河合テック List of Products and Services

The "APS8-600" is a gantry-type fully automatic side grinding machine that offers exceptional rigidity and stable grinding due to its gantry structure. The stone guide for aligning the grinding reference surface features a high rigidity and easy-to-operate one-touch link system. It can be operated promptly after installation without the need for special foundation work. 【Features】 ■ Exceptional rigidity and stable grinding due to the gantry structure ■ The dimensions of the height and width of the processed stone can be easily set using a diagonal two-point setting method ■ The range of movement during processing can be adjusted entirely via the operation panel ■ The magazine can hold 8 types of grinding wheels, allowing for the selection of only the necessary wheels for processing ■ The number of grinding pattern cycles and feed amounts can be set for each process *For more details, please refer to the PDF document or feel free to contact us.

• Other machine elements
• Wafer processing/polishing equipment
• Other processing machines

The "SH-40G" is a medium-diameter gantry cutting machine with an excellent rigidity due to its gantry structure, resulting in minimal vibration and stable cutting performance. The cutting (moving table) travel is achieved through a combination of a rack and inverter continuous variable speed, allowing for a smooth feed rate of 500 to 6500 mm/min, which can be easily adjusted using the control panel's volume control. 【Features】 ■ The gantry structure provides outstanding rigidity, minimal vibration, and stable cutting performance. ■ It has sufficient weight to extend blade life. ■ A steel belt is installed on the top surface of the cross rail to maintain high precision over the long term. ■ The 6-foot and 7-foot models have a monolithic structure for the main body and bed, eliminating the need for special foundation work. ■ The machine can be used promptly after delivery. *For more details, please refer to the PDF document or feel free to contact us.

• Other machine elements
• Special Processing Machinery
• Other cutting tools

The "SD-72/88" features a column made of high-grade cast iron (FC30), with a square sliding surface equipped with forced automatic centralized lubrication. It comes standard with a steel plate cover on the bottom and a bellows on the top, ensuring long-term wear resistance and maintaining high precision. This is a large-diameter gantry cutting machine. The large column and large cross rail, precisely machined, provide high rigidity, low vibration, and low noise, while also being designed to support the highest class of weight to extend blade life. 【Features】 ■ Weight that suppresses vibration and noise ■ Rigidity that withstands heavy cutting ■ Proven durability from conventional machines ■ High operability focused on user needs *For more details, please refer to the PDF document or feel free to contact us.

• Other machine elements
• Special Processing Machinery
• Other cutting tools

The "ST-2 type" is a high-speed manual polishing machine developed with the aim of high efficiency and labor saving, specifically designed and manufactured to fully utilize the lifespan and performance of diamond tools. It features a water injection method from the center of the spindle, and cutter replacement is done with a one-touch mechanism. Additionally, the improved boss mounting section and spring maintain an appropriate polishing pressure. 【Features】 ■ Developed for high efficiency and labor saving ■ Specifically designed and manufactured to fully utilize the lifespan and performance of diamond tools ■ Consideration of weight balance in each component, providing sufficient rigidity ■ Minimal vibration and recoil during operation, enabling the creation of a uniform and vivid polished surface ■ The spindle drive employs a multi-pole conversion motor, allowing for quick speed changes via a hand-operated switch *For more details, please refer to the PDF materials or feel free to contact us.

• Other machine elements
• Wafer processing/polishing equipment
• Other processing machines

The MS-400 is a 2D shape processing machine capable of machining complex shapes using NC control, suitable for materials such as urethane, resin, and ceramics. It allows for the processing of hard materials thanks to diamond-coated particles. With optional features, wet cutting using cutting water is possible. We have made it possible to process various materials using our proprietary wire. 【Features】 ■ Capable of processing hard materials with diamond-coated particles ■ Wet cutting using cutting water is possible (optional) ■ Capable of machining complex shapes using NC control ■ Able to process various materials using our proprietary wire *For more details, please refer to the PDF document or feel free to contact us.

• Other machine elements
• Special Processing Machinery
• Other processing machines

The "SH-BE/DE" is a hand-cut automatic (manual compatible) type product with a gantry structure, providing excellent machine rigidity, minimal vibration, and stable cutting performance. Since the main body and bed are integrated, no special foundation work is required. The slide (one-touch lever) system of the feed motor allows for the selection of "manual" or "automatic," enabling cutting according to the application. 【Features】 ■ Hand-cut automatic (manual compatible) type ■ Excellent machine rigidity due to the gantry structure, resulting in minimal vibration and stable cutting ■ No special foundation work required due to the integrated main body and bed ■ The machine can be used immediately after delivery ■ The cutting feed has been changed to a rack system, eliminating issues such as oil splatter and wear of the lead screw *For more details, please refer to the PDF materials or feel free to contact us.

• Other machine elements
• Special Processing Machinery
• Other processing machines

The "HN1000-1D" is a digital cross-cutting machine for precision processing of expanded polystyrene that allows for troublesome block cutting with just this one unit. It can perform slicing and vertical cuts automatically by inputting the desired block dimensions. The rotating table is controlled by a rack and inverter, ensuring smooth rotation without damaging the products after cutting. 【Features】 - No need for nichrome alignment - Input cutting dimensions and press the start button - Continuous cutting of all processes - Horizontal slicing and vertical cutting are completed on the spot, eliminating the hassle of moving between processes - Peeling can also be done automatically by inputting the peeling amount, with automatic calculations for nichrome diameter and melting allowance *For more details, please refer to the PDF materials or feel free to contact us.

• Other machine elements
• Special Processing Machinery
• Other processing machines

The "SB-200" is a compact stone drilling machine developed to perform stable and high-efficiency drilling operations, featuring high quality and precision processing similar to other Kawai-style machines. The cutting tool at the tip rotates, and when the handle is turned, the tool descends, creating a hole the same size as the tool. 【Features】 - The table can move independently forward and backward, as well as left and right, and the rail extends to the left, making alignment and loading/unloading of workpieces easy. - The spindle rotation speed can be changed in two stages using a belt change system. - Water injection is performed from the rotating valve at the top of the spindle, which minimizes valve failures and does not hinder operations with hoses during processing. - The vertical movement of the spindle eliminates the conventional coil spring, adopting a latch system, and the cutting handle has been modified to a through-rod type to allow for longer (and greater force application). *For more details, please refer to the PDF document or feel free to contact us.

• Other machine elements
• Special Processing Machinery
• Other processing machines

The "Hi-Cut NC Machine" is a product designed for precision foam processing that enables more complex machining without the hassle of moving the workpiece, thanks to its equipped electric rotating table. The nichrome heat output can be adjusted via the control panel to match the processed product. Additionally, the nichrome current value is displayed on the CRT, and during automatic processing, it monitors for nichrome disconnections or overcurrent, automatically stopping the machine in case of abnormalities. 【Machine Features】 ■ Accurately cuts complex shapes ■ NC control using 2-axis servo ■ The airflow of the nichrome cooling fan can be adjusted using the volume on the control panel ■ The nichrome heat output can be adjusted via the control panel to match the processed product ■ By using the electric rotating table (optional), continuous cutting on four sides and more complex machining can be performed automatically *For more details, please refer to the PDF materials or feel free to contact us.

• Other machine elements
• Special Processing Machinery
• Other processing machines

Have you ever wondered, "Is there a machine that can cut and process materials of this size and this type, such as stone, brick, ceramics, glass, and concrete, from small to large?" Our blade cutting machines, boring machines, and polishing machines can cut any hard material with diamond blades. With over 40 years of experience in stone cutting machinery, our technical expertise and quality are well-regarded, and our machines are used in research facilities as well. *For more details, please contact us or download the PDF to view.

• Other processing machines