東京陶芸器材 List of Products and Services

The "TY-S Series" is a cart-type electric kiln with a floor that serves as a cart, allowing for the easy loading and unloading of works by pulling it out towards the front. You can check the loading condition of the kiln from the front, back, and sides of the cart, making it very effective for large works or when dealing with a large number of items. A "sand seal" made of silica sand is provided in the gap between the kiln body and the cart to prevent heat loss. Additionally, the power supply to the cart heater uses metal connectors to prevent contact failure during insertion and removal. 【Features】 ■ Wall thickness of 205mm ■ Rotating door ■ Suitable for loading a large number of works or large items ■ The bottom of the cart is insulated with a sand seal ■ Metal connectors are used for the wiring of the cart *For more details, please refer to the PDF materials or feel free to contact us.

• Electric furnace

The "TY-SD Series" is a door-type electric furnace with a wall thickness of 186mm. By opening and closing the front door, loading from the front allows for easy handling of large works without the need to bend down. The furnace wall consists of 180mm of fireproof insulating bricks and 6mm of silica board, totaling 186mm, while the ceiling is insulated with arch bricks and ceramic fiber. 【Features】 ■ Improved workability with front loading ■ Arch bricks are used for the ceiling, preventing sagging like ceramic boards ■ The front door is securely welded to a pipe with bearings ■ The door can be made to open either left or right ■ If it is difficult to bring in completed products, on-site construction of the furnace is possible *For more details, please refer to the PDF materials or feel free to contact us.

• Electric furnace

The "TY-W Series" is a double-opening electric furnace with both a top lid and front door that open and close. By having openings in both the front and above, it allows for a generally upright posture, making it easy to load and unload large works. Additionally, during loading, it is easier to check the depth, which helps prevent heater damage due to contact with shelves. Thanks to its unique design, there are no concerns about heat leakage. 【Features】 ■ Significantly reduces the burden of loading work by opening in two directions ■ Equivalent airtightness to other models ■ Sturdy casing made from thicker steel materials ■ Front door is securely welded to a pipe with bearings ■ Top lid opens and closes with a winch *For more details, please refer to the PDF document or feel free to contact us.

• Electric furnace

The "TY-F Series" is a top-loading electric furnace that can save 2 kilowatts of power compared to the internal dimensions of the "TY Series." By using ceramic boards with low thermal conductivity and excellent insulation properties for the furnace walls, it can reduce power consumption by 20% compared to electric furnaces of the same volume. Additionally, the weight is reduced to about half, making it suitable for locations with weight load restrictions. 【Features】 ■ Saves 2 kilowatts of power compared to the internal dimensions of the "TY Series" ■ Uses three types of ceramic boards for the furnace walls ■ Enables rapid heating with high insulation effectiveness ■ Can be installed in locations with weight restrictions due to significant weight reduction ■ The burner port can be positioned at the front *For more details, please refer to the PDF materials or feel free to contact us.

• Electric furnace

The "TY Series" is a standard model top-loading electric furnace. The top lid opens, allowing for loading from above. Inside the columns at the back of the furnace, there are weights that enable the lid to be opened and closed with minimal effort. Additionally, larger models are equipped with a winch and steps to facilitate easier loading. The structure of the top lid is specially constructed with ceramic modules, which prevents deterioration and collapse over time, unlike methods that involve hanging bricks or ceramic boards. 【Features】 ■ Compact ■ Standard model ■ Sufficient performance as needed ■ The top lid can be easily opened using weights ■ Burner ports can be positioned at the front *For more details, please refer to the PDF materials or feel free to contact us.

• Electric furnace

The "SY Series" is a strong reducing electric furnace that prevents carbon adhesion by encapsulating a heater in an alumina pipe, allowing for reduction without worrying about heater breakage. The alumina pipe also has high insulation properties, preventing any risk of electric shock in case of an accident. Additionally, it is effective against harmful combustion gases that can affect the heater, making it usable as a heating furnace as well. 【Features】 ■ Coil heater encapsulated in alumina pipe ■ Protects the heater from carbon, glaze, and alkalis ■ Alumina pipe has high insulation properties to prevent electric shock ■ Inner ceramic board enhances thermal efficiency ■ Burner port can be positioned at the front *For more details, please refer to the PDF document or feel free to contact us.

• Electric furnace

The "TY-NS Series" is a smokeless reduction electric furnace that allows for reduction by simply inserting charcoal into the combustion chamber under the floor twice instead of using flames. There are no flames or smoke produced, making it suitable for environments with restrictions, such as building tenants who wish to perform reduction. 【Features】 ■ Reduction firing using charcoal ■ Safe reduction without worrying about flames or smoke ■ Uses inexpensive mangrove charcoal ■ The top cover is made of a highly insulating ceramic module structure *For more details, please download the PDF or contact us.

• Electric furnace