ハムリー List of Products and Services

The "RC2" is a rodent circuit controller suitable for anesthetic procedures on multiple rats and mice (rodents) in experimental settings. The main operation involves simply turning the switch ON and OFF, making it easy to use even for those without knowledge of inhalation anesthesia. In just 1 to 2 minutes, the gas fills the anesthesia induction chamber, allowing for rapid induction of anesthesia. 【Features】 - Easy to use even for those without knowledge of inhalation anesthesia - No need to adjust oxygen flow rate - Six circuits can be used simultaneously - Operable with just the ON/OFF switch toggling - Rapid induction of anesthesia *For more details, please refer to the PDF document or feel free to contact us.

• Other experimental equipment

"IMPAC6" is a large animal anesthesia center suitable for anesthetic procedures on a large number of rats and mice (rodents). Euthanasia using carbon dioxide or recovery with oxygen can also be performed in the upper chamber of the main unit. Additionally, each of the six circuits, which include four anesthetic induction chambers and two maintenance anesthesia circuits, is equipped with ON/OFF oxygen flush switches, enabling quick procedures. 【Features】 - Model suitable for anesthetic procedures on a large number of rats and mice (rodents) - Four anesthetic induction chambers and two maintenance anesthesia circuits - ON/OFF oxygen flush switches for each of the six circuits - Reduces malfunctions and enables quick procedures - Adjustable gas flow rate *For more details, please refer to the PDF document or feel free to contact us.

• Other experimental equipment

The "COMPAC5" is a fully equipped anesthesia system with functions for suctioning excess gas and maintaining the temperature of the chamber. The maintenance anesthesia circuit and the anesthesia induction chamber circuit operate independently, allowing for gas flow rates to be switched between 0.5 L/min and 1 L/min for each circuit. The three-chamber system can be used as a larger chamber of up to 6 liters by removing the partitions. 【Features】 ■ Equipped with two types of maintenance anesthesia circuits and three anesthesia induction chambers ■ Set the anesthesia concentration using a dial; other operations can be done with switches only ■ Gas flow rates can be switched between 0.5 L/min and 1 L/min for each circuit ■ The included excess gas suction device ensures constant ventilation of the circuit ■ There is no concern about anesthesia exposure to the operator when removing the animal from the chamber *For more details, please refer to the PDF document or feel free to contact us.

• Other experimental equipment

The "Anesthesia Induction Chamber" is a "box" used for inducing anesthesia in experimental animals. It does not cause leaks even under high pressure, thanks to the gasketed lid. Made of transparent and highly durable acrylic resin, the inlet and outlet sizes are 15mm inner diameter and 22mm outer diameter. 【Features】 ■ Used for inducing anesthesia ■ Does not cause leaks even under high pressure ■ Transparent and highly durable acrylic resin ■ Comes with a large, easy-to-use clasp ■ Bottom plate with non-slip surface *For more details, please refer to the PDF document or feel free to contact us.

• Other experimental equipment

The "non-rebreathing circuit" is a respiratory circuit used for anesthetizing small animals. The animal inhales anesthetic gas that comes through a thin fresh gas tube, and excess gas and exhaled air are expelled through a thick exhaust gas tube to activated carbon filters or draft chambers. We offer a lineup including the "Mapleson E circuit" and the "Bain circuit." 【Features】 ■ Used for anesthetizing small animals ■ The animal inhales anesthetic gas that comes through a thin fresh gas tube ■ Expels to activated carbon filters or draft chambers *For more details, please refer to the PDF document or feel free to contact us.

• Other experimental equipment

The "Scavenging Cube" is a compact excess gas suction device that can be connected to a ventilated chamber or breathing circuit. By opening the lid (sliding type) of the ventilated chamber, the anesthetic gas that comes out can be directly suctioned and exhausted. We also offer the excess gas suction device "Extract All" with two larger suction ports and a filter for "Extract All." 【Features】 ■ Can be connected to a ventilated chamber or breathing circuit ■ Compact ■ Easy to carry ■ Easy filter replacement ■ Size: W24×D11.5×H15.5cm *For more details, please refer to the PDF document or feel free to contact us.

• Other experimental equipment

The "Excess Gas Monitoring Badge" is worn near the breathing area, such as at the collar, during standard anesthesia procedures. While the badge is worn, it absorbs anesthetic gas, and the exposure level of the wearer is analyzed based on the gas absorbed. After the measurement is conducted, the exposure level of the badge is analyzed at a U.S. analytical facility. The results of the analysis are submitted to the customer as a report. By conducting monitoring at regular intervals (such as every six months or annually), you can use the analysis report as a basis to determine whether proper measures against excess gas are being implemented and whether there are any points that need to be reviewed in the anesthesia protocol. 【Features】 ■ Enables measurement of the experimenter's exposure ■ Analysis of the badge's exposure level is conducted at a U.S. analytical facility ■ The results of the analysis are submitted to the customer as a report *For more details, please refer to the PDF document or feel free to contact us.

• others

The "Anesthesia Workstation (AWS)" is a ventilator designed for mammals, birds, and reptiles, used with a circulating anesthesia machine and ventilation control. By connecting it to your vaporizer, it enables inhalation anesthesia with general inhalation anesthetics (such as isoflurane, sevoflurane, and halothane). It can also be used independently as an intermittent positive pressure ventilation (IPPV) ventilator. Additionally, it can be optionally adjusted to change the tidal volume from 0 to 200 ml. 【Features】 ■ Equipped with a pressure bar graph display on the breathing circuit ■ Unique rebreathing circuit alleviates exhalation resistance and circuit compliance ■ Suitable for mammals and birds weighing from 150g to 7kg ■ Can be used independently as an intermittent positive pressure ventilation (IPPV) ventilator ■ Tidal volume can be adjusted from 0 to 200 ml (optional) *For more details, please refer to the PDF document or feel free to contact us.

• Other experimental equipment

The "Model 2002" is a bellows-driven, electronically controlled time-cycle anesthesia ventilator. Being electronically controlled, it is a model that minimizes the consumption of high-pressure oxygen, nitrous oxide, and compressed air. It adopts an upward-acting bellows design, preventing the mixing of air or driving gas. It is suitable for animals weighing between 1 to 200 kg, including pigs, dogs, monkeys, and rabbits, and can be used with both rebreathing and non-rebreathing circuits of the anesthesia machine. 【Features】 ■ No mixing of air or driving gas ■ Replaceable bellows housing ■ Wide range of tidal volume (TV) from 0 to 3000 mL ■ Ability to check for leaks in the cuff of the endotracheal tube ■ Minute ventilation ranges from 0 to 100 L *For more details, please refer to the PDF document or feel free to contact us.

• Other experimental equipment

The "Microvent 1" is a portable artificial respirator for rat and mouse anesthesia. It features a ventilation mode for conventional IPPV (Intermittent Positive Pressure Ventilation) and a ventilation mode for HFOV (High-Frequency Oscillatory Ventilation), which has less risk of pressure injury and circulatory suppression. Both ventilation modes are designed for small rodents with a ventilation volume of less than 1cc. It can be used in conjunction with an endotracheal tube that ensures secure airway management, allowing for inhalation anesthesia and controlled breathing. 【Features】 ■ Two modes of ventilation ■ Compact ■ Tabletop model ■ Convenient for transport ■ Designed specifically for mice and rats *For more details, please refer to the PDF document or feel free to contact us.

• Other experimental equipment

We offer "pharmacokinetic testing." As part of the initial screening of drugs, we conduct PK tests using various administration methods and sampling points. By conducting contract breeding of monkeys and dogs, we can perform repeated tests using the same animals. Additionally, monkeys can be trained to allow for non-restrained administration and blood sampling within their cages. [Animal Subjects] ■ Mice, rats, guinea pigs, ferrets, rabbits, cats, dogs, pigs, and primates *For more details, please contact us.

• Other Testing Contract
• Other analysis and evaluation services
• Other contract services