ダイキン潤滑機設 List of Products and Services

The "LC2MP" is a controller for Rubies (single line). It performs multifunctional control via a microcontroller, allowing for timely and appropriate oil supply that matches the operating conditions of the main engine, ensuring safe usage. With a unique system control, it enables the supply of high-viscosity grease in low-temperature environments. Additionally, "Rubies" is a "single pipe advancing operation type" lubrication system composed of one pump, a distribution valve, and a branching single pipe. 【Specifications】 ■ Power supply: DC24V ■ Current value: 3.5A (max 6.5A) ■ Fuse capacity: 10A ■ Weight: 0.3kg ■ Operating temperature: -20 to +60℃ ■ Vibration durability: JISD1601 Class 3 (8.9G) ■ Protection rating: IP54 (not exposed to outdoor conditions) *For more details, please refer to the PDF document or feel free to contact us.

• others

The "FM" is a supply pump for Rubies (single line). It directly supplies grease from commercially available 16kg or 18kg pails into the manual pump "LBC6F" with a supply fitting and follower plate tank structure, and the electric pump "LE**F". Additionally, "Rubies" is a "single pipe progressive action" lubrication system consisting of one pump, a distribution valve, and a branched single pipe. The main piping can be done with a single pipe, allowing for an extremely simple piping plan. 【Specifications】 ■ Discharge volume (cm3/stroke): 9.0 ■ Discharge pressure (MPa): 4.4 ■ Operating temperature range (°C): -10 to +50 ■ Grease container used: JIS21620 16 or 18kg pail ■ Handle operating force (N): 147 ■ Weight (kg): 2.4 *For more details, please refer to the PDF document or feel free to contact us.

• others

The "LV" is a distribution valve for Rubies (single line). The connection method of the distribution valve includes the I-stage distribution valve method for a small number of oil supply points (up to 120) and the II-stage distribution valve method for a large number of oil supply points or when the supply points are dispersed. "Rubies" is a "single pipe progressive action" lubrication system composed of one pump, a distribution valve, and a branched single piping. Additionally, by installing a detection switch, blockages and damages in the main pipe (branch pipe) can be detected electrically. 【Features】 ■ The operation status can be visually confirmed with the operation indicator attached to the distribution valve. ■ Confirmation of the oil supply cycle is also possible. ■ Lightweight and compact due to its miniaturized design, making installation and handling easy. ■ Models with outlet numbers ranging from 2 to 12 are available in the lineup. *For more details, please refer to the PDF document or feel free to contact us.

• others

"LE" is a small variable pump for Rubies (single line). High consistency (NLGI No. 2) grease is usable. Grease replenishment uses a cartridge, preventing dirt contamination without getting your hands dirty. "Rubies" is a "single pipe progressive action" lubrication system composed of one pump and a distribution valve with a branched single piping. Additionally, due to the wide variety of pump and distribution valve types, diverse system planning can be easily assembled. [Features] ■ Extremely simple piping with only one line due to the single line system ■ Usable with NLGI consistency grades 0 to 2 grease ■ Grease replenishment is possible without a filling pump *For more details, please refer to the PDF materials or feel free to contact us.

• others

The "LBPR" is an electric drum pump suitable for applications such as shield machines, large conveyors, steelmaking machinery, and glass manufacturing. It supplies grease directly from commercially available 200kg drums (JIS standard products) and has a specification with less grease remaining compared to standard models. The follower plate is air-injected and separable, making it safe and easy to remove the drum. 【Features】 ■ Environmentally friendly and reduces waste ■ Easy separation of grease when disposing of used drums ■ Compatible in performance and installation with conventional drum pumps ■ Adjustable grease remaining amount (set to 8L at the time of shipment) ■ Four lineups (LBPR08, LBPR10, LBPR20, LBPR40) *For more details, please refer to the PDF document or feel free to contact us.

• others

The "AELBPR" is an electric drum pump that significantly reduces grease residue. With the adoption of a mechanical safety stopper, it safely and reliably prevents drops. The use of a lifting device (air-operated elevator) makes it easy to replace drums. Additionally, we offer a variety of options (integrated control panel, standard control panels EK-5 (T)/EA-5 (T), and a simple dust prevention cover). 【Features】 ■ Compatible in performance and installation with conventional drum pumps ■ Suitable for 200kg drums (JIS standard products) ■ Adjustable grease residue (set to 8L at the time of shipment) ■ Four lineup options (AELBPR08, AELBPR10, AELBPR20, AELBPR40) *For more details, please refer to the PDF document or feel free to contact us.

• others

The "LBP" is a drum-mounted oil pump that uses a high-efficiency geared motor. By adopting a piston valve system at the suction port, the sealing performance is enhanced, improving the suction capability for high-viscosity grease. It is also suitable for use in equipment that requires grease lubrication at multiple points, such as steelmaking and rolling machinery. We have models prepared for single-line and dual-line systems. 【Features】 ■ The motor is designed for outdoor use (equivalent to IP54) ■ The use of a lifter (optional) makes drum replacement easy ■ As a drum-mounted oil pump, no replenishment pump is required ■ Equipped with a follower plate for more effective use of grease ■ Suitable for equipment such as handling machinery, paper-making machinery, mining machinery, and cement industry machinery *For more details, please refer to the PDF document or feel free to contact us.

• others

The "BA Type Barrel Pump" is an electric automatic grease filling pump. We offer three products in our lineup: the single models "BA-2HN/BA-24HN" and the dual models "BA-2/BA-24," and "BA-2H/BA-24H." It can be started and stopped with a push button, or it will automatically stop when the high-level switch of the electric pump operates. 【Specifications (excerpt)】 ■ Motor: 0.4KW 4P 3φ E type AC200V ■ Pump rotation speed (min-1) - 50Hz: 60 - 60Hz: 72 - Reduction ratio: 1/25 (built-in) ■ Rotation direction: Left rotation ■ Lubricating oil used: Gear oil industrial type 2, 0.35L ■ Weight (kg): 53 *For more details, please refer to the PDF document or feel free to contact us.

• others

We would like to introduce our grease filling pumps, the "PF type/EFP type." The manual type "PF type" includes PF-1 and PF-3 models. The PF-1 model can be directly attached to a pail (16kg or 18kg). The PF-3 model allows you to store the pail directly inside the tank. The electric type "EFP type" significantly reduces the effort required for operation. It can easily transfer grease by simply placing it on a pail (16kg or 18kg) and connecting the power supply. 【Features】 <PF type> ■ The PF-1 model can also be used for filling large amounts of grease, such as in gear cases. <EFP type> ■ Equipped with a built-in timer for automatic stop at the desired time. ■ Significantly reduces the time required for work. *For more details, please refer to the PDF document or feel free to contact us.

• others

The "CU-LE-80" is a pump unit that integrates a grease pump for single-line systems and a control unit, making it easy to introduce automatic lubrication. The control for the single-line system is built into the LC2M type controller, achieving a compact control unit. The LC2M type controller can also be supplied as a standalone unit. With a case equivalent to protection structure IP54, this unit can be used outdoors and supports automatic lubrication for various machines. 【Features】 ■ A single-line pump unit with a pre-set control panel ■ Microcontroller-based single-line system control ■ Compact, high-performance pump ■ Unit with a case (protection structure equivalent to IP54) *For more details, please refer to the PDF document or feel free to contact us.

• Other pumps
• others

We would like to introduce the oil-air distribution valve 'MIX' handled by Daikin Lubrication Equipment. In steel mills, various methods such as grease lubrication, oil lubrication, forced lubrication, and micro-mist systems have been put into practical use as centralized lubrication systems. Efforts to minimize the environmental impact have become necessary, and among these, "oil-air lubrication," which allows a small amount of lubricant to be supplied directly to the bearings, is being adopted. Our company is pleased to propose the new "oil-air lubrication." 【Features of Oil-Air Lubrication】 ■ The lubricant supplied to the bearings is minimal. ■ The bearing area is constantly sealed with air, preventing foreign substances and cooling water from entering the bearings. ■ The discharged oil is collected in an oil receiver, maintaining a clean environment within the factory without contamination. ■ Since grease and lubricating oil do not mix with cooling water, processing becomes easier. *For more details, please refer to the PDF document or feel free to contact us.

• others
• valve

The single-line centralized lubrication systems handled by Daikin Lubrication Equipment come with compact pumps that can be driven by pneumatic or hydraulic power. These pumps operate a single plunger using pneumatic or hydraulic force to pump lubricant, making them compact and allowing for reliable lubrication through simple control by utilizing the main machine's power. They are suitable for lubricating medium to small machines and are used in combination with separate reservoirs. 【Features】 - By using the main machine's power, total power consumption is reduced, and the control method is simple. - The discharge volume per shot of the pump can be adjusted, allowing for the setting of an optimal lubrication amount. - Since the pump and reservoir are separate, they can be installed in suitable locations. *For more details, please refer to the PDF materials or feel free to contact us.

• Other pumps
• Separation device

We would like to introduce the distribution valves handled by Daikin Lubrication Equipment. There are seven types of distribution valve models: "MJN, M, MX, MJNO, MO, MXMO, MG," which consist of a supply body, an end body, an intermediate body (minimum 3, maximum 8), and gaskets. We offer various spool sizes that correspond to the required amount of lubrication (grease, oil) at the lubrication points, allowing for precise lubrication. 【Features】 ■ Progressive operation method ■ Only one pipe is needed ■ Installation of alarm indicators is possible ■ Built-in operating components make it robust and resistant to water and dust *For more details, please refer to the PDF materials or feel free to contact us.

• Lubricants
• others
• valve

『AKA.AKAC』 is a pump used in single-line systems. With a non-spring check valve and a single piston pump mechanism, it has a simple structure with fewer failure elements. The pump and control panel are integrated, allowing for easy automatic lubrication, and by setting it with a separate standard electrical control panel, enhanced automatic lubrication can also be achieved. 【Features】 ■ Reduced motor capacity due to increased efficiency ■ Simple pump mechanism ■ Inexpensive automatic lubrication *For more details, please refer to the PDF materials or feel free to contact us.

• Other pumps

The "KM" is a pump suitable for locations with relatively infrequent refueling, characterized by short piping and a limited number of refueling points, due to its compact size and ease of use. It is small and easy to handle, with light handle operation, making it convenient to use. Designed with a simple structure, it has a mechanism that is less prone to failure, resulting in minimal maintenance effort. Additionally, the high-pressure pump allows for narrower piping, enabling refueling over a wide area, which reduces piping costs and enhances the reliability of refueling. 【Features】 ■ Simplification of pipelines ■ Easy handling and operation ■ Robust and simple structure *For more details, please refer to the PDF document or feel free to contact us.

• Other pumps

This document introduces the dual-line centralized lubrication system. Centralized lubrication systems that cater to large production equipment as well as medium and small industrial machinery. Additionally, we offer a wide range of specialized lubrication devices. Daikin proposes suitable lubrication systems that ensure efficient and reliable oil supply tailored to various machinery and equipment. [Contents] ■ Product Applications ■ What is a Dual-Line Centralized Lubrication System? ■ Classification and Structure of the System ■ Manual End System ■ Electric Lance System *For more details, please refer to the PDF document or feel free to contact us.

• Other pumps

The "FB Type Manual Grease Pump" is a lightweight 21MPa high-pressure manual pump that is easy to operate with a handle. Due to its compact size and ease of use, it is suitable for lubrication in areas with relatively low lubrication frequency, short piping, and fewer lubrication points. Furthermore, using a high-pressure manual pump with a discharge pressure of 21MPa increases the reliability of lubrication and simplifies the piping. 【Features】 ■ Simplification of piping ■ Improved reliability of lubrication ■ Easy handling and operation ■ Robust and simple structure *For more details, please refer to the PDF document or feel free to contact us.

• Other pumps

The "UE Type Electric Grease Pump" is a compact series designed for cost-effectiveness. This electric grease pump is used in dual-line systems and adopts a single piston pump mechanism driven by a geared motor. It provides a simple and efficient automatic lubrication system. 【Features】 ■ Motor output reduced to 1/2 of conventional models (compared to our products) ■ Simple pump mechanism ■ Capable of handling a wide range of applications ■ Inexpensive automatic lubrication *For more details, please refer to the PDF document or feel free to contact us.

• Other pumps

The "U-shaped Electric Grease Pump" can automatically supply grease over a wide area under high pressure. It is a pump used in dual-line systems, addressing the trend towards larger and faster machinery, and contributing to the rationalization of equipment. The high pressure allows for a reduction in pipe diameter, which can lower piping costs. 【Features】 ■ Simplification of pipelines ■ Compact design ■ Improved reliability of lubrication ■ Wide range of lubrication ■ Inexpensive automatic lubrication *For more details, please refer to the PDF document or feel free to contact us.

• Other pumps

The "PV type pressure control valve" is a product that is installed at the end of the supply main of an electric end-type system to control the pressure of the supply main. Along with control, it sends a switching signal to the electrical control panel to switch the electromagnetic switching valve. It can accurately control the system pressure. 【Features】 ■ Maintains the pressure necessary for all distribution valves to complete their operation and sends a signal to switch the supply main accurately. ■ Allows for easy adjustment of the set pressure from the outside. *For more details, please refer to the PDF materials or feel free to contact us.

• Other pumps

The "DV type distribution valve" is used in dual-line systems and accurately supplies lubricant to each lubrication point under the pressure of the lubricant alternately pumped from the supply main. The operation of the distribution valve can be confirmed by an indicator, and the oil quantity can be adjusted arbitrarily using an adjustment screw. 【Features】 ■ Accurate lubrication - The sliding parts are finished with high precision, allowing for accurate metered lubrication. ■ Robust and excellent durability ■ Maximum operating pressure of 21 MPa - The high-pressure specification increases the reliability of lubrication and allows for a wider range of lubrication. ■ Lubrication quantity adjustment and operation inspection can be performed for each outlet. *For more details, please refer to the PDF document or feel free to contact us.

• Other pumps

The "DW type distribution valve" is a distribution valve used in dual-line systems, which can be configured from a single discharge type (1 port/1 element) to a double discharge type (2 ports/1 element), effectively doubling the number of ports and saving space. The number of distribution valves required is halved compared to conventional systems, simplifying installation and piping. 【Features】 ■ Doubled number of discharge ports ■ Easy conversion to odd-numbered ports ■ Maximum operating pressure of 21 MPa ■ Same installation dimensions ■ Robust and excellent durability *For more details, please refer to the PDF materials or feel free to contact us.

• Other pumps

The "GW Type Distribution Valve" provides a small-scale, cost-effective centralized lubrication oil system. By connecting various lubrication pumps (grease guns, hand pumps, small air-driven pumps) to the grease nipple (R1/8 button head type), it allows for precise metered lubrication to each lubrication point. By installing this distribution valve according to the number of lubrication points on the machinery to be lubricated and performing regular lubrication, it enables the delivery of the appropriate amount of lubrication in a short time. 【Features】 ■ Suitable for small-scale centralized lubrication ■ Guarantees accurate lubrication amounts ■ Robust and excellent durability ■ Easy to increase or decrease lubrication points *For more details, please refer to the PDF materials or feel free to contact us.

• Other pumps

The "LV-100 type distribution valve" operates in a fully progressive manner, supplying lubricant so that the pistons operate sequentially, automatically distributing a precise amount to each outlet. By increasing the maximum operating pressure to 21MPa, a check valve for preventing reverse operation is built into the outlet. By adopting a parent-child system in combination with DV and DW type distribution valves, centralized management of lubrication points can be achieved. 【Features】 ■ Maximum operating pressure: 21MPa ■ Fully progressive operation ■ Reliable lubrication ■ Centralized management of lubrication points is possible *For more details, please refer to the PDF document or feel free to contact us.

• Other pumps

The "DX Type Distribution Valve" is an electric pump for dual line systems that can handle ultra-high pressure up to 40MPa and allows switching between single and double discharge. With a precisely finished piston and a robust body, it can be used at ultra-high pressures of up to 40MPa, enabling a wider range of lubrication. Additionally, there are fewer constraints regarding environmental temperature and the grease used. 【Features】 ■ Maximum operating pressure: 40MPa ■ Excellent heat resistance ■ Ability to switch between single and double discharge ■ Using the plug hole on the front as the upper discharge port makes it easier to confirm the operation of the indicator rod *For more details, please refer to the PDF document or feel free to contact us.

• Other pumps

The "Dual-Line Centralized Lubrication System" is a lubrication system suitable for equipment and machinery with approximately 50 to 2000 lubrication points, consisting of one pump, multiple distribution valves, and two pipes. ★ Maximum number of lubrication points: 2000, allowable pipe length: 150m! The amount of lubrication for each bearing can be adjusted arbitrarily, allowing for extremely precise lubrication quantities. 【Features】 ■ Arbitrary selection of lubrication quantity ■ Reliable and accurate distribution ■ Guaranteed system operation ■ Simple and wider piping *For more details, please download the PDF or feel free to contact us.

• Lubricants

The "Dual-Line Centralized Lubrication System" is a lubrication system suitable for equipment and machinery with approximately 50 to 2000 points, consisting of one pump, multiple distribution valves, and two pipes. The oil supply amount for each bearing can be adjusted arbitrarily, allowing for extremely precise oil quantities. 【Features】 ■ Arbitrary selection of oil supply amount ■ Reliable quantitative distribution ■ Guaranteed system operation ■ Simple and wider piping *For more details, please download the PDF or feel free to contact us.

• Lubricants