エンベック Product Lineup

The "WR-Z16 (WHITE RABBIT Z16)" is a standalone device equipped with 16 SFP connectors that provides sub-nanosecond accurate time over a plug-and-play fiber link. It offers highly accurate IEEE 1588 (PTP) across all optical interfaces and supports NTP interoperability. Frequency distribution at the picosecond level is available through a digital clock. 【Features】 ■ Equipped with 16 SFP connectors ■ Provides highly accurate IEEE 1588 (PTP) across all optical interfaces ■ Supports NTP interoperability ■ Frequency distribution at the picosecond level is available through a digital clock ■ Incorporates a failover mechanism to ensure continuous operation *For more details, please refer to the PDF document or feel free to contact us.

• Communications

The "SPEC" is an FMC carrier that can hold one FMC card and an SFP connector. By using various FMCs, it provides White Rabbit functionality for applications such as ADC, TDC, DDS, fine delay, and digital I/O. Additionally, the standard SPECv4 integrates a Spartan-6 FPGA, allowing for programming of FMC boards as a standard cost-optimized approach. 【Features】 ■ Can hold one FMC card and an SFP connector ■ Provides White Rabbit functionality for various applications ■ Capable of programming various FMC boards (SPECv4) ■ Incorporates LX100T FPGA (SPEC v4XL) *For more details, please refer to the PDF document or feel free to contact us.

• Communications

The "WR-ZEN TP (WHITE RABBIT ZEN TIME PROVIDER)" is a highly versatile standalone node that provides White Rabbit functionality for a wide range of applications utilizing redundant connections. By implementing standard timing protocols such as PTP, NTP, NMEA, IRIG-B, and ToD, it easily distributes time and frequency to other devices. It enhances synchronization accuracy by combining ultra-stable clocks with low jitter and temperature-compensated clock resources. 【Features】 ■ Provides White Rabbit functionality for a wide range of applications utilizing redundant connections ■ Easily distributes time and frequency to other devices ■ FMC card can be installed *For more details, please refer to the PDF document or feel free to contact us.

• Communications

"WR-LEN (WHITE RABBIT LEN)" is a competitive White Rabbit that serves as an alternative means to support Daisy Chain configurations. It enables a cost-effective solution for delivering PPS/10MHz signals or IRIG-B protocols to your devices. Additionally, it can be utilized as an OEM product to integrate precise timing synchronization into your existing products. 【Features】 ■ Enables cost-effective solutions ■ Available as an OEM product ■ Options available *For more details, please refer to the PDF document or feel free to contact us.

• Communications

"WRS (WHITE RABBIT SWITCH)" is a key component of White Rabbit Technology. It distributes time and frequency with sub-nanosecond precision to thousands of nodes through standard optical fiber. Using a redundant network topology, it provides deterministic delivery and highly reliable communication. 【Features】 ■ Distributes time and frequency to thousands of nodes with sub-nanosecond precision ■ Utilizes a redundant network topology ■ Provides deterministic delivery and highly reliable communication ■ Dynamically adjusts timing links ■ Used by highly demanding industrial and scientific facilities in over 14 countries *For more details, please refer to the PDF document or feel free to contact us.

• Routers, Switches, and Hubs

The "MARATON" is a high-density, low-noise, floating low-voltage power supply system designed for use in harsh magnetic/radiation environments. It is designed for the CERN (European Organization for Nuclear Research) LHC experiments and provides power to low-noise electronic devices with currents ranging from 10A to 600A over long distances. Additionally, the available input options are DC 385V, AC 230V, or 400V, and depending on the magnetic field, either air cooling or water cooling can be selected. 【Features】 ■ Supplies power to low-noise electronic devices with currents ranging from 10A to 600A over long distances ■ Available input options are DC 385V, AC 230V, or 400V ■ Can choose between air cooling or water cooling depending on the magnetic field ■ Various versions available for moderate to hazardous environments *For more details, please refer to the PDF document or feel free to contact us.

• power supply
• Switching Power Supply

The "MTCA.4 Power Supply" is a low-noise, low-ripple, high power density power supply with a double-wide, double-height (full-size) form factor. It is designed according to the PICMG MTCA.4 standard and provides 1000W for 12V payload power and 3.3V management power. Please feel free to contact us for inquiries. 【Features】 ■ Double-wide, double-height (full-size) form factor ■ Low noise, low ripple, high power density ■ Designed according to the PICMG MTCA.4 standard ■ Provides 1000W for 12V payload power and 3.3V management power *For more details, please refer to the PDF document or feel free to contact us.

• power supply
• Switching Power Supply

The PL516 is a high-performance, high-density programmable 16-channel system equipped with a fully redundant low-voltage power supply system. With remote monitoring and control capabilities, it allows for the verification of power consumption over long distances and the control of power supply to numerous external load channels. Voltage, current, temperature, and output power are programmed and controlled by an internal processor, which detects not only unauthorized modes but also faults. 【Features】 ■ Equipped with a fully redundant low-voltage power supply system ■ Remote monitoring and control capabilities allow for verification of power consumption over long distances and control of power supply to numerous external load channels ■ Detects not only unauthorized modes but also faults ■ Modular structure with two plug-in power boxes ■ Mountable in a 19-inch rack *For more details, please refer to the PDF document or feel free to contact us.

• power supply
• Switching Power Supply

We would like to introduce the 'MPOD Module' that we handle. The high-voltage module is available in a maximum voltage range of 500V to 10kV and can be used with up to 48 channels. The low-voltage module has 8 channels, capable of handling various voltage ranges from 0 to 8V up to a maximum of 120V, with each channel able to use up to 50W. Depending on the application, the MPOD can be configured as "low voltage only," "high voltage only," or "mixed configuration." Additionally, all channels can be controlled and monitored individually, and local control is possible using an optional LCD display. 【Features】 ■ The MPOD can be configured as "low voltage only," "high voltage only," or "mixed configuration." ■ All channels can be controlled and monitored individually. ■ Local control is possible using an optional LCD display. *For more details, please refer to the PDF document or feel free to contact us.

• power supply
• Switching Power Supply

NIM and CAMAC crates require a very clean and stable DC power supply with standard voltages of +24V/-24V, +12V/-12V, and +6V/-6V. As a result, CERN has defined compatible power supplies for both NIM and CAMAC specifications and CERN specifications. The power supplies can be used in both types of crates, and the CE version of the power supply unit is equipped with individual AC wiring to comply with CE/UL safety standards. WIENER provides high-precision, low-noise linear stabilized NIM and CAMAC power supplies with a maximum output of 650W DC, as well as low-noise switching power supplies controlled by a microprocessor. [Features] ■ The power supplies can be used in both types of crates. ■ The CE version of the power supply unit complies with CE/UL safety standards and is equipped with individual AC wiring. *For more details, please refer to the PDF document or feel free to contact us.

• power supply
• Switching Power Supply

The WIENER VPX power supply unit is a commercially available conduction-cooled converter compliant with the ANSI/VITA 62.0 specification. These can be used to power VPX chassis and are compatible with the standard enclosure defined in VITA 48.0. VPX is an ANSI standard defined by VITA, which adds switched fabric to VMEbus-based systems by incorporating the new multi-gig RT2 high-speed connector. It continues the mechanical form factor of 6U and 3U Eurocard sizes while partially maintaining the 32-bit parallel VME bus. 【Features】 ■ ANSI standard defined by VITA ■ Continues the mechanical form factor of 6U and 3U Eurocard sizes ■ Partially maintains the 32-bit parallel VME bus ■ Designed to provide robust and high-speed performance ■ Compatible with the standard enclosure defined in VITA 48.0 *For more details, please refer to the PDF document or feel free to contact us.

• power supply
• Switching Power Supply

Our company develops, designs, and sells various custom products utilizing EPS technology for Japanese users. We offer custom EPS solutions starting from one unit, including 3D design of enclosures, backplane design, power units, cooling units, and more. Please feel free to contact us with your requests. *For more details, please do not hesitate to reach out to us.*

• Contract manufacturing
• Other semiconductors