アイニチ List of Products and Services

Here is an example of a chair lift installed in a residence in Osaka Prefecture. This time, we adopted the "Escort Slim" for indoor straight stairs. It can be installed on narrow stairs, and the chair that arrives at the top of the stairs can rotate at two angles: 55 degrees and 85 degrees, allowing those with limited mobility to get on and off safely and securely. 【Escort Slim Features】 ■ For indoor straight stairs ■ Can be installed on narrow stairs ■ Rotates at two angles: 55 degrees and 85 degrees *For more details, please refer to the related link page or feel free to contact us.

• lift
• Other conveying machines

Here is a case study of installing a stairlift at Mr. M's home in Osaka Prefecture. The client is elderly and has difficulty with mobility, making it challenging to navigate the stairs, which led them to consider the introduction of a stairlift. Due to the narrow width of the stairs and the condition of having a straight staircase of about 4 meters, we proposed the "Escort Slim" stairlift. When not in use, the seat can be folded up, allowing it to be compacted to a state of just 25 cm from the wall, so the width of the stairs is not a concern. 【Installation Details】 ■ Location: Private residence ■ Stops: 2 stops (1st floor to 2nd floor) ■ Capacity: 1 person (maximum 90 kg) ■ Rated speed: 6.2 m/min *For more details, please refer to the related link page or feel free to contact us.

• lift
• Other conveying machines

We would like to introduce a case where a Panasonic home elevator was installed in a private residence located in Osaka Prefecture. We received a request from the homeowner who wished to install a home elevator in their upcoming three-story private residence. To accommodate larger items and to ensure that all family members can use it in the future, we proposed the "1414 Midi Modern H" based on the dimensions of the hoistway. It can hold three people, with effective internal dimensions of a maximum entrance width of 950mm and a depth of 1150mm. Additionally, the maximum descent speed is 30m per minute, which helps reduce travel time between floors. 【Installation Details】 ■ Location: Private residence ■ Stops: 4 stops (from the 1st floor to the rooftop) ■ Capacity: 3 people (maximum 200kg) ■ Rated speed: 20m/min ascending, 30m/min descending *For more details, please refer to the related link page or feel free to contact us.

• lift
• Other conveying machines
• Machinery and equipment installation/dismantling/relocation

We would like to introduce a case where a small freight elevator (dumbwaiter) was installed in a Chinese restaurant located in Okayama Prefecture. Originally, the restaurant was only on the first floor, but as it expanded to the second floor, an elevator was necessary. There was no space for a kitchen on the first floor, so we considered a space-saving elevator to be installed in the hall. Additionally, due to the shape of the store, they requested an L-shaped opening. Therefore, we proposed the smaller "ADC-400G model (L-shaped type)" from our product lineup. After installation, it was placed in the first-floor hall in a space-saving manner, ensuring it did not obstruct the movement of the staff working in the store. 【Dumbwaiter Installation Details】 ■ Model Number: ADC-400G ■ Load Capacity: 30kg ■ Exterior Material: Steel ■ Size of the Car (Platform): Width: 400mm × Depth: 370mm × Height: 650mm ■ Number of Stops: 2 stops (1st floor - 2nd floor) ■ Entrance/Exit Direction: L-shaped direction ■ Lifting Speed: 45m/min (50/60Hz) ■ Height of the Opening: 1st floor 800mm, 2nd floor 800mm *For more details, please refer to the related link page or feel free to contact us.

• lift
• Other conveying machines

We would like to introduce a case of installing a small freight elevator (dumbwaiter) at an izakaya located in Kyoto Prefecture. Due to the presence of only a steep staircase for transporting food from the first to the third floor, the establishment requested the installation of a small freight elevator. Given the limited installation space and the short time frame before opening, we proposed the "ADC-400G." The manufacturing period is two weeks, and installation can be completed in one day, allowing for a speedy response. Additionally, the external dimensions of the unit are provided from W570×D570mm. 【Dumbwaiter Installation Details】 ■ Model Number: ADC-400G ■ Load Capacity: 30kg ■ Exterior Material: Steel ■ Size of the Car (Cargo Platform): Width: 400mm × Depth: 370mm × Height: 650mm ■ Number of Stops: 3 stops (1st floor - 3rd floor) ■ Entrance/Exit Direction: One direction ■ Lifting Speed: 45m/min (50/60Hz) ■ Height of the Discharge Opening: 800mm from 1st floor to 3rd floor *For more details, please refer to the related link page or feel free to contact us.

• lift
• Other conveying machines

We would like to introduce a case where a dumbwaiter was installed in a Chinese restaurant located in Saitama Prefecture. The dumbwaiter is used to transport Chinese dishes and drinks from the kitchen to the table seats on the 1st to 3rd floors. The entrance and exit direction is in an L-shape, allowing for the dishes to be loaded and unloaded from different directions on each floor. Additionally, the height of the retrieval opening has been raised by 455mm above the standard to 1055mm, aligning it with the height of the counter kitchen. 【Dumbwaiter Installation Details】 ■ Model Number: ADC-700G ■ Load Capacity: 100kg ■ Exterior Material: Steel ■ Size of the Car (Platform): Width: 655mm × Depth: 655mm × Height: 750mm ■ Number of Stops: 3 stops (1st floor - 3rd floor) ■ Entrance and Exit Direction: L-shape ■ Lifting Speed: 45m/min (50/60Hz) ■ Retrieval Opening Heights: 1st floor 1055mm, 2nd floor 800mm, 3rd floor 800mm *For more details, please refer to the related link page or feel free to contact us.

• lift
• Other conveying machines

We would like to introduce a case of installing a dumbwaiter at a Chinese restaurant in Kanagawa Prefecture. The dumbwaiter is used to transport food and beverages from the kitchen to the tables on each floor. The standard height for the retrieval opening is 700mm, but this time we raised the foundation on the first floor by +300mm to make it 1000mm, eliminating the step at the base of the dumbwaiter. 【Dumbwaiter Installation Details】 ■Model Number: ADC-400G ■Load Capacity: 30kg ■Exterior Material: Steel ■Cabin (Platform) Size: Width: 400mm × Depth: 370mm × Height: 650mm ■Number of Stops: 2 stops (1st floor - 2nd floor) ■Entrance/Exit Direction: One-way ■Lifting Speed: 45m/min (50/60Hz) ■Retrieval Opening Height: 1st floor 1000mm, 2nd floor 700mm *For more details, please refer to the related link page or feel free to contact us.

• lift
• Other conveying machines

We would like to introduce a case where a small freight elevator (dumbwaiter) was installed in a hotel located in Gunma Prefecture. It is used to transport food, beverages, and linens to the guest rooms on each floor. This time, the small freight elevator was installed in the hallway in front of the guest rooms, just like on the 1st and 2nd floors. 【Dumbwaiter Installation Details】 ■Model Number: ADC-600G ■Load Capacity: 50kg ■Exterior Material: Steel ■Cab (Platform) Size: Width: 600mm × Depth: 570mm × Height: 650mm ■Number of Stops: 2 stops (1st floor - 2nd floor) ■Entrance Direction: One-way ■Lifting Speed: 45m/min (50/60Hz) ■Height of Exit: 1st Floor 800mm, 2nd Floor 800mm *For more details, please refer to the related link page or feel free to contact us.

• lift
• Other conveying machines

We would like to introduce a case where a small freight elevator (dumbwaiter) was installed at a gyoza specialty store in Hyogo Prefecture. Originally an old house, the building was renovated to become a store. Given the current layout, serving from the first floor to the second floor would be quite challenging, so the introduction of a small freight elevator was considered. This time, we proposed the "ADC-500G," which can be installed in a minimum space of width: 620mm × depth: 620mm. The manufacturing takes two weeks, and installation is completed in one day, so it can be delivered even if the schedule is tight before the opening. 【Dumbwaiter Installation Details】 ■ Model Number: ADC-500G ■ Load Capacity: 40kg ■ Exterior Material: Steel ■ Size of the Car (Cargo Platform): Width: 500mm × Depth: 470mm × Height: 650mm ■ Number of Stops: 2 stops (1st floor - 2nd floor) ■ Entrance/Exit Direction: One-way ■ Lifting Speed: 45m/min (50/60Hz) ■ Height of the Discharge Opening: 1F 800mm, 2F 800mm *For more details, please refer to the related link page or feel free to contact us.

• lift
• Other conveying machines

We would like to introduce a case where a small freight elevator (dumbwaiter) was installed in a ramen shop located in Chiyoda Ward, Tokyo. A new shop is being opened in an existing building. The building is two stories, and the dumbwaiter will be used to transport food and beverages from the first floor to the second floor dining area. In this instance, we installed the dumbwaiter in the kitchen on both the first and second floors. 【Dumbwaiter Installation Details】 ■ Model Number: ADC-400G ■ Load Capacity: 30kg ■ Exterior Material: Steel ■ Size of the Car (Cargo Platform): Width: 400mm × Depth: 370mm × Height: 650mm ■ Number of Stops: 2 stops (1st floor - 2nd floor) ■ Entrance Direction: One-way ■ Lifting Speed: 45m/min (50/60Hz) ■ Height of the Discharge Opening: 1st Floor 800mm, 2nd Floor 800mm *For more details, please refer to the related link page or feel free to contact us.

• lift
• Other conveying machines

We would like to introduce a case of installing a small freight elevator (dumbwaiter) at a research institute in Gifu Prefecture. With the expansion of the research building, there was a need for an elevator. Due to the difficulty in securing significant space within the building, a model that could be installed in a compact manner was desired. Based on the installation space and the items to be transported, we proposed the small freight elevator "ADC-700G type." Since the site has a high floor height, some of the intermediate panels were custom-made. 【Dumbwaiter Installation Details】 ■ Model Number: ADC-700G (Compact Type) ■ Load Capacity: 60kg ■ Size of the Car (Platform): Width: 700mm × Depth: 670mm × Height: 750mm ■ Lifting Speed: 45m/min (50Hz/60Hz) ■ Installation Location: Research Institute *For more details, please refer to the related link page or feel free to contact us.

• lift
• Other conveying machines

Here is an example of the installation of a small freight elevator (dumbwaiter) at an office located in Nara Prefecture. In this office, the small freight elevator (dumbwaiter) is used to transport documents and office supplies to the conference room and office. This time, a through-direction small freight elevator was installed. With the entrance and exit openings on opposite sides, it allows for smoother loading and unloading depending on the building's structure. 【Details of the dumbwaiter installation】 ■Model number: ADC-700G type (compact type) ■Load capacity: 100kg ■Size of the car (platform): Width: 700mm × Depth: 670mm × Height: 750mm ■Lifting speed: 45m/min (50Hz/60Hz) ■Installation location: Office *For more details, please refer to the related link page or feel free to contact us.

• lift
• Other conveying machines

Here is an example of a small freight elevator (dumbwaiter) installed at a factory in Hiroshima Prefecture. In this factory, the small freight elevator is used to transport lightweight automotive parts and meals for employees to the upper floor. This time, a stainless steel small freight elevator was installed. Compared to steel, it is more resistant to heat and rust, allowing for cleaner use. 【Details of the dumbwaiter installation】 ■ Model number: ADC-800G type (compact type) ■ Load capacity: 100kg ■ Size of the car (platform): Width: 755mm × Depth: 755mm × Height: 750mm ■ Lifting speed: 45m/min (50Hz/60Hz) ■ Installation location: Factory *For more details, please refer to the related link page or feel free to contact us.

• lift
• Other conveying machines

Here is an example of the installation of a small freight elevator (dumbwaiter) at a nursery school located in Kanagawa Prefecture. At the newly opened nursery, various items such as tools and packages are scheduled to be transported using the small freight elevator. The elevator is equipped with an intercom, allowing for smooth communication with people on different floors. 【Dumbwaiter Installation Details】 ■ Model Number: ADC-800S (Compact Type) ■ Load Capacity: 80kg ■ Car (Platform) Dimensions: Width: 800mm × Depth: 800mm × Height: 900mm ■ Lifting Speed: 25m/min (50Hz/60Hz) ■ Installation Location: Nursery School *For more details, please refer to the related link page or feel free to contact us.

• lift
• Other conveying machines

A small lift (blue lift) has been installed in a warehouse located in Shizuoka Prefecture. In the renovation of the existing warehouse to construct a second floor, a lift for transporting materials was needed. Considering the desire to differentiate the orientation and types of carts to be used, an L-shaped lift was preferred. The items to be transported come in various shapes, and the installation space at the site was also limited. Therefore, we proposed a blue lift with an L-shaped entrance and exit direction. After installation, the transportation of materials and products has become smooth, even with the construction of the second floor. [Case Study] ■ Location: Warehouse ■ Types of items: Materials, products, etc. ■ Stops: 2 stops (1st floor to 2nd floor) ■ Entrance and exit direction: Single-opening door / L-shaped direction ■ Lifting height: 3.0m ■ Cage size: Large cage (W:800/D:1000/H:900mm) *For more details, please refer to the related link page or feel free to contact us.

• lift
• Machinery and equipment installation/dismantling/relocation

A small lift (blue lift) has been installed in an existing warehouse in Niigata Prefecture. The customer will use the small lift to transport machinery and equipment. This blue lift has been installed without a pit, and later, a ramp will be added through construction on the building side to allow for smooth loading of carts and other items. Our company has experience installing various types of lifts. We can propose a lift that suits the site conditions, so please feel free to contact us. 【Case Study】 ■ Location: Warehouse ■ Type of cargo: Machinery and equipment ■ Number of stops: 2 stops (1st floor to 2nd floor) ■ Entrance direction: Single-opening door / One direction ■ Lifting height: 4.5m ■ Cage size: Large cage (W:800/D:1000/H:900mm) *For more details, please refer to the related link page or feel free to contact us.

• lift
• Machinery and equipment installation/dismantling/relocation

We have installed a small lift (blue lift) in a newly built warehouse located in Nagano Prefecture. The customer will use the small lift to transport electrical equipment and other items. The entrance and exit direction is a single-opening door/one-way. The lift has two stops, from the first floor to the second floor. Our company has experience in installing various types of lifts. We can propose a lift that suits the site conditions, so please feel free to contact us. 【Case Study】 ■ Location: Warehouse ■ Type of cargo: Electrical equipment, etc. ■ Number of stops: 2 stops (1st floor to 2nd floor) ■ Entrance and exit direction: Single-opening door/one-way ■ Lifting height: 2.75m ■ Cage size: Large cage (W:800/D:1000/H:900mm) *For more details, please refer to the related link page or feel free to contact us.

• lift
• Machinery and equipment installation/dismantling/relocation

A small lift (Blue Lift) has been installed in a warehouse located in Hyogo Prefecture. Originally, the first floor was used as a warehouse and the second floor as an office, but as the second floor is now also being used as a warehouse, a lift became necessary. Due to limited installation space and the condition that the site could not provide a three-phase 200V power supply, we proposed the Blue Lift. We adopted L-shaped doors that can be opened from different directions on both the first and second floors. 【Case Study】 ■ Location: Warehouse ■ Type of cargo: Clothing ■ Number of stops: 2 (1st floor to 2nd floor) ■ Entrance opening direction: Single door / L-shaped direction ■ Lifting height: 3.25m ■ Cage size: Large cage (W:800/D:1000/H:900mm) *For more details, please refer to the related link page or feel free to contact us.

• lift
• Machinery and equipment installation/dismantling/relocation

A small lift (Blue Lift) has been installed in a warehouse located in Yamaguchi Prefecture. We received an inquiry about wanting to install a lift to transport car supplies and car parts from the first floor to the second floor in a newly built warehouse. Based on the request for a cost-effective installation that uses a household power supply, we proposed the Blue Lift. It was mentioned that car supplies and car parts would be transported using a small cart, but with the Blue Lift, a standard cart can be loaded and transported directly. 【Case Study】 ■ Location: Warehouse ■ Type of Cargo: Car supplies, car parts ■ Number of Stops: 2 stops (1st floor to 2nd floor) ■ Entrance Direction: Single-opening door/one direction ■ Lifting Height: 3.0m ■ Cage Size: Large cage (W:800/D:1000/H:900mm) *For more details, please refer to the related link page or feel free to contact us.

• lift
• Machinery and equipment installation/dismantling/relocation

A small lift (Blue Lift) has been installed in an office and warehouse located in Hiroshima Prefecture. It was determined that transporting products and materials to the second floor warehouse using stairs would be difficult in the newly constructed office and warehouse, and a lift was requested. This time, we proposed the Blue Lift, which allows for the transportation of goods along with the cart and can be used with a household power supply of AC 100V. The Blue Lift is a two-stop lift that operates between the first and second floors, generating minimal noise and providing quiet operation. [Case Study] - Location: Office and warehouse - Type of cargo: Products and materials - Stop points: Two stops (1st floor to 2nd floor) - Entrance direction: Single-opening door / One direction - Lifting height: 3.25m - Cage size: Large cage (W:800/D:1000/H:900mm) *For more details, please refer to the related link page or feel free to contact us.

• lift
• Machinery and equipment installation/dismantling/relocation

We installed a small lift (Blue Lift) at N General Goods Store in Mie Prefecture. In the process of renovating and refurbishing the building, we received a request to install an elevator. Additionally, there was a desire to transport goods directly to the second-floor store using a cart within the limited installation space. Due to the restricted installation area, we proposed the Blue Lift. The basket of the Blue Lift uses a large basket (1000×800×H900), allowing for the transportation of standard-sized carts directly to the second-floor store. [Case Study] ■ Location: General Goods Store ■ Type of Goods: Products and packages ■ Stops: 2 stops (1st floor to 2nd floor) ■ Entrance Direction: Single-opening door/One direction ■ Entrance Door: Two upper-opening doors (manual) ■ Lifting Distance: 3.75m ■ Basket Size: Large basket (W: 800/D: 1000/H: 900mm) *For more details, please refer to the related link page or feel free to contact us.

• lift
• Machinery and equipment installation/dismantling/relocation

Here is an example of the installation of a "Hyper Lift" in a warehouse located in Hyogo Prefecture. There were requests to "transport large items to the upper floor in the warehouse" and "load and unload in different entrance directions on the first and second floors." Based on the request to transport large items in the warehouse, we proposed the Hyper Lift. To accommodate loading and unloading in different directions, this time we opted for a through direction. 【Example】 ■ Location: Warehouse ■ Stops: 2 stops (1st floor to 2nd floor) ■ Entrance and exit direction: Through direction ■ Entrance door: One manual top-opening door ■ Type of cargo: Materials, etc. *For more details, please refer to the related link page or feel free to contact us.

• lift
• Other conveying machines

Here is an example of the installation of a "Hyper Lift" at a warehouse located in Chiba Prefecture. The paint color for this installation is ivory. The Hyper Lift is available in your choice of ivory, green, or gray. If you would like a custom color, please consult with us. Additionally, the installation space at this site was limited, but we coordinated with the contractor to carry out the installation. The Hyper Lift can be installed in various locations such as factories and warehouses. [Example] ■ Location: Warehouse ■ Stops: 2 stops (1st floor to 2nd floor) ■ Entrance direction: One-way ■ Entrance doors: Two manual top-opening doors ■ Type of cargo: Precision machinery, etc. *For more details, please refer to the related links page or feel free to contact us.

• lift
• Other conveying machines

We would like to introduce a case where a "Hyper Lift" was installed in a warehouse located in Chiba Prefecture. The Hyper Lift (simple lift) is used to transport equipment in existing warehouses. Using the Hyper Lift can help improve work efficiency. In this case, the installation was done on the first floor of the building without a pit. If there were a pit, the Hyper Lift could be made flush with the floor, but additional construction work would be required. If you have any questions, no matter how trivial, please feel free to ask. 【Case Study】 ■ Location: Warehouse ■ Stops: 2 stops (1st floor to 2nd floor) ■ Entrance direction: One-way ■ Entrance door: One manual top-opening door ■ Type of cargo: Equipment and others *For more details, please refer to the related link page or feel free to contact us.

• lift
• Other conveying machines

Here is an example of the installation of a "Hyper Lift" in a warehouse located in Saitama Prefecture. The simple lift is used to transport equipment in existing warehouses. When you want to raise and lower goods efficiently and safely, the Hyper Lift is helpful. The Hyper Lift in this case uses steel plate panels as an option for the lift shaft. Unlike regular expanded metal, the steel plate panels cover the entire lift shaft, so the contents inside are not visible. The color was painted according to the specified Nippon Paint number provided by the customer. 【Example】 ■ Location: Warehouse ■ Stops: 2 stops (1st floor to 2nd floor) ■ Entrance direction: One-way ■ Entrance doors: Two upward-opening doors (manual) ■ Type of goods: Equipment and others *For more details, please refer to the related link page or feel free to contact us.

• lift
• Other conveying machines

Here is a case study of the installation of a "Hyper Lift" at an office and warehouse located in Fukui Prefecture. In this instance, we received requests to transport using a platform cart and to have the lift operate in a through direction (allowing entry and exit from both sides). The lift was designed to stop at four levels, from the 1st to the 4th floor. The lifting height of the Hyper Lift can reach up to 12 meters. Since the building has a basement, it was determined that the strength of the 1st floor slab alone would not be sufficient to support the weight of the lift, so the lift shaft was designed starting from the basement. 【Case Study】 ■ Location: Office and warehouse ■ Stopping points: 4 stops (1st to 4th floor) ■ Entry and exit direction: Through direction ■ Entrance doors: Two manual top-opening doors ■ Type of cargo: Materials, etc. *For more details, please refer to the related link page or feel free to contact us.

• lift
• Other conveying machines

Here is a case study of the installation of a "Hyper Lift" in a warehouse located in Saitama Prefecture. When the customer relocated to the existing warehouse, there was no lift in the building, and they wanted to transport heavy printed materials to the second floor. Using the stairs and carrying them by hand was quite difficult, so they requested the installation of a lift. Due to limited space for lift installation in the existing building, we proposed the Hyper Lift (a simple lift) that could meet the conditions. After the installation, it has reduced employee fatigue and allowed for safer operations. [Case Study] - Location: Warehouse - Stops: 2 stops (1st floor to 2nd floor) - Entrance direction: One-way - Entrance doors: Two manual doors that open upwards - Type of cargo: Equipment, etc. *For more details, please refer to the related link page or feel free to contact us.

• lift
• Other conveying machines

Here is a case study of the installation of a "Hyper Lift" in a warehouse located in Nara Prefecture. The relocated warehouse had an existing lift, but it was aging and lacked safety measures, so they were considering installing a new lift. Since there was a desire to implement proper safety measures and transport large carts and goods, we proposed the Hyper Lift. The Hyper Lift comes standard with safety devices and can smoothly transport large items, which also helps improve operational efficiency. [Case Study] ■ Location: Warehouse ■ Stops: 2 stops (1st floor to 2nd floor) ■ Entrance direction: One-way ■ Entrance doors: Two top-opening doors (manual) ■ Type of goods: Equipment, etc. *For more details, please refer to the related link page or feel free to contact us.

• lift
• Other conveying machines

Here is an example of the installation of a "Hyper Lift" at a factory located in Shizuoka Prefecture. With the construction of a new factory, the only means of transporting heavy items to the upper floors was via stairs, prompting the consideration of installing a lift. We understood the desire to keep costs low and proposed the Hyper Lift (a simple lift), which can be installed at a lower cost than an elevator. The Hyper Lift can be freely manufactured to suit the installation location and intended use, and can be tailored to the specifications suitable for the materials being transported. [Case Study] ■ Location: Factory ■ Stops: 2 stops each (1st floor to 2nd floor) ■ Entrance direction: Each with a single swing door / one direction ■ Entrance door: Each with one manually operated top-opening door ■ Type of cargo: Materials, etc. *For more details, please refer to the related link page or feel free to contact us.

• lift
• Other conveying machines

Ainichi designs and sells elevators with a focus on safety standards, including fall prevention devices and limit switches. This document provides detailed guidance on how to choose elevators based on installation locations, such as factories, warehouses, and restaurants. If you are unsure about what kind of elevator to install, please use this as a reference. [Contents] ■ How to choose elevators and freight lifts for factories and warehouses ■ How to choose service elevators for restaurants ■ How to choose home elevators for residential use ■ Contact information *For more details, please refer to the PDF document or feel free to contact us.

• others

The "VS Series" is a compact elevator manufactured by Panasonic. If you want to install an elevator but find it difficult to install a commercial elevator, we have upgraded the functionality for small buildings such as daycare centers and welfare facilities. We offer two types: the "XL Wellheart VS," which has an interior depth of 1450mm to comply with the "Welfare City Development Ordinance" of municipalities nationwide, and the "Wellheart VS," which has a space-saving depth of 1150mm. 【Features】 ■ Large operation buttons ■ One-touch emergency call button telephone ■ LED lighting ■ Horizontal handrails ■ Multi-beam door sensors *For more details, please refer to the related link page or feel free to contact us.

• lift
• Machinery and equipment installation/dismantling/relocation

The collection of installation examples for elevators is a compilation that responds to various requests such as "I want to install an elevator in a building that only has external stairs during renovation or remodeling" and "I want to transport cardboard boxes, trays, and food and beverages." These elevators have been installed in various locations such as factories, stores, restaurants, schools, buildings, and condominiums. The collection summarizes the background of the elevator installations, images before and after installation, and the effects after installation. [Background of Elevator Installation] - I want to install an elevator in a building that only has external stairs during renovation or remodeling. - I want to load and transport cardboard boxes onto the elevator manually. - I want to transport food and beverages using the elevator without going outside the building. - I want to install an elevator in a limited vertical transport space. - A malfunction occurred where the external door of the elevator is heavy and difficult to open and close (repair). ★ A collection of elevator installation examples is currently being offered for free! ★ *For more details, please refer to the external link page or feel free to contact us.*

• lift
• Other conveying machines

Ainichi Corporation has installed a "dumbwaiter" for Mr. K in Kofu City, Yamanashi Prefecture. The first floor is a workspace for sorting vegetables and groceries, while the second floor is a residence. It is used to transport products up and down. Our dumbwaiter features a compact design, allowing for efficient operation without waste. Additionally, it can be easily installed, making it more cost-effective compared to other lifts, providing economic peace of mind. [Case Overview (Excerpt)] ■ User: Mr. K, Kofu City, Yamanashi Prefecture ■ Installation Site: Workspace and residence ■ Model Number: ADC-500G ■ Load Capacity: 40kg ■ Exterior Material: Steel *For more details, please refer to the external link page or feel free to contact us.

• lift
• Machinery and equipment installation/dismantling/relocation
• Food Conveyor Equipment

We installed a small freight elevator for Mr. S at an izakaya located in Kagoshima City, Kagoshima Prefecture. Since it will be used in a newly constructed building, the elevator was installed first. It is primarily intended for transporting food, beer cases, and other alcoholic beverages. By removing the shelves inside the cage, items like beer servers can also be elevated. 【Overview】 ■ Model number: ADC-600G ■ Load capacity: 50kg ■ Exterior material: Steel ■ Cage (platform) dimensions: Width 600mm × Depth 570mm × Height 650mm ■ Number of stops: 2 stops (1st floor - 2nd floor) ■ Entrance direction: One-way ■ Lifting speed: 45m/min (50/60Hz) ■ Discharge height: 700mm (standard height) *For more details, please refer to the external link page or feel free to contact us.

• lift
• Machinery and equipment installation/dismantling/relocation
• Food Conveyor Equipment

A dumbwaiter has been installed at a udon restaurant located in Nada Ward, Kobe City, Hyogo Prefecture. Due to the aging of the building, a new store is being constructed, and a dumbwaiter has been installed between the first and second-floor kitchens. The second floor has a spacious number of seats, where regular live events are held. The dumbwaiter will help streamline operations. 【Overview】 ■Model number: ADC-500G ■Load capacity: 40kg ■Exterior material: Steel ■Basket (cargo area) dimensions: Width 500mm × Depth 470mm × Height 650mm ■Number of stops: 2 stops (1st floor - 2nd floor) ■Entrance direction: One-way ■Lifting speed: 45m/min (50/60Hz) ■Height of the discharge opening: 1F 800mm, 2F 800mm ■Installation time: 1 day *For more details, please refer to the external link page or feel free to contact us.

• lift
• Machinery and equipment installation/dismantling/relocation
• Food Conveyor Equipment

We carried out renovation work on the dumbwaiter at a Chinese restaurant located in Amagasaki City, Hyogo Prefecture. The dumbwaiter is used to transport dishes between multiple floors of the restaurant. This time, we renovated it due to issues with a machine from another company. 【Overview】 ■ Installation Location: Amagasaki City, Hyogo Prefecture ■ Establishment: Chinese Restaurant ■ Model Number: Renovation Work ■ Stop Points: 3 stops (1st floor - 3rd floor) *For more details, please refer to the external link page or feel free to contact us.

• lift
• Machinery and equipment installation/dismantling/relocation
• Food Conveyor Equipment

A dumbwaiter has been installed at a creative kushikatsu restaurant located in Nishinomiya City, Hyogo Prefecture. The dumbwaiter is used to transport dishes and drinks such as kushikatsu and grilled skewers up and down. 【Overview】 ■ Installation Location: Nishinomiya City, Hyogo Prefecture ■ Installation Store: Creative Kushikatsu Restaurant ■ Model Number: ADC-400G ■ Stops: 2 stops (1st floor - 2nd floor) *For more details, please refer to the external link page or feel free to contact us.

• lift
• Machinery and equipment installation/dismantling/relocation
• Food Conveyor Equipment

A dumbwaiter has been installed at a takoyaki shop located in Osaka City, Osaka Prefecture. The shop offers takoyaki and okonomiyaki, and the dumbwaiter is used to transport food and drinks. The lift was installed as part of the renovation of the existing store. 【Overview】 ■ Installation Location: Osaka City, Osaka Prefecture ■ Installed Shop: Takoyaki Shop ■ Model Number: ADC-400G ■ Stops: 2 stops (1st floor - 2nd floor) *For more details, please refer to the external link page or feel free to contact us.

• lift
• Machinery and equipment installation/dismantling/relocation
• Food Conveyor Equipment

A dumbwaiter has been installed in a steak restaurant located in Osaka City, Osaka Prefecture. It is used to transport food and drinks. The dumbwaiter can be utilized as a product through assembly work. This time, the area around the dumbwaiter is enclosed due to interior construction. 【Overview】 ■Model Number: ADC-400G ■Load Capacity: 30kg ■Exterior Material: Steel ■Dimensions of the Basket (Cargo Platform): Width 400mm × Depth 370mm × Height 650mm ■Number of Stops: 2 stops (1st floor - 2nd floor) ■Entrance/Exit Direction: One-way ■Lifting Speed: 45m/min (50/60Hz) ■Height of the Exit: 1st Floor 700mm, 2nd Floor 700mm *For more details, please refer to the external link page or feel free to contact us.

• lift
• Machinery and equipment installation/dismantling/relocation
• Food Conveyor Equipment

A dumbwaiter (a small freight elevator) has been installed in an izakaya (bar) located in Toyohashi City, Aichi Prefecture. The installed dumbwaiter is of the 700G type, with a load capacity of 60 kg. The effective dimensions of the basket are W700×D670×H750 mm, allowing for the transportation of a large amount of food and drinks at once. In this case, the height of the discharge openings (the height from the floor to the bottom of the basket) has been set to 800 mm for the 1st floor and 850 mm for the 2nd floor, which is higher than the usual 600–700 mm. 【Overview】 ■ Model number: ADC-700G ■ Load capacity: 60 kg ■ Exterior material: Steel ■ Basket (platform) size: Width 700 mm × Depth 670 mm × Height 750 mm ■ Stopping points: 2 stops (1st floor - 2nd floor) ■ Entrance/exit direction: One direction ■ Lifting speed: 45 m/min (50/60 Hz) ■ Discharge opening height: 1st floor 800 mm, 2nd floor 850 mm *For more details, please refer to the external link page or feel free to contact us.

• lift
• Machinery and equipment installation/dismantling/relocation
• Food Conveyor Equipment

We installed a dumbwaiter (a small freight elevator) at a Korean barbecue restaurant located in Nagoya City, Aichi Prefecture. We received a call regarding the installation of a dumbwaiter for the new store opening, although detailed information had not yet been finalized. Additionally, there was a desire to have it installed as soon as possible, so we visited the site to discuss and assess the situation, and we proposed a suitable type of dumbwaiter. This time, it was installed to allow movement between the kitchen on the first and second floors. Items prepared in the kitchen and those finished by customers are transported to each floor. 【Overview】 ■Model Number: ADC-700G ■Load Capacity: 60kg ■Exterior Material: Steel ■Cab (Platform) Dimensions: Width 700mm × Depth 670mm × Height 750mm ■Number of Stops: 2 stops (1st floor - 2nd floor) ■Entrance Direction: One-way ■Lifting Speed: 45m/min (50/60Hz) ■Height of Exit: 1st Floor 600mm, 2nd Floor 500mm *For more details, please refer to the external link page or feel free to contact us.

• lift
• Machinery and equipment installation/dismantling/relocation
• Food Conveyor Equipment

A dumbwaiter (a small freight elevator) has been installed at a seafood restaurant located in Shizuoka City, Shizuoka Prefecture. The first floor is connected to the kitchen, while the second floor is connected to the dining area. The entrance and exit directions allow for separate access from both the first and second floors, utilizing a through-direction design. Due to the structure of the restaurant, installing it in a through-direction allows dishes placed in the dumbwaiter from the kitchen on the first floor to be quickly transported to the dining area on the second floor. 【Overview】 ■ Model Number: ADC-400G ■ Load Capacity: 30kg ■ Exterior Material: Steel ■ Size of the Car (Cargo Platform): Width 400mm × Depth 370mm × Height 650mm ■ Number of Stops: 2 stops (1st floor - 2nd floor) ■ Entrance and Exit Direction: Through-direction ■ Lifting Speed: 45m/min (50/60Hz) ■ Height of the Discharge Opening: 1F 800mm, 2F 800mm *For more details, please refer to the external link page or feel free to contact us.

• lift
• Machinery and equipment installation/dismantling/relocation
• Food Conveyor Equipment

A dumbwaiter (a small freight elevator) has been installed at a Japanese restaurant located in Hikone City, Shiga Prefecture. The restaurant has been opened after renovating a two-story warehouse, preserving the traditional warehouse structure of the 100-year-old building. On the second floor, a sliding door has been installed in front of the dumbwaiter for easy opening and closing. The dumbwaiter is installed in both the first and second floors' kitchens and is used for transporting prepared dishes and drinks. 【Overview】 ■Model Number: ADC-400G ■Load Capacity: 30kg ■Exterior Material: Steel ■Basket (Platform) Size: Width 400mm × Depth 370mm × Height 650mm ■Number of Stops: 2 stops (1st floor - 2nd floor) ■Entrance/Exit Direction: One-way ■Lifting Speed: 45m/min (50/60Hz) ■Discharge Height: 1F 800mm, 2F 700mm *For more details, please refer to the external link page or feel free to contact us.

• lift
• Machinery and equipment installation/dismantling/relocation
• Food Conveyor Equipment

A dumbwaiter (a small freight elevator) has been installed at a seafood izakaya located in Funabashi City, Chiba Prefecture. The height from the floor to the door of our dumbwaiter (ADC-400G) is standard at 700mm, but this time it has been installed at a slightly higher height of 800-850mm. This reduces the need to bend down, making it easier to load and unload items while standing. We made our proposal based on the conditions of the site this time. 【Overview】 ■ Model Number: ADC-400G ■ Load Capacity: 30kg ■ Exterior Material: Steel ■ Size of the Car (Cargo Area): Width 400mm × Depth 370mm × Height 650mm ■ Number of Stops: 3 stops (1st floor - 3rd floor) ■ Entrance/Exit Direction: One direction ■ Lifting Speed: 45m/min (50/60Hz) ■ Height of the Opening: 1st Floor 850mm, 2nd Floor, 3rd Floor 800mm *For more details, please refer to the external link page or feel free to contact us.

• lift
• Machinery and equipment installation/dismantling/relocation
• Food Conveyor Equipment

A dumbwaiter (a small freight elevator) has been installed at a steak restaurant located in Nagasaki City, Nagasaki Prefecture. The steak restaurant will open on the first and second floors of the building. It has been installed in order to smoothly transport food, ingredients, and dishes between the kitchens on the first and second floors. To blend in with the interior of the store, the dumbwaiter was enclosed with walls during the construction phase, and a four-sided frame was installed in front of the entrance and inspection openings for use. 【Overview】 ■ Model Number: ADC-500G ■ Load Capacity: 40kg ■ Exterior Material: Steel ■ Size of the Car (Platform): Width 500mm × Depth 470mm × Height 650mm ■ Number of Stops: 2 stops (1st floor - 2nd floor) ■ Entrance Direction: One-way ■ Lifting Speed: 45m/min (50/60Hz) ■ Height of the Exit: 1F 800mm, 2F 800mm *For more details, please refer to the external link page or feel free to contact us.

• lift
• Machinery and equipment installation/dismantling/relocation
• Food Conveyor Equipment