ワルタージャパン List of Products and Services

The "Xtra·tec XT" is Walter's latest general-purpose milling tool series that combines two essential requirements for cutting tools: a new level of efficiency and process reliability. With a wide range of cutter bodies for shoulder milling, face milling, high feed, and round inserts, it can accommodate a variety of applications, achieving high productivity and process reliability while enabling high-precision milling. <New Chip Seat Position Design> - Larger Cross-Sectional Area (+12%) The cross-sectional area around the chip clamping hole is enlarged, enhancing the rigidity of the chip itself. - Larger Contact Surface (+34%) A smaller chip clearance angle expands the contact surface of the chip seat, significantly improving stability. - Reinforced Chip Seat (+40%) The chip seat is strengthened by enlarging the back metal and securely fixing the chip with longer screws. 【Features】 ■ Maximum stability, high productivity ■ No additional finishing work required ■ General-purpose applications 【Main Lineup】 ■ Shoulder milling cutter ■ Octagon cutter ■ Face mill cutter ■ High feed cutter ■ Contour machining cutter, etc. *For more details, please download the PDF or contact us.

• Other cutting tools

The "Supreme MD340 & 344" are two new tools for iron-based workpieces. The "Supreme MD340" is developed for rough machining, full groove machining, or dynamic milling of iron-based workpieces. With a product range that includes 3, 4, or 5 cutting edges, it can be used universally. Additionally, the 4-edge tool "Supreme MD344" with a special tip geometry is designed for 90° sinking, ramping, or plunging operations, setting a new benchmark for sinking and pocket machining. 【Features】 ■ Walter's unique multi-layer coating of TiAlN and ZrN ■ Achieves the highest level of machining for iron-based workpieces ■ High cost-effectiveness and long tool life ■ Adjusted unequal twist and unequal pitch ■ Significant improvement in surface quality *For more details, please refer to the PDF document or feel free to contact us.

• End Mills

This catalog features the "thread cutting tools" that we handle. We introduce products such as "SUPREME TC610/TC611," which has high wear resistance, "SUPREME TC620," known for its low cutting resistance, and "T2710," which is suitable for short screw processing. Additionally, we provide a wealth of technical materials, including "cutting conditions for carbide thread cutting tools" and "application information." Please feel free to download and take a look. 【Contents (excerpt)】 ■ Product Highlight Page - Thread Cutting Tool Supreme TC610 / TC611 - Thread Cutting Tool Supreme TC620 - Thread Cutting Tool Supreme TC630 - Thread Cutting Tool T2710 - Thread Cutting Tool T2711 / T2712 / T2713 *For more details, please refer to the PDF document or feel free to contact us.

• cutter

This catalog introduces the "adapters" that we handle. It features a wide range of products including "lathe tool adapters," "rotary tool adapters," and "assembly parts and accessories - general adapters." The product range overview includes icons indicating processing applications, product images, applicable work materials, and for some tools, additional information such as shank types and clamping systems, allowing you to quickly find the products you need. Please feel free to download and take a look. [Contents (excerpt)] ■ Lathe Tool Adapters - Walter Capto clamping units - Walter Capto adapters - VDI adapters, monoblock - Machine-specific adapters, monoblock *For more details, please refer to the PDF document or feel free to contact us.

• Other machine elements

This catalog introduces the "milling tools" handled by our company. It features "carbide end mills," including shoulder milling cutters and arc-shaped end mills, as well as "indexable milling tools" such as positive and negative inserts. The new Walter comprehensive catalog is presented in a comprehensive and easy-to-understand electronic format, linked directly to the Walter online catalog, providing product and application information. We encourage you to take a look. [Contents] ■ Carbide End Mills - ConeFit Carbide End Mills - Brazed End Mills ■ Indexable Milling Tools - Milling Inserts - Indexable Cutters *For more details, please refer to the PDF document or feel free to contact us.

• End Mills
• cutter
• Other work tools

This catalog features "threading tools" handled by Walter. We introduce products such as "cutting taps," "forming taps," and "thread cutting cutters." The product range overview includes various information such as icons indicating processing applications, product images, and applicable work materials. Our company continuously improves its products and processes, ensuring high quality through effective measures and procedures, as well as conducting regular checks based on a comprehensive quality management system. Please feel free to download and take a look. 【Contents (excerpt)】 ■ Cutting Taps - HSS-E (-PM) Cutting Taps - Carbide Taps ■ Forming Taps - HSS-E (-PM)/Carbide Forming Taps *For more details, please refer to the PDF document or feel free to contact us.

• cutter
• Other cutting tools
• Other work tools

This catalog features the "drilling tools" that we handle at our company. We offer a wide range of "drilling tools," including point drill tips and carbide/HSS center drills, as well as "boring and precision boring tools" such as ISO cartridges, and "reaming tools." The product repertoire overview includes icons indicating processing applications, product images, applicable work materials, and for some tools, additional information such as shank types and clamping systems. Please feel free to download and take a look. [Contents (excerpt)] ■ Drilling Tools - Carbide Drilling Tools - Drilling/Chamfering Tools - Drilling Tips - Indexable Drilling Tools *For more details, please refer to the PDF document or feel free to contact us.

• Other work tools

This catalog introduces the "turning tools" that we handle. It features a wide range of "ISO turning tools," including negative chips and ceramic chips, as well as "grooving tools" and "threading tools." The new Walter comprehensive catalog is presented in an easy-to-understand electronic format that is directly linked to the Walter online catalog, providing comprehensive product and application information. Please feel free to download and take a look. [Contents (excerpt)] ■ISO Turning Tools - Chips - Walter Turn Turning Tools - External Diameter Machining - Walter Turn Turning Tools - Internal Diameter Machining *For more details, please refer to the PDF document or feel free to contact us.

• Other cutting tools
• Other work tools

The "UFL Series" is a high-tech drill with an ideal drill point shape that provides high reliability. It can reach the deepest part of holes without step processing in many applications. Additionally, it offers exceptional reliability due to good chip formation and reliable chip removal. 【Features】 ■ General-purpose tool ■ Higher productivity compared to common HSS tools (such as Type N) ■ Exceptional reliability due to good chip formation and reliable chip removal ■ High stability due to a large core cross-section ■ Clearly smaller feed resistance compared to common HSS tools (such as Type N) ■ Can reach the deepest part of holes without step processing in many applications *For more details, please refer to the PDF document or feel free to contact us.

• drill
• Other cutting tools

We would like to introduce our versatile drilling tool, the 'ADVANCE DC160'. It features polished flutes for reliable chip removal at 8×Dc or more. Additionally, it offers high productivity across various work materials, with extremely good positional accuracy thanks to the newly designed thinning section. 【Features】 ■ XD Technology: Processes deep holes up to 30×Dc without steps (pecking) ■ High productivity across various work materials ■ Extended double margin section quickly guides to the hole ■ Extremely good positional accuracy due to the newly designed thinning section ■ Versatile for general use *For more details, please refer to the PDF document or feel free to contact us.

• drill
• Other cutting tools

We have started the release of the "Xtra·tec XT Face Mill Cutter M5011." In addition to roughing chips, we offer wiper chips, making it suitable for both roughing and finishing operations. This can reduce process costs and the number of tools required. We offer two types of blade specifications in the diameter range of 50-160mm, with a maximum cutting depth of 8mm. 【Features】 ■ Good stability in various machining conditions ■ High process reliability due to double-sided negative chips and carbide shims ■ Extremely good handling due to easily accessible clamp screws (avoiding mounting errors) ■ Low cutting costs and high economic efficiency *For more details, please refer to the PDF document or feel free to contact us.

• cutter

We would like to introduce Walter's new products for 2022: "Turning, Drilling, Threading, and Milling Tools." We offer a rich lineup including "CBN Material WBH20C," which supports both interrupted and continuous cutting, and "Carbide End Mill ADVANCE MC268," which can shorten processing time due to its high chip removal rate. Our tools for aluminum processing deliver top-level results for various operations including milling, turning, drilling, and threading. 【Lineup (Excerpt)】 ■ ISO Turning Tools - Wiper Tip FW4/MW4 - Coolant Nozzle CN1000-M4-1 - CBN Material WBH20C ■ Grooving Tools - Walter Xpress Special End Face Grooving Tool G11XX *For more details, please refer to the PDF document or feel free to contact us.

• cutter
• End Mills
• Other cutting tools

"Xill・tec" is a carbide end mill that can be universally used for various work materials. It has a rich repertoire including corner R, edge chamfer, cylindrical shank, and Weldon shank. The high-performance material type "WK40TF" allows for a long tool life, reducing inventory costs. 【Features】 ■ Universally usable for various work materials ■ Reduces inventory costs ■ Rich repertoire ■ Long tool life due to high-performance material type WK40TF ■ Reconditioning (regrinding and recoating) possible *For more details, please refer to the PDF document or feel free to contact us.

• Other cutting tools

The "Tiger・tec Gold WPP10G / WPP20G / WPP30G" is a turning insert with excellent wear resistance for iron-based workpieces. It features a multi-stage surface treatment and a multi-layer MT-TiCN structure, providing excellent chip removal performance and versatility for a wide range of applications. Additionally, the dense crystalline structure of the coating contributes to its long tool life. 【Features】 ■ Unique coating technology ■ Dense fine columnar crystal MT-TiCN that improves wear resistance ■ Multi-layer MT-TiCN structure that enhances elasticity and toughness ■ Dense Al2O3 layer that improves resistance to crater wear ■ Multi-stage surface treatment that achieves low friction and high toughness *For more details, please refer to the PDF document or feel free to contact us.

• Other cutting tools

Turning, drilling, milling – Tiger·tec Gold meets high demands in various workpieces through a special coating process, thickness, layer structure, surface treatment, and chip breaker. Turning In turning, where the cutting edge continuously performs cutting, the chip material must have exceptional resistance to cutting heat. Tiger·tec Gold turning inserts utilize a dense fine columnar crystal TiCN+Al2O3 CVD coating that provides outstanding tool life due to its excellent heat resistance. Drilling In drilling with indexable tools, the peripheral and center cutting edges have different cutting speeds. A thin-film PVD coating achieves an optimal balance of wear resistance and toughness. Milling In milling, which involves repeated entry and exit into the workpiece, a special structure high-performance coating is required. For high-speed machining of iron and cast iron workpieces, a special ULP-CVD TiAlN coating delivers maximum efficiency. Another PVD Al2O3 coating balances cutting performance and heat resistance when machining stainless steel and difficult-to-cut materials.

• cutter
• byte
• drill

"Tiger・tec Gold" is a new technology that meets the high demands of users in cutting processes. A standout feature is the very high aluminum content, resulting in a highly stable and tough TiAlN layer. This layer is located just below the outermost TiN layer and protects the substrate from abrasive wear, thermal cracking, plastic deformation, and diffusion wear. The visually appealing gold outer layer allows for good wear detection and possesses extremely excellent friction properties. 【Features】 ■ Smooth cutting edge that achieves high friction properties ■ Robust cutting edge that ensures process reliability ■ Suitable wear detection on the cutting and relief surfaces ■ High cutting conditions and long tool life *For more details, please refer to the PDF document or feel free to contact us.

• Processing Contract
• Other metal materials

We offer contract machining services for groove cutting. We provide a handbook containing various information about groove cutting free of charge. The content covers a wide range of topics, including Walter's groove cutting tool systems, chip breakers, material types, machining methods, cutting conditions, machining examples, application information, and tips related to machining. Groove cutting, parting, and lateral turning – end face / outer diameter / inner diameter machining, various work materials, and different workpiece shapes can all be accommodated by Walter's groove cutting tools for various applications. [Contents (excerpt)] ■ Overview of groove cutting ■ Groove cutting and parting ■ Lateral turning ■ End face groove cutting *For more details, please refer to the PDF document or feel free to contact us.

• Processing Contract

This catalog introduces the highlights of new products handled by Walter Japan Co., Ltd. It includes turning tools, drilling tools, threading tools, milling tools, and adapters. Please make use of it for selecting products. Walter provides support for customers to find solutions to future challenges. Please trust Walter's Engineering Competence. [Contents] ■ Turning tools ■ Drilling & threading tools ■ Milling tools ■ Adapters * For more details, please refer to the PDF document or feel free to contact us. * If you would like a physical copy of the catalog, please inquire once.

• Other cutting tools

The "NRS chip breaker for heat-resistant alloys" is a turning tool that reduces heat generation during the machining of high heat-resistant alloys. We offer Walter NMS and NRS for heat-resistant alloys (e.g., Inconel 718) and Walter NFT/NMT/NRT for titanium alloys (e.g., Ti6Al4V). By reducing cutting resistance, it enables reliable machining of unstable components. 【Features】 - Reduced heat generation during the machining of high heat-resistant alloys - Lifespan of NMS/NRS chip breakers improved by up to 150% - NMS chip breaker: medium roughing / medium finishing - NRS chip breaker: roughing - Reliable machining of unstable components made possible by reducing cutting resistance *For more details, please refer to the related link page or feel free to contact us.

• Other cutting tools

"Ceramic - ISO S (difficult-to-cut materials)" is a turning tool that achieves a long tool life with excellent chemical resistance and optimized wear characteristics. With WIS10 and WWS20 ceramic inserts, cutting speeds 5 to 10 times higher can be achieved, allowing for reduced machining time. Processing of a wide range of different heat-resistant alloys with various treatments can be performed using ceramic and carbide inserts from a single manufacturer. 【Features】 ■ Achieves cutting speeds 5 to 10 times higher ■ Allows for reduced machining time ■ Excellent chemical resistance and optimized wear characteristics ensure a long tool life ■ Capable of processing a wide range of different heat-resistant alloys with various treatments *For more details, please refer to the related link page or feel free to contact us.

• Other cutting tools

The "HIPIMS WNN10 - ISO N" is a turning tool with extremely good adhesion of the coating, resulting in no peeling and uniform wear. It achieves a long tool life even with workpieces that have a high tendency to weld due to improved surface roughness. It possesses extremely good surface quality, dimensional accuracy, and high process reliability. 【Features】 ■ Extremely good surface quality and dimensional accuracy ■ High process reliability ■ No peeling and uniform wear due to extremely good adhesion of the coating ■ Achieves long tool life even with workpieces that have a high tendency to weld due to improved surface roughness *For more details, please refer to the related link page or feel free to contact us.

• Other cutting tools

"Tiger・tec Silver - ISO K (cast iron series)" is a turning tool that demonstrates high performance quickly and reliably. With Tiger・tec Silver technology and MK5, RK5, and RK7 chip breakers, it achieves maximum cutting speeds, thereby reducing machining time. It features a post-grinding treatment of the chip seat surface for interrupted cutting and cast surface machining, along with mechanical processing after coating, ensuring high process reliability. 【Features】 ■ Up to 75% extension of tool life, reducing tool costs ■ Reduction of machining time by achieving maximum cutting speeds ■ High process reliability through mechanical processing *For more details, please refer to the related link page or feel free to contact us.

• Other cutting tools

The "TFM5, MM5, RM5 Jet Guidance Chip Breaker 3" is a turning tool that achieves maximum cooling effect and tool life in ISO M (stainless steel). It features a cutting edge design that reduces notch wear and crater wear. The jet guidance chip breaker allows for improved chip management. It can be universally used with standard ISO turning holders or Walter precision coolant-compatible tools. 【Features】 ■ Excellent cooling for top-level productivity ■ Cutting edge design that reduces notch wear and crater wear ■ Improved chip management with the jet guidance chip breaker ■ PVD-Al2O3 heat-resistant shield coating for long tool life *For more details, please refer to the related link page or feel free to contact us.

• Other cutting tools

"Tiger・tec - ISO M/S (Stainless Steel)" is a cutting tool that uses PVD alumina (Al2O3) to prevent heat conduction to the base material. It offers excellent wear resistance and heat resistance for stainless steel machining and heat-resistant alloy machining. The sharp cutting edge reduces burrs on the workpiece and minimizes the wear of the cutting edge. Additionally, the newly developed Al2O3 PCD coating process minimizes thermal load, resulting in extremely high chip toughness. 【Features】 ■ Long tool life: Prevents heat conduction to the base material with PVD alumina (Al2O3) ■ Excellent wear resistance and heat resistance for stainless steel machining and heat-resistant alloy machining ■ Extremely high chip toughness due to minimized thermal load ■ Reduction of burrs on the workpiece and wear of the cutting edge due to sharp cutting edges *For more details, please refer to the related link page or feel free to contact us.

• Other cutting tools

"Walter FP4, MP4, RP4" is a turning tool that can achieve a 75% improvement in cutting performance with WPP10S, WPP20S, and WPP30S. The MP4 chip breaker realizes extremely good chip management even with difficult-to-manage materials such as SCr415 and structural steel. Tool information is directly laser-marked on the chip surface, making identification easy. 【Features】 ■ The MP4 chip breaker achieves extremely good chip management even with difficult-to-manage materials such as SCr415 and structural steel. ■ Tool information is directly laser-marked on the chip surface, making identification easy. ■ A 75% improvement in cutting performance with WPP10S, WPP20S, and WPP30S. *For more details, please refer to the related link page or feel free to contact us.

• Other cutting tools

"Tiger・tec Silver-ISO P (iron-based)" is a new generation of cutting inserts for iron, developed through a combination of new materials and new chip breakers. It features a silver escape surface with an indicator coating that makes wear detection easier. The number of various inserts used in processing has been reduced. It has achieved up to a 75% improvement in performance for turning steel materials. 【Features】 ■ Up to 75% performance improvement ■ Reduction in the number of various inserts used in processing ■ Improved processing reliability, especially enhanced safety on mass production lines ■ Enhanced process reliability in interrupted cutting ■ Silver escape surface with an indicator coating that facilitates wear detection *For more details, please refer to the related link page or feel free to contact us.

• Other cutting tools

The "Walter CAT-V" is a precision steep taper adapter that ensures accuracy from the spindle to the cutting edge. It boasts a rich repertoire of adapters and high stability due to its tapered shape. Additionally, it can be used for milling and drilling operations. 【Features】 ■ Precision steep taper adapter for CAT-V40 and CAT-V50 spindles ■ High stability due to tapered shape ■ High repeatability accuracy ■ Rich repertoire of adapters ■ Usable for milling and drilling operations *For more details, please refer to the related link page or feel free to contact us.

• Other electronic parts
• AC adapter

The "Walter AK182" is an arbor-integrated adapter that allows for rapid tool changes without the use of peripheral devices. It meets all the requirements for a powerful and precise adapter system. It particularly achieves good runout accuracy and chatter suppression in milling operations. With an adjustable stopper mechanism, precise length adjustment of the tool is possible during clamping. 【Features】 ■ Meets all the requirements for a powerful and precise adapter system ■ Up to 40% extension of tool life ■ Achieves good runout accuracy and chatter suppression, especially in milling operations ■ Enables rapid tool changes without the use of peripheral devices ■ Allows for precise length adjustment of the tool during clamping *For more details, please refer to the related link page or feel free to contact us.

• Other electronic parts
• AC adapter

The "A2110-P/A2111-P VDI" is a VDI turning blade adapter that directly supplies coolant to the turning blade. It supports both standard and overhead mounting with a single holder. There is no downtime for removing accumulated chips. Additionally, it operates without vibration due to a stable holder concept and can be used in various machining conditions. 【Features】 - Supports both standard and overhead mounting with a single holder - Directly cools the cutting edge with a coolant pressure of 10 bar, resulting in a long tool life and high productivity - No downtime for removing accumulated chips - No pressure loss due to O-ring seals that ensure reliable coolant supply - The cutting edge height can be easily adjusted within a range of +/-0.5mm, ensuring accurate centering *For more details, please refer to the related link page or feel free to contact us.

• Other electronic parts
• AC adapter

The "SK Arbor Integrated Adapter" boasts a minimum balance grade of G6.3 at 16,000 rpm. It ensures precision from the spindle to the cutting edge. Additionally, it allows for high runout accuracy and precise clamping. 【Features】 ■ Minimum balance grade G6.3 at 16,000 rpm ■ Coolant specification: Foam AD+B *For more details, please refer to the related link page or feel free to contact us.

• Other electronic parts
• AC adapter

The "HSK Arbor Integrated Adapter" fits perfectly and prevents eccentricity due to strict taper tolerances. High torque transmission is possible through friction contact generated by tightening within the adapter spindle. Additionally, two drive pins fit into the grooves at the end of the shank. 【Features】 ■ Up to 40% extension of tool life due to high runout accuracy and vibration damping effect, especially in milling operations. ■ Tool exchange possible in seconds without the use of peripheral equipment. ■ Clamping with precise tool length adjustment and adjustable stopper. *For more details, please refer to the related link page or feel free to contact us.

• Other electronic parts
• AC adapter

The "Walter Capto A2120-C/A2121-C" is an axial/radial adapter with a coolant transfer function that can reduce machine downtime. It enables reliable coolant supply with an O-ring seal that has no pressure loss. The good operability of the clamp wedge allows for quick tool changes. Additionally, the precise coolant contributes to extending the life of tools and inserts, as well as improving chip generation. 【Features】 ■ Ready to use upon installation, easy handling ■ Extends the life of tools and inserts and improves chip generation with precise coolant ■ Quick tool changes due to good operability of the clamp wedge ■ Reduces machine downtime ■ Reliable coolant supply with an O-ring seal that has no pressure loss *For more details, please refer to the related link page or feel free to contact us.

• Other electronic parts
• AC adapter

The "Walter Capto Clamping Unit" is a modular system that standardizes square shank holders and round shank holders for Japanese-made machines. When used, it allows for the modification of various common machines and turrets to the Capto system. We offer special holders according to customer requests. 【Features】 ■ Walter Capto holders for VDI30 - VDI60 ■ Standardization of square shank holders and round shank holders for Japanese-made machines ■ Special holders available according to customer requests *For more details, please refer to the related link page or feel free to contact us.

• Other electronic parts
• AC adapter

"Walter NCT" is an interface that allows you to clamp hard drills into hydro chucks or shell end mills onto arbors. Whether working with short or long protruding tools, this product enables you to easily configure milling or drilling tools according to specifications. Walter always provides suitable adapters. 【Features】 ■ A wide range of standard masters compatible with various machine spindles ■ Suitable for milling, drilling, and threading operations ■ High stability due to short taper and support surfaces ■ Easy to install *For more details, please refer to the related link page or feel free to contact us.

• Other electronic parts
• AC adapter

"ConeFit" is an adapter that leverages the diversity and high performance of the system to optimize the machining process. The proven interface of our product allows for the individual design of tools according to each machining case. With the appropriate head on the right adapter, it achieves optimal machining parameters for the application. 【Features】 ■ Flexible according to customer requirements ■ Different shank types depending on the machine spindle ■ High stability due to short taper, support surface, and self-centering mechanism ■ Easy to install and remove *For more details, please refer to the related link page or feel free to contact us.

• Other electronic parts
• AC adapter

"ScrewFit" is an adapter that achieves long tool life and good surface quality due to its high runout accuracy. By leveraging the system's diversity and high performance, it enables a speed-up of the machining process. It is characterized by being short and highly stable. The proven interface of our product can achieve machining speeds equivalent to those of integrated tools, while its modular structure allows for very flexible use. 【Features】 ■ Different base adapters according to the machine spindle ■ Short and highly stable ■ Long tool life and good surface quality due to high runout accuracy ■ High repeatability ■ Easy tool exchange within the machine *For more details, please refer to the related link page or feel free to contact us.

• Other electronic parts
• AC adapter

"Walter Capto" is not only a system with very high rigidity in the market but also a modular system that offers maximum modularity. The tapered polygon shape allows for perfect dissipation of both torsional and bending forces. As a result, this interface becomes the first choice not only for lathes but also for multi-tasking machines. 【Features】 ■ A perfect tool adapter system that can equip machines from a single source ■ Capable of providing extensions, reducers, collet chucks, tapping chucks, and shell end mill arbors ■ Supports various machining applications with a single system *For more details, please refer to the related link page or feel free to contact us.

• Other electronic parts
• AC adapter

This catalog is a digest version of the comprehensive catalog introducing cutting-edge cutting tools handled by Walter Japan Co., Ltd. It includes turning tools, drilling tools, threading tools, milling tools, and adapters. Our tools guarantee high flexibility, stability, and repeatable precision in chip replacement across various types of lathes. Please use this for selecting products. [Contents] ■ Turning Tools ■ Drilling & Threading Tools ■ Milling Tools ■ Adapters *For more details, please refer to the PDF document or feel free to contact us. *The downloadable PDF document is a digest version. If you would like the complete version, please contact us.

• Other cutting tools

The "T2711 / T2712" is a chip exchange type threading cutter that significantly reduces processing time by simultaneously machining screws with multiple blade rows. As a result, it achieves processing times comparable to cutting tap processing and rolling tap processing in many applications. Additionally, the spacing between cutting edges is an integer multiple of the screw pitch being processed, allowing multiple screw pitches to be machined with a single cutter body. 【Features】 ■ Double productivity: High-speed processing and long tool life reduce cost per hole ■ Double process reliability: Easy handling and diameter correction ■ Double quality: Extremely good screw quality due to smooth processing, with no chip residue left in the screw hole *For more details, please refer to the PDF document or feel free to contact us.

• Other cutting tools
• cutter

Our special short lead time production system 'Walter Xpress' allows for the integration of multiple processes into a single tool using custom-designed special tools. This system can reduce non-productive time in machining. Additionally, by integrating processes, the number of tool changes can also be reduced, allowing machines to operate continuously and improving productivity. Furthermore, we achieve extremely short lead times; after order placement and drawing approval, custom specification tools for this product are shipped from our factory within a manufacturing lead time of three weeks. [Features] ■ Integration of multiple processes into a single tool ■ Elimination of non-productive tool changes ■ Simplification of the entire machining process ■ Manufacturing lead time of three weeks *For more details, please refer to the PDF document or feel free to contact us.

• Other cutting tools

The ultra-hard end mill "SUPREME MD133" is a specialized tool designed to meet the special requirements of dynamic milling, such as small cutting width ae (depending on the work material), large cutting depth ap, and long cutting edge length Lc. Tool materials WJ30RD for ISO P (iron-based) and ISO K (cast iron-based, secondary applications), as well as tool materials WJ30RA for ISO M (stainless steel), ISO S (difficult-to-cut materials, secondary applications), and ISO N (non-ferrous metals, secondary applications) are available, making it suitable for a wide range of work materials. The diameter range is 6-12mm for 5-flute (z=5) and 16-20mm for 6-flute (z=6), with cutting edge lengths (Lc) of 3×Dc, 4×Dc (with neck), and 5×Dc. 【Features】 ■ High process reliability even in unmanned operation ■ High productivity due to reduced machining time ■ Maximizes the use of cutting length to promote even wear and achieve long tool life ■ High flexibility to accommodate various work shapes with a single tool diameter ■ Problem-solving tool: addresses difficult-to-cut materials and unstable machining conditions *For more details, please refer to the PDF document or feel free to contact us.

• Other cutting tools
• End Mills

This catalog features the drilling tools from Walter Japan Co., Ltd., specifically the 'DC170 Series'. It includes the internal coolant specification carbide drill "DC170 Series," as well as the internal coolant specification carbide pilot step drills "K3281TFT," "A6181TFT," and "A7191TFT." Please use this for selecting products. [Featured Products] ■ Internal coolant specification carbide drills ■ Internal coolant specification carbide pilot step drills *For more details, please refer to the PDF document or feel free to contact us.

• Other cutting tools

This catalog features milling processing products handled by Walter Japan Co., Ltd. It includes a lineup of products such as "high-feed cutters," "face mill cutters," and "shoulder milling cutters." Please use this for selecting products. 【Featured Products】 ■ Shoulder Milling Cutter "M4132" ■ High-Feed Cutter "M4002" ■ Face Mill Cutter "M4003" ■ Chamfer Cutter "M4574" ■ T-Slot Cutter "M4575" *For more details, please refer to the PDF document or feel free to contact us.

• Other cutting tools

This catalog features the chip exchange milling tools from Walter Japan Co., Ltd. Included in the lineup are "diamond-shaped, vertical chips," "wiper chips," "heptagonal negative chips," "shoulder milling cutters," and more. Please use this for selecting products. 【Featured Products】 ■ Diamond-shaped, vertical chips ■ Wiper chips ■ Heptagonal negative chips ■ Shoulder milling cutters ■ Porcupine cutters ■ Heptagon face mill cutters *For more details, please refer to the PDF document or feel free to contact us.

• Other cutting tools

This catalog features HSS drills handled by Warta Japan Co., Ltd. It includes a lineup of versatile "HSS drills" that can be used for various materials, as well as "HSS twist drills" and "HSS drill sets." Please use this for selecting products. [Featured Products] ■ HSS Drills ■ HSS Twist Drills ■ HSS Drill Sets *For more details, please refer to the PDF document or feel free to contact us.

• Other cutting tools