サンケイ工業 List of Products and Services

The "Steel Cover (Telescopic Cover)" is a product primarily used to protect the sliding surfaces of machine tools and similar equipment. It is particularly effective in handling chips, cutting oil, and coolants. Additionally, the contact area with the sliding surface uses slide shoes or rollers. 【Features】 ■ Effective under harsh conditions where large amounts of chips and high-temperature debris are generated ■ SUS versions can be produced if coolant type or aesthetics are a priority ■ For high-speed applications, pantograph mechanisms and cushions can also be used ■ Consideration can also be given based on existing samples *For more details, please refer to the PDF materials or feel free to contact us.

• Assembly Jig

The "Foldable Accordion Type" is a product used to protect the sliding surfaces of machines such as flat beds, cross rails, and columns. It can be manufactured using materials that excel in dust resistance, oil resistance, water resistance, and heat resistance. Additionally, in cases of large strokes, rollers and bearings are used, and for regulating expansion and contraction, mechanisms such as stays & springs, pantograph mechanisms, and limit tape methods are adopted. 【Features】 ■ Products with excellent expansion rates and low-cost options can also be manufactured. ■ For large strokes, rollers and bearings are utilized. ■ Mechanisms such as stays & springs, pantograph mechanisms, and limit tape methods are employed. ■ As it is made to order, we respond from the design stage, including design and manufacturing. *For more details, please refer to the PDF materials or feel free to contact us.

• Other safety and hygiene products

The "Rectangular Sewing Bellows" is a product used to protect the sliding surfaces of machines such as flat beds, cross rails, and columns. It can be manufactured using materials that excel in dust resistance, water resistance, oil resistance, and heat resistance. Additionally, for applications with large strokes, rollers and bearings can be used, and mechanisms such as stays & springs, pantograph mechanisms, and limit tape methods are employed to regulate expansion and contraction. 【Features】 - It is possible to manufacture using urethane sheets or static-resistant urethane sheets. - Products with excellent elasticity and low-cost options can also be produced. - As it is made to order, we can accommodate from the design stage, including design and manufacturing. *For more details, please refer to the PDF materials or feel free to contact us.

• Other safety and hygiene products

The "bellows for linear guides" is used for dust protection, oil resistance, water resistance, and safety covers for linear guides. Materials can be selected from options such as dust-proof, oil-resistant, water-resistant, and heat-resistant, and it is also possible to use urethane sheets and anti-static urethane sheets. This product is made to order, so we will respond from the design stage and carry out the design and manufacturing. 【Features】 ■ Manufacturing methods include square sewn type, square folded type, and urethane welded type ■ Materials can be selected from dust-proof, oil-resistant, water-resistant, and heat-resistant options ■ Urethane sheets and anti-static urethane sheets can also be used ■ For larger strokes, a sliding plate can be installed in the middle *For more details, please refer to the PDF materials or feel free to contact us.

• Other safety and hygiene products

The "cylindrical bellows" is a product used to protect rods, shafts, spline shafts, screw shafts, etc., and may also be used for air ducts, exhaust ducts, and the transportation of powders and liquids. Regarding materials, it is possible to manufacture using materials that excel in dust resistance, oil resistance, water resistance, and heat resistance. This product is made to order, so we will respond from the design stage and handle the design and manufacturing. 【Features】 ■ Manufactured with a ring inside the body to maintain its shape ■ Can be manufactured using materials that excel in dust resistance, oil resistance, water resistance, and heat resistance ■ Urethane sheets and anti-static urethane sheets can also be used ■ Made to order, so we will respond from the design stage and handle the design and manufacturing *For more details, please refer to the PDF document or feel free to contact us.

• Other safety and hygiene products

The "cylindrical sewn bellows" is a product used to protect rods, shafts, spline shafts, screw shafts, and the like. The material is cut into a disc shape and sewn with valleys and peaks to create the product. Since a die is used for cutting, there is flexibility in the shape, and it is not limited to circular forms. Additionally, a two-part type that can be installed and removed later can also be manufactured. 【Features】 ■ Can be produced using materials that excel in dust resistance, oil resistance, water resistance, and heat resistance ■ For larger strokes, intermediate plates or frames can be installed in the middle ■ Made to order, allowing for design and production from the planning stage *For more details, please refer to the PDF materials or feel free to contact us.

• Other safety and hygiene products

The "urethane welded bellows" is a product used to protect rods, shafts, spline shafts, screw shafts, and sliding surfaces. Urethane sheets are cut into desired shapes and then processed through welding. The materials used are translucent or green urethane sheets, as well as static-resistant translucent urethane sheets. 【Features】 ■ Excellent dust-proof, oil-resistant, water-resistant, and abrasion-resistant properties ■ Generates minimal dust ■ Made to order, allowing for design and production from the planning stage *For more details, please refer to the PDF document or feel free to contact us.

• Other safety and hygiene products

The "Lifter/Materiel Handling Bellows" is a product primarily used as a safety cover to prevent accidents caused by pinching. There are various manufacturing methods, including square fold type, cylindrical (ring type), and square sewn type, with materials selected from various sheets according to the application and purpose. For installation methods, there are flange types via brackets and hook-and-loop fasteners, among others. 【Features】 ■ Material selection from various sheets according to application and purpose ■ Made to order, allowing for design and manufacturing from the planning stage *For more details, please refer to the PDF materials or feel free to contact us.

• Other safety and hygiene products

This product line is used for connection points in various plants, piping equipment, and machinery. It is used for the transportation of various fluids and for absorbing vibrations and displacements. The materials are selected from various sheets and canvas fabrics according to the purpose and application, and the combination of different materials and the number of layers (plies) are determined based on the requirements. [Features] ■ Materials are selected from various sheets according to the purpose and application. ■ Made to order, allowing for design and production from the design stage. *For more details, please refer to the PDF document or feel free to contact us.

• Assembly Jig

We would like to introduce the "Screw Cover" handled by Sankei Kogyo Co., Ltd. Our company measures the D2 (outer diameter) dimension at the maximum state (when in close contact) and the D1 (inner diameter) dimension at the minimum state (when in effective working length). If you provide us with the screw/shaft diameter, effective working length, allowable close contact length, allowable outer diameter of the large diameter section, vertical/horizontal usage conditions, and usage status, we will submit the appropriate dimension products and approval drawings for the jig dimensions. 【Features】 ■ Outer diameter error of the large diameter section = (-)0 to 3 m/m ■ Outer diameter error of the small diameter section = (+)0 to 2 m/m ■ Change in dimensions of large and small diameters during expansion = 0 to 3 m/m *For more details, please refer to the PDF document or feel free to contact us.

• Assembly Jig

We would like to introduce the "Wiper" that we handle. The material is molded from polyurethane rubber, and it is used to remove dust by being directly attached to the sliding surface to protect it. Please feel free to consult us when you need assistance. 【Features】 ■ Directly attached to the sliding surface ■ Molded from polyurethane rubber *For more details, please refer to the PDF materials or feel free to contact us.

• Assembly Jig

We can accommodate inquiries ranging from general dust and waterproof applications to special applications such as heat resistance. Additionally, it is also adopted to prevent injuries to workers.

• Other machine elements

We will select and propose shapes and materials that suit the intended use and surrounding environment.

• Other machine elements

This catalog features the "Bellows" from Sankei Kogyo Co., Ltd. It includes various types of bellows for different applications, such as the 'SA type' used in flat bed configurations, the 'SB type' used in vertical column configurations, and the 'SO type' used for covers or ducts, joints, etc., for screws, spindles, shafts, and cylinder shafts. [Contents] ■ Bellows sheets ■ Cylindrical bellows ■ Rectangular bellows ■ Rectangular steel bellows ■ Plate-type covers, etc. *For more details, please download the PDF or feel free to contact us.

• Other machine tools
• Contract manufacturing
• Mechanical Design