加賀鉄工所 List of Products and Services

The "Cross Metal N Parallel Use" is a fitting that can fix two pipes in parallel using a wedge. By replacing the conventional cross metal wedge with a parallel wedge, you can secure them in parallel. The installation method involves hooking the tip of the wedge onto the main body, raising the wedge while passing the main body through the groove of the wedge, and after inserting the wedge, driving it in with a hammer or similar tool. 【Features】 ■ Fixes two pipes in parallel with a wedge ■ Installation Method 1. Hook the tip of the wedge onto the main body 2. Raise the wedge while passing the main body through the groove of the wedge 3. After inserting the wedge, drive it in with a hammer or similar tool *For more details, please refer to the PDF document or feel free to contact us.

• joint
• Piping Materials

The "Top Metal Terminal" is a fitting that secures the external joint at the top of the pipe house and the straight pipe in a staggered T-shape. It can also be used as a T-band, so for small diameter houses (pipe diameter up to about 25.4mm), conventional T-bands (screw type) can be used for installation, but this type of T fitting is suitable for larger diameter houses. Additionally, the terminal cap is made of stainless steel 304 because the cut surface of the straight pipe, which does not have plating, is prone to rust. 【Features】 ■ Fixes the external joint (30 degrees) and pipe in a staggered T-shape ■ Suitable for large diameter houses ■ Terminal cap made of stainless steel 304 for rust prevention ■ Made to order *For more details, please refer to the PDF document or feel free to contact us.

• joint
• Piping Materials

"Top Metal K" is a fitting that secures the outer joint (30 degrees) at the top of the pipe house and the straight pipe in a cross shape. Unlike conventional products, this product allows the wedge to be driven in at a 15-degree angle. Additionally, the shape is designed so that the tip of the wedge does not easily hit the outer joint when driven in. 【Features】 ■ Wedge can be driven in at a 15-degree angle ■ Secures the outer joint at the top of the pipe house and the straight pipe in a cross shape ■ The inclination angle of the outer joint is 30 degrees ■ The shape makes it difficult for the tip of the wedge to hit the outer joint ■ Improved workability *For more details, please refer to the PDF document or feel free to contact us.

• joint
• Piping Materials

The "Top Metal" is a fitting that secures the outer joint at the top of the pipe house and the straight pipe in a cross shape. To prevent the vinyl from tearing, the gap between the outer joint and the bend of the main body is minimized. Additionally, the top metal wedge is designed for easy driving with a hammer or similar tool. 【Features】 ■ Secures the outer joint and straight pipe in a cross shape ■ The inclination angle of the outer joint is 30 degrees ■ The gap between the outer joint and the bend of the main body is small ■ The top metal wedge is shaped for easy driving with a hammer or similar tool ■ Material uses thick plating with a JIS standard Z27 and a plating adhesion of 360g or more *For more details, please refer to the PDF document or feel free to contact us.

• joint
• Piping Materials

The "Cross Metal N Terminal" is a fitting that secures two pipes in a staggered cross shape (T-shape). It can be used to connect the arch pipe and the straight pipe at the terminal part of the pipe house (gable side) as a staggered T-band. For small diameter houses (pipe diameter up to about 25.4mm), conventional T-bands (screw type) can be used, but for larger diameter houses, this type of T fitting is more suitable. Additionally, the terminal cap is made of stainless steel 304 because the cut surface of the straight pipe, which does not have plating, is prone to rust. 【Features】 ■ Fixes two pipes in a staggered cross shape (T-shape) ■ Suitable for large diameter houses ■ Terminal cap made of stainless steel 304 for rust prevention ■ Made to order *For more details, please refer to the PDF document or feel free to contact us.

• joint
• Piping Materials

The "Cross Metal T" is a fitting that secures two pipes in a cross shape. The material used is thick plating with a coating weight of 360g or more, compliant with JIS standard Z27. Additionally, this product enhances strength by increasing the height of the wedge, making it suitable for larger-sized pipes on the straight pipe side. It features reinforcing ribs and temporary fixing protrusions on the main body. 【Features】 ■ Fixes two pipes in a cross shape ■ Material is thick plating with a coating weight of 360g or more, compliant with JIS standard Z27 ■ Strength is enhanced by increasing the height of the wedge ■ Suitable for larger-sized pipes on the straight pipe side ■ Features reinforcing ribs and temporary fixing protrusions on the main body *For more details, please refer to the PDF document or feel free to contact us.

• joint
• Piping Materials

The "Cross Metal (Single Wedge Type)" is a single wedge type cross fitting that secures two pipes in a cross shape. The material used is a thick plating with a coating weight of over 360g, compliant with JIS standard Z27. The main body has a protruding section, which increases strength by supporting the straight pipes with this protruding section and the wedge, allowing for a shorter wedge. 【Features】 ■ Single wedge type ■ Secures two pipes in a cross shape ■ Material is thick plating with a coating weight of over 360g, compliant with JIS standard Z27 ■ Increased strength by supporting straight pipes with the main body protruding section and the wedge ■ Main body includes reinforcing ribs and temporary fixing protrusions *For more details, please refer to the PDF document or feel free to contact us.

• joint
• Piping Materials

The "Cross Band" is a fitting that secures two pipes in a cross shape using wire. The Cross Band specifications are available in various types depending on whether they are post-plated, pre-plated, and the wire diameter. Post-plating involves applying plating to the processed surfaces and ends of the product after the wire has been shaped (bent, heat-treated, etc.), making it resistant to rust. Pre-plating refers to using materials that have been plated beforehand to create the product, resulting in fewer processing steps and lower costs. Additionally, we also offer the "Brace Band," which secures two pipes with wire in a bracing configuration. 【Features】 ■ Cross Band - Secures two pipes in a cross shape using wire - Specifications include post-plated, pre-plated, and wire diameter ■ Brace Band - Secures two pipes with wire in a bracing configuration *For more details, please refer to the PDF document or feel free to contact us.

• Other machine elements
• joint
• Piping Materials

"UNIQLOs" is a fitting that fixes two pipes in a cross shape within a range of 90° to ±30°. Since the main body and the sliding part are integrated, the workability during installation is improved. It can also be used for houses on sloped land and in bracing sections. The material used is thick plating with a coating weight of over 360g, compliant with JIS standard Z27. 【Features】 ■ Fixes two pipes in a cross shape within a range of 90° to ±30° ■ Main body and sliding part are integrated ■ Improved workability during installation ■ Usable for houses on sloped land and in bracing sections ■ Material is thick plating with a coating weight of over 360g, compliant with JIS standard Z27 *For more details, please refer to the PDF document or feel free to contact us.

• Other machine elements
• joint
• Piping Materials