パイルスジャパン List of Products and Services

We have developed the "Piles Drum Residual Reduction System" and the "Purgeless System" aimed at saving materials for drum cans. The "Piles Drum Residual Reduction System" is a system that can reduce the amount of material remaining in the drum can by half compared to the conventional LS (Limit Switch) fixed method. The "Purgeless System" is a system that reduces the amount of material discharged for air removal by creating a vacuum from the follower plate during drum can replacement. Both systems have a proven track record of delivery to various factories. 【Features of the Piles Drum Residual Reduction System】 ■ Effective utilization of materials ■ Achieves a reduction in industrial waste by half ■ Significant cost reduction ■ Contributes to CO2 emission reduction *For more details, please refer to the PDF document or feel free to contact us.

• others

We would like to introduce our auto guns, the '930J-3081/930J-3200TQA2'. We have two products in our lineup so you can choose based on your intended use. The main difference between these two models is that the "930J-3081" uses radial bearings, while the "930J-3200TQA2" uses angular bearings to accommodate higher pressure. 【Features】 ■930J-3081 　・Uses radial bearings ■930J-3200TQA2 　・Can handle higher pressure 　・Uses angular bearings *For more details, please refer to the PDF document or feel free to contact us.

• Other pumps

The "720P-2130-23" is a 6B elevator pump optimized for drawing high-viscosity materials from drums. The chopping pump features a double-action mechanism (with built-in chucks that discharge in both directions), allowing for minimal pulsation and continuous discharge. It uses an air motor for vertical drive, designed for quiet operation. 【Features】 ■ Optimized for drawing high-viscosity materials from drums ■ Double-action mechanism in the chopping pump ■ Minimal pulsation and continuous discharge capability ■ Air motor used for vertical drive ■ Quiet design *For more details, please refer to the PDF document or feel free to contact us.

• Other pumps

The "60000 Series (720P-2138-11)" is an elevator pump optimized for extracting high-viscosity materials from a drum. The chopping pump features a double-action mechanism (discharging in both upward and downward directions), allowing for minimal pulsation and continuous discharge. An air motor is used for the up-and-down drive, designed for quiet operation. 【Features】 ■ The chopping pump employs a double-action mechanism ■ Minimal pulsation allows for continuous discharge ■ An air motor is used for the up-and-down drive ■ Quiet design ■ Optimized for extracting high-viscosity materials from a drum *For more details, please refer to the PDF document or feel free to contact us.

• Other pumps

The "8010P-2165-27" is a high-capacity quantitative dispensing device. The discharge amount is controlled by the rotation speed of the servo motor, making it suitable for high-viscosity materials such as adhesives, sealants, and urethane. It performs quantitative dispensing and discharges a uniform bead unaffected by fluctuations in supply pressure. The initial pressure on the secondary side of the pump can be adjusted, allowing for consistent bead application from the start of dispensing. 【Features】 ■ High-capacity type ■ Discharge amount controlled by the rotation speed of the servo motor ■ Suitable for high-viscosity materials such as adhesives, sealants, and urethane ■ Performs quantitative dispensing and discharges a uniform bead unaffected by fluctuations in supply pressure ■ Initial pressure on the secondary side of the pump can be adjusted *For more details, please refer to the PDF document or feel free to contact us.

• Other pumps

The "410P-2227-3" is a trochoidal (gear type) constant flow rate pump designed to maintain a consistent capacity for delivering high-viscosity materials. The drive source is a servo motor, allowing for flow rate adjustment based on the rotation speed. For materials used at high temperatures, there are compatible models with heaters, and some models feature a Teflon coating on the inside to improve maintenance. 【Features】 ■ Trochoidal (gear type) ■ Drive source is a servo motor, allowing for flow rate adjustment based on rotation speed ■ Models with Teflon coating on the inside to enhance maintenance are also available *For more details, please refer to the PDF document or feel free to contact us.

• Other pumps

This catalog introduces the fluid dispensing equipment handled by Piles Japan Co., Ltd., which possesses accumulated technology and know-how related to fluid equipment, including total engineering. It features robust and highly durable pumps suitable for dispensing high viscosity and ultra-high viscosity materials, such as the "700 Series," as well as the drum-type bulk hot melt pump "Thermo Flow III." [Contents] ■ Pumps and peripheral equipment ■ Bulk hot melt pumps ■ Two-component metering and mixing devices ■ Sealant guns and caulking guns *For more details, please download the PDF or contact us.

• Vacuum pump
• Flow Meter