日立Astemoアフターマーケットジャパン List of Products and Services

The PS-16000RP is a portable power source that uses lithium iron phosphate lithium-ion batteries, which have high safety among lithium-ion batteries. It is equipped with nine protection features (short circuit/reverse connection/over-discharge/over-current/reverse current/low voltage/high voltage/temperature/over-charge). When used as a jump starter, it detects the connection status of the cables and the condition of the vehicle battery, and if any abnormalities are found, it warns with an LED and buzzer before output. 【Features】 ■ Starting capability: Gasoline vehicles up to 4,000cc, Diesel vehicles up to 3,000cc ■ Lithium iron phosphate lithium-ion battery 16,000mAh ■ Equipped with nine protection features ■ Cycle life: Approximately 2,000 times ■ Dustproof and rainproof design (JIS: IP63 compliant) *For more details, please refer to the PDF materials or feel free to contact us.

• Secondary Cells/Batteries
• Other power sources

The "DML/DMS Series" is a multi-type battery terminal that meets the needs of those who want to "draw power directly from the battery" and "return the negative power directly to the battery." It allows for reliable wiring without the need to search for power sources. The main body is made of brass casting, and the vertical bolt section is M8 (all common specifications). Please feel free to consult us when you need assistance. 【Lineup】 ■ Large Pole (D Type Terminal) ・DML-1 (+ terminal) ・DML-2 (- terminal) ■ Small Pole (B Type Terminal) ・DMS-1 (+ terminal) ・DMS-2 (- terminal) *For more details, please refer to the PDF document or feel free to contact us.

• Other cable related products
• Wiring materials

Due to the current flowing through the battery terminals, which can be several dozen amperes and up to several hundred amperes at maximum, the terminals deteriorate surprisingly quickly. Additionally, there are cases where battery fluid leaks from the liquid outlet cap and severely corrodes the terminals. "Crimp-type" battery terminals are used by crimping directly onto the wire. "Bolt-type" terminals are installed using round terminals. Furthermore, the thickness of battery cables ranges from 14sq to 60sq, and terminals suitable for each thickness should be selected. 【How to Choose Battery Terminals】 ■ Size of the pole: There are B type (small pole) and D type (large pole) ■ Connection type with wiring ・Crimp type: Used by crimping directly onto the wire ・Bolt type: Installed using round terminals ■ Thickness of the wire: Ranges from 14sq to 60sq, and terminals suitable for each thickness should be selected *For more details, please refer to the PDF document or feel free to contact us.

• Other cable related products
• Wiring materials

This product is a plate-type specification busbar for trucks. It uses oxygen-free copper, which has minimal material changes due to temperature and possesses a conductivity of over 100% (IACS). The product itself has a certain thickness, allowing for safe use. Additionally, by using a soft material for the insulation and making the wire thinner, the cable has improved flexibility, enhancing installation workability. 【Features】 ■ To provide flexibility to the wire, a flexible material for the insulation is adopted (original specification). ■ To prevent surface oxidation, a tin plating treatment is applied to the surface of the oxygen-free copper. ■ Comes with a terminal cover - To prevent short circuits and electric shocks - To prevent corrosion of battery terminals *For more details, please refer to the PDF document or feel free to contact us.

• Wiring materials
• Other work tools

We would like to introduce our lightweight and compact crimping tools, 'D-19N/D-20N', which are designed to improve work efficiency in narrow engine compartments compared to conventional crimping tools. These tools can be used for crimping terminals of high-current electrical components such as audio systems, as well as for crimping battery terminals and round terminals. 【Specifications (partial)】 ■ Crimping range ・D-19N: 8mm² to 38mm² ・D-20N: 38mm² to 60mm² ■ Maximum torque: 29.4N·m ■ Weight ・D-19N: 0.35kg ・D-20N: 0.34kg *For more details, please refer to the PDF document or feel free to contact us.

• Other work tools
• Work tools

The "D-type" is a board-type battery terminal that is lead-free and compliant with the RoHS directive. It uses oxygen-free copper, which has minimal material changes due to temperature and possesses a conductivity (IACS) of over 100%. To prevent surface oxidation, the surface of the oxygen-free copper is treated with tin plating. Additionally, the slitless structure, which has no notches and increases the thickness of the material, enhances conductivity by securing volume. 【Features】 ■ Tin plating is applied to the surface of the oxygen-free copper to prevent oxidation. ■ The slitless structure without notches provides a larger contact area, resulting in good conductivity and making the material less prone to cracking. ■ The material is lead-free and compliant with the RoHS directive. ■ High quality and reliable, MADE IN JAPAN. *For more details, please refer to the PDF document or feel free to contact us.

• Wiring materials

The "B-1/B-2" is a grommet-type crimp wiring terminal developed specifically for automotive repair parts. During maintenance, the terminal connections can be easily detached and reattached, providing a reliable structure. The terminal material undergoes pre-forming, allowing for a clean finish to be easily achieved. Additionally, the gap at the joint of the grommet-type socket (female side) has been narrowed to increase the surface area. 【Features】 ■ The terminal cutting surface is treated with tin plating (glossy) for rust prevention. ■ The narrow gap at the joint improves the adhesion with grommet-type plugs. ■ Developed specifically for automotive repair parts. ■ High conductivity. ■ Attention to plating treatment. *For more details, please refer to the PDF document or feel free to contact us.

• Wiring materials
• Crimp Terminal

This catalog introduces terminal and crimping tools. It includes "Automotive B-type crimping wire terminals," "Board type jumpers," "Insulation sleeves," and "Cable accessories." The bullet-shaped crimping wire terminals "B-1/B-2" feature a reliable structure that allows for smooth attachment and detachment between terminals during maintenance. Please make use of this for product selection. [Contents (partial)] ■ Product features ■ Automotive B-type crimping wire terminals ■ Automotive F-type waterproof crimping wire terminals ■ Automotive D-type battery terminals / Battery terminal covers ■ Board type jumpers ■ Battery clips *For more details, please refer to the PDF document or feel free to contact us.

• Crimp Terminal
• Wiring materials
• Other cable related products

The "HDM-350" is a compact-sized full-featured scan tool aimed at one unit per person. It includes functions such as reading and erasing fault codes, data monitoring, aiming support, active tests, and customization. Users who join the Fault Diagnosis Support Center (for a fee) will receive information on maintenance procedures and inspection guidelines using this product. 【Features】 ■ Compatible with a wide range of vehicles ■ Various functions available ■ Extended warranty benefits ■ Fault Diagnosis Support Center ■ Wireless printing of diagnostic results with a Bluetooth-enabled printer ■ Made in Japan *For more details, please refer to the PDF document or feel free to contact us.

• Other inspection equipment and devices
• Other measurement, recording and measuring instruments

The "HCNV-SC Series" is a DC-DC converter designed for idling stop vehicles. It is recommended for the installation of system devices such as car navigation systems. With a signal conversion function, it can accommodate multiple signals required by system devices with just one unit. Additionally, there are two power supply systems available, which can be used for batteries and ACC, among others. 【Features】 ■ Compatible with idling stop vehicles - Operates stably even during fluctuations in battery voltage caused by engine stop/restart. ■ Uses a switching type - High conversion efficiency due to ON/OFF control with an IC (integrated circuit). - Conversion efficiency has been improved to 95% through circuit modifications (compared to our previous models [HCNV-F10S and HCNV-F05S]). *For more details, please refer to the PDF documentation or feel free to contact us.

• converter

The HCK-602FB is a battery checker compatible with automotive health diagnostics. It can diagnose batteries for charging control vehicles/idling stop vehicles and auxiliary batteries for hybrid vehicles. It calculates fluctuations in measurement values due to increased charge transfer resistance, achieving a more accurate deterioration diagnosis. Additionally, you can insert and print the store name and promotional coupons in the header (top) and footer (bottom) of the test report. 【Features】 ■ Compatible with various eco-car batteries ■ Double differential pulse method ■ Five-level judgment result display ■ Version upgrade support ■ Header/footer editing function *For more details, please refer to the PDF materials or feel free to contact us.

• Other inspection equipment and devices
• Other measurement, recording and measuring instruments

The "HDM-9000" is a master model scan tool that balances functionality and operability. It is equipped with diagnostic software for 8 domestic passenger car manufacturers, 4 truck manufacturers, and 7 imported car manufacturers, making it compatible with a wide range of vehicles. It also offers features for maintenance inspections, such as battery discharge current accumulation clear, EPB maintenance mode, ADAS vehicle aiming, and tire pressure sensor registration. 【Features】 ■ Compatible with a wide range of vehicles ■ Supports various inspection and maintenance tasks ■ Fault diagnosis support center ■ Wireless printing of diagnostic results with a Bluetooth-enabled printer ■ Made in Japan *For more details, please refer to the PDF document or feel free to contact us.

• Other inspection equipment and devices
• Other measurement, recording and measuring instruments

The "HDM-330/9000" is a Hitachi diagnostic tool that supports various on-site tasks. We offer the compact scan tool "HDM-330," which is equipped with features necessary for inspection and maintenance work, as well as the master model "HDM-9000," which balances functionality and operability for the new era. 【Specifications】 ■HDM-330 　・Main specifications: 2.8-inch LCD, button-operated, connects to vehicles via DLC cable 　・Supported tasks: Maintenance inspection work, maintenance proposal support ■HDM-9000 　・Main specifications: 5-inch LCD, button-operated, connects to vehicles via DLC cable 　・Supported tasks: Fault diagnosis, maintenance inspection work, maintenance proposal support *For more details, please download the PDF or feel free to contact us.

• Other inspection equipment and devices
• Other measurement, recording and measuring instruments

Our crimp terminals (Hero Electric products) are trusted and utilized by many automotive maintenance customers due to their high quality and cost performance. Please feel free to contact us if you have any inquiries. 【Main Products】 ■ Crimp terminals ■ Waterproof connectors ■ Battery terminals ■ Fuses *For more details, please download the PDF or contact us.

• Other Auto Parts
• Other work tools