エクセル List of Products and Services

We would like to introduce the best product of January made by Excel Corporation. The best product of January is the "Divided Tray." We received a custom order from a food-related company for a divided tray with 50 compartments, each measuring 30mm x 30mm x 30mm, and we made it to order. Typically, welding causes warping and deformation, so we carefully predicted the amount of deformation that would occur from welding and bent it in the opposite direction to prevent warping, resulting in a meticulously crafted item. We also have photos of other product examples on our website, so please take a look if you are interested. 【Features】 ■ The internal plates that divide the compartments are welded to the main body of the tray to prevent shifting during use. ■ A meticulously crafted item that was welded with care to avoid warping. *For more details, please refer to the PDF document or feel free to contact us.

• tray

We would like to introduce the best product of December made by Excel Corporation. The best product of December is the "Steel Staircase." It features a handrail attached to the stringer, and the treads are made of wood. While it is common to weld the handrail and stringer on-site during installation, this time we opted for bolted connections to make installation easier. Additionally, since it was a very large product, we proceeded with careful consideration on how to assemble it. We also have photos of other product examples on our company website, so please take a look if you are interested. [Features] - Bolted connections for easier installation - Designed with aesthetics and durability in mind *For more details, please refer to the PDF document or feel free to contact us.

• Steel

We would like to introduce the best product of November produced by Excel Corporation. The best product of November is the "Vertical 5m Signboard" for real estate agents. It features a central support made of a 100mm square pipe, surrounded by panels made of iron plates, with acrylic panels attached on all four sides. Inside, there are LED lights that illuminate the signboard. The lower part is made of galvanized steel plate, which is resistant to rust, ensuring durability. We also have photos of other product examples on our company website, so please take a look if you are interested. 【Features】 ■ The signboard is illuminated by LED lights inside. ■ Made with galvanized steel plate, which is resistant to rust for longevity. *For more details, please refer to the PDF materials or feel free to contact us.

• Steel

We would like to introduce the best product of November made by Excel Co., Ltd. The best product of November is the "Stainless Steel Bathroom Handrail." This handrail is designed to be installed in the corner of the bathroom, and with safety in mind, all corners are processed with R bends. Since it is not possible to bend everything as a single piece, the pipes are welded together and finished with a grinder, which requires skilled manual techniques, making this product a shining example of our technical capabilities. We also have photos of other product examples on our website, so if you are interested, please take a look. [Features] ■ All corners are processed with R bends for safety ■ Pipes are welded together and finished with a grinder ■ Multiple meetings were held to refine the technology, budget, and specifications *For more details, please refer to the PDF materials or feel free to contact us.

• stainless

We would like to introduce the best product of October made by Excel Corporation. The best product of October is the "L-shaped Stainless Steel FB Handrail." This handrail surrounds the piloti of a supermarket. Since it is used outdoors, the appearance of the welded parts can be quite noticeable, making this product a testament to the manufacturing company's technical skills. If the diagonal is off even slightly during welding, it is difficult to correct, so we finished it perfectly to ensure there is no distortion or misalignment. We also have photos of other product examples on our website, so please take a look if you are interested. 【Features】 ■ Large L-shape measuring 10m x 4m ■ Joint parts are secured with bolts ■ Joint parts are finished with 3mm x 3mm plates welded together *For more details, please refer to the PDF document or feel free to contact us.

• stainless

We would like to introduce the best product of October made by Excel Corporation. The best product of October is the "H-type with detergent pocket." Instead of the usual square shape with four corners, this product features rounded corners with an R40 design as per your request. While we typically have four corners, this one has seven, making it a unique shape that we have created for the first time. There was a request to temporarily set aside washed dishes in the upper left section, and after multiple discussions considering technology, budget, and specific requirements, we arrived at a satisfactory design. We also have photos of other product examples on our website, so please take a look if you are interested. [Features] ■ Rounded corners with an R40 design as requested ■ Uncommon shape with all detergent storage areas also rounded *For more details, please refer to the PDF document or feel free to contact us.

• stainless

We would like to introduce the best product of September made by Excel Corporation. The best product for September is the "Two-Layer Sink." Since there was a request to separate clean and dirty water while washing dishes, we opted for a two-layer sink. However, a standard two-layer sink can be costly, so to keep costs down, we divided the sink with a board in the middle. The middle board is usually 1mm thick, but since welding it at that thickness can cause warping, we made it 3mm thick to prevent warping and also considered the appearance. We focused on using cost-effective materials to ensure that washing dishes is easy, as per our customer's request. We also have photos of other product examples on our website, so please take a look if you are interested. 【Features】 ■ The drainage is positioned right at the top right corner of the sink's bottom surface. ■ A skirt board was added to ensure that the sink layers are not visible from the front, creating a neat appearance. ■ The angle used as a stop for the opening is oriented inward. *For more details, please refer to the PDF document or feel free to contact us.

• stainless

We would like to introduce the best product of September made by Excel Corporation. The best product of September is the "Framework of a Trailer House." It is a very large product measuring 5000×2400×2300. This is a repeat order, as you have ordered it before. The size and design were decided by the customer, and we manufactured it accordingly. Since it is a large frame, we had difficulty assembling it without misaligning the diagonals, but I believe we did a very good job. Other product case photos are also available on our website, so please take a look if you are interested. [Features] ■ A repeat order, as you have ordered it before ■ Assembling it without misaligning the diagonals was challenging due to the large frame * For more details, please refer to the PDF document or feel free to contact us.

• Steel

We would like to introduce the best product of August made by Excel Corporation. The best product of August is the "All Stainless Steel Sink Table with Drawers." We shaped it based on the image sketch provided by the customer. We designed it professionally to meet the request for a large workspace, a place to put pots under the IH heater, and a long towel rack in front of the sink. The drawers are equipped with slide rails for smooth operation, and the interior is designed with a double structure to hide welding marks, ensuring an aesthetically pleasing appearance. Other product examples are also available on our website, so please take a look if you are interested. 【Features】 ■ Drawers are equipped with slide rails for smooth operation. ■ The interior is designed with a double structure to hide welding marks. *For more details, please refer to the PDF materials or feel free to contact us.

• stainless

We would like to introduce the best product of July, manufactured by Excel Corporation. The best product of July is the "Stainless Steel Stacking Cart" for placing trays. We received a request to assemble it using pipe fittings, but due to the complex shape and lack of suitable fittings, we proposed welding instead. There are parts where a vertical column (leg) runs through and parts that are separated, making it difficult to achieve alignment and diagonals, but we carefully finished it while making fine adjustments, ensuring that the appearance, including small covers, was thoroughly checked for a clean and sturdy result. Other product case photos are also available on our website, so please take a look if you are interested. 【Features】 ■ Proposed welding due to the complex shape and lack of suitable fittings ■ Suggested manufacturing with the same diameter considering cost aspects ■ Processed to ensure a clean and sturdy finish *For more details, please refer to the PDF document or feel free to contact us.

• stainless

We would like to introduce the best product of July manufactured by Excel Corporation. The best product of July is the "Sink with Shelf." This unique design features a shelf that allows you to place cups and pots on the sink. We made various suggestions for processing to shape the product according to our customers' requests. The design has been completed in a natural modern style with a two-tone combination of brown that cannot be achieved with just the inorganic stainless steel. We also have photos of other product examples on our website, so please take a look if you are interested. 【Features】 ■ Proposals from various angles such as appearance, strength, and usability ■ Brown baked paint only on the stainless steel legs and skirt ■ A product unique to custom-made orders *For more details, please refer to the PDF materials or feel free to contact us.

• stainless

We would like to introduce the best product of June manufactured by Excel Corporation. The best product of June is the "Nokotsu Box" (bone storage box). We received a request from a customer regarding a bone storage room made of blocks, where the existing iron door was deteriorating, and they consulted us about replacing the entrance. After multiple meetings to discuss the drawings and installation methods, we made our proposal and brought it to fruition. Other product case photos are also available on our company website, so please take a look if you are interested. [Features] - Made of stainless steel - Resistant to rust *For more details, please refer to the PDF document or feel free to contact us.

• stainless

We would like to introduce the best product of June manufactured by Excel Corporation. The best product of June is the "Oil Barrier (Oil Catcher)" from a certain hotel. It is made of stainless steel with a 1.5mm 2B finish, and the dimensions are 700×1500×450. To ensure there is no distortion and to achieve strength, we minimized welding and used plate processing as much as possible. Due to the large size, it is common to weld and join pieces together since there are no standard sizes available. However, our company has the equipment to bend even large products, which is a unique strength of ours. We also have photos of other product examples on our website, so please take a look if you are interested. 【Features】 ■ Stainless steel with a 1.5mm 2B finish ■ Dimensions are 700×1500×450 ■ Equipment available to bend even large products *For more details, please refer to the PDF document or feel free to contact us.

• stainless

We would like to introduce the best product of May produced by Excel Corporation. The best product of May is the "frame and outer frame for salon signs." We created it to match an existing sign you provided. Since it is a triangular sign, it was challenging to process, but we were able to create it beautifully and accurately while carefully considering the angles and dimensions. Other product case photos are also available on our website, so please take a look if you are interested. 【Features】 ■ Reproduced the same way because the existing sign had become old ■ Created beautifully and accurately while carefully considering the angles and dimensions *For more details, please refer to the PDF materials or feel free to contact us.

• stainless

We would like to introduce the best product of April made by Excel Corporation. The best product of April is the "Stainless Steel Hood for Factories." We received an order for a very large hood to be used in a big factory. Its size is an astonishing 6500mm x 5000mm, which is dozens of times larger than a regular hood. It was manufactured in 8 sections and then welded together, with careful and meticulous attention to ensure that the dimensional tolerance between the main body and the base is within ±1mm. Other product case photos are also available on our website, so please take a look if you are interested. 【Features】 ■ Size: 6500mm x 5000mm ■ Manufactured in 8 sections ■ Carefully and meticulously made to ensure a dimensional tolerance of ±1mm between the body and the base ■ A very large hood with a strong presence *For more details, please refer to the PDF document or feel free to contact us.

• stainless

We would like to introduce the best product of March produced by Excel Corporation. The best product of March is the "Stainless Steel Under Sink." We propose a type of sink (under sink) that can be installed from below without processing the existing counter, allowing it to be used as is. To enhance the fit and appearance when installed, it is made in an oval shape that is 10mm larger than the opening dimensions of the existing counter. This time, we had a larger corner with an R95, but we carefully finished it while making fine adjustments to create a beautiful R shape. Other product case photos are also available on our website, so please take a look if you are interested. 【Features】 ■ We propose a type of sink (under sink) that is installed from below. ■ Made in an oval shape that is 10mm larger than the opening dimensions of the existing counter. * For more details, please refer to the PDF materials or feel free to contact us.

• stainless

We would like to introduce the best product of March manufactured by Excel Corporation. The best product for March is the "Commercial Sink with Overflow." Since there was a request to include a slatted shelf at the bottom, we proposed a height for the slatted shelf that would not interfere with the drainage trap and did not require an opening. The manufacturing process involved drilling holes to match the actual product dimensions for the overflow section, as there were no specific measurements provided, and adjusting the length to connect with the drainage trap during the installation process. We also have photos of other product examples on our website, so please take a look if you are interested. 【Features】 ■ The legs are round pipes, but the skirt board is square (flat). ■ Careful welding processing to eliminate gaps at the back joint. ■ Thoughtfully designed and meticulously manufactured. *For more details, please refer to the PDF document or feel free to contact us.

• stainless

We would like to introduce the best product of February manufactured by Excel Corporation. The best product of February is the all-stainless steel "sink with drawers." The drawers are equipped with slide rails for smooth operation, and the interior is designed to hide welding marks for a better appearance. There were requests for finishing on the countertop and sink area, so we used different materials for the countertop and sink, welded them together, and polished them to ensure the seams are indistinguishable. We also have photos of other product examples on our website, so please take a look if you are interested. 【Features】 ■ Drawers equipped with slide rails for smooth operation ■ Interior designed to hide welding marks for better appearance ■ Different materials for the countertop and sink welded and polished together *For more details, please refer to the PDF document or feel free to contact us.

• stainless

We would like to introduce the best product of February made by Excel Corporation. The best product of February is the "Ladder with Backrest." Ladders are mostly installed outdoors. Therefore, safety and ease of use are important. Generally, stainless steel, which is resistant to rust, is recommended, but it is also possible to use iron with hot-dip galvanizing or baked-on paint. At the customer's request, we processed it with a galvanized finish, and the platform at the top of the ladder uses expanded metal to enhance strength and anti-slip effect. Other product case photos are also available on our website, so please take a look if you are interested. [Features] - The platform at the top of the ladder uses expanded metal - Enhanced strength and anti-slip effect *For more details, please refer to the PDF materials or feel free to contact us.

• Steel

We would like to introduce the best product of January made by Excel Corporation. The best product of January is the café's "Round Signboard." We added a band (edge) to a round board, but it was challenging to weld it perfectly without creating a gap between the band and the round board. The signboard is attached to the support with two rods. When trying to attach the rods to the signboard, it seemed like the signboard might twist, so we carefully installed it while checking the position visually. Other product case photos are also available on our website, so please take a look if you are interested. [Features] ■ Perfectly welded to avoid gaps between the band and the round board ■ The signboard is attached to the support with two rods *For more details, please refer to the PDF document or feel free to contact us.

• Steel

We would like to introduce the best product of January produced by Excel Corporation. The best product of January is the "Brochure Stand." This is a repeat production of the exact same item made by our company several decades ago. The center is made of aluminum with perforations, and the surrounding area is finished with a brown baked paint on steel. We use the holes from the perforations to secure a bar that holds the brochures with screws, but it was challenging to process the U-shaped bar so that it aligns perfectly with the pitch of the perforated holes. We also have photos of other product examples on our company website, so please take a look if you are interested. [Features] ■ Sturdy and gives a sense of heaviness ■ Center made of aluminum perforations ■ Surrounding area made of steel with brown baked paint *For more details, please refer to the PDF document or feel free to contact us.

• stainless

This is this month's best product, the "trailer house frame." It is a very large product measuring 5000x2400x2300. It is a repeat item that you have ordered before.

• others

Do you have any of these concerns? - I’ve drawn the plans, but can it really be bent? - I’m not sure about the distortion and strength… - It’s a hassle to ask about everything… At "Excel," we offer a wide range of consultations and manufacturing services, from corporate production hardware and architectural hardware to detailed items for households. <Features> - Over 80,000 custom-made and small-lot production achievements. - We can also handle bending processing for 6-meter long materials. *We are currently offering free materials on the distortion and strength of the bending processing that we can perform.

• Processing Contract

Our company specializes in metal processing and the production and shaping of stainless steel products. We have responded to requests from a wide range of customers, including public facilities, commercial stores, factories, and residences, and have produced over 80,000 products in total. This time, we are proudly presenting a collection of case studies featuring stainless steel products we have created! Our products are utilized in various locations, from public facilities like train stations and schools to factories, restaurants, and nursing homes. We are here to respond to requests like "Can you make something like this?" Custom-made and small lot orders are available, starting from just one piece! We also accept repairs and remakes of products from other companies. [Contents Included] - Case Studies: "Handrails," "Sinks," "Lining and Countertops" - Material and Product Features *For more details, please download the PDF or contact us.

• Processing Contract

We would like to introduce the best product of June 2019, manufactured by Excel Corporation. This month's best product is the "Intercom Stand." We have secured stainless steel bent materials in the caulking area. This improves the appearance and makes internal wiring and installation easier to prevent accidents. The main body is made of stainless steel square pipes, with a 1.5MM stainless steel panel used for the middle section, fixed with pieces. We also have photos of other product examples on our company website, so please take a look if you are interested. 【Features】 ■ Secured stainless steel (vibration finish) bent materials in the caulking area ■ Improved appearance and designed to make internal wiring and installation easier to prevent accidents ■ Main body made of stainless steel square pipes *For more details, please refer to the PDF document or feel free to contact us.

• others

We would like to introduce the best product made by Excel Corporation in July 2019. This month's best product is a shelf made with a frame of 13mm square pipes, with bent pieces fitted into the middle shelf. During production, it was challenging as it was not level and wobbled when placed, but we were able to fit it successfully to the dimensions specified in the drawings. Wood is attached to the top, and exhibits are placed on top of it. Other product case photos are also available on our website, so please take a look if you are interested. *For more details, please refer to the PDF materials or feel free to contact us.

• others

We would like to introduce the best product of February 2020, created by Excel Corporation. This month's best product is the "Wife Ornament of the Six Mon Coins," which is the family crest of the Sanada clan. This ornament is made from 1.6mm Bonde steel plate. Bonde steel plate is a type of iron plate that has been treated on the surface to make it somewhat resistant to rust. The part with the Six Mon Coins and the lower plate are made separately and then combined through welding, carefully adjusted to ensure the bolts fit properly during production. We also have photos of other product examples on our company website, so please take a look if you are interested. *For more details, please refer to the PDF materials or feel free to contact us.

• others

We would like to introduce the best product from Excel Corporation made in March 2020. This month's best product features a sink body and soap dish that are welded to ensure they are flush with each other, preventing distortion during the welding and finishing process. Due to the rounded corners, it is more challenging to finish than a standard sink, but we have creatively achieved a beautiful finish. We also have photos of other product examples on our website, so please take a look if you are interested. *For more details, please refer to the PDF document or feel free to contact us.

• others

We would like to introduce the best product from Excel Corporation made in April 2020. This month's best product is a sign located at the entrance of a parking lot for a recreational facility. To insert an acrylic panel between the base angle and the steel plate, we created it with a tolerance of within 1mm to ensure that the gaps are uniform for a proper fit, and finished it with rust prevention processing. We received compliments from our customers saying, "The precision is amazing! It fits perfectly. The quality is high!" This is a product we are proud of. We also have photos of other product examples on our company website, so please take a look if you are interested. *For more details, please refer to the PDF materials or feel free to contact us.

• others

This document is the June 2018 issue No. 000002 of the "Excel Newspaper" published by Excel Corporation. This time, we are introducing the "Complaint Reporting Meeting," which is held once a month. Our company considers complaints as "points for improvement in our operations" that we learn from our customers, and we hold a monthly reporting meeting to avoid repeating the same issues. [Contents] ■ We regularly hold complaint reporting and improvement meetings ■ June is the start of our fiscal year ■ Notice of employee trip *For more details, please refer to the PDF document or feel free to contact us.

• Processing Contract

This document is the May 2020 issue No. 000029 of the "Excel Newspaper" published by Excel Corporation. This time, we introduce a parking sign for entertainment facilities as the "Best Product of the Month," and we also cover our efforts in "Strengthening 5S." We hope you will take a moment to read it. [Contents] ■ A Bright Future ■ Best Product of the Month ■ Strengthening 5S *For more details, please refer to the PDF document or feel free to contact us.

• Processing Contract

We received a request from the customer for a sink that fits perfectly into the dead space of their kitchen, and we handled everything from design to production. The customer wanted to separate clean and dirty water while washing dishes, so we opted for a double sink. However, a standard double sink would be costly, so to keep costs down, we divided the sink with a board in the middle. The middle board is usually 1mm thick, but since welding it at that thickness would cause warping, we made it 3mm thick to prevent distortion and also considered its appearance. The customer also requested a flat bottom for easy dishwashing, so we positioned the drain as close as possible to the upper right corner of the sink's bottom surface. Using cost-effective materials, we prioritized making it easy for the customer to wash dishes as they requested. In terms of design, we added a skirt board to ensure that the sink layers are not visible from the front, creating a neat appearance. We received a kind message from the customer saying, "Thank you for accommodating my detailed requests. The installation is complete, and it fits just as I imagined. I appreciate the careful finishing of areas that I could only describe by feel."

• stainless

In the sink used in elementary schools, the inspection port has been designed to be positioned further back so that the toes can fit in. Since we were requested by the customer to manufacture within the budget, we proposed a design that fits within the budget based on the design drawings. Additionally, to prevent water from leaking from the lining countertop, we used stainless steel for the lining post form, and since the sink is deep and needs to be seamlessly connected with the back guard, we manufactured it as a single unit. Furthermore, considering the wall dimensions for installation, we allowed for clearance instead of making it a perfect fit, and since the inspection port is not likely to be used frequently, we implemented a mechanism that can be easily removed with a magnet. One of our strengths is that we can outsource drawings and have them properly designed, allowing us to manufacture accurately!

• stainless

This is a vertical 5-meter sign for a real estate agency, which is the best product for November. Although the photo is horizontal, it will actually be installed vertically. When it stands by the roadside, it may seem small at 5 meters, but when actually produced, it feels very large. There is a 100mm square pipe in the center as a support, and acrylic panels are attached in a panel-like manner on all four sides with iron plates. Inside, there are LED lights that illuminate the sign portion. For the lower part, we proposed using galvanized steel plates, which are less prone to rust, to ensure durability.

• others

We shaped the design based on the image sketch provided by the customer. We proposed and designed a spacious work area, placing pots and other items under the induction heater, and included a long towel rack in front of the sink as per your request.

• others

Since it will be used externally, the appearance of the welded parts will stand out, making it a product that tests the manufacturing company's technical skills. I was very happy when the customer came to see the finished product and said, "That's great!"

• others

I wanted to separate clean and dirty water when washing dishes, so I opted for a two-compartment sink. However, a standard two-compartment sink is costly, so to keep costs down, I divided the sink with a board in the middle. The middle board is usually 1mm thick, but since it would warp when welded at that thickness, I made it 3mm thick to prevent warping and also considered its appearance.

• Contract manufacturing

This is a repeat production of exactly the same item that our company made several decades ago. At that time, our company did not have CAD, and there were no design drawings left, so we recreated it by measuring the actual dimensions.

• others

Based on the image sketch provided by the customer, we created a design that aligns with their vision. We also equipped the drawers with slide rails for smooth operation, and ensured that the welding marks are not visible inside, paying attention to the overall appearance.

• others

Do you have any of these concerns? - I want to request production, but I can't prepare proper drawings... - I have an image in mind, but I can't express it well in words or writing... Our company specializes in metal processing and the production of stainless steel products. We have received requests from a wide range of customers, including public facilities, commercial stores, factories, and residences, and have produced over 80,000 products in total. Having handled many requests in the past, we are confident in our ability to address our customers' concerns! Even without drawings, we can produce based on simple sketches or photos. We will create products tailored to your needs and purposes while conducting hearings, so please feel free to consult with us first. 【Five things we value】 1. No need to be knowledgeable about hardware 2. Custom-made, small lots, from one piece 3. Repair and re-manufacturing of other companies' products 4. Reliable aftercare even from a distance 5. Fastest same-day order and shipment *For more details, please download the PDF or contact us.

• Processing Contract

Our company specializes in the fabrication and shaping of metal processing/stainless steel products. We have produced over 80,000 products in response to requests from a wide range of customers, including public facilities, commercial stores, factories, and residences. This time, we are proudly presenting a collection of case studies of stainless steel and iron products we have created! We have shaped items such as sinks, handrails, and frames to meet our customers' needs. We respond to requests like "Can you make something like this?" Custom-made, small lot production is available, starting from just one piece! We also accept repairs and remakes of products from other companies. Stainless Steel Custom Products: - Handrails - Sinks - Ladders and back baskets - Frames *For more details, please download the PDF or contact us.

• Processing Contract

Its size is an astonishing 6500mm × 5000mm, which is dozens of times larger than a regular hood!! Since it cannot be produced as a single piece, it was divided into 8 parts for manufacturing. The 8 pieces are welded together, and we carefully and meticulously ensured that the dimensional tolerance between the main body and the base is within ±1mm.

• others

Our company specializes in the production of architectural hardware and fittings such as handrails, sinks, ladders, gangways, and platforms. This document introduces our production examples that have improved workability and design, as well as key points for selecting companies to commission hardware production. If you are looking for a reliable partner for hardware manufacturing, who you can consult with confidence on everything from cost to design, please take a look. 【Contents】 ◎ Real-life examples of "partner selection" failures ◎ Key points for choosing a hardware company ◎ Four reasons why our company is chosen ◎ Production examples *This document can be viewed immediately via "PDF Download." Please feel free to contact us with any inquiries.

• Processing Contract

The "slope handrail" is literally a handrail attached to a slope to assist with walking up and down. It is something that needs to be firmly gripped when necessary, so it must be installed sturdily. Additionally, it is important not only to grip it but also to move while holding it, which makes the aspect of "sliding" significant. If you are a business or someone who has been given a drawing and is unsure of what to do, or if you are struggling with where to request assistance, please feel free to contact us. 【Points for Slope Handrails】 ■ Importance of design accuracy ■ A thickness of 34mm is generally recommended for handrails ■ If you often walk while holding on, a thickness of 38mm is recommended ■ For safety, the ends should be rounded ■ Outdoors, UV-resistant resin is recommended due to strong degradation from ultraviolet rays ■ Indoors, durable metals like stainless steel are recommended *For more details, please refer to the PDF or feel free to contact us.

• others

A "tarappu" refers to a "vertical ladder" used for moving between different heights. There are many accidents where individuals carrying items slip and fall, so to prevent falls from hitting the head and for safety measures, a back basket is attached. Strictly speaking, it cannot completely prevent falls, but it can prevent falling headfirst, significantly reducing the severity of injuries. If the height is not too great, having a back basket can prevent many accidents, so we recommend installing one. It can also be retrofitted to existing ladders, so please feel free to consult us. 【Points for Production】 ■ Tarappu is often installed outdoors, making safety and ease of use important. ■ Stainless steel, which is generally resistant to rust, is recommended. ■ In the case of buildings, it is often better for the appearance to blend in, so we can propose surface treatments of materials based on the actual appearance. *For more details, please refer to the PDF document or feel free to contact us.

• Contract manufacturing