東京印刷機材トレーディング List of Products and Services

By passing tap water through the "NANO Water" generation device, the gases contained in the tap water are refined to a nanoscale, dramatically altering the properties of the water. Using this "NANO Water" as a substitute for cutting oil during machining represents a completely new technology that significantly improves the challenges faced in processing factories. This technology has already been proven in processing sites for 15 years, demonstrating improvements in machining accuracy, productivity, tool lifespan, and environmental conditions within factories. 【The following issues in the workplace will be improved】 ■ Health issues due to oil mist ■ Environmental issues within the factory ■ Machining accuracy issues ■ Productivity issues ■ Tool wear and tear issues ■ Industrial waste issues ■ Inability to increase production without overtime or additional staffing ★ Please download the cost reduction case study and explanation materials related to the introduction of "NANO Water." We are accepting visits to processing sites using "NANO Water." Please download the materials and contact us at the following address. Tokyo Printing Equipment Trading Co., Ltd. Sales Department 2, Nishio Phone: 03-5850-5551 Email: n240@tpe-t.co.jp

• lathe

The "DELTA SENSOR" is a successor model that significantly enhances the functionality of the "BOTHΣSENSOR" (defect and color tone inspection device for inline installation on printing machines / offline installation on conveyors). By using the cursor scroll operation, you can check the defect images that occurred from printing to completion on the screen. The adoption of a 21-inch vertical touch panel monitor has further improved visibility and operability. It allows for parallel display of the enlarged reference image and the enlarged defect image, enabling detailed examination of the defect images. 【Features】 ■ By conducting inspections in an 8K (4K camera x 2) environment, even finer defect detection is possible. ■ Detailed inspections can be performed from the gripping part to the paper tail. ■ Further improvements in visibility and operability. ■ Minimizes the number of uninspected sheets during reference acquisition and setting changes. *For more details, please refer to the PDF document or feel free to contact us.

• Defect Inspection Equipment

By passing tap water through the "NANO Water" generation device, the gases contained in the tap water are reduced to a nanoscale, drastically changing the properties of the water. Using this "NANO Water" as a substitute for cutting oil during machining represents a completely new technology that significantly improves the challenges faced in processing factories. This technology has already been in practical use for 15 years in processing sites, demonstrating improvements in machining accuracy, productivity, tool lifespan, and the factory environment. 【It addresses the following issues in the workplace】 ■ Health problems due to oil mist ■ Environmental issues within the factory ■ Machining accuracy issues ■ Productivity issues ■ Tool wear and tear issues ■ Industrial waste issues ■ Desire to increase production without overtime or additional staff *For more details, please download the catalog or contact us. *We can also provide explanations while touring the processing site, so please contact us at the following address. Tokyo Printing Equipment Trading Co., Ltd. Sales Department 2, Nishio Phone: 03-5850-5551 Email: n240@tpe-t.co.jp

• lathe

By using tap water that has been refined to the nanoscale with gases contained in water (without any oil), we will improve the following issues in the workplace: 1) Health problems caused by oil mist 2) Environmental issues within the factory 3) Processing accuracy problems 4) Productivity issues 5) Tool wear and tear problems 6) Industrial waste issues 7) Desire to increase production without overtime or additional staff We will address these challenges in processing factories all at once. Come and see for yourself the processing site using this "NANO water." If you contact us, we will guide you at any time. Verify for yourself the processing technology that the world is paying attention to. We have 15 years of experience with this processing technology. Please contact us at the following address for a tour of the processing site using "NANO water." Tokyo Printing Equipment Trading Co., Ltd. Sales Department 2, Nishio Phone: 03-5850-5551 Email: n240@tpe-t.co.jp

• lathe

The "Doyle Sheet Cleaner" is a device that removes paper dust, spray powder, and debris from the entire printing side and edge areas of sheets before printing. It can be installed on both existing machines and new models, and it accommodates a range of paper thicknesses from thin to thick without selection. With a unique head mechanism that ensures proper contact of the brush with the paper surface, it is designed to flexibly adapt to the infeed section of sheet-fed offset machines with minimal installation clearance. 【Features】 ■ Can be installed on both existing machines and new models ■ Accommodates a range of paper thicknesses from thin to thick without selection ■ Performs dust removal on the entire printing side, including edges ■ Unique head mechanism ensures proper contact of the brush with the paper surface ■ Designed for flexible adaptation *For more details, please refer to the PDF document or feel free to contact us.

• Printing Machinery

The "Doyle Web Cleaner" is a web surface dust removal device capable of removing various types of dust, such as paper debris and waste generated during processing, from both the web surface and its edges. It features a special dust removal head structure that allows the brush itself to self-clean, and it operates quietly, eliminating the need for a silencer. Customers dissatisfied with rotary brush-type or non-contact cleaners are encouraged to consider this product. 【Features】 ■ Hybrid dust removal device with a brush and serrated faceplate ■ Original powerful turbo blower and cyclone-type dust collection system from Doyle ■ Special dust removal head structure that allows the brush itself to self-clean ■ Quiet operation, eliminating the need for a silencer ■ Proven track record of 9,000 units worldwide *For more details, please refer to the PDF materials or feel free to contact us.

• Industrial Vacuum Cleaners

The "BOTH Σ SENSOR" is a printing quality inspection device that boasts numerous installations on various printing machines, including offset sheet-fed printers, offset web presses, business form web presses, and gravure printing machines. In addition to defect inspection, it simultaneously conducts color tone inspection across the entire design using proprietary technology and displays the results on a monitor. For offset sheet-fed printers, it reliably controls paper tail flutter regardless of whether the paper is thin or thick, and it can inspect aluminum-coated paper without the influence of stray reflections. 【Features】 ■ Easy operation ■ High-speed scanning camera available ■ Use of IR (patented) ■ Remote maintenance *For more details, please download the PDF or contact us.

• Other inspection equipment and devices

"Dry-G" is a UV irradiation system designed to quickly dry and cure printing inks using UV-LED as the light source for offset printing machines. It consists of a UV-LED irradiation unit, a power and control unit (main power supply, power distribution board, PLC control panel, power supply for UV-LED), an operation unit (portable touch panel), and a cooling device (chiller). 【Features】 ■ Reduces electricity costs ■ Powder-free ■ No high heat or ozone generation ■ Adjustable irradiation width with a 20mm pitch ■ Four models available according to application ■ Low price *For more details, please download the PDF or contact us.

• Drying Equipment