Stabilization of product feeding and prevention of misalignment - High cycle capability - Improved operability and maintainability

• Other processing machines

【Features】 1. A reasonable packaging machine that operates semi-automatically ● This packaging machine allows for semi-automatic packaging, eliminating the need to manually insert various types of tubular packaging bags and seal them with a back sealer. ● Compared to fully automatic packaging machines, it can accommodate subtle packaging needs (such as "tightness") and, above all, is priced reasonably. 2. Reduced burden on operators and increased cycle efficiency ● A layout that allows operators to work comfortably (for example, while sitting) can be achieved. Depending on the skill level, it can also enable higher cycle efficiency than fully automatic packaging machines. 3. Space-saving and reduced material costs ● Compared to fully automatic packaging machines, it achieves even greater space savings. ● The packaging film uses a folded tubular raw material, contributing to the reduction of the raw material costs for packaging bags. *For more details, please download the PDF or feel free to contact us.

• Other packaging machines

The "DPP-H" is an eco-friendly dust removal packaging machine that reduces the consumption of compressed air through a dedicated dust removal blower and a uniquely developed V-shaped dust removal nozzle, allowing for dust removal at a minimal running cost. While performing static electricity removal from dust products, it automatically packages up to 50 items in the shortest time of 4 to 5 seconds. 【Features】 ■ Reduction of setup time - By setting the product's "height, width, and length" on an LCD screen, it enables the shortest setup time based on 7 types of automatic movement locations for a variety of molded products. *For more details, please download the PDF or contact us.

• Other packaging machines