ワイテックサービス List of Products and Services

Powder, pellets, string-like, strip-like, liquid, slurry, etc. Regardless of the state of the material, we can seal and transport a wide variety of materials within a trough. (Stirring and drying can be done simultaneously) The transport volume is also easy to control, and there are no shafts, so there is no tangling. ■ Features ≪Energy Saving≫ - Can transport from 1 to 32 meters with a single drive - Energy consumption is one-third that of a conventional screw (according to our research) ≪Space Saving≫ - Transport angle can be from 0 to 90°, allowing installation in tight spaces - No restrictions on connecting equipment due to single-sided support ≪Cost Saving≫ - Durability is increased by processing special steel for the screw blades (The type of steel used varies depending on the type of material being transported) - One-stop service from design to maintenance reduces costs *For more details, please refer to the PDF document or feel free to contact us.

• Other conveying machines

It has a transport record of 32 meters with a single drive. Residual powder can be significantly reduced by changing the shape of the trough. Since it is completely sealed, there is no spillage or scattering, which reduces the effort required for cleaning and maintenance. It is also possible to transport while adding and stirring chemicals and materials. 【Features】 - Capable of transporting solids, liquids, viscous materials, and string-like items without tangling. - Can transport at an incline from 0° to 90°. - If a steeper slope is needed, vertical transport is also possible, allowing for flexible installation locations. - There are no bearings at the end of the conveyor, so there are no restrictions on connecting equipment, allowing for effective use of space. - It rotates on the resin liner at low speeds, so noise during transport is not a concern. - There is no spillage of transported materials, significantly reducing daily maintenance and cleaning efforts, and improving the working environment around the conveyor. - The screw has a cantilever structure, allowing for transport of up to 32 meters (record) with a single device. *For more details, please refer to the PDF document or feel free to contact us.

• Conveyor
• Other conveying machines
• Mechanical Design

The non-axis screw conveyor can transport items regardless of their type or shape. Since it is fixed only on the power side, even if the transported items get caught in the gap between the screw blades and the trough, they will not jam. It is completely sealed, so there is no spillage, and it is also possible to transport while adding and mixing chemicals, materials, etc. *For more details, please refer to the PDF materials or feel free to contact us.

• Conveyor
• Other conveying machines
• Mechanical Design

At Witec Service Co., Ltd., we accept orders for the design and manufacturing of custom machines. We can provide a comprehensive response from design to manufacturing to maintenance, tailored to your requirements. Here we introduce our 'Film Cleaning Device' that we have developed. 【Features of the Custom Machine - Film Cleaning Device】 ■ Space-saving design that can be set up within a production line ■ Options for wet or dry cleaning, as well as washing, coating, and wiping ■ Compatible with widths from 100 to 1500 mm ■ Can use alcohol, ethanol, and ethyl acetate for coating *Please feel free to contact us for more details.

• Other cleaning machines
• Mechanical Design

At Witec Service Co., Ltd., we accept orders for the design and manufacturing of specialized machines. We can provide a comprehensive response from design to manufacturing to maintenance for equipment tailored to your needs. Introducing our "Work Inverter" that we have developed. 【Features of the Specialized Machine - Work Inverter】 ■ Consideration for impact prevention, allowing for adjustable supply volume ■ Height can be freely selected and can be adjusted for front and rear transportation ■ Specification design according to the transportation equipment *Please feel free to contact us for more details.

• Conveyor
• Mechanical Design

At Witec Service Co., Ltd., we offer one-stop logistics for equipment modifications and duct work. We provide comprehensive support from design to manufacturing and maintenance for equipment tailored to your needs. ● Modifications of equipment for layout changes, including heavy cargo transportation ● Various construction work associated with the manufacturing and relocation of preceding and succeeding equipment, etc. [Examples of what we can handle] ■ Heavy cargo transportation ■ Moving, relocating, and installation ■ Duct relocation ■ Air conditioning and electrical work ■ Oil mist dust collector manufacturing ■ Conveyor modifications and manufacturing ■ Modifications and manufacturing of ancillary equipment If you consult with us, we will handle everything consistently! Please feel free to reach out.

• Machinery and equipment installation/dismantling/relocation
• Conveyor
• Mechanical Design

At Witec Service Co., Ltd., we accept orders for the design and manufacturing of specialized machines. We can provide a comprehensive response from design to manufacturing to maintenance, tailored to your needs. 【Common Requests and Suggestions】 Issue 1: We want to automate manual work ⇒ We suggest improving work efficiency through automation. Issue 2: We want to address issues with manufacturing stage impacts ⇒ We suggest stabilizing quality through process improvement. 【Examples of Production (One Example)】 ■ Work inversion device ■ Film cleaning clamp ■ Automatic rotation and sliding device ■ Conveying device Trial runs are also possible at our testing facility. Please feel free to contact us.

• Other conveying machines
• Mechanical Design

At Witec Service Co., Ltd., we offer can manufacturing services (can processing). We can provide comprehensive support from design to maintenance. Regardless of whether it is metal or non-metal, we can accommodate welding processing and small lot production. 【Production Achievements (Examples)】 - Stainless steel tanks, stainless steel piping - Aluminum jigs - Iron work platforms, machine platforms - Pressure vessels - Dust collectors - Water gates - Hoppers, etc. *Please feel free to contact us.

• Contract manufacturing

Traditionally, in belt conveyors for sludge transport, it was necessary to create and install expensive enclosures for odor control. However, the "shaftless screw conveyor" that our company handles is completely sealed at the shaft, eliminating any issues with odors or spillage of transported materials! By preventing spillage of transported materials, we significantly reduce the labor required for daily maintenance and cleaning, while also improving the working environment around the conveyor. Furthermore, the absence of a shaft allows for a larger transport capacity, greatly enhancing transport efficiency. 【Features of the Shaftless Screw Conveyor】 - No shaft means no entanglement of transported materials - Capable of steep incline transport - Versatile combinations possible - Low noise - Completely sealed - Capable of long-distance transport *For more details, please refer to the PDF document or feel free to contact us.

• Conveyor
• Other conveying machines

The "shaftless screw conveyor" we handle has no shaft, so there is no concern about blockage due to adhesion, and a major feature is that the conveyed materials do not get entangled. ⇒ For this reason, even linear or string-like materials can be conveyed without any issues! With traditional shafted screw conveyors, it has been difficult to transport materials like pulp and dregs, but our system can easily handle them. 【Case Study (Transport Issues of Pulp Dregs in the Paper Industry)】 ◎ Challenge: When pulp dregs are transported on a belt conveyor, there is a spillage issue, and transporting them with a shafted screw conveyor often leads to blockages due to entanglement with the shaft because of their fibrous nature. ◎ After adopting our product: With the shaftless screw, the above problems do not occur due to its complete sealing and shaftless design. It has been successfully implemented in paper companies and has received positive feedback. 【Features of the Shaftless Screw Conveyor】 - No shaft means materials do not get entangled - Capable of steep incline transport - Versatile combinations possible - Low noise - Complete sealing - Capable of long-distance transport *For more details, please refer to the PDF document or feel free to contact us.

• Conveyor
• Mechanical Design
• Other conveying machines

"Water spills from the basket, and the floor becomes soaked... Cleaning up spilled vegetable scraps, fruit scraps, and water every day is a hassle..." Do you have any concerns or troubles with the transportation and processing of vegetable scraps, fruit scraps, etc.? The 'Non-Axis Screw Conveyor' solves the time and labor involved in transporting and processing vegetable scraps and fruit scraps generated during peeling and other tasks! Since the screw has a cantilever structure, it can transport up to 32 meters with a single unit. There are no issues with odors or spillage of transported materials, and without an axis, there is no worry about clogging due to adhesion. 【Features】 ■ No axis means no tangling of transported materials ■ Capable of steep incline transportation ■ Versatile combinations possible ■ Low noise ■ Completely sealed ■ Capable of long-distance transportation *For more details, please refer to the PDF materials or feel free to contact us.

• Other conveying machines
• Conveyor
• Mechanical Design

"Dealing with the large amounts of metal shavings generated daily is tough..." "The conveyor gets tangled or clogged with shavings and stops..." The 'Non-Axis Screw Conveyor' for transporting shavings solves these common concerns and problems related to the transport and processing of shavings! It can transport at an incline of 0° to 90°. Without an axis, there is no worry about blockages due to adhesion. Additionally, there are no bearings at the end of the conveyor, so there are no restrictions on connecting equipment, and it rotates on a resin liner at low speeds, so noise during transport is not an issue. 【Features】 ■ No axis means no tangling of transported materials ■ Capable of steep incline transport ■ Versatile combinations possible ■ Low noise ■ Completely sealed ■ Capable of long-distance transport *For more details, please refer to the PDF document or feel free to contact us.

• Other processing machines
• Conveyor
• Mechanical Design

We would like to introduce our "Shaftless Screw Conveyor." Compared to conventional shafted screws used in conveying processes, the absence of a shaft eliminates the risk of entanglement or blockage of the conveyed materials. Our product solves the time and labor involved in transporting and processing cutting debris, vegetable scraps, and fruit scraps generated during cutting and peeling operations! The screw has a cantilever structure, allowing it to convey materials up to 32 meters with a single unit, and since there are no bearings at the conveyor's end, there are no restrictions on connecting equipment. **Features of the Shaftless Screw Conveyor:** - No shaft means no entanglement of conveyed materials - Capable of steep incline conveying - Versatile combinations available - Low noise - Completely sealed - Capable of long-distance conveying - Can accommodate demo tests with incoming materials - Manufactured domestically - Trial testing facility available *For more details, please refer to the PDF document or feel free to contact us.*

• Other conveying machines

At Witec Service, we are committed to responding to our customers' various requests in a one-stop manner, conducting our operations daily. We solve our customers' problems with skilled techniques and ideas tailored to the site. We also promptly respond to inquiries regarding safety measures, operational efficiency, and labor-saving solutions. Please feel free to entrust us with the design and production of specialized machinery. 【Business Contents】 ■ Design and production of shaftless screw conveyors ■ Machine design and production ■ Metal fabrication ■ Heavy cargo transportation and installation ■ Electrical work and sequencing ■ Factory maintenance and preservation ■ Trial testing facilities *For more details, please refer to the PDF materials or feel free to contact us.

• Mechanical Design
• Machinery and equipment installation/dismantling/relocation
• Conveyor