オガワ精機 List of Products and Services

The "OSK 97TG 12BL" is a compact bottom-loading furnace with a maximum temperature of 1,200°C. It features an elegant integrated design and is available in four capacities: 1.35L, 2.64L, 6.28L, and 21.19L. The heating element is made of HRE wire, and the temperature accuracy is ±1°C. Please feel free to contact us for inquiries. 【Features】 ■ Elegant integrated design ■ Chamber material: No powder drop at high temperatures due to ceramic fiber vacuum molding, achieving over 50% energy savings ■ Self-tuning PID control with a microprocessor from YUDIAN, enabling optimal temperature control ■ Built-in RS485 port and USB adapter for computer control *For more details, please refer to the PDF document or feel free to contact us.

• Industrial Furnace

The "OSK 97TG 17CM" is a chamber-type muffle furnace with a maximum temperature of 1,700°C and a continuous maximum temperature of 1,600°C. The heating element is made of high-quality disilicide molybdenum heater (MoSi2), and the chamber material is made of high-temperature 1800-grade polycrystalline alumina ceramic fiber material. Additionally, the furnace structure features an integrated temperature control system, with alarm signals that can automatically respond to overheating and thermocouple failures for safety protection. 【Features】 ■ Elegant design with an integrated structure ■ Chamber material: Ceramic fiber vacuum molding prevents powder drop at high temperatures, achieving over 50% energy savings ■ Self-tuning PID control by a microprocessor from YUDIAN allows for optimal temperature control ■ Built-in RS485 port and USB adapter enable computer control *For more details, please refer to the PDF materials or feel free to contact us.

• Industrial Furnace

The "OSK 97TG 14CM" is a chamber-type muffle furnace capable of high-temperature heat treatment. With self-tuning PID control by SHIMADEN microprocessor, it enables optimal temperature control. The heating element is a high-quality silicon carbide rod heater (SIC), and the chamber material is high-temperature 1500 type polycrystalline alumina ceramic fiber material. 【Features】 ■ Elegant design with integrated structure ■ Chamber material: Vacuum-formed ceramic fiber, which prevents powder drop at high temperatures and achieves over 50% energy savings ■ Self-tuning PID control by SHIMADEN microprocessor allows for optimal temperature control ■ Built-in RS485 port and USB adapter enable computer control *For more details, please refer to the PDF document or feel free to contact us.

• Industrial Furnace

The "OSK 97TG 12CM" is a chamber-type muffle furnace used for the sintering and heating of new materials such as metal materials, ceramic materials, and nanomaterials. It features an elegant design with an integrated structure, and the maximum temperature is 1,200°C. The heating element uses HRE alloy resistance wire. Additionally, the chamber material is made of high-temperature polycrystalline alumina ceramic fiber board, and the thermocouple is of type N. 【Features】 ■ Elegant design with an integrated structure ■ Chamber material: Ceramic fiber vacuum molded, preventing powder drop at high temperatures and achieving over 50% energy savings ■ Self-tuning PID control using SHIMADEN microprocessor allows for optimal temperature control ■ Built-in RS485 port and USB adapter enable computer control *For more details, please refer to the PDF materials or feel free to contact us.

• Industrial Furnace

The "OSK 97TG 17THd" is a two-zone horizontal tubular furnace that uses chamber materials capable of saving over 50% energy. It is particularly suitable for the sintering and high-temperature heat treatment of new materials such as metal materials, ceramics, and nanomaterials, primarily in industries such as universities, scientific research institutions, factories, companies, petrochemicals, and aerospace. Additionally, it features a built-in RS485 port and USB adapter, allowing for control via a computer. The maximum temperature is 1,700°C, and the heating length is 300 + 300 mm. 【Features】 ■ Uses chamber materials made from vacuum-formed ceramic fiber that do not shed powder even at high temperatures, saving over 50% energy ■ Equipped with two sets of thermocouples, two control devices, and two heating devices ■ Each heating zone can be controlled separately, allowing for two different temperature regions ■ Built-in RS485 port and USB adapter for computer control *For more details, please refer to the PDF document or feel free to contact us.

• Industrial Furnace

The "OSK 97TG 14THd" is a two-zone horizontal tubular furnace suitable for the sintering of new materials and high-temperature heat treatment. It uses chamber materials made from vacuum-formed ceramic fiber that do not shed powder even at high temperatures, allowing for over 50% energy savings. Equipped with two sets of thermocouples, two control units, and two heating units, it has a maximum temperature of 1,400°C and a regular maximum operating temperature of 1,300°C. 【Features】 - Utilizes chamber materials made from vacuum-formed ceramic fiber that do not shed powder even at high temperatures, allowing for over 50% energy savings. - Equipped with two sets of thermocouples, two control units, and two heating units. - Each heating zone can be controlled separately, allowing for two different temperature regions. - Built-in RS485 port and USB adapter enable control via a computer. *For more details, please refer to the PDF materials or feel free to contact us.

• Industrial Furnace

The "OSK 97TG 12THd" is a two-zone horizontal tubular furnace suitable for the sintering and high-temperature heat treatment of new materials such as metal materials, ceramics, nanomaterials, semiconductors, and powder metallurgy. It is equipped with two sets of thermocouples, two control devices, and two heating devices. The chamber material is made from vacuum-formed ceramic fiber, which prevents powder from falling even at high temperatures and saves more than 50% of energy. Additionally, it has a built-in RS485 port and USB adapter, allowing for control via a computer. 【Features】 ■ Uses chamber material made from vacuum-formed ceramic fiber that prevents powder from falling at high temperatures and saves over 50% of energy ■ Equipped with two sets of thermocouples, two control devices, and two heating devices ■ Each heating zone can be controlled separately, allowing for two different temperature regions ■ Built-in RS485 port and USB adapter enable control via a computer *For more details, please refer to the PDF document or feel free to contact us.

• Industrial Furnace

The "OSK 97TG 17THt" is a three-zone horizontal tubular furnace suitable for the sintering and high-temperature heat treatment of new materials such as metal materials, ceramics, nanomaterials, semiconductors, and powder metallurgy. Each heating zone can be controlled separately, allowing for three different temperature regions. The chamber material is made from vacuum-formed ceramic fiber, which prevents powder from falling even at high temperatures and saves over 50% in energy. Please feel free to contact us when you need assistance. 【Features】 ■ Uses chamber material made from vacuum-formed ceramic fiber that prevents powder from falling even at high temperatures, saving over 50% in energy. ■ Equipped with three sets of thermocouples, control devices, and heating devices. ■ Each heating zone can be controlled separately, allowing for three different temperature regions. ■ Built-in RS485 port and USB adapter enable control via a computer. *For more details, please refer to the PDF document or feel free to contact us.

• Industrial Furnace

The "OSK 97TG 14THt" is a three-zone horizontal tubular furnace suitable for the sintering and high-temperature heat treatment of new materials such as metal materials, ceramics, nanomaterials, semiconductors, and powder metallurgy. It is equipped with three sets each of thermocouples, control devices, and heating devices. It has a built-in RS485 port and USB adapter, allowing for control via a computer. Additionally, each heating zone can be controlled separately, enabling the achievement of three different temperature regions. 【Features】 - Uses chamber materials made from vacuum-formed ceramic fiber that do not shed powder even at high temperatures, saving over 50% energy. - Equipped with three sets each of thermocouples, control devices, and heating devices. - Each heating zone can be controlled separately, allowing for three different temperature regions. - Built-in RS485 port and USB adapter enable control via a computer. *For more details, please refer to the PDF materials or feel free to contact us.

• Industrial Furnace

The "OSK 97TG 12THt" is a three-zone horizontal tubular furnace suitable for the sintering and high-temperature heat treatment of new materials such as metal materials, ceramics, nanomaterials, semiconductors, and powder metallurgy. It uses chamber materials made from vacuum-formed ceramic fibers that do not shed powder even at high temperatures, saving over 50% in energy. Additionally, it is equipped with an RS485 port and a USB adapter, allowing for control via a computer. 【Features】 - Uses chamber materials made from vacuum-formed ceramic fibers that do not shed powder even at high temperatures, saving over 50% in energy. - Equipped with three sets each of thermocouples, control devices, and heating devices. - Each heating zone can be controlled separately, allowing for three different temperature regions. - Built-in RS485 port and USB adapter enable control via a computer. *For more details, please refer to the PDF document or feel free to contact us.

• Industrial Furnace

The "OSK 97TG 17TVs" is a vertical tubular furnace primarily used for metallurgy, glass, heat treatment, and lithium battery anode and cathode materials. It features a simple furnace structure that allows for easy operation. The crucible can be manually lifted, making sample exchange easy. Please feel free to contact us when you need assistance. 【Features】 ■ Small installation area with rapid heating/cooling processes possible ■ Crucibles and heating materials can be suspended inside the tube ■ The crucible can be manually lifted for easy sample exchange ■ Simple furnace structure, easy operation *For more details, please refer to the PDF document or feel free to contact us.

• Industrial Furnace

The "OSK 97TG 14TVs" is a vertical tubular furnace primarily used for metallurgy, glass, heat treatment, and lithium battery anode and cathode materials. It is possible to suspend crucibles and heating materials inside the tube. Additionally, the crucible can be manually lifted, making sample exchange easy. Please feel free to contact us when you need assistance. 【Features】 ■ Small installation area with rapid heating/cooling processes possible ■ Ability to suspend crucibles and heating materials inside the tube ■ Crucibles can be manually lifted for easy sample exchange ■ Simple furnace structure and easy operation *For more details, please refer to the PDF materials or feel free to contact us.

• Industrial Furnace

The "OSK 97TG 12TVs" is a vertical tubular furnace primarily used for metallurgy, glass, heat treatment, and lithium battery anode and cathode materials. It has a small installation area and allows for rapid heating and cooling processes. The crucible can be manually lifted, making sample exchange easy. Please feel free to contact us when you need assistance. 【Features】 - Small installation area with rapid heating and cooling processes - The crucible and heating materials can be suspended inside the tube - The crucible can be manually lifted for easy sample exchange - Simple furnace structure with easy operation *For more details, please refer to the PDF materials or feel free to contact us.

• Industrial Furnace

The "OSK 97TG 17THs" is a horizontal tubular furnace suitable for the sintering and high-temperature heat treatment of new materials such as metal materials, ceramics, nanomaterials, semiconductors, and powder metallurgy. It features an elegant design and a compact structure that is integrated. With self-tuning PID control by the SIMADEN microprocessor, it allows for optimal temperature control. Additionally, it has a built-in RS485 port and USB adapter, enabling computer control. 【Features】 ■ Elegant design and integrated compact structure ■ Multi-layer insulation design, free of asbestos components, resulting in low heat loss and energy consumption ■ The chamber material uses vacuum-type ceramic fiber, preventing powder drop at high temperatures and achieving over 50% energy savings *For more details, please refer to the PDF document or feel free to contact us.

• Industrial Furnace

The "OSK 97TG 14THs" is a horizontal tubular furnace suitable for the sintering and high-temperature heat treatment of new materials such as metal materials, ceramics, nanomaterials, semiconductors, and powder metallurgy. The chamber material uses vacuum-type ceramic fibers, preventing powder drop at high temperatures and achieving over 50% energy savings. It is equipped with an RS485 port and a USB adapter for computer control. Additionally, it allows for optimal temperature control through self-tuning PID control using a SIMADEN microprocessor. 【Features】 ■ Elegant design with a compact integrated structure ■ Multi-layer insulation design, free of asbestos components, resulting in low heat loss and energy consumption ■ The chamber material uses vacuum-type ceramic fibers, preventing powder drop at high temperatures and achieving over 50% energy savings *For more details, please refer to the PDF document or feel free to contact us.

• Industrial Furnace

The "OSK 97TG 12THs" is a horizontal tubular furnace suitable for the sintering and high-temperature heat treatment of new materials such as metal materials, ceramics, nanomaterials, semiconductors, and powder metallurgy. The temperature control panel allows for precise temperature control in PID and SSR control modes. With high-quality quartz glass working tubes and metal or corundum working tubes, it can accommodate different working conditions. Additionally, the high-quality HRE spiral resistance wire heating element ensures energy efficiency, effectiveness, and long service life while maintaining uniformity within the furnace. 【Features】 ■ The furnace shell is made of metal Q235 low carbon steel, with a surface that is electrostatic resistant and corrosion-resistant. ■ A robust double-layer metal frame combined with an insulated fan structure keeps the surface temperature of the furnace low. ■ Multi-layer insulation design, free of asbestos components, results in low heat loss and energy consumption. ■ The high-quality HRE spiral resistance wire heating element ensures energy efficiency, effectiveness, and long service life while maintaining uniformity within the furnace. *For more details, please refer to the PDF document or feel free to contact us.

• Industrial Furnace

The "OSK 75GQ M5000" is a metal analysis device that uses CCD technology. With a programmable digital spark source and automatic calibration technology, it is possible to obtain fast and reliable results. Its robust structure, convenient operation, and high reliability have made it popular in countries around the world. Additionally, the argon purge control protects the entrance lens from contamination, minimizing maintenance. 【Features】 ■ High performance at a low price ■ Compact design for tabletop use ■ Global factory calibration through interference correction ■ High precision and stability through spectrometer temperature control ■ Energy-saving design with standby power of 100VA and no need for a vacuum pump *For more details, please refer to the PDF document or feel free to contact us.

• Spectroscopic Analysis Equipment

The "OSK 97UO 400MA" is a precision cutting machine that can cut various shapes of samples, including various metal materials, ceramics, quartz glass, and rock samples, with an automatic/manual switching function. It is equipped with various jigs for different fixing methods, allowing for the cutting of diverse sample shapes. The aluminum cast base and SUS304 cover provide excellent durability and corrosion resistance. Additionally, the built-in circulating cooling water tank in the self-standing housing is easy to remove and clean. 【Features】 - Excellent durability and corrosion resistance with an aluminum cast base and SUS304 cover - Equipped with a 3-axis joystick and a large work table - Position adjustment utilizing precise measurements with laser light - The X-axis (parallel cutting) can be manually moved, allowing for multiple cuts with a single fixation *For more details, please refer to the PDF document or feel free to contact us.

• Plastic processing machines (cutting and rolling)

The "OSK 97UO 300 PRO" is an automatic precision cutting machine capable of precise and advanced cutting through touch panel control. Equipped with automatic cutting functionality that adjusts positions in the X, Y, and Z axes using precise measurements from laser light. It can achieve excellent cutting surfaces even for samples with thick cross-sections by utilizing various cutting methods and techniques. Additionally, various fixing jigs can be used beyond the standard T-shaped slot, allowing for secure fixation of diverse sample shapes. 【Features】 ■ Equipped with automatic cutting functionality that adjusts positions in the X, Y, and Z axes using precise measurements from laser light ■ Capable of meeting various cutting requirements through diverse cutting modes ■ Various fixing jigs can be used beyond the standard T-shaped slot, allowing for secure fixation of diverse sample shapes *For more details, please refer to the PDF document or feel free to contact us.

• Plastic processing machines (cutting and rolling)

The "OSK 97UO 300CT" is a manual precision cutting machine compatible with rotating cutting blades of Φ300mm and Φ350mm. It is capable of cutting test pieces of various shapes, sizes, and complex materials. The robust aluminum work table and user-friendly control panel allow for easy and precise cutting. Additionally, for the safety of the operator, it is equipped with a door lock and an emergency stop button. 【Features】 ■ Equipped with a high-output motor (5.5Kw) that provides powerful torque for cutting various test materials. ■ Features a flexible fixture structure, allowing for the cutting of samples with complex shapes. ■ The robust aluminum work table and user-friendly control panel enable easy and precise cutting. *For more details, please refer to the PDF document or feel free to contact us.

• Plastic processing machines (cutting and rolling)

The "OSK 97UO 250CT" is a manual precision cutting machine suitable for cross-sectional observation of both metallic and non-metallic materials, with a cutting height of Φ80mm. The cutting chamber is a sealed structure equipped with an emergency stop switch, allowing observation of the cutting process through a large window. The structure that secures both sides firmly holds the sample in place. Additionally, the independent water tank and filter system make it easy to collect cutting debris, ensuring a long lifespan. 【Features】 ■ Equipped with a high-speed motor with a maximum rotation speed of 3500rpm (250CT-V) ■ Ergonomically designed easy-to-use handle ■ The structure that secures both sides firmly holds the sample ■ Equipped with a powerful cooling system that reduces heat generated during cutting ■ The independent water tank and filter system make it easy to collect cutting debris, ensuring a long lifespan *For more details, please refer to the PDF document or feel free to contact us.

• Plastic processing machines (cutting and rolling)

The "OSK 997SM AX6" is a sample embedding rough polishing machine that can complete 6 samples simultaneously in 15 minutes. It features a stable, self-standing design with safety functions that consider the operator's safety. It can perform the entire process from embedding to rough polishing in one unit. Additionally, it employs fixtures that prioritize operator safety, locking until the temperature falls below the set level during cooling. 【Features】 ■ Immediately continue rough polishing work after embedding is complete ■ Automatically perform embedding work with the push of a button ■ Simultaneous embedding of 6 samples in one cycle ■ Locks until the temperature falls below the set level during cooling *For more details, please refer to the PDF document or feel free to contact us.

• Wafer processing/polishing equipment

The "OSK 97TG 12TVt" is a vertical tubular furnace that can be used for the sintering and high-temperature heat treatment of materials such as metals, ceramics, nanomaterials, and semiconductors. It is also suitable for the sintering and high-temperature heat treatment of new materials like powder metallurgy. The device is equipped with a circuit breaker system that can automatically protect both the equipment and the operator in the event of a short circuit. Additionally, the precision needle valve can adjust the intake and exhaust of air, and it is capable of supplying protective gases such as nitrogen, argon, and hydrogen. [Options] ■ Rotary vacuum pump ■ Digital vacuum gauge ■ Float flow meter ■ Corundum boat *For more details, please refer to the PDF document or feel free to contact us.

• Industrial Furnace

The "OSK 97TG 14VC" is a vacuum atmosphere furnace that can operate under vacuum and protective atmospheres. It is suitable for heat treatment of hard alloys, ceramics, and powder metallurgy materials, as well as vacuum hardening, annealing, brazing of high-speed steel, alloy grinding tools, and soft magnetic materials. General molecular pumps, diffusion pumps, Roots pumps, and mechanical pumps can be selected. Additionally, the furnace shell is equipped with gas intake and exhaust valves, allowing gases such as argon and nitrogen to pass through the vacuum port. 【Features】 ■ Integrated stand structure with vacuum system and gas supply system ■ Uses vacuum-type ceramic fibers for high insulation effect and energy savings ■ Self-tuning PID control via microprocessor enables optimal temperature control ■ Built-in RS485 port and USB adapter for computer control *For more details, please refer to the PDF materials or feel free to contact us.

• Industrial Furnace

The "OSK 97TG 17VC" is a vacuum atmosphere furnace that can operate under vacuum and protective atmospheres. It can be equipped with a general molecular pump, diffusion pump, Roots pump, or mechanical pump, allowing it to meet various vacuum level requirements. The furnace shell is equipped with gas intake and exhaust valves, enabling gases such as argon and nitrogen to be passed through the vacuum port. Additionally, it supports heat treatment and vacuum hardening of hard alloys, ceramics, and powder metallurgy materials, as well as annealing, high-speed steel, alloy polishing tools, and brazing of soft magnetic materials. 【Features】 ■ Integrated stand structure with vacuum system and gas supply system ■ Uses vacuum-type ceramic fibers for high insulation effect and energy savings ■ PID controller by YUDIAN brand with options for other brands ■ Installation of high-quality transformers with high voltage and low current *For more details, please refer to the PDF document or feel free to contact us.

• Industrial Furnace

The "BetterPyc 380" is an automatic gas pycnometer that easily achieves high-precision measurements using the gas displacement method, providing maximum reliability. With temperature control, pressure detection, and intuitive software, it can measure sample volume, true density, solids content, and open cell content with up to four decimal places of accuracy. It supports automatic measurement, calibration, and leak detection, making it usable regardless of the operator's level of experience. 【Features】 ■ Multifunctional ■ High precision ■ Comfortable operability ■ Integrated software solution ■ Capable of measuring with a small amount of sample *For more details, please refer to the PDF document or feel free to contact us.

• Electrical Instruments/Electrometers

The "PowderPro A1" is a 14-in-1 powder property testing machine that integrates numerous new technologies such as intelligent control via connection, image processing technology, electromagnetic vibration, and rotary tap density measurement technology. It allows for quick, easy, and accurate measurement of the physical properties of powders. With fully automated computer control or mobile control, it achieves user-friendliness and rapid operation. Additionally, an electronic balance is connected to the device, enabling the recording of weight data by the control system for further data processing and calculations. 【Features】 ■ Angle measurement using imaging technology ■ Compact design ■ Automatic control technology ■ Data communication ■ Unique data output function *For more details, please refer to the PDF document or feel free to contact us.

• Testing Equipment and Devices

The "BeDensi T Pro Series" is a highly reliable tap density testing machine designed by Bettersize. It can measure bulk density and tap density with a reproducibility of 1.0%, helping to understand the flowability of various powder materials. Additionally, it allows for individual measurements at up to three workstations, further enhancing productivity. [Reasons for Choosing Us] ■ Compliance Standards ■ Usability ■ Affordable Price ■ Three Workstations *For more details, please refer to the PDF document or feel free to contact us.

• Testing Equipment and Devices

The "LHC75" is a user-friendly portable dry-well temperature calibrator designed with a compact and lightweight structure. It not only offers a quick response time but also provides excellent performance in stability and uniformity. It delivers a compact, economical, and versatile solution for calibrating RTDs and thermocouples in industrial environments. With a large insert, it features a high-capacity calibration well that allows for the simultaneous calibration of multiple thermocouples. 【Features】 ■ Quick and compact lightweight design ■ High-capacity calibration well ■ Insert diameter Φ27mm, length 120mm ■ Various types of inserts ■ Temperature range: 40℃ to 375℃ ■ Stability: ±0.05℃ *For more details, please refer to the PDF document or feel free to contact us.

• Other temperature and humidity measuring instruments

The "LHC650 Basic" is a dry-well temperature calibrator designed to allow work to be completed in just a few minutes, functioning as a drive lock that can accommodate multiple inserts. It operates within a temperature range of 40°C to 650°C, with a stability of 0.05°C and an accuracy of 0.4°C. It covers various industries and is suitable for a wide range of conditions and applications. Additionally, the availability of a wide variety of inserts means it can be used for calibrating any type of probe or thermocouple. 【Features】 ■ Fast response time ■ Temperature range of 40°C to 650°C ■ Dry well capable of using multiple inserts ■ Insertion depth: 165mm ■ Resolution of 0.1°C, stability of 0.05°C *For more details, please refer to the PDF document or feel free to contact us.

• Other temperature and humidity measuring instruments

The "LHC400 Basic" is a dry well temperature calibrator suitable for a wide range of conditions and applications covering various industries. Designed as a drive lock that allows the use of multiple inserts, it can be operated in just a few minutes. With a wide variety of inserts available, it can be used for the calibration of any probe or thermocouple. 【Features】 ■ Quick response time ■ Temperature range: 40℃ to 450℃ ■ Dry well capable of using multiple inserts ■ Insertion depth: 165mm ■ Resolution: 0.1℃, Stability: 0.01℃ *For more details, please refer to the PDF document or feel free to contact us.

• Other temperature and humidity measuring instruments

The "BeDensi T Series" is a tap density meter that complies with the tap density testing method specified in the ISO 3953:2011 international standard and the United States Pharmacopeia. It consists of modules for timing, control, drive, and operation. The "BeDensi T2" and "BeDensi T3" can simultaneously measure the tap density of powder samples at two or three points. Additionally, we offer the bulk density tester for metal powders, "BeDensi B1-S," the bulk density tester for non-metal powders, "BeDensi B1," and the fluid characteristics tester for metal powders, "HFlow-1." 【Product Lineup (Partial)】 ■ BeDensi T1 (1 cylinder) ■ BeDensi T2 (2 cylinders) ■ BeDensi T3 (3 cylinders) *For more details, please refer to the PDF document or feel free to contact us.

• Testing Equipment and Devices

The "OSK 97XJ WY-M" is a high-precision metal microscope that uses semi-reflective color differential objectives. It features an ergonomic binocular tube that allows for long-term observation thanks to its position adjustment function. In addition to observing metal microstructures in casting, refining, and sintering, it can also be utilized for food safety evaluations, medical research, geological studies, and more. 【Features】 ■ The binocular tube has a high eye point and can rotate 360 degrees ■ Comfortable for long-term use even while wearing glasses ■ Supports various observation methods such as bright field, dark field, simple polarization, and differential interference observation (optional) ■ Equipped with semi-reflective color identification objectives to enhance imaging performance *For more details, please refer to the PDF document or feel free to contact us.

• Other microscopes

The "OSK 97XJ SZM-W" is a binocular stereo microscope that allows for three-dimensional observation of samples in upright real images. It is suitable for cell biology, medical research, precision assembly, and defect detection in electronic manufacturing lines. Additionally, it features a robust structure, excellent optical performance, a wide range of accessories, and various options. 【Features】 ■ High-quality optical devices (optical components coated with a special film layer) ■ Wide magnification range: continuously variable objective lens 0.7X-4.5X (6.4:1) (standard magnification 7X-45X), with auxiliary objective lenses for 3.5-90X magnification ■ Long working distance: (26mm-287mm possible, standard is 100mm), ensuring ample workspace *For more details, please refer to the PDF document or feel free to contact us.

• Other microscopes

The "OSK 97XJ MX-6RT" is an upright metal microscope capable of accommodating a wide range of research fields. It is designed to minimize the operator's burden, and its modular structure allows for the free selection of observation options such as differential interference, oblique illumination, and polarization. Additionally, it features a large glass platform design that allows for a wide range of stage movement. Please feel free to contact us if you have any requests. 【Features】 ■ Equipped with a wide-angle hinged trinocular tube, compatible with camera units ■ Adopts a large glass platform design that allows for a wide range of stage movement ■ High-precision objective lens with a built-in dark field and a slot for differential interference lenses in a 5-hole revolver ■ Safe and stable upright frame structure design *For more details, please refer to the PDF document or feel free to contact us.

• Other microscopes

The "OSK 97UO FL" is a modular sample embedding machine that covers basic functions. It heats from the top and sides to efficiently and completely cure the resin. It is equipped with preheating, pre-pressurization, and heating power (speed) adjustment functions. Additionally, it can be expanded from one unit to a maximum of five units according to the required scale, making it suitable for phased implementation and the creation of large quantities of samples. 【Features】 ■ The lid has a sliding design and can be opened and closed automatically or manually. ■ Control via a 7-inch LCD touchscreen achieves high operability. ■ Up to 16 user-defined programs can be saved. ■ The cooling mode can be selected as automatic or manual, and a recirculating cooling water tank can be connected as an option. *For more details, please refer to the PDF materials or feel free to contact us.

• Resin processing machine
• Heating device
• Cooling system

The "OSK 12QT 6002" is a laboratory model osmometer manufactured by Precision Systems Inc. It features a touch screen-driven menu for easy operation, requiring only the lowering of the head. Concentration measurements are used in a wide range of applications, from quality control in the production of pharmaceuticals, food, and ophthalmic treatment solutions, to monitoring the fluid balance and hydration processes in fish and animals. 【Features】 ■ Fast testing in 90 seconds ■ Slim design with a width of 5 inches, saving workspace ■ Measurement range of 0 to 2000 mOsm/kg ■ Low-cost consumables ■ Step-by-step calibration guide *For more details, please refer to the PDF materials or feel free to contact us.

• Other measurement, recording and measuring instruments

The "OSK 12QT 5010" is a laboratory model osmometer manufactured by Precision Systems Inc., compatible with 10uL samples. It features a built-in ink printer, allowing for flexible calibration using 2 to 5 calibration points. Additionally, it provides accurate results in 60 to 90 seconds. 【Features】 ■ Easy operation with one-button measurement ■ Built-in ink printer ■ Flexible calibration using 2 to 5 calibration points ■ Accurate results obtained in 60 to 90 seconds ■ Space-saving design with a width of 7.5 inches (19 cm) *For more details, please refer to the PDF document or feel free to contact us.

• Other measurement, recording and measuring instruments

The "OSK 12QT 5007" is a laboratory model osmometer manufactured by Precision Systems Inc, compatible with 0.2mL and 2.0mL samples. It has a processing capacity of 30 to 60 samples per hour and allows for fully automated operation within a range of 0 to 3000 mOsm/kg. Additionally, it features a probe with a lifespan 2 to 4 times longer than comparable models, making it a highly durable product. 【Features】 ■ Built-in ink printer ■ Processing capacity of 30 to 60 samples per hour ■ Fully automated operation within a range of 0 to 3000 mOsm/kg ■ Highly durable probe with a lifespan 2 to 4 times longer than comparable models ■ Flexible calibration using 2 to 5 calibration points ■ Keypad and software for statistical analysis and sample record keeping *For more details, please refer to the PDF document or feel free to contact us.

• Other measurement, recording and measuring instruments

The "OSK 12 5004" is a laboratory model osmometer manufactured by Precision Systems Inc. It is used for a wide range of applications, from quality control in the production of pharmaceuticals, food, and ophthalmic treatment solutions, to monitoring the fluid balance and hydration processes in fish and animals. Its space-saving design allows it to be used in just 5 inches (approximately 13 centimeters) of workspace on a countertop. 【Features】 ■ Easy operation with just a simple lowering of the head ■ High-speed testing in one minute ■ Minimal moving parts for high reliability ■ Space-saving design allows it to be used in just 5 inches (approximately 13 centimeters) of workspace ■ Measurement range of 0 to 3000 mOsm/kg *For more details, please refer to the PDF document or feel free to contact us.

• Other measurement, recording and measuring instruments

The "OSK 12QT 5002 OSMETTE A" is a laboratory model osmometer manufactured by Precision Systems Inc., designed for samples of 0.2mL and 2.0mL. It features fully automated operation across a range of 0 to 3000 mOsm/kg and is equipped with two ranges for higher accuracy. Additionally, it has a processing capacity of 30 to 60 samples per hour and allows for simple two-step calibration. 【Features】 ■ Fully automated operation across a range of 0 to 3000 mOsm/kg ■ Processing capacity of 30 to 60 samples per hour - simple two-step calibration ■ Two ranges for achieving higher accuracy ■ Probe lifespan is 2 to 4 times that of comparable models *For more details, please refer to the PDF document or feel free to contact us.

• Other measurement, recording and measuring instruments

The "OSK 12QT 2430" is a laboratory model osmometer manufactured by Precision Systems Inc., designed to accommodate 30uL samples. It features a large capacity that can rotate, allowing for fast measurements with a reading time of 50 to 70 seconds. It offers flexible calibration using 2 to 5 calibration points and is equipped with an ink-based built-in printer that operates within a range of 0 to 2000 mOsm/kg. 【Features】 ■ High precision with low operating costs ■ Large capacity with rotation and fast measurements of 50 to 70 seconds per reading ■ Self-identification and fully automatic calibration ■ Flexible calibration using 2 to 5 calibration points ■ Ink-based built-in printer operating within a range of 0 to 2000 mOsm/kg *For more details, please refer to the PDF document or feel free to contact us.

• Other measurement, recording and measuring instruments

The "OSK 97UO VAC2" is a device used to create specimens by infiltrating resin around the sample using a vacuum impregnation method. It is suitable for processing samples of fine or amorphous metal structures and rock phases. It can be applied in metallography, spectral analysis, hardness testing, and more. Additionally, it is equipped with a large-capacity transparent vacuum chamber, allowing for up to 12 samples to be placed at once when the sample diameter is 40mm. 【Features】 ■ Programmable operation via control panel, allowing settings for pressure, time, and number of cycles ■ Equipped with a sample stage rotation motor, enabling easy rotation with button operation for resin injection ■ External high-pressure air operation is simple and safe (optional: vacuum pump) ■ Features a 5-inch color LCD touch panel for high operability ■ The interior of the sample chamber is easy to clean *For more details, please refer to the PDF materials or feel free to contact us.

• Vacuum Equipment

The "OSK 97UO 1H" is a sample embedding machine that can automatically perform heating and cooling, compatible with samples ranging from Φ30 to 50mm. It can be used for the curing of various resins such as epoxy, phenolic, and acrylic. Equipped with a liquid crystal touch panel control board, it incorporates safety features that consider the operator's safety. 【Features】 ■ High operability achieved through control via a 7-inch liquid crystal touch panel ■ Cooling mode can be selected as automatic or manual, with an optional recirculation tank available ■ Real-time display on the screen during operation, equipped with an emergency stop button ■ Pre-settings and pre-loading can be operated from the main screen ■ User-friendly sliding opening and closing structure, precise alignment ■ Equipped with overheating protection features and implemented safety functions *For more details, please refer to the PDF materials or feel free to contact us.

• Heating device
• Cooling system

The "OSK50TH DTP Series" is a laboratory-grade refrigerator with two temperature zones, available in various capacities and sizes. All models are equipped with a 7-inch LCD touchscreen control panel. The basic screen allows you to grasp and adjust the data necessary for daily management. Additionally, it offers flexible options within a fully stainless steel interior. 【Features】 ■ Suitable for storing biochemical specimens, pharmaceuticals, vaccines, and non-flammable chemicals ■ Equipped with a 7-inch color LCD touchscreen control panel ■ The included color LCD touchscreen control panel has a built-in data logger ■ Advanced storage temperature settings divided into three levels of security ■ Remote monitoring of status is possible via a cloud system on the internet *For more details, please refer to the PDF materials or feel free to contact us.

• Refrigerators and freezers