エフ・アイ・テック List of Products and Services

Due to the discontinuation of Triflow, which has received broad support until now, the original retailer of Triflow has developed an alternative/successor lubricant. By incorporating PTFE (fluororesin), which has the lowest wear coefficient among all solid lubricants, and by having micronized PTFE adhere to the uneven surfaces of metals, it exhibits excellent lubrication effects. We have successfully localized PTFE (fluororesin) using the latest technology to eliminate regulated substances, and we have also successfully localized a special base oil from scratch. The product has been completed as one that can transition seamlessly from Triflow in terms of lubrication performance, user experience, and durability, and it has achieved results equal to or better than Triflow in tests such as TIMKEN and the Sota-type four-ball method. Many users have already transitioned from Triflow to PT Flow, and we have received a high repeat order rate. We also sell in small quantities, so it is possible to place a test order.

• Lubricants

The "Fitec Tester FT-01V (Vertical Type)" is a compact micro indentation hardness tester characterized by its user-friendly operation that anyone can use. It features a robust design for portability and allows for automatic hardness measurement as a module. It is suitable for measuring the HM hardness of materials such as resins and coated films. In addition, we are also developing the "Fitec Tester FT-01H (Horizontal Type)." 【Features】 ■ Well-suited for measuring the HM hardness of resins and coated films ■ Robust design for portability ■ User-friendly operation - Connects to a computer (USB connection) - Air measurement (once a day) - Set the sample, input the measurement load, and start measuring *For more details, please refer to the PDF document or feel free to contact us.

• Other measurement, recording and measuring instruments

The "DUALSCOPE MPOR-FP" is an ultra-compact film thickness gauge with an integrated probe that is 80 cm long. It retains the ease of use of the MPOR, and since the probe is integrated, it can easily measure areas that were difficult to reach with built-in probe types. The probe tip features a V-shaped groove, allowing for measurements of cylindrical specimens such as pipes. 【Features】 ■ Easy measurement even in hard-to-reach areas ■ The V-shaped groove at the probe tip enables measurement of cylindrical specimens ■ Measurement values can be stored up to 10,000 entries even after the power is turned off ■ Measurement values can be sent to an Excel spreadsheet using PC-DATEX, among other features *For more details, please download the PDF or contact us.

• Coating thickness gauge

The "DUALSCOPE MPOR" is a super compact thickness gauge designed for ease of use, allowing even first-time users to easily perform measurements. It is designed to measure the thickness of coatings and plating on iron substrates such as ships, bridges, tanks, plants, large vehicles, and buildings, as well as insulating coatings on non-metals like aluminum and copper, including paints, lacquers, and plastic coatings. 【Features】 - Zero point correction and calibration can be operated with one hand - The main unit weighs only 137 kg and is pocket-sized - Measurement values can be stored up to 10,000 entries even after the power is turned off - Using PC-DATEX, measurement values can be sent to an Excel spreadsheet, etc. *For more details, please download the PDF or contact us.

• Coating thickness gauge

The "DUALSCOPE MPOR/DUALSCOPE MPOR-FP" is an ultra-compact thickness gauge that allows for easy measurement of film thickness (coating thickness). Its small and lightweight design allows it to fit in a work uniform pocket, making it suitable for measurements while on-site. Additionally, the large front and top displays enable thickness readings from any measurement position. Furthermore, with a blue backlight, it offers excellent visibility even in dark working environments. 【Features】 ■ Automatic statistical function ■ Adjustable upper/lower limit settings ■ Easy-to-read digital display on two screens ■ Convenient pocket size for portability on the job site, etc. *For more details, please download the PDF or contact us.

• Coating thickness gauge

The ultra-micro indentation hardness testing machine 'ENT-NEXUS' is a hardness tester capable of simultaneously mounting two measurement units. It allows for a variety of measurements through high-load and low-load units. The high-load unit covers a wide load range starting from 5μN, enabling measurements of various samples, while the low-load unit supports reproducible high-precision testing with an indentation depth of 10nm. Additionally, it is a hardness testing machine compliant with ISO 14577-1/JIS Z 2255, and being a domestic manufacturer, it offers quick response in case of malfunctions. 【Details】 ■ Compliant with ISO 14577-1/JIS Z 2255 testing standards ■ Capable of simultaneously mounting two measurement units ■ Allows for a variety of measurements through high-load and low-load units ■ The high-load unit covers a wide load range starting from 5μN ■ Quick response in case of malfunctions due to being a domestic manufacturer, etc. *For more details, please download the PDF or contact us.

• Other measurement, recording and measuring instruments
• Testing Equipment and Devices

The "CT-3" is an electrolytic thickness gauge capable of precise thickness measurement for various types of plating. It is suitable for measuring thin plating below 1μm, thick plating above 20μm, and multilayer plating with three or more layers. The gauge uses an electrolyte tailored to the plating metal and dissolves a specific area with a constant current, measuring the plating thickness based on the time taken for dissolution. It complies with standards such as JIS, ASTM, MIL, ISO, and DIN, and is an internationally certified measuring instrument in collaboration with the American company Cochrane. 【Features】 ■ Lightweight and compact body ■ Standard equipped with A, B gaskets and C gasket range ■ Active function allows for smooth measurement of slightly participating samples ■ Measurement possible from any plating range, among others *For more details, please download the PDF or contact us.

• Coating thickness gauge

【We accept inquiries for sample measurements and demo room arrangements】 ENT-NEXUS offers a wide range of advanced measurements due to its extremely high measurement capability and rich options with selectable units. The measurement software is designed for easy operation, contributing to reducing the burden on operators. 【Main Features】 - Automatic measurement through coordinate and condition registration - Standard equipped with an active vibration isolation table - Temperature management within the shielded case at ±0.1℃, achieving high data reproducibility - Modular design allows for unit replacement during inspections and other situations - Numerous implementation records with government agencies and major manufacturers

• Strength Testing Equipment

The "FERITSCOPE(R) FMP30" is a ferrite scope that can measure the ferrite content of austenitic steel and duplex steel using electromagnetic induction. By simply placing the probe on the surface of the sample, it records and displays the measurement values, allowing for easy measurement of welded joints in austenitic coatings and stainless steel pipes, as well as containers and boilers. 【Features】 - Easy and quick measurements - Capability to measure welding strength - Measurements can be taken immediately after powering on - Can measure the ferrite content of austenitic steel and duplex stainless steel - Non-destructive measurement of ferrite content in the range of 0.1–110FN or 0.1–80Fe%, etc. *For more details, please download the PDF or contact us.

• Other measurement, recording and measuring instruments

The "ENT-NEXUS" is a nanoindentation (ultra-micro indentation hardness) testing machine that complies with ISO 14577-1/JIS Z 2255. The high-load unit can conduct tests ranging from 5μN to 2N. It is suitable for hardness testing of a wide range of materials, from metals to polymers. The low-load unit accommodates tests from 0.5μN to 10mN, enabling testing of ultra-thin films below 100nm. Both units can be easily swapped with simple tasks, and maintenance during failures is also straightforward. 【Features】 ■ Supports tests in accordance with ISO 14577-1/JIS Z 2255 ■ Offers a wide range of options including viscoelastic testing, heating tests, and electrical resistance tests ■ Quick response for failures due to being a domestic manufacturer ■ Easy to replace with simple tasks and maintenance is straightforward, etc. *For more details, please download the PDF or contact us.

• Other measurement, recording and measuring instruments
• Testing Equipment and Devices

The "ENT-NEXUS" is a micro-indentation hardness testing machine equipped with a high-precision active vibration isolation table as standard. With high data reproducibility, the "ENT-NEXUS" minimizes the impact of thermal drift on measurements by controlling the temperature within the shielded case to ±0.1°C. Additionally, low thermal expansion materials are used for key components, including the stage, enabling highly reproducible measurements. 【Features】 ■ Standard equipped with a high-performance active control vibration isolation table ■ Stable measurements possible even in high-vibration environments ■ Temperature controlled to ±0.1°C within the shielded case ■ Enables highly reproducible measurements, among others *For more details, please download the PDF or contact us.

• Other measurement, recording and measuring instruments
• Testing Equipment and Devices

The "ENT-NEXUS" is an ultra-micro indentation hardness testing machine that enables a wide range of measurements through high-load and low-load units. The high-load unit covers a broad load range from 5μN and can measure various samples, while the low-load unit supports reproducible high-precision tests with an indentation depth of 10nm. Both units can be easily swapped with simple operations, and maintenance during failures is also straightforward. 【Features】 ■ Capable of simultaneously mounting two measurement units ■ Enables diverse measurements with high-load and low-load units ■ High-load unit covers a wide load range from 5μN ■ Low-load unit supports reproducible high-precision tests with an indentation depth of 10nm, among others *For more details, please download the PDF or contact us.

• Other measurement, recording and measuring instruments
• Testing Equipment and Devices

The "ENT-NEXUS" is an ultra-micro indentation hardness testing machine capable of simultaneously mounting two measurement units. It allows for a wide range of measurements thanks to the high-load and low-load units. The high-load unit can perform nanoindentation tests on a variety of materials, from metal materials such as plating and hard coatings to DLC and resin materials. The low-load unit provides excellent repeatability and stability for measurements of soft materials and for indentation depths of 10 nm or less. 【Features】 ■ Capable of simultaneously mounting two measurement units ■ A wide range of measurements possible with high-load and low-load units ■ With the low-load unit option, surface force measurements acting between two objects can be performed ■ Free combination of frame and units, etc. *For more details, please download the PDF or contact us.

• Other measurement, recording and measuring instruments
• Testing Equipment and Devices

The "FMP10/FMP20/FMP30/FMP40" is a film thickness gauge that achieves high-precision non-destructive film measurement through a probe exchange method. This product is highly versatile and user-friendly, catering to various demands such as quality control in manufacturing processes, random inspections of incoming goods, and full inspections of all items. It features a modular design, allowing users to select the main unit and probe according to specific measurement specifications. Additionally, thanks to innovative probe technology, it offers high precision, a large measurement range, and the ability to handle complex shaped samples. 【Features】 - Non-destructive film thickness measurement using either electromagnetic or overcurrent methods, or both. - Automatic recognition of substrate materials and probe types. - A robust housing that incorporates a large display with high contrast. - Numerous options available for a wide range of inspections. - FMP30 and FMP40 can be connected to external PCs and printers via USB. *For more details, please refer to the PDF document or feel free to contact us.

• Other measurement, recording and measuring instruments

The "FERITSCOPE(R) FMP30" measures the ferrite content of austenitic and duplex steels using an electromagnetic induction method. By simply placing the probe on the surface of the sample, measurement values are recorded and displayed. The probe can also measure in hard-to-reach areas. To easily locate the weld seams of surface-polished areas, you can use the "continuous display" feature. 【Features】 ■ Easily inspect whether mechanical properties and corrosion resistance are compromised ■ High-precision measurement of ferrite content made simple ■ Equipped with a "continuous measurement and recording" function ■ Capable of creating a ferrite content profile of weld seams ■ Measurement data can be transferred to a PC via Bluetooth or cable for evaluation *For more details, please refer to the PDF document or feel free to contact us.

• Other measurement, recording and measuring instruments

We would like to introduce our ultra-compact thickness gauge, the 'DUALSCOPE MPOR/DUALSCOPE MPOR-FP'. The "DUALSCOPE MPOR" is not only ultra-compact but also designed for excellent operability, making it easy for first-time users to perform measurements with this probe-integrated device. The "DUALSCOPE MPOR-FP" features a probe type measurement device with an integrated 80cm probe, allowing for easy measurement in hard-to-reach areas. 【Features】 ■ Pocket-sized for convenient portability on the job site ■ Automatic power-off function ■ Easy-to-read digital display on two screens ■ Automatic statistical function ■ Adjustable upper/lower limit settings *For more details, please refer to the PDF document or feel free to contact us.

• Coating thickness gauge

The "ENT-NEXUS" adopts a modular configuration that allows for free combinations of frames and units, making it a micro-indentation hardness testing machine capable of various measurements, including nanoindentation tests and surface force measurements. Measurement units tailored to specific purposes, such as high-load units and low-load units, can be mounted on the NEXUS frame (stand). During maintenance, it supports unit-by-unit replacement, minimizing the equipment's downtime. 【Features】 ■ Modular configuration ■ Nanoindentation testing ■ Indenter tip correction method ■ Excellent operability ■ High data reproducibility ■ Surface force measurement *For more details, please refer to the PDF document or feel free to contact us.

• Other measurement, recording and measuring instruments
• Testing Equipment and Devices

The "FISCHERSCOPE(R) HM2000 series" is a groundbreaking hardness testing machine that provides a wide range of applications and obtains hardness and valuable physical property data with high precision. It quickly and accurately evaluates mechanical properties such as bulk elasticity and plasticity. Indentation tests compliant with ISO 14577 can be performed by anyone. Additionally, it can meet the demanding measurement requirements of research and industrial applications, with measurement procedures fully automated, making it suitable for continuous testing. 【Features】 ■ Acquires a wide range of related physical property data, including the physically significant hardness values HM and HU ■ Applicable to various materials and very thin coatings ■ No operator-induced errors ■ Testing is automated, and results are processed by computer, making it economical *For more details, please download the PDF or feel free to contact us.

• Strength Testing Equipment
• Other measurement, recording and measuring instruments
• Testing Equipment and Devices