無錫市艾可密封技術 List of Products and Services

Usage Conditions Fluid: Water Temperature Range: -30℃ to 121℃ Maximum Pressure: 1.1 MPA Maximum Rotational Speed: 100 R/MIN Features - Half-embedded in the bearing bracket, making it easy to remove on-site; - Balanced mechanical seal structure, achieving long service life; - Selection of silicon carbide seals, strong against sludge; - Allows for the replacement of the seal unit on the production site, reducing maintenance costs by 60%; - Multi-spring structure, providing sufficient corrective spring force; - Floating design, capable of absorbing vibrations within ±0.5MM range of the spindle head; - Axial cooling roll thermal expansion correction of up to 10MM is possible; - Main material is stainless steel, ensuring long-term stability in water environments.

• Pipe Fittings

The RF/DF type mechanical chuck is equipped with three wide slide plates on the body. The cam structure presses the slide plates against each other, and the protruding slide plates secure the workpiece. Features: - Non-axial design reduces the time for winding and unwinding operations; - Because the chucking is surface contact, it guarantees a reliable grip with the same thrust; additionally, the use of slide plates makes it less likely for the workpiece to be damaged; - The surface of the slide plates has bumps, which enhances the chucking; - The cam structure provides gripping force through its own weight; - No lubrication is required, and it features low friction; - The main shaft is made of alloy steel, expanding the load range.

• Pipe Fittings

The JF type mechanical chuck is equipped with three wide slide plates on the body. After setting the core, the thrust generated when the chuck mounting part of the device advances causes the lugs to protrude, gripping the core.

• Pipe Fittings

Usage Conditions Fluid: Operating oil and other fluids Temperature Range: -30℃ to 80℃ Maximum Pressure: 30 MPA Maximum Rotational Speed: 6500 R/MIN Features - Supported by two large precision ball bearings, allowing for smooth rotation, and the bearings are maintenance-free; - High-speed and high-pressure seal structure, with no wear from contact of the sealing ring, ensuring long-term rotation without failure; - The rotational torque is relatively low; - Adopts a special structure, resulting in minimal wear heat during high-speed rotation; - Pressure and temperature do not affect the rotational torque; - Wide range of rotational speeds, capable of a maximum speed of 6500; - The design of the outlet prevents the impact on the surrounding environment caused by the reel; - Customization is possible according to customer requirements.

• Pipe Fittings

Usage Conditions Fluids: Hydraulic oil, water, and other fluids Temperature Range: -30℃ to 80℃ Maximum Pressure: 30 MPA Maximum Rotational Speed: 1500 R/MIN Features - Supported by two large precision ball bearings, allowing for smooth rotation, and the bearings are maintenance-free; - Utilizes imported specialized sealing components for long service life; - Made with a stainless steel loose core treated for excellent wear resistance; - Body materials available in aluminum alloy, stainless steel, or copper alloy; - Customization is possible according to customer requirements.

• Pipe Fittings

Usage Conditions Fluid: Water Temperature Range: -30℃ to 120℃ Maximum Pressure: 2.5MPA Maximum Rotational Speed: 1500R/MIN Features - Supported by precision bearings, no lubrication is required. - A set of small springs provides stable spring force. - Adopts a seal surface structure that is resistant to sludge. - To prevent corrosion of bearings caused by leaks due to vertical installation, a labyrinth waterproof seal design is employed.

• Pipe Fittings

Usage Conditions Temperature Range: -30℃ to 250℃ Maximum Pressure: 5MPA Maximum Rotational Speed: 10R/MIN Features - Supported by a ball seal ring, allowing for a swing range of up to ±0.5MM. - Resistant to vibrations and thermal shock. - Maintenance-free.

• Pipe Fittings

Usage Conditions Temperature Range: -30℃ to 121℃ Maximum Pressure: 35MPA Maximum Rotational Speed: 20R/MIN Features - Supported by bearings, with low rotational torque; - Uses stainless steel rotors with special treatment for good wear resistance; - Equipped with AIKE's exclusive sealing rings for long lifespan; - Pre-filled with imported bearing grease, eliminating the need for maintenance; - Several coupling methods for the rotary joint, making it suitable for complex environments; - Easy to repair and highly stable.

• Pipe Fittings

Operating conditions Fluid: Water Temperature range: -30℃ to 121℃ Maximum pressure: 1.1 MPa Maximum rotational speed: 100 R/MIN

• Pipe Fittings

Usage Conditions Fluid: Steam Temperature Range: -30℃ to 235℃ Maximum Pressure: 1.1 MPa Maximum Rotational Speed: 800 R/MIN Features - A rotary joint specifically designed for high-speed paper machines in the paper industry; - The special design of the seal increases strength to four times that of a standard seal ring; - An adjustable device for the height of the siphon suction nozzle dedicated to PS, allowing precise adjustment of the distance between the suction nozzle and the bowl wall; - The spring can be replaced individually, making repairs easy.

• Pipe Fittings

Usage Conditions Fluid: Steam Temperature Range: -30℃ to 220℃ Maximum Pressure: 1.6MPA Maximum Rotational Speed: 400R/MIN Features - Stable installation; - Special design of the seal, with strength four times greater than that of ordinary sealing rings; - Fixed inner tube with a locking device that enhances strength to avoid twisting or breaking; - Maintenance-free, no lubrication required, easy to repair.

• Pipe Fittings

Usage Conditions Fluid: Heat transfer oil Temperature Range: -30℃ to 355℃ Maximum Pressure: 3.5MPA Maximum Rotational Speed: 450R/MIN Features - Special design of seals, with strength four times greater than ordinary sealing rings; - Selection of dry bearings improves stability during rotation, making it suitable for equipment with relatively high vibrations; - Reduces sludge volume and extends the lifespan of the rotary joint; - Utilizes high-temperature resistant alloy springs and anti-antimony ball sealing rings, allowing for long-term use in high-temperature environments; - Maintenance-free, no lubrication required, and easy to repair.

• Pipe Fittings

Usage Conditions Fluid: Steam Temperature Range: -30℃ to 220℃ Maximum Pressure: 3.5MPA Maximum Rotational Speed: 450R/MIN Features - Special design of the seal, with strength four times greater than that of ordinary seal rings; - Selection of dry bearings that are resistant to steam, improving stability during rotation, making it suitable for equipment with relatively high vibration; - Reduction of sludge volume, extending the lifespan of the rotary joint; - Maintenance-free, no lubrication required, easy to repair.

• Pipe Fittings

Usage Conditions Fluid: Air, Water, Hydraulic Oil Temperature Range: -30℃ to 250℃ Maximum Pressure: Air, Water: 1.1MPA Hydraulic Oil: 7MPA Maximum Rotational Speed: 3000R/MIN Features - Multi-flow mechanical seal structure, suitable for high-speed rotating equipment; - Multiple spring structure provides stable sealing force at the sealing part; - Balanced mechanical seal structure extends lifespan; - It is possible to check for leaks and wear conditions through the viewing window installed on the body.

• Pipe Fittings

Usage Conditions Fluid: Heat transfer oil Temperature Range: -30℃ to 230℃ Maximum Pressure: 1.1MPA Maximum Rotational Speed: 2000R/MIN Features - Structure with multiple springs provides stable sealing force at the sealing part. - Balanced mechanical seal structure extends lifespan. - Uses two large precision ball bearings for stability during rotation. - Special spacer design prevents high temperatures from being directly transmitted to the bearings, extending their lifespan. - It is possible to check for leaks and wear conditions through a viewing port installed on the body.

• Pipe Fittings

Usage Conditions Fluid: Water, Air Temperature Range: -30℃ to 120℃ Maximum Pressure: 1.1 MPA Maximum Rotational Speed: 3000 R/MIN Features - The seal can be replaced individually, making repairs easy; - Uses two large precision ball bearings for stability during rotation; - Balanced mechanical seal structure extends lifespan; - The standard seal material is a combination of silicon carbide and wear-resistant graphite, achieving long life; - The end cap and rotor are made of 304 stainless steel, providing exceptional durability.

• Pipe Fittings

Usage Conditions Fluid: Air, Water Temperature Range: -30℃ to 120℃ Maximum Pressure: 1.1MPA Maximum Rotational Speed: 3000R/MIN Features - Uses two large precision ball bearings for stability during rotation. - Balanced mechanical seal structure extends lifespan; standard products use aluminum alloy for the body and stainless steel for the rotor, but SUS316L stainless steel can be used upon special request. - The seal can be replaced individually, making repairs easy.

• Pipe Fittings