名東化製 List of Products and Services

This is an introduction to the sample testing method recommended by BioFuture for the microbial agent "BFL4400AN." Dissolve 10g of the product in 100ml of water, shake the container well for 5 minutes, and let it sit for 30 minutes before taking 5ml from the supernatant. Assuming no sludge is brought in from other methane fermentation plants, add 2L of surplus sludge available at your own location into a container, and then add the supernatant using two different methods. For comparison, a control with 5ml of water will be used. The reason for considering two different methods of addition is that while adding a large amount at once can accelerate processes like hydrolysis, it may also lead to a rapid decrease in pH, which could halt methane production. BioFuture recommends a method of adding the microbial agent in portions. *For more details, please refer to the PDF document or feel free to contact us.*

• others

A public sewage treatment plant in France accepts wastewater from households and breweries. The problem was that anaerobic digestion was not functioning efficiently, and the gas production was insufficient. The first phase of the research evaluated how much the anaerobic digestion could be improved using 'BFL4400AN' at the laboratory level before applying it to the actual system. As a result, a significant reduction in COD was achieved. The generation of biogas increased significantly, not only allowing for the acquisition of more energy but also improving the facility's profitability. [Case Summary] - Industry: Public sewage treatment plant receiving wastewater from breweries and households - Location: France - Issues: Poor biogas generation and unsatisfactory improvement in COD - Product used: Microbial agent BFL4400AN *For more details, please refer to the PDF document or feel free to contact us.*

• others

The factory in question manufactures fried potatoes (French fries) and many food-grade potato flakes, and the wastewater treatment facility combines anaerobic and aerobic processes. The primary objective was to improve the COD values of the treatment facility, and the secondary objective was to increase the amount of biogas produced. Biofuture Ireland developed a microbial agent called 'BFL4400AN' for the anaerobic treatment facility. After three months, the COD values improved from 0.34m3/kg COD removed to 0.72m3/kg COD removed, achieving a 112% improvement. 【Case Summary】 ■ Industry: Potato processing plant ■ Location: France ■ Issues: Poor biogas generation and unsatisfactory COD improvement ■ Product Used: Microbial agent BFL4400AN *For more details, please refer to the PDF document or feel free to contact us.

• others

"BFL4400AN" is a microbial agent that can efficiently convert a wide range of organic matter into simple organic acids using a blend of carefully selected natural microorganisms. The microorganisms in this product operate in a facultative state, growing rapidly and forming a dominant biomass. Although this product does not contain methanogenic bacteria, it can prepare the process just before methane fermentation and increase gas production by 50%. 【Features】 ■ A blend of carefully selected natural microorganisms ■ Functions harmoniously with existing biomass ■ Improves the methane fermentation process in an environmentally friendly manner ■ Can increase gas production by 50% ■ Produced and formulated under strict product and lot management *For more details, please refer to the PDF materials or feel free to contact us.

• others

"BFL5800NT" is a specially formulated product that contains microorganisms of the Nitrosomonas species. It includes microorganisms that begin to break down ammonia immediately upon addition, and these microorganisms coexist with existing biomass to improve overall efficiency, allowing the plant to recover rapidly. Additionally, it is resistant to chemicals in water and can operate even at water temperatures in the low 10s Celsius. Many of our customers use it in their nitrification tanks. 【Features】 ■ Biological oxidation of ammonia in wastewater for removal from water ■ Capable of gas treatment ■ Microorganisms coexist with existing biomass to improve overall efficiency ■ Rapid recovery of the plant ■ Resistant to chemicals in water and can operate even at water temperatures in the low 10s Celsius *For more details, please refer to the PDF document or feel free to contact us.

• others

We would like to introduce products handled by Meito Chemical Co., Ltd. that can contribute to the recovery from the Great East Japan Earthquake. We propose "BFL Bio-Surfactant," which enables decontamination, separation, and purification by binding with metal ions (including radioactive substances), and the specialized water-absorbent resin "Water Works SP-400," which absorbs water containing radioactive substances from high to low levels. Please feel free to contact us when you need our services. [List of materials for the recovery from the Great East Japan Earthquake] ■ Microbial surfactant: BFL Bio-Surfactant ■ Water-absorbent resin for radioactive substances: Water Works SP-400 ■ Salt damage improvement agent: Fix ■ Salt damage improvement agent: Salt Rad *For more details, please refer to the PDF materials or feel free to contact us.

• Hazardous material processing

I would like to introduce one type of biosurfactant, "Rhamnolipid." It is produced through processes such as fermentation, centrifugation, sedimentation, extraction, and dilution, and can bind to positively charged metal ions in water (including radioactive substances) for separation. Production is carried out using the Pseudomonas genus, and stable commercial production is achieved. 【Features】 ■ Extremely efficient as a surfactant ■ Very low toxicity ■ High biodegradability ■ Very high emulsifying ability *For more details, please refer to the PDF document or feel free to contact us.

• Hazardous material processing

We would like to introduce the seaweed extract for plants from Ireland handled by Meito Chemical Co., Ltd. Seaweed has been used for soil improvement along the coast in Ireland for a long time. Ascophyllum nodosum extract has begun to attract attention in the horticultural field for its role in promoting plant growth and enhancing quality. Additionally, it is used as a raw material for alginate extracts, seaweed meal, fertilizers, body care products, and liquid seaweed extracts. 【Typical Analysis Values of Ascophyllum Nodosum】 ■ Protein: 5.7% ■ Fat: 2.6% ■ Fiber (Cellulose): 7.0% ■ Carbohydrates: 58.6% ■ Moisture: 10.7% ■ Inorganic Matter: 15.4% *For more details, please refer to the PDF document or feel free to contact us.

• Chemicals

We will introduce products used in environments where immediate effectiveness is required or where microorganisms cannot be used, as well as materials that enhance the effectiveness of microbial agents. In relation to oil, spilled substances need to be processed quickly. The oil-absorbing polymer "Aqua N-Cap" absorbs various types of oil, and the solidifying agent "Terra Cap" for petroleum and mineral oils solidifies oil on-site in a short time for easy removal. [List of environmental remediation materials other than microorganisms] ■ Oil-absorbing polymer Aqua N-Cap ■ Solidifying agent for petroleum and mineral oils Terra Cap ■ Purging agent Clear Purge ■ Phosphorus adsorbent Phoslock ■ Microbial control agent Biodex ■ Radioactive substance water-absorbing resin Water Works SP-400 *For more details, please refer to the PDF document or feel free to contact us.

• Hazardous material processing

We would like to introduce Meito Chemical Co., Ltd.'s technology for addressing environmental stress in plants. Some may be surprised to learn that plants also experience stress. There are various causes of stress, such as moisture, high temperatures, low temperatures, wind, snow, frost, transplantation, and transportation. Our polymers protect plants from these damages. Not only do they provide protection, but they also achieve more proactive benefits such as improved growth rates, increased sugar content, and reduced time until harvest. **Benefits of using our products:** - **Water-absorbing resin for horticulture: Water Works** - Prevents water depletion and shortages - Reduces watering costs by 75% - **Mycorrhizal fungi preparation: Bio Organics** - Coexists with roots to bring out the inherent power of plants *For more details, please refer to the PDF materials or feel free to contact us.*

• Chemicals

"BFL5900PH" is a microbial agent capable of decomposing wastewater containing VOCs (volatile organic compounds) such as benzene, as well as wastewater containing phenols, cresols, and aniline. It efficiently decomposes a wide range of monocyclic aromatic compounds through a blend of natural microbial groups. By treating VOCs without consuming large amounts of carbon dioxide, it also contributes to emission reduction. 【Applicable Systems】 ■ Activated sludge method ■ Batch activated sludge method ■ Pure oxygen system ■ Aerated lagoon ■ Bio tower ■ Gas scrubbers, bio scrubbers, and biofilters (for gas and vapor) *For more details, please refer to the PDF document or feel free to contact us.

• Hazardous material processing

"BFL5600SS" is a microbial agent for surfactants, blended from carefully selected natural microorganisms. It contains a wide variety of microorganisms and produces a diverse range of enzymes to efficiently break down many types of surfactants. It can decompose almost all existing types of surfactants. 【Applicable Systems】 ■ Activated Sludge Method ■ Aerated Lagoon ■ Batch Activated Sludge Method *For more details, please refer to the PDF materials or feel free to contact us.

• Hazardous material processing

The "BFL5500HC" is a microbial agent for petroleum that has the ability to decompose wastewater containing petroleum (hydrocarbon compounds) with extreme efficiency. Utilizing the inherent power of microorganisms found in the natural environment, it decomposes and purifies the petroleum components and hydrocarbon compounds in wastewater. It is effective for gasoline, kerosene, light oil, and heavy oil as well. 【Applicable Systems】 ■ Activated Sludge Method ■ Aerated Lagoon ■ Batch Activated Sludge Method ■ Bio Tower ■ Pure Oxygen System *For more details, please refer to the PDF materials or feel free to contact us.

• Hazardous material processing

"BFL5400GC" is a chemical industrial microbial agent that can decompose wastewater containing organic solvents, amines, aromatic compounds, and aliphatic compounds, as well as perform denitrification. It efficiently decomposes a wide range of organic compounds in wastewater with a carefully selected blend of natural microbial groups. Biological treatment is carried out through bioremediation. 【Available Systems】 ■ Activated Sludge Method ■ Batch Activated Sludge Method ■ Pure Oxygen System ■ Aerated Lagoon ■ Bio Tower *For more details, please refer to the PDF materials or feel free to contact us.

• Hazardous material processing

Our company provides technology, product sales, and consulting for the treatment of refractory organic substances using natural microorganisms (bioremediation). We are also capable of degrading solvents such as petroleum products, surfactants, aromatic compounds (such as benzene, toluene, xylene), ethylene glycol, dioxane, and acetone. Additionally, we can decompose lignin, starch, and cellulose to improve sedimentation properties. **Features of Bioremediation:** - Rapid growth - More efficient degradation - Superior aggregation effects - Resistant to shock - Prevents excessive foaming *For more details, please download the PDF or feel free to contact us.*

• Hazardous material processing
• Chemicals
• Other services