西部商工 List of Products and Services

"Seibu Maintenance Service" is a service where experienced industrial machinery engineers conduct inspections, parts replacements, and maintenance on various types of machinery and equipment on behalf of your company. They are well-versed in parts that are prone to failures and subtle abnormalities that are often overlooked, allowing them to provide accurate advice. By combining necessary inspection points, you can create an appropriate maintenance plan. An equipment maintenance application has also been added to the lineup, which, when combined with maintenance, enhances effectiveness. [Features] ■ Engineers with extensive experience can handle anything related to equipment ■ Maintenance items are categorized into a menu to accommodate a wide range of customer needs ■ Engineers familiar with equipment maintenance support IoT implementation ■ Custom system development tailored to customer needs is also available *For more details, please refer to the PDF document or feel free to contact us.

• Other contract services

We would like to introduce our custom knurled pins. The standard hardness is HRc 61±1, and various materials and coatings are available for selection. Knurling can be performed on flat surfaces or inner diameters, and we can accommodate conical shapes, R, and reverse R shapes according to your requirements. 【Features】 ■ Custom conical shapes, R, and reverse R shapes can be accommodated ■ Standard hardness is HRc 61±1 ■ Various materials and coatings are available for selection ■ Knurling can be performed on flat surfaces or inner diameters ■ Fine grinding blades *For more details, please refer to the PDF document or feel free to contact us.

• Processing Contract
• Other cutting tools
• Other machine elements

We would like to introduce our roll-formed knurling tools. The hardness is HRc 61±1, and the standard material is HSS (uncoated), with various materials and coatings available for selection, including options for chamfered or non-chamfered. These tools comply with DIN403 for knurling processing according to DIN82, and we can accommodate other pitches upon request. 【Features】 ■ Tools compliant with DIN403 for knurling processing according to DIN82 ■ Standard hardness is HRc 61±1 ■ Standard material is HSS (uncoated) ■ Options for chamfered or non-chamfered available ■ Other pitches can be accommodated upon request *For more details, please refer to the PDF document or feel free to contact us.

• Processing Contract
• Other cutting tools
• Other machine elements

We would like to introduce our cutting-type knurling tools. They comply with DIN403 for knurling processing according to DIN82, with a hardness of HRc 61±1 and a standard material of HSS (uncoated). You can choose from options with or without chamfering, various materials, and coatings, and we can accommodate other pitches upon request. 【Features】 ■ Standard hardness is HRc 61±1 ■ Standard material is HSS (uncoated) ■ Options for with or without chamfering ■ Can accommodate other pitches upon request ■ Suitable for surface cutting or drilling *For more details, please refer to the PDF document or feel free to contact us.

• Processing Contract
• Other cutting tools
• Other machine elements

We would like to introduce our double-type cutting knurling tool, 'MF 21 VDI'. It features a shaft with HSS+TIN coating and a swing head for knurling adjustment. The adjustment method for the knurling is easy to match to the workpiece diameter, making it highly recommended for the knurling type RGE. 【Features】 ■ Highly recommended for knurling type RGE ■ Easy adjustment method for matching workpiece diameter ■ Swing head for knurling adjustment ■ Shaft with HSS+TIN coating *For more details, please refer to the PDF document or feel free to contact us.

• Processing Contract
• Other cutting tools
• Other machine elements

The "MF 42.12" is a double-type cutting knurl that allows for easy adjustment to the workpiece diameter. It is suitable for cutting knurling and can be used on large lathes. It features a carbide-made axle. By simply rotating the head, it can be used on both right-hand and left-hand lathes, and due to its modular design, multiple shanks can be used with the same head. 【Features】 ■ Suitable for cutting knurling ■ Easy adjustment of the workpiece diameter ■ Simple adjustment with a wrench ■ Axle made of carbide ■ Traversing feed (F) only *For more details, please refer to the PDF document or feel free to contact us.

• Processing Contract
• Other cutting tools
• Other machine elements

The "MF 21.55 VDI" is a double-type cutting knurling tool suitable for cutting knurling processing. It allows for easy adjustment with a wrench and simple adjustment of the knurling wheel to the workpiece diameter. It features a rotatable head for better knurling adjustment. It can be used with various machine tools, including Swiss-type lathes, multi-spindle lathes, general-purpose lathes, and CNC lathes. 【Features】 ■ Suitable for cutting knurling processing ■ Easy adjustment of the knurling wheel to the workpiece diameter ■ Simple adjustment with a wrench ■ Traversing feed (F) only ■ Rotatable head for better knurling adjustment *For more details, please refer to the PDF document or feel free to contact us.

• Other cutting tools
• Other machine elements

The "MF 21.55" is a double-type cutting knurling tool that can be used with a VDI shank. It allows for adjustment of the relief angle, and adjusting the knurling wheel to the workpiece diameter is easy. By simply rotating the head, it can be used on both right-hand and left-hand lathes. It is compatible with various machine tools, including Swiss-type lathes, multi-spindle lathes, spindle-moving lathes, and CNC lathes. 【Features】 ■ Suitable for cutting knurling ■ Easy adjustment of the knurling wheel to the workpiece diameter ■ Simple adjustment with a wrench ■ Adjustable relief angle ■ Traversing feed (F) only ■ Usable with VDI shank *For more details, please refer to the PDF document or feel free to contact us.

• Processing Contract
• Other cutting tools
• Other machine elements

The "MF 14.53" is a double-type cutting knurling tool that allows for the adjustment of escape angles. It is suitable for cutting-type knurling and operates only with traverse feed (F). Adjustments can be easily made with a wrench. Additionally, due to its modular design, multiple shanks can be used with the same head, making it compatible with both right-hand and left-hand lathes. 【Features】 ■ Suitable for cutting-type knurling ■ Easy adjustment of the knurl to the workpiece diameter ■ Simple adjustments with a wrench ■ Usable on both right-hand and left-hand lathes ■ Adjustable escape angle ■ Operates only with traverse feed (F) *For more details, please refer to the PDF document or feel free to contact us.

• Processing Contract
• Other cutting tools
• Other machine elements

The "MF 1 14.53" is a double-type cutting knurling tool that allows for the use of multiple shanks due to its modular design. It features adjustable relief angles, making it easy to adjust the tool to the workpiece diameter. It can be used on both right-hand and left-hand lathes. It is suitable only for traverse feed (F) for cutting knurling. It can be used with spindle-moving lathes and Swiss-type machine tools. 【Features】 ■ Easy adjustment with a wrench ■ Usable on both right-hand and left-hand lathes ■ Modular design allows for multiple shank options ■ Adjustable relief angles ■ Only for traverse feed (F) *For more details, please refer to the PDF document or feel free to contact us.

• Processing Contract
• Other cutting tools
• Other machine elements

The "MF 89.25" is a double-type cutting knurl that can be used on both right-hand and left-hand lathes, depending on how the shank is fixed. The adjustment of the knurl to the workpiece diameter is easy, and the head can rotate, which improves the efficiency of aligning the knurl's position. It can be used on Swiss-type lathes and spindle-moving lathes, and due to its modular design, multiple shanks can be used with the same head. 【Features】 ■ Suitable for cutting knurling ■ Easy adjustment of the knurl to the workpiece diameter ■ Simple adjustment with a wrench ■ Adjustable relief angle ■ Traversing feed (F) only *For more details, please refer to the PDF document or feel free to contact us.

• Processing Contract
• Other cutting tools
• Other machine elements

The "MFS 32" is a single-type cutting knurling tool that can be easily adjusted with a wrench. It is suitable for cutting knurling processing and operates only with traverse feed (F). By simply rotating the head, it can be used on both right-hand and left-hand lathes, and due to its modular design, multiple shanks can be used with the same head. 【Features】 ■ Suitable for cutting knurling processing ■ Easy adjustment with a wrench ■ Can be used on both right-hand and left-hand lathes by simply rotating the head ■ Modular design allows multiple shanks to be used with the same head ■ Operates only with traverse feed (F) *For more details, please refer to the PDF document or feel free to contact us.

• Processing Contract
• Other cutting tools
• Other machine elements

The "MFS 42.12" is a cutting-type knurling tool, single type, suitable for cutting knurling. It can be used on large lathe machines. By simply rotating the head portion, it can be used on both right-hand and left-hand lathes. Additionally, due to its modular design, multiple shanks can be used with the same head. 【Features】 ■ Suitable for cutting-type knurling ■ Easy adjustment with a wrench ■ Can be used on both right-hand and left-hand lathes by simply rotating the head portion ■ Multiple shanks can be used with the same head due to its modular design ■ Traversing feed (F) only *For more details, please refer to the PDF document or feel free to contact us.

• Processing Contract
• Other cutting tools
• Other machine elements

The "MFS 21.55" is a single-type cutting knurling tool that can be easily adjusted with a wrench. It is suitable for cutting knurling processing. Due to its modular design, multiple shanks can be used with the same head, and the relief angle can also be adjusted. Additionally, by simply rotating the head, it can be used on both right-handed and left-handed lathes, and the ability to rotate the head improves the efficiency of aligning the workpiece. 【Features】 ■ Suitable for cutting knurling processing ■ Easy adjustment with a wrench ■ Adjustable relief angle ■ Only for traverse feed (F) ■ Can be used on both right-handed and left-handed lathes by simply rotating the head ■ The ability to rotate the head improves the efficiency of workpiece alignment *For more details, please refer to the PDF document or feel free to contact us.

• Processing Contract
• Other cutting tools
• Other machine elements

The "MFS 14.53" is a single-type cutting knurl that allows for the adjustment of escape angles. By simply rotating the head, it can be used on both right-hand and left-hand lathes, and since the head can rotate, the efficiency of aligning the workpiece is improved. Adjustment is easy with a wrench, and due to its modular design, multiple shanks can be used with the same head. 【Features】 ■ Suitable for cutting knurling ■ Easy adjustment with a wrench ■ Modular design allows for multiple shanks to be used with the same head ■ Adjustable escape angle ■ Traversing feed (F) only *For more details, please refer to the PDF document or feel free to contact us.

• Processing Contract
• Other cutting tools
• Other machine elements

The "MFS 1 14.53" is a single-type cutting knurl that can be easily adjusted with a wrench. It is suitable for cutting knurling processes and allows for adjustment of the relief angle. The head can rotate, improving the efficiency of aligning the workpiece. It can be used on spindle-moving lathes and Swiss-type machine tools, and due to its modular design, multiple shanks can be utilized. 【Features】 ■ Suitable for cutting knurling processes ■ Easy adjustment with a wrench ■ Rotating head improves workpiece alignment efficiency ■ Adjustable relief angle ■ Traversing feed (F) only *For more details, please refer to the PDF document or feel free to contact us.

• Processing Contract
• Other cutting tools
• Other machine elements

The "MFS 89.25" is a cutting-type knurling tool designed for cutting knurling, in a single type. It allows for easy adjustment with a wrench, and the escape angle can also be adjusted. The head can rotate, improving the efficiency of aligning the workpiece. Due to its modular design, multiple shanks can be used. 【Features】 ■ Suitable for cutting knurling ■ Easy adjustment with a wrench ■ Modular design allows for multiple shank usage ■ Adjustable escape angle ■ Traversing feed (F) only *For more details, please refer to the PDF document or feel free to contact us.

• Processing Contract
• Other cutting tools
• Other machine elements

The "MFS Series" is a single-type cutting knurl that can be easily adjusted with a wrench. It is suitable for cutting knurling and supports only traverse feed (F). We offer a lineup including the "MFS 89.25" and "MFS 1 14.53," which allow for adjustment of the relief angle, as well as the "MFS 14.53" and "MFS 21.55," which can be used on both right-hand and left-hand lathes. 【Features】 ■ Suitable for cutting knurling ■ Easy adjustment with a wrench ■ Modular design allows multiple shanks to be used with the same head ■ Supports only traverse feed (F) *For more details, please refer to the PDF document or feel free to contact us.

• Processing Contract
• Other cutting tools
• Other machine elements

The "M22" is a double-type rolling knurl that has a low risk of workpiece bending unless subjected to radial pressure. It uses a threaded spindle to adjust the position of the tooth. It is recommended for use with the small diameter RGE type workpieces. Additionally, it features a centering system to adjust for lathe misalignment. 【Features】 ■ Recommended for use with small diameter RGE type workpieces ■ Low risk of workpiece bending unless subjected to radial pressure ■ Hard metal shaft ■ Hardened surface of the arm to enhance wear resistance ■ Option: Arm for single-side use of the workpiece *For more details, please refer to the PDF document or feel free to contact us.

• Processing Contract
• Other cutting tools
• Other machine elements

The "M21" is a double-type rolling knurl designed for processing vertical surfaces, allowing for easy exchange of the knurl due to the fixed axis secured by screws. It is suitable for rolling knurling operations. It can be mounted at various angles using a set of screws inside the shank. Additionally, it is suitable for both traverse feed (F) and radial feed (R). 【Features】 ■ Suitable for rolling knurling operations ■ Can be mounted at various angles using a set of screws inside the shank ■ Well-suited for both traverse feed (F) and radial feed (R) ■ Easy exchange of the knurl due to the fixed axis secured by screws ■ Designed for processing vertical surfaces *For more details, please refer to the PDF document or feel free to contact us.

• Processing Contract
• Other cutting tools
• Other machine elements

The "M16" is a double-type rolling knurl designed for front knurling, eliminating the risk of workpiece bending as the pressures of the knurls compensate for each other. It features a symmetrical knurl set to the workpiece diameter using a threaded spindle. Simple adjustments can be made with a wrench, and due to its modular design, multiple shanks can be utilized. It can be used on both right-hand and left-hand lathes, and it features an automatic centering system to compensate for any potential misalignment between the turret and the machining spindle. 【Features】 ■ Specifically designed for DIN-72783 knurling ■ Shanks manufactured to meet end-user specifications ■ Eliminates the risk of workpiece bending as the pressures of the knurls compensate for each other ■ Easy knurl replacement due to the fixed spindle with screws ■ Spindle made of carbide *For more details, please refer to the PDF document or feel free to contact us.

• Processing Contract
• Other cutting tools
• Other machine elements

The "M12 10.04" is a double-type rolling knurling tool that allows for the use of multiple shanks due to its modular design. It features an automatic centering system to compensate for any potential misalignment that may occur between the turret and the machining axle. With a threaded spindle, the knurling tool can be symmetrically adjusted to the diameter of the workpiece, preventing pressure on the lathe bearings. 【Features】 ■ Suitable for rolling knurling processing ■ Easy adjustment with a wrench ■ Does not apply pressure to the lathe bearings ■ Eliminates the risk of workpiece bending as the pressures of the knurls compensate for each other ■ Suitable for both traverse feed (F) and radial feed (R) *For more details, please refer to the PDF document or feel free to contact us.

• Processing Contract
• Other cutting tools
• Other machine elements

The M11 is a double-type knurling tool suitable for both traverse feed (F) and radial feed (R). It is designed for processing vertical surfaces and can be mounted at various angles using a set of screws inside the shank. The head can tilt, allowing for the maintenance of the centering position between the workpiece and the tool. 【Features】 - Suitable for rolling knurling processing - The tilting head maintains the centering position between the tool and the workpiece - Can be mounted at various angles using a set of screws inside the shank - Well-suited for both traverse feed (F) and radial feed (R) - Designed for processing vertical surfaces *For more details, please refer to the PDF document or feel free to contact us.

• Processing Contract
• Other cutting tools
• Other machine elements

The "M9" is a double-type rolling knurl that allows for easy replacement of the knurl due to the fixed axle secured by screws. It is suitable for rolling knurling and can be used on both right-hand and left-hand lathes. It can be mounted at various angles using a set of screws inside the shank. Additionally, it is suitable for both traverse feed (F) and radial feed (R). 【Features】 ■ Designed for rolling knurling ■ The head can tilt, maintaining the centering position of the workpiece and the knurl ■ Can be mounted at various angles using a set of screws inside the shank ■ Well-suited for both traverse feed (F) and radial feed (R) ■ Axle made of carbide *For more details, please refer to the PDF document or feel free to contact us.

• Processing Contract
• Other cutting tools
• Other machine elements

The "M7" is a double-type rolling knurling tool suitable for medium precision knurling. The head can tilt, allowing for the maintenance of the centering position between the workpiece and the tool. The HSS axle is secured with a circlip. Additionally, it is suitable for both traverse (F) and radial (R) knurling. 【Features】 ■ Suitable for medium precision knurling ■ Not intended for intensive use ■ The tilting head allows for maintaining the centering position between the tool and the workpiece ■ Well-suited for both traverse (F) and radial (R) knurling ■ HSS axle is secured with a circlip *For more details, please refer to the PDF document or feel free to contact us.

• Processing Contract
• Other cutting tools
• Other machine elements

The "M5" is a double-type rolling knurl that can be used on both right-hand and left-hand lathes. It can be mounted at various angles using a set of screws inside the shank. The head can tilt, allowing for the maintenance of the centering position between the knurl and the workpiece. Additionally, the axle is fixed with screws, making it easy to replace the knurl. 【Features】 ■ Suitable for rolling knurling processing ■ The tilting head maintains the centering position between the knurl and the workpiece ■ Usable on both right-hand and left-hand lathes ■ Can be mounted at various angles using a set of screws inside the shank ■ Axle made of carbide *For more details, please refer to the PDF document or feel free to contact us.

• Processing Contract
• Other cutting tools
• Other machine elements

The "M3" is a double-type rolling knurl that is easy to adjust with a regulating nut, eliminating the risk of workpiece bending due to the compensation of pressure between the knurls. It uses a threaded spindle, allowing for symmetrical adjustment of the knurls to the diameter of the workpiece. It does not apply pressure to the lathe's bearings. The HSS axle is secured with a circlip and is suitable for both traverse feed (F) and radial feed (R). 【Features】 ■ Suitable for rolling knurling ■ Easy adjustment with a regulating nut ■ Does not apply pressure to the lathe's bearings ■ Eliminates the risk of workpiece bending due to compensation of pressure between the knurls ■ HSS axle is secured with a circlip *For more details, please refer to the PDF document or feel free to contact us.

• Processing Contract
• Other cutting tools
• Other machine elements

The "M2" is a double-type rolling knurling tool that allows the head to rotate and can hold three pairs of knurls. It is suitable for rolling knurling processing. Since it can rotate, it maintains the centering position of the knurls and the workpiece. Additionally, it is suitable for both traverse feed (F) and radial feed (R). 【Features】 ■ Suitable for rolling knurling processing ■ Head can rotate and holds three pairs of knurls ■ Maintains the centering position of the knurls and the workpiece ■ Well-suited for both traverse feed (F) and radial feed (R) ■ RGE-type knurls are recommended *For more details, please refer to the PDF document or feel free to contact us.

• Processing Contract
• Other cutting tools
• Other machine elements

The "M17" is a triple-type rolling knurling tool recommended for small-diameter workpieces. The automatic centering mechanism significantly improves work efficiency. The knurls are arranged at a distance of 120° and are rotated using a synchronization ring. The axis, fixed with a circlip, allows for easy replacement of the knurls. 【Features】 ■ Recommended for small-diameter workpieces ■ Knurls are arranged at a distance of 120° and rotated using a synchronization ring ■ The automatic centering mechanism significantly improves work efficiency ■ Suitable for front (F) knurling ■ Easy replacement of knurls due to the axis fixed with a circlip ■ HSS axis *For more details, please refer to the PDF document or feel free to contact us.

• Processing Contract
• Other cutting tools

The "M20" is a single-type rolling knurl that allows for easy replacement of the knurl due to its fixed axle secured by screws. It is suitable for both traverse feed (F) and radial feed (R). In the case of traverse feed (F), only the knurl patterns RAA, RBL, and RBR are available. 【Features】 ■ Suitable for rolling knurl processing ■ Can be mounted at various angles using a set of screws inside the shank ■ Suitable for both traverse feed (F) and radial feed (R) ■ Easy replacement of the knurl due to the fixed axle secured by screws ■ For processing vertical surfaces *For more details, please refer to the PDF document or feel free to contact us.

• Processing Contract
• Other cutting tools

The "M19" is a single-type rolling knurl suitable for both traverse feed (F) and radial feed (R). In the case of traverse feed (F), it is only available in the RAA, RBL, and RBR patterns. It is designed for internal rolling knurling, allowing for easy replacement of the workpieces due to the fixed axle secured by screws. 【Features】 ■ Designed for internal rolling knurling ■ Suitable for both traverse feed (F) and radial feed (R) ■ Easy replacement of workpieces due to the fixed axle secured by screws *For more details, please refer to the PDF document or feel free to contact us.

• Processing Contract
• Other cutting tools

The M15 is a single-type rolling knurl that can be used on both right-hand and left-hand lathes. Thanks to the rotating head, it is easy to align the workpiece with the angle of the cylindrical work. It adopts a double-head blocking system, providing high rigidity for the entire holder. The axle, which is fixed with screws, allows for easy replacement of the knurl. 【Features】 ■ Suitable for rolling knurling on cylindrical or flat surfaces ■ The rotating head makes it easy to align the knurl with the angle of the cylindrical workpiece ■ Adopts a double-head blocking system for high rigidity of the entire holder ■ Usable on both right-hand and left-hand lathes ■ Axle made of carbide ■ Easy replacement of the knurl due to the screw-fixed axle *For more details, please refer to the PDF document or feel free to contact us.

• Processing Contract
• Other cutting tools

The "M10" is a single-type rolling knurling tool for machining vertical surfaces. It can be mounted at various angles using a set of screws inside the shank. The axle fixed by screws allows for easy replacement of the knurling wheels. 【Features】 ■ Suitable for rolling knurling processing ■ Can be mounted at various angles using a set of screws inside the shank ■ Suitable for both traverse feed (F) and radial feed (R) ■ For machining vertical surfaces ■ Easy replacement of knurling wheels due to the axle fixed by screws *For more details, please refer to the PDF document or feel free to contact us.

• Processing Contract
• Other cutting tools

The "M8" is a rolling knurling tool that allows for easy replacement of the wheels due to the fixed axle secured by screws. It can be mounted at various angles using a set of screws inside the shank. It can be used on Swiss-type lathes, multi-spindle lathes, main spindle moving lathes, general-purpose lathes, and CNC lathes. 【Features】 ■ Suitable for rolling knurling processing ■ Can be mounted at various angles using a set of screws inside the shank ■ Suitable for both traverse feed (F) and radial feed (R) ■ Axle made of carbide ■ Easy replacement of the wheels due to the fixed axle secured by screws *For more details, please refer to the PDF document or feel free to contact us.

• Processing Contract
• Other cutting tools

The "M6" is a rolling knurl that allows for easy exchange of the workpiece due to the fixed axle secured by screws. It can be mounted at various angles using a set of screws inside the shank. It is suitable for both traverse feed (F) and radial feed (R). 【Features】 ■ Suitable for rolling knurling processing ■ Can be mounted at various angles using a set of screws inside the shank ■ Well-suited for both traverse feed (F) and radial feed (R) ■ Axle made of carbide ■ Easy exchange of the workpiece due to the fixed axle secured by screws *For more details, please refer to the PDF document or feel free to contact us.

• Processing Contract
• Other cutting tools

The "M4" is a single-type rolling knurl that can be mounted at various angles. It allows for easy replacement of the knurl due to the fixed axle with screws. It is suitable for both traverse feed (F) and radial feed (R). 【Features】 ■ Suitable for rolling knurl processing ■ Can be mounted at various angles using a set of screws inside the shank ■ Well-suited for both traverse feed (F) and radial feed (R) ■ Made with a carbide shaft ■ Easy replacement of the knurl due to the fixed axle with screws *For more details, please refer to the PDF document or feel free to contact us.

• Processing Contract
• Other cutting tools

The "M1" is a single-type rolling knurling tool suitable for medium precision knurling. It is well-suited for both traverse (F) and radial (R) knurling processes. The HSS spindle is secured with a circlip. 【Features】 ■ Suitable for medium precision knurling ■ Well-suited for both traverse (F) and radial (R) knurling ■ HSS spindle is secured with a circlip ■ AA pattern knurling is recommended ■ Available machine tools: general-purpose lathes *For more details, please refer to the PDF document or feel free to contact us.

• Processing Contract
• Other cutting tools

The "M23" is a double-type rolling knurl that employs a centering system to adjust for lathe misalignment. There is a low risk of workpiece bending unless radial pressure is applied, and the position of the teeth is adjusted using a threaded spindle. 【Features】 ■ Recommended for small diameter RGE type pieces ■ Low risk of workpiece bending unless radial pressure is applied ■ Employs a centering system to adjust for lathe misalignment ■ Hard metal shaft ■ Adjusts the position of the teeth using a threaded spindle ■ Hardened surface of the arm to enhance wear resistance *For more details, please refer to the PDF document or feel free to contact us.

• Processing Contract
• Other cutting tools

Founded in Spain in 1970, KENFILT has supported the Japanese metal processing industry for 30 years since introducing its first machine to Japan in 1991. The coolant centralized management technology is the optimal solution for improving the precision of processed items, maximizing factory space efficiency and cleanliness, and facilitating ISO certification. KENFILT's pre-coated centralized filtration system uses cellulose as a filtration aid, maintaining the concentration of suspended solids in oil below 35 mg/L and enabling a filtration quality assessment equivalent to ISO 4406 CODE 19/16, with a range of 2µm to 5µm. The filtration technology that removes sludge from coolants used in various processes is backed by years of experience and proven results, regardless of the type of coolant. In this era of heightened environmental awareness, KENFILT has received certification for ISO 14001, the most important international environmental management system standard, recognizing its commitment to pursuing advanced technology while maintaining sound practices. Remaining a trustworthy manufacturer is KENFILT's corporate philosophy.

• Hydraulic Equipment

Grind Master has developed various NANOFINISH attachments that can be mounted on different lathes. They are smooth, compact, and available in different sizes to meet specific requirements. These attachments convert a standard lathe into a high-value super finishing machine with minimal cost and effort.

• Other machine tools

The super finishing machine uses a head consisting of a film-coated abrasive that is stretched around a vibrating contact wheel, which is held against the workpiece between centers. This process helps produce surface finishes up to Ra 0.05.

• Special Processing Machinery

The microfinishing machine uses a head composed of film-backed abrasives with shoe-type backup material that covers workpieces such as crankshafts/camshafts vibrating between centers. This process also achieves improvements in geometric parameters such as roundness. ➡ Features Grind Master NANOSMART Industry 4.0 compatible controller Grind Master NANOFINISH control system Modular design - compact, energy-efficient, user-friendly Optimized cycle time Quick setup changes Fast tooling changes

• Other machine tools

We offer the "GH Series" grinding machines for gears, shafts, worms, rotors, and screws. This is one of our universal solutions tailored to customer applications, capable of handling workpieces with a diameter of up to 500mm. 【Product Lineup】 ■G375H ■G500H ■GP500H ■GR500H ■GRX500H, etc. *For more details, please download the PDF or contact us.

• Grinding Machine

We handle coolant filtration systems. We conduct research, design, and development of equipment that meets the strict conditions required for various processing, and by proposing suitable filtration systems, we can enhance efficiency and productivity. Please feel free to contact us if you have any requests. 【Benefits】 ■ Improved tool life ■ Extended grinding wheel life ■ Increased machine lifespan ■ Enhanced surface roughness ■ Improved shape accuracy, etc. *For more details, please download the PDF or contact us.

• Other physicochemical equipment
• Other processing machines

We handle the mobile diagnostic tool 'Wifi BoxNG' from Montronix. It diagnoses machine conditions through mobile 3D vibration analysis and optimizes cutting data. Additionally, it performs diagnostics independently of machines and systems using wireless technology. 【Features】 ■ Diagnosis of bearings, linear axes, ball screws, guide systems, etc. ■ Process analysis and optimization ■ Condition monitoring *For more details, please download the PDF or contact us.

• Other measurement, recording and measuring instruments