ティ・アイ・シィ計測器工業 List of Products and Services

"VST CLOUD" is a construction site environmental monitoring system that manages data from measuring instruments installed on-site via the cloud. With a computer or smartphone connected to the internet, you can monitor the site environment from anywhere. For noise and vibration, L5 and L10 values are calculated in accordance with JIS standards (JIS Z8731), and if abnormal values are observed, you will be notified by email. 【Features】 ■ Monitor the site environment from anywhere with an internet connection ■ Calculate noise and vibration L5 and L10 values in accordance with JIS standards (JIS Z8731) ■ Receive email notifications for abnormal values ■ Offered at a low cost, including cloud usage fees *For more details, please refer to the PDF document or feel free to contact us.

• Other FA equipment
• Vibration Monitoring

Easily retrofit existing devices and sensors for IoT. Data from 4-20mA/1-5V/RS-232C/RS-485 will be transmitted to the cloud via WiFi. - Supported Interfaces Supports not only 4-20mA but also 1-5V, RS-232C, and RS-485 (2-wire, 4-wire). If you wish to transfer data from RS-232C or RS-485, customization of the main unit's software will be necessary, so please consult with us. - Operating Temperature Operates in temperatures from -10°C to +55°C, making it suitable for installation in harsh environments. - WiFi If there is no WiFi environment in factories or outdoors, WiFi can be made available through the industrial LTE router Teltonika RUT240 (operating temperature -40°C to +75°C). - Power Supply It operates not only on DC24V used in control panels but can also be used with an optional AC adapter for AC100V. - Customization In addition to simply outputting measurement results, it can also handle calculations such as averages and L5, L10, etc. Other calculations can also be accommodated, so please consult with us. - Embedded We can provide just the main unit or just the circuit board. It can be integrated into your equipment for use.

• Other FA equipment

Easily retrofit existing devices and sensors for IoT. Data from 4-20mA/1-5V/RS-232C/RS-485 will be transmitted to the cloud via WiFi. - Supported Interfaces Supports not only 4-20mA but also 1-5V, RS-232C, and RS-485 (2-wire, 4-wire). If you wish to transfer data from RS-232C or RS-485, customization of the main unit's software will be required, so please consult with us. - Operating Temperature It operates in a range of -10℃ to +55℃, making it suitable for installation in harsh environments. - WiFi If there is no WiFi environment in factories or outdoors, WiFi can be made available through the industrial LTE router Teltonika RUT240 (operating temperature -40℃ to +75℃). - Power Supply It operates on DC24V used in control panels, and can also be used with an optional AC adapter for AC100V. - Customization In addition to simply outputting measurement results, it can also support calculations such as averages and L5, L10. Other calculations can also be accommodated, so please consult with us. - Embedded We can provide just the main unit or just the circuit board. It can be integrated into your equipment for use.

• Other FA equipment

We will easily retrofit existing devices and sensors to make them IoT-enabled. Data from 4-20mA/1-5V/RS-232C/RS-485 will be transmitted to the cloud via WiFi. - Supported Interfaces We support not only 4-20mA but also 1-5V, RS-232C, and RS-485 (2-wire, 4-wire). If you wish to transmit data from RS-232C or RS-485, customization of the main unit's software will be necessary, so please consult with us. - Operating Temperature It operates in a temperature range of -10℃ to +55℃, making it suitable for installation in harsh environments. - WiFi If there is no WiFi environment in factories or outdoors, WiFi can be made available through the industrial LTE router Teltonika RUT240 (operating temperature -40℃ to +75℃). - Power Supply It operates on DC24V used in control panels, and can also be used with an optional AC adapter for AC100V. - Customization In addition to simply outputting measurement results, it can also handle calculations such as averages and L5, L10, etc. Other calculations can also be accommodated, so please consult with us. - Embedded We can provide just the main unit or just the circuit board. It can be integrated into your equipment for use.

• Other FA equipment

The "SPV type" is a small-diameter flow meter designed and manufactured for the purpose of measuring very low flow rates. It is used for flow monitoring and features a needle valve that allows for flow adjustment while reading the position of the float, which is a significant characteristic. 【Specifications (excerpt)】 ■ Application: For monitoring flow in purge pipes, air and other gases, general clean water or liquid measurement ■ Model number: SPV-8 to 15 ■ Manufacturing diameter: 1/4" to 1/2" ■ Pressure resistance: Maximum 10 kg/cm² (static pressure) ■ Usable temperature range: +10 to +60℃ *For more details, please refer to the PDF document or feel free to contact us.

• Other measurement, recording and measuring instruments

The "SPA type" is a robust and easy-to-disassemble flow meter that has been miniaturized. Among vertical multi-purpose flow meters, it is designed with a particular emphasis on material properties. The main body is made of acrylic resin, and the threaded parts are made of polyvinyl chloride, making it suitable for measuring various chemicals. 【Specifications (excerpt)】 ■ Applications: For measuring caustic soda solutions and other alkaline liquids, as well as hydrochloric acid solutions and other acidic liquids. ■ Model number: SPA-10 to 20 ■ Manufacturing diameter: 3/8" to 3/4" ■ Pressure resistance: Maximum 10 kg/cm² (static pressure) ■ Maximum operating temperature range: 0 to 60°C *For more details, please refer to the PDF document or feel free to contact us.

• Other measurement, recording and measuring instruments

The "ULA type and RLA type" are versatile instruments equipped with total counters and pulse output counters, as well as instantaneous indication needles. In addition to indicating the cumulative flow value, when the cumulative flow value reaches a certain number, it emits a pulse, and the counter automatically returns to zero. This cycle can be used for further accumulation, allowing control based on quantity rather than pressure or other factors. 【Specifications (excerpt)】 ■ Applications: For measuring transparent and opaque fluids, gases, etc. ■ Model numbers: ULE-40 to 300, RLE-40 to 300 ■ Pressure resistance: Maximum 30 kg/cm² ■ Maximum operating temperature: 80°C ■ Power supply: AC100V, AC200V, 50Hz or 60Hz *For more details, please refer to the PDF document or feel free to contact us.

• Other measurement, recording and measuring instruments

The "ULA type / RLA type" is a multipurpose instrument that adopts a pointer display method based on the "UL type / RL type." In addition to the advantage of being able to perform isolation measurements visually, it is also possible to add upper and lower limit contact mechanisms and output signals. It can be used for opaque fluids, slurries, and other similar fluids. 【Specifications (excerpt)】 ■ Applications: For measuring transparent and opaque fluids, gases, etc. ■ Manufacturing diameter: 1″ to 12″ ■ Model numbers: ULA-25 to 300, RLA-25 to 300 ■ Pressure resistance: Up to 30 kg/cm² ■ Maximum allowable temperature: 120℃ *For more details, please refer to the PDF document or feel free to contact us.

• Other measurement, recording and measuring instruments

This model is an area-type flow meter based on the "RLM type" designed for measuring opaque fluids. It is designed to withstand a maximum pressure of 50 kg/cm²G (static pressure) and can measure superheated saturated water and superheated steam. It is made for use in horizontal flow and horizontal piping. 【Specifications (excerpt)】 ■ Applications: Measurement of transparent and opaque fluids and gases (capable of measuring alkaline, strongly acidic, and organic solvents, etc.) ■ Manufacturing diameter: 1/2″ to 12″ ■ Model number: RLM-15-HF-(flange standard) to RLM-300-HF-(flange standard) ■ Pressure resistance: Maximum 50 kg/cm²G (static pressure) *For more details, please refer to the PDF document or feel free to contact us.

• Other measurement, recording and measuring instruments

This model is an area-type flow meter based on the "ULM type" designed for measuring opaque fluids. It features a heat-resistant structure to enable measurements of superheated saturated water and superheated steam, and is equipped with cooling fins. With a completely sealed structure, it can be used for a wide range of applications from opaque fluids (such as slurry-containing liquids) to gases and steam. 【Specifications (excerpt)】 ■ Applications: Measurement of transparent and opaque fluids and gases (Capable of measuring alkaline, strongly acidic, organic solvents, etc.) ■ Manufacturing diameter: 1/2″ to 12″ ■ Model numbers: ULM-15-HF-(flange standard) to ULM-300-HF-(flange standard) ■ Pressure resistance: Maximum 50kg/cm2G (static pressure) *For more details, please refer to the PDF document or feel free to contact us.

• Other measurement, recording and measuring instruments

The "RL type and RLM type" are area-type flow meters designed for use in horizontal piping installations. The "RLM type" features a built-in magnet and a sealed structure designed to prevent liquid leakage at the scale indicator, making it suitable for measuring opaque fluids and slurry-containing fluids. Additionally, this model is robust and versatile, similar to the "UL and ULM types," and allows for various linings in the wetted parts. 【Specifications (excerpt)】 ■ Applications: Measurement of opaque fluids, slurry-containing fluids, etc. (capable of measuring strong acidic, alkaline liquids, organic solvents, etc.) ■ Manufacturing diameter: 3/4″ to 12″ ■ Model numbers: RL-20 to RL-300, RLM-20 to RLM-300 ■ Pressure resistance: Maximum 10 kg/cm² to 50 kg/cm² (static pressure) *For more details, please refer to the PDF document or feel free to contact us.

• Other measurement, recording and measuring instruments

The "UL type and ULM type" are area-type flow meters designed for use in reverse L-shaped piping installations. This model, like the "ST type," can be equipped with various linings in the wetted parts. The "ULM type" features a built-in magnet and is designed with a sealed structure to prevent liquid leakage from the scale indication section. Therefore, it is suitable for measuring opaque fluids and fluids containing slurries. 【Specifications (excerpt)】 ■ Applications: Measurement of transparent and opaque fluids, gases (Capable of measuring strong acidic, alkaline liquids, organic solvents, etc.) ■ Manufacturing diameter: 3/4″ to 12″ ■ Model numbers: UL-20 to UL-300, ULM-20 to ULM-300 ■ Pressure resistance: Maximum 10 kg/cm² to 50 kg/cm² (static pressure) *For more details, please refer to the PDF document or feel free to contact us.

• Other measurement, recording and measuring instruments

The "SPR type (Vertical Multi-Purpose Type)" is a general-purpose instrument consisting of inlet and outlet pipes and a tapered pipe. It is a representative model of area flow meters and offers high precision. Additionally, due to its shape, this device allows for the use of various materials in the liquid contact sections of the inlet and outlet pipes. 【Specifications (excerpt)】 ■ Application: For measuring transparent fluids and gases (Capable of measuring strong acidic, alkaline liquids, organic solvents, etc.) ■ Manufacturing diameter: 1/4″ to 2″ ■ Model numbers: SPR-10 to SPR-50 ■ Pressure resistance: Maximum 10 kg f/cm2G *For more details, please refer to the PDF document or feel free to contact us.

• Other measurement, recording and measuring instruments

The "KS type (vertical type)" is a flow meter made entirely of acrylic resin for the body and flange section. It has an attractive appearance and is particularly suitable for measuring the flow of pure water and drinking water. The pressure resistance is up to 10 kg/cm² (static pressure). 【Specifications (excerpt)】 ■ Application: For measuring transparent fluids such as drinking water and pure water ■ Manufacturing diameter: 1/2″ to 3″ ■ Model numbers: KS-15 to KS-80 ■ Pressure resistance: Up to 10 kg/cm² (static pressure) ■ Maximum usable temperature: 60℃ *For more details, please refer to the PDF document or feel free to contact us.

• Other measurement, recording and measuring instruments

This model is a simplified version of the "ST type (vertical multi-purpose type)" and is a mass-produced instrument specifically prepared for measuring clean water. Due to its shape, it features the capability for both flange mounting and screw union connection (except for SPT-15). 【Specifications (excerpt)】 ■ Application: General clean water measurement ■ Manufacturing diameters: 1/2″, 3/4″, 1″, 2″, etc. ■ Model numbers: SPT-15 to SPT-50 ■ Pressure resistance: Maximum 5 kg/cm² to 10 kg/cm² (static pressure) ■ Maximum usable temperature: 60℃ *For more details, please refer to the PDF document or feel free to contact us.

• Other measurement, recording and measuring instruments

Existing sensors and devices with 4-20mA outputs can be easily retrofitted for IoT functionality. - If you use the WiFi available within your company, there are no communication costs. *Note: Cloud usage fees are separate.* - If there is no WiFi environment available in factories or similar locations, you can use commercially available LTE modems. - The data transfer interval and average value calculations can be customized. - We also accept orders for the supply of the main unit without cloud services, allowing integration into your devices. ☆ We also accept contracts for circuit and IoT device development.

• Circuit board design and manufacturing

It can operate continuously for over six months on AA batteries, making it usable in locations without AC power. (Operation with AC power is also possible with an optional AC adapter.) User-configurable thresholds allow for abnormal condition detection. In case of an anomaly, it will notify you with LED indicators and alarm sounds. (It also has external output terminals for alarms.) We have adopted an LCD with a backlight, so measurements can be read even in dark places. (When operating on batteries, the backlight stays on for 5 seconds after operation; when using the AC adapter, the backlight remains on continuously.)

• Pure water production equipment

This model is a representative type of area flow meter and is a general-purpose instrument with high accuracy. Additionally, due to its shape, it is possible to apply various linings to the liquid contact parts of the inlet and outlet pipes. 【Specifications (excerpt)】 ■ Applications: For measuring transparent fluids and gases (Capable of measuring strong acidic, alkaline liquids, organic solvents, etc.) ■ Manufacturing diameter: 1/4″ to 12″ ■ Model numbers: ST-8 to ST-300 ■ Pressure resistance: Maximum 10 kg/cm² to 30 kg/cm² (static pressure) *For more details, please download the PDF or feel free to contact us.

• Other measurement, recording and measuring instruments

By connecting your company's products to the internet, we will enable data transmission and storage to the cloud, as well as visualization from remote locations and email notifications in case of abnormal conditions. We can support multiple communication methods (such as 4G/WiFi). There are also low-cost communication options (like Sigfox), so we will make suggestions based on your needs. If you have products that you would like to IoT-enable, please feel free to consult with us.

• Circuit board design and manufacturing