東邦工業 List of Products and Services

The "Cylinder Head Appearance Inspection Device" is an inspection device using a multi-joint robot. The inspection process consists of two stages. The multi-joint robot hand is equipped with a camera and lighting to perform image inspections on each surface. Additionally, it is composed of a conveyor section for transporting between the front and back processes and an image-based defect inspection system. The equipment dimensions are L4500mm × W3000mm × H2500mm. 【Features】 ■ Inspection device using a multi-joint robot ■ The multi-joint robot hand is equipped with a camera and lighting to conduct image inspections on each surface ■ Composed of a conveyor section for transporting between the front and back processes and an image-based defect inspection system ■ Cycle time: 0.83 minutes or less ■ Equipment dimensions: L4500mm × W3000mm × H2500mm *For more details, please refer to the PDF document or feel free to contact us.

• Other industrial robots
• Visual Inspection Equipment

The "Camshaft Cleaning Device" is a compact-sized cleaning machine. It features a single-tank system with heated cleaning using a heater. The cleaning pressure is 0.5 MPa or more, and the cleaning area covers the entire exterior of the camshaft. The operator sets three intake camshafts and three exhaust camshafts into the device, and the cleaning process, from washing to air blowing, is performed automatically. 【Features】 ■ Compact-sized cleaning machine ■ Single-tank system with heated cleaning using a heater ■ Cleaning pressure of 0.5 MPa or more, covering the entire exterior of the camshaft ■ Cycle time: 2.00 minutes or less ■ Equipment dimensions: L3500mm × W1500mm × H2000mm *For more details, please refer to the PDF document or feel free to contact us.

• Other industrial robots
• Other cleaning machines

The "Shaft Gear Cutting Line Transport Device" is equipment designed for lot production. The equipment dimensions are L15500mm × W9000mm × H3000mm. It consists of two overhead traveling robots that handle the loading and unloading of workpieces for the hob, NC lathe, shaving machine, and oil removal device. 【Features】 ■ Flexible line composed of processing machines and robots ■ Suitable for lot production ■ Composed of two overhead traveling robots ■ Handles the loading and unloading of workpieces for the hob, NC lathe, shaving machine, and oil removal device ■ Equipment dimensions: L15500mm × W9000mm × H3000mm *For more details, please refer to the PDF document or feel free to contact us.

• Other industrial robots
• Transport and handling robots
• Other conveying machines

The "Cylinder Head Intermediate Hole Diameter Measurement Device" is equipment that measures and determines the hole diameter of finished workpieces using an air gauge. The measurement head for hole diameter can accommodate finished holes ranging from φ3mm to 60mm. Additionally, it uses a multi-joint robot, and the tip can quickly change to switch gauge heads. 【Features】 ■ Access to six sides of the workpiece ■ Utilizes a multi-joint robot ■ Measurement head for hole diameter can accommodate finished holes from φ3mm to 60mm ■ Cycle time: 0.7 minutes or less per unit ■ Equipment dimensions: L5000mm × W2600mm × H2500mm *For more details, please refer to the PDF document or feel free to contact us.

• Other industrial robots
• Other measurement, recording and measuring instruments

This product is a fully automatic flexible head leak testing device that conducts leak tests for IN/EX valve supports, water-based, and oil-based systems. The cycle time is 0.55 minutes per unit or less. It can flexibly accommodate various productions through jig changeovers. Dedicated side and bottom jigs for each model can be changed within the cycle time. 【Features】 ■ Equipped with a jig storage shelf, allowing for automatic jig changeover within the equipment ■ Fully automatic leak testing for IN/EX valve supports, water-based, and oil-based systems ■ Flexible response to various productions through jig changeovers ■ Cycle time: 0.55 minutes per unit or less ■ Equipment dimensions: L3820mm × W3820mm × H5000mm *For more details, please refer to the PDF document or feel free to contact us.

• Other industrial robots
• Leak Testing Equipment

This product is a device for press-fitting valve seats into cylinder heads at room temperature. Instead of tilting the work side, the structure allows the press-fitting unit side to tilt at an angle for press-fitting. Additionally, it is flexible and capable of random production of more than four models at all times. It is composed of units for loading and unloading ST, oil application ST, press-fitting ST, and parts supply. 【Features】 ■ Structure allows the press-fitting unit side to tilt at an angle for press-fitting ■ Device for press-fitting valve seats into cylinder heads at room temperature ■ Flexible and capable of random production of more than four models at all times ■ Cycle time: 2.0 minutes or less ■ Equipment dimensions: L5600mm × W3000mm × H3000mm *For more details, please refer to the PDF document or feel free to contact us.

• Other industrial robots
• Assembly robot

We would like to introduce our "Cap Assembly Bolt Tightening Device." The equipment dimensions are L2900mm × W3330mm × H2200mm. It is designed to tighten bolts on cylinder heads. We use YAMAHA robots and Daiichi Dentsu N/R. Please feel free to contact us if you have any inquiries. 【Features】 ■ Equipment for tightening bolts on cylinder heads ■ Uses YAMAHA robots and Daiichi Dentsu N/R ■ Workpiece: Cylinder head (engine) ■ Cycle time: 1.0 minute ■ Equipment dimensions: L2900mm × W3330mm × H2200mm *For more details, please refer to the PDF document or feel free to contact us.

• Other industrial robots
• Assembly robot

The "Cap Assembly Bolt Insertion Device" is equipment for inserting bolts into the cylinder head. The equipment dimensions are L2900mm × W3700mm × H2200mm. Bolt insertion is performed using a SCARA robot. Please feel free to contact us when you need assistance. 【Features】 ■ Equipment for inserting bolts into the cylinder head ■ Bolt insertion using a SCARA robot ■ Workpiece: Cylinder head (engine) ■ Cycle time: 1.0 minute ■ Equipment dimensions: L2900mm × W3700mm × H2200mm *For more details, please refer to the PDF document or feel free to contact us.

• Other industrial robots
• Assembly robot

We would like to introduce our "Cap Assembly Device." This device is equipment for assembling caps onto cylinder heads. The equipment dimensions are L4550mm × W4300mm × H3000mm. It performs assembly using a 6-axis robot and a scara robot. Please feel free to contact us if you have any inquiries. 【Features】 ■ Equipment for assembling caps onto cylinder heads ■ Assembly using a 6-axis robot and a scara robot ■ Workpiece: Cylinder head (engine) ■ Cycle time: 1.0 minute ■ Equipment dimensions: L4550mm × W4300mm × H3000mm *For more details, please refer to the PDF document or feel free to contact us.

• Other industrial robots
• Assembly robot

The "Cap Assembly Marking Device" has equipment dimensions of L2800mm × W1400mm × H1900mm and is designed to mark the caps of cylinder heads. It uses a 3-axis robot and vector marking. Please feel free to contact us if you have any inquiries. 【Features】 ■ Equipment for marking the caps of cylinder heads ■ Uses a 3-axis robot and vector marking ■ Workpiece: Cylinder head (engine) ■ Cycle time: 1.0 minute ■ Equipment dimensions: L2800mm × W1400mm × H1900mm *For more details, please refer to the PDF document or feel free to contact us.

• Other industrial robots
• Assembly robot
• Marking machine

The "Cap Assembly In/Out Device" is equipment for receiving and delivering cylinder heads. The equipment dimensions are L4150mm × W2500mm × H2000mm. It uses conveyor pallet transport. Please feel free to contact us if you have any inquiries. 【Features】 ■ Equipment for receiving and delivering cylinder heads ■ Conveyor pallet transport ■ Workpiece: Cylinder head (engine) ■ Cycle time: 1.0 minutes ■ Equipment dimensions: L4150mm × W2500mm × H2000mm *For more details, please refer to the PDF document or feel free to contact us.

• Other industrial robots
• Assembly robot

The "Pin Insertion Device" is equipment for pressing pins into cylinder heads. The equipment dimensions are L3500mm × W2500mm × H2100mm. It adopts a revolver-type servo press insertion method. Please feel free to contact us when you need assistance. 【Features】 ■ Equipment for pressing pins into cylinder heads ■ Revolver-type servo press insertion method ■ Workpiece: Cylinder head (engine) ■ Cycle time: 1.0 minute ■ Equipment dimensions: L3500mm × W2500mm × H2100mm *For more details, please refer to the PDF document or feel free to contact us.

• Other industrial robots
• Assembly robot

As a trusted partner in the automotive industry, we respond to demands for high quality and short delivery times by supplying a wide range of production equipment and jigs. We provide comprehensive support from design to launch. Our specialists, experienced in FA and robot system integration, contribute to the streamlining of production processes. 【Examples of Products】 ■ Assembly equipment, transport equipment, welding equipment, leak testers, cleaning equipment, measuring equipment, processing equipment *For inquiries regarding automation and labor-saving devices, or robot system integration, please contact us or download the PDF for more information.

• Other industrial robots