Renas List of Products and Services

The "SENT-USB" is an interface that connects a 2-channel SAE J2716 (Single Edge Nibble Transmission - SENT) to USB, allowing easy connection of the SENT bus to any computer with a USB port. This converter is powered via USB and features two bidirectional SENT channels and a USB virtual COM port. The device comes with a free PC application that allows for analysis and simulation of SENT communication. 【Features】 ■ SENT to USB interface ■ SENT logger/tester/simulator ■ Two independent SAE J2716 (SENT) channels ■ Each channel can be set as RX or TX ■ USB powered ■ USB interface (virtual COM port) *For more details, please refer to the related links or feel free to contact us.

• Other electronic parts

The "SAE J2716 (SENT) to RS-232/CAN Bus Gateway" is a product equipped with two bidirectional SENT channels, two analog output channels, and an RS-232 or CAN bus interface. The flexibility of this device allows users to utilize it as a PC interface/SENT data logger, a gateway for PLCs or test systems, and generally for monitoring and simulating SENT communication. The analog output provides the capability to directly convert SENT data frame signals into analog voltage. 【Features】 ■ SENT-to-CAN or SENT-to-RS-232 gateway ■ SENT logger/tester/simulator ■ Two SAE J2716 (SENT) channels ■ Each channel can be configured as RX or TX, and the channels are independent ■ Supports high-speed messages and low-speed messages compliant with SAE J2716:2016 (high-speed, short serial, and extended serial) *For more details, please refer to the related links or feel free to contact us.

• Other electronic parts

The "SAE J2716 Interface" is a device equipped with four SENT channels, an Ethernet port, a USB port, CAN (/FD) channels, four analog channels, and a MicroSD card slot. It can be used as a SENT to Ethernet/USB/CAN (/FD) gateway, a SENT-analog converter, a standalone SENT and CAN (/FD) data logger, or as an Ethernet-CAN (/FD) or USB-CAN (/FD) interface. Please feel free to contact us for inquiries. 【Specifications (excerpt)】 ■ Four bidirectional SENT channels ■ Support for high-speed, short serial, and extended serial message formats ■ Support for Short PWM Code (SPC) ■ Ethernet (10/100) ■ CAN (/FD) ■ USB 2.0 *For more details, please refer to the related links or feel free to contact us.

• Other electronic parts

The "MACH-ETH" is an in-vehicle network interface equipped with one Ethernet port, two CAN FD channels, a LIN channel, USB and RS-232 ports, and multiple I/Os. This device can function as an Ethernet-CAN(/FD), Ethernet-LIN, USB-CAN(/FD), USB-LIN interface, and CAN(/FD)-LIN gateway, allowing user applications to be executed directly on the device through user script functionality. Additionally, with open communication protocols, it enables access to CAN(/FD) and LIN channels via Ethernet or USB, allowing for the sending and receiving of frames. 【Features】 ■ 10/100 Ethernet port ■ Two CAN-HS channels supporting CAN FD ■ LIN channel ■ USB 2.0 ■ RS-232 *For more details, please download the PDF or feel free to contact us.

• Other electronic parts

The "10BASE-T1S Media Gateway" is a flexible 10BASE-T1S switch equipped with a CAN(/FD) gateway and user programming capabilities. This device features one 10BASE-T1S port, one Fast Ethernet port, a CAN channel supporting CANFD, and a USB2.0 port. It can be used as a 10BASE-T1S Ethernet switch that enables bidirectional communication between the 10BASE-T1S port, the standard Ethernet port, and the MCU, or as an Ethernet-CAN(/FD) gateway that provides a data bridge between the Ethernet port and the CAN(/FD) channel. 【Features】 ■ 10BASE-T1S automotive Ethernet switch ■ 10BASE-T1S–CAN(/FD) gateway ■ Onboard switch for basic configuration ■ Built-in web server for advanced settings and status information *For more details, please download the PDF or feel free to contact us.

• Communications

The "100BASE-T1 Media Gateway" is a configurable in-vehicle Ethernet switch and communication bridge. This device can be used as a frame sniffer (active TAP) with packet forwarding capabilities, or as an Ethernet-CAN (/FD) gateway, allowing for bidirectional data transfer between any Ethernet port and a CAN or CANFD network. It also features three 100BASE-T1 ports, one Gigabit Ethernet (1000BASE-T or 10/100BASE-TX) port, two CAN (/FD) channels, a LIN bus, and a USB port. 【Features】 ■ 3x100BASE-T1 ports ■ 1x1000BASE-T port (Gigabit Ethernet) ■ All Ethernet ports are "switched" (including MCU) ■ 2xCAN (/FD) ■ LIN bus ■ USB 2.0 *For more details, please download the PDF or feel free to contact us.

• Communications

"MATEnet" enables the connection between 1000BASE-T1/100BASE-T1 networks and USB3.1 ports. This device is equipped with TEMATEnet and USB3.1 Type-C connectors, and when connected to a PC, it functions as a standard network interface card. It is an ideal tool for connecting 100BASE-T1/1000BASE-T1 ECUs or networks to computers or laptops without internal network cards, such as ultrabooks or mini PCs. 【Features】 ■ Automotive Ethernet - USB3.1 Network Interface Card ■ Support for 1000BASE-T1 and 100BASE-T1 ■ 100/1000Mbit full-duplex communication ■ Accelerated automatic negotiation or manual selection ■ Master/slave auto-negotiation or manual selection ■ IEEE and legacy modes *For more details, please download the PDF or feel free to contact us.

• Other electronic parts

The "MATEnet (H-MTD)" achieves full-duplex physical layer conversion between 1000BASE-T1 and 1000BASE-T, or 100BASE-T1 and 100BASE-T networks, and is equipped with TE MATEnet and RJ-45 connectors. Communication speed and master/slave settings can be auto-negotiated with the link partner or manually configured by the user. Using the USB port (VCP), you can read the device status and diagnose the ports. This device can also be used as a USB-CAN (/FD) interface. 【Features】 ■ Conversion from automotive Ethernet to standard Ethernet ■ Support for 1000BASE-T1 and 100BASE-T1 ■ 100/1000Mbit full-duplex communication ■ Accelerated auto-negotiation or manual selection ■ Master/slave auto-negotiation or manual selection ■ IEEE and legacy modes *For more details, please download the PDF or feel free to contact us.

• converter

The "DPA XL" is DG's advanced TMC RP1210 compliant Dearborn Protocol Adapter (DPA), a device that incorporates current and future technologies for years of shop service. It is suitable for diagnostics and reprogramming of large, medium, and some small vehicles. It covers the road, bus, construction, agriculture, military, industrial fixed equipment, and fleet vehicle segments. 【Features】 ■ Fully compliant with TMC RP1210A/B/C ■ SAE J2534 compliant (04.04 and 05.00) ■ Four independent CAN channels ■ 2-channel CAN FD support ■ 1-channel FT support ■ Built-in Hardware Security Module (HSM) *For more details, please refer to the related links or feel free to contact us.

• Other electronic parts

The "VSI-NsGen" is a device that supports CAN FD and FT CAN with four independent CAN channels. It is compatible with emission-related programming required by many vehicle manufacturer models. With OBDII diagnostic functions for light and medium vehicles, it allows quick access to all emission-related information. 【Main Features (Partial)】 ■ Repair rights, OE/dealer-level module programming, vehicle diagnostics, vehicle security system access, key programming, ADAS calibration ■ Test use by OEMs ■ Ensures secure connection and communication from PC to vehicle ■ Recording and analysis of vehicle network data *For more details, please refer to the related links or feel free to contact us.

• Other electronic parts

The "CANlink wireless 4000" is a wireless CAN interface that replaces complex cable connections by building an affordable wireless CAN bridge on-site using Wi-Fi and Bluetooth connections. It can be directly connected to the machine's CAN bus, allowing for the replacement of old cables with a new wireless bridge and network. This enables the management of multiple machine processes through a single interface, improving overall machine performance and allowing for cost management. 【Features】 ■ Easy-to-implement wireless solution that connects directly to the machine's CAN bus ■ Developed with simplicity in mind ■ Low-latency bidirectional communication ■ Hardware configurable to meet needs via CAN or Bluetooth *For more details, please refer to the related links or feel free to contact us.

• Other electronic parts

The "Kvaser Leaf v3" is an easy and low-cost product that connects a PC to a CAN bus network for monitoring and transmitting CAN and CAN FD data. Its sophisticated ergonomically designed housing provides sufficient robustness for everyday use while being suitable for applications with space constraints. It can process up to 20,000 messages per second, with each message timestamped with an accuracy of 50 microseconds. 【Features】 ■ USB CAN interface ■ Powered via USB Type A connector ■ Supports CAN FD up to 8 Mbit/s ■ Quick and easy plug-and-play installation ■ Supports both 11-bit (CAN 2.0A) and 29-bit (CAN 2.0B active) identifiers ■ Supports silent mode for analysis tools - connects to the bus without interference *For more details, please refer to the related links or feel free to contact us.

• Other electronic parts

The Kvaser U100P is a 1-channel CAN/CAN FD 9-Pin D-Sub-USB interface. The Kvaser U100 series is robust, electrically reinforced, and features isolated signals and power. It establishes a new standard in CAN interface design by providing enhanced electrical protection, a housing that is resistant to vibration, shock, and drops, and high-quality cables. This model is based on the Kvaser U100 (01173-1). 【Features】 - Supports CAN FD up to 8Mbit/s (using appropriate physical layer implementation) - Supports both 11-bit (CAN 2.0A) and 29-bit (CAN 2.0B active) identifiers - Supports silent mode for analysis tools - connects to the bus without interference - Enhanced galvanic isolation, designed and verified to withstand 5000VACrms for 60 seconds - Timestamping at 20,000msg/s with a resolution of 1μs - Kvaser MagiSync - automatic time synchronization *For more details, please refer to the related links or feel free to contact us.

• Other electronic parts

The "Kvaser USBcan Pro 4xHS" is a high-performance 4-channel CAN bus interface. It allows for quick and flexible real-time connections between a PC and multiple CAN buses. All channels are configured for high-speed CAN (ISO 11898-2), processing the transmission and reception of standard/extended CAN messages with high-precision timestamps. It is compatible with CAN FD devices. 【Features】 ■ Supports CAN FD ■ Quick and easy plug-and-play installation ■ Supports both 11-bit (CAN 2.0A) and 29-bit (CAN 2.0B active) identifiers ■ USB bus powered ■ Isolated ■ High-speed CAN connection (compliant with ISO 11898-2), up to 1 Mbps *For more details, please refer to the related links or feel free to contact us.

• Other electronic parts

We would like to introduce the 'EtherCAN-S7' handled by Renas Corporation. This product is a gateway for SIEMENS PLC that can be configured using the SIMATIC Manager. It features a CAN interface compliant with ISO 11898, with a maximum bit rate of 1Mbit/s. 【Features】 ■ Provides CAN link to SIEMENS S7 PLC ■ Reliable link via Industrial Ethernet/UDP ■ 10/100 Base T Ethernet gateway ■ CAN interface compliant with ISO 11898, with a maximum bit rate of 1Mbit/s ■ Configurable via SIMATIC Manager *For more details, please refer to the related links or feel free to contact us.

• Other electronic parts

We would like to introduce 'CoDeSys Programming' handled by Renas Corporation. CoDeSys enables complete integration of input and output variables via CAN bus. Native code generation for target processors 683xx and PowerPC provides optimal use for control systems on the ESD platform. 【Features】 ■ IEC61131-3 programming tool ■ Support for all programming languages of IEC61131-3 ■ Native code generation for target processors 683xx and PowerPC provides optimal use for control systems on the ESD platform ■ CoDeSys enables complete integration of input and output variables via CAN bus * You can download the English version of the catalog. * For more details, please refer to the PDF materials or feel free to contact us.

• controller
• Development support tools (ICE, emulators, debuggers, etc.)

We would like to introduce the 'VME-IPOS-2' handled by Renas Corporation. This product is a 5-axis position controller that can be easily operated via a shared RAM interface (256kbyte). It features five incremental encoder inputs, each equipped with index inputs that use 24V. 【Features】 ■ 5× enable outputs 24V/3×0.6A and 2×0.3A nominal current, short-circuit protection ■ Analog outputs x5 for DC and servo motors, ±10V/12-bit ■ All input and output electrically isolated ■ MC68331 microcontroller/25MHz ■ Easy handling via shared RAM interface (256kbyte) *For more details, please refer to the related links or feel free to contact us.

• Other electronic parts

We would like to introduce the 'VME-ISER12' handled by Renas Corporation. This product is a high-performance board equipped with 12 serial interfaces. It features an LED display on the front panel and a test socket, and it can perform functions and connections compatible with the VME-ISER8. 【Features】 ■ 8-channel controller AB82538 ■ 4 additional interfaces via CPU's SCC ■ Minimum 38.4kBaud / 12 channels simultaneously ■ 2 x 50-pin post connectors for ESP360 adapter board ■ CPU 68360 / 33MHz * You can download the English version of the catalog. * For more details, please refer to the PDF materials or feel free to contact us.

• Other electronic parts

Renas Corporation handles the process IO 'VME-DPIO32/63140', which has a wide voltage range. All 32 outputs can be programmed for pulse width modulation (PWM) or gate control. The inputs are overvoltage protected between -3VDC and +35VDC. 【Features】 ■ 32 digital inputs with interrupts, 5–30VDC ■ 32 digital outputs, 6–28VDC/0.3A ■ Counter: 4 inputs programmable as counters ■ All I/O electrically isolated * You can download the English version of the catalog. * For more details, please refer to the PDF document or feel free to contact us.

• Other electronic parts

We would like to introduce the 'VME-DAC1612' handled by Renas Corporation. This product is a general-purpose analog output board capable of 16 analog outputs. It is compatible with the IEEE1014 rev. C.1 VMEbus, with SADO24 and SD16 VMEbus access. It features electrical insulation via optical couplers. 【Features】 ■ 12-bit resolution, 5μs settling time ■ Multiple output voltage ranges available, current output (optional) ■ Buffered output, short-circuit protection ■ Electrical insulation via optical couplers ■ VMEbus compatibility: IEEE1014 rev. C.1 ■ VMEbus access: SADO24, SD16 * You can download the English version of the catalog. * For more details, please refer to the PDF materials or feel free to contact us.

• Other electronic parts

We would like to introduce the 'VME-AIO16' handled by Renas Corporation. This product is a high-performance board equipped with 16× analog inputs and 4× analog outputs. It enables high data throughput through local intelligence and allows for simple operation via a shared RAM interface. ■ Electrical isolation for analog input/output ■ High data throughput through local intelligence ■ Simple operation via shared RAM interface ■ CPU68340/25MHz ■ VMEbus compatibility: IEEE1014 rev. C.1 ■ VMEbus access: SD16 * You can download the English version of the catalog. * For more details, please refer to the PDF materials or feel free to contact us.

• Other electronic parts

We would like to introduce the 'VME-ADTH16' handled by Renas Corporation. This product features 16 analog thermal inputs with cold junction compensation and uses an additional 8-bit digital output port at TTL level. The input signals can be thermocouples or 0-10V, 0(4)-20mA for each channel. 【Features】 ■ 16 analog thermal inputs with cold junction compensation ■ 12-bit resolution ■ Input signals: thermocouples or 0-10V, 0(4)-20mA for each channel ■ Certified thermocouple types (e.g., many others available) ■ Each channel can be individually calibrated * You can download the English version of the catalog. * For more details, please refer to the PDF document or feel free to contact us.

• Other electronic parts

We would like to introduce the 'VME-P2-ADAPT' handled by Renas Corporation. It comes without an optional 3U/16, 6U/8HP front panel or two 32-pin HP front panels, or two 34-pin Varioface modules. Compatible ribbon cables for the general-purpose P2 I/O adapter are included with the product. 【Features】 ■ General-purpose P2 I/O adapter ■ Connection using screw terminal blocks or clamp terminal blocks ■ Optional 3U/16, 6U/8HP front panel or two 32-pin HP front panels, or two 34-pin Varioface modules ■ Compatible ribbon cables are included with the product *For more details, please refer to the related links or feel free to contact us.

• Other machine elements
• AC adapter

We would like to introduce the 'SIMM07-2' handled by Renas Corporation. This is an RS-422/EIA-530 interface that can be used via the CPU front panel (female 25-pin D-sub connector) and VMEbus-P2. It is configured for the MVME162 serial port module connectors J10/J15 and supports a bit rate of 38.4 kbit/s. 【Features】 ■ Configured for MVME162 serial port module connectors J10/J15 ■ Supports a bit rate of 38.4 kbit/s ■ Add-on using the physical interface for the serial controller of Motorola MVME162 *For more details, please refer to the related links or feel free to contact us.

• Other machine elements

We would like to introduce the 'MVME-TR2' handled by Renas Corporation. This product is a P2 adapter for MVME177, -172, -167, -162, -147, -4600, -3600, -2700, and -2600. It uses backplane wiring for a 19-inch system designed for direct plug-in in accordance with IEEE1101. 【Features】 ■ CENTRONICS interface via 26-pin post connector ■ SCSI interface via 50-pin post connector ■ AUI port via 15-pin D-sub connector ■ 100BASE-TX (twisted pair) via RJ45 connector ■ Serial interface via 9-pin D-sub connector *You can download the English version of the catalog. *For more details, please refer to the PDF materials or feel free to contact us.

• Other machine elements

We would like to introduce the 'ESP360' handled by Renas Corporation. It features external connector plugs that can be selected as software, solder bridge, or wiring bridge, equipped with RS-232, RS-422, and RS-485. Additionally, it incorporates a serial interface via six 15-pin high-density D-sub female connectors. 【Features】 ■ Adapter module for GreenSpring IP-Comm360 and ESD-VME-ISER12 ■ Electrical insulation ■ External connector plugs that can be selected as software, solder bridge, or wiring bridge, RS-232, RS-422, RS-485 ■ Serial interface x6 via 15-pin high-density D-sub female connectors ■ Front panel wiring for 19'' systems * You can download the English version of the catalog. * For more details, please refer to the PDF document or feel free to contact us.

• Other machine elements

We would like to introduce the 'VME-PMC-CPU/2-CC' handled by Renas Corporation. With 2Gbyte NAND flash, it is capable of running complex and ambiguous operating systems and user applications. This product is a high-performance, multifunctional CPU that complies with VITA42.3 and supports 2eVME and 2eSST high-speed protocols with a single XMC. 【Features】 ■ Powerful VME-PCI bridge Tundra Tsi148 ■ 4-level VME arbiter and address space, maximum A64/D64 ■ VME64 expansion function connector ■ Master or slave functionality ■ High-efficiency PowerPC MPC8349, 533MHz * You can download the English version of the catalog. * For more details, please refer to the PDF materials or feel free to contact us.

• Other machine elements

We would like to introduce the 'VME-PMC-CADDY/2' handled by Renas Corporation. It offers a wide temperature range through conduction cooling or an extended temperature range version. This product is certified for many industrial applications and is designed for low power consumption and easy cooling. 【Features】 ■ Powerful VME-PCI bridge Tundra Tsi148 ■ 4-level VME arbiter and address space, up to A64/D64 ■ VME64 expansion function connector ■ Master or slave functionality ■ 2eVME and 2eSST high-speed protocols ■ PCI 64-bit at 66MHz, 3.3V only * You can download the English version of the catalog. * For more details, please refer to the PDF materials or feel free to contact us.

• Other machine elements

We would like to introduce the 'VME-PMC-CADDY' handled by Renas Corporation. This product is a VME carrier board for PMC modules that can accommodate two single or one double-sized PMC modules. It is equipped with a plug-in unit compliant with the specified IEEE P1386/draft 2.0. 【Features】 ■ Plug-in unit compliant with the specified IEEE P1386/draft 2.0 ■ Capable of accommodating two single or one double-sized PMC modules ■ VME-PCI bridge UNIVERSE CA91C042 ■ All PMC I/O is applicable to VMEbus P2 ■ Option "-32P2": different P2 pin assignment ■ VMEbus interface * You can download the English version of the catalog. * For more details, please refer to the PDF materials or feel free to contact us.

• Other machine elements

We would like to introduce the 'VME-PMC-CPU/2' handled by Renas Corporation. This product is a high-performance, multifunctional CPU that can run complex and ambiguous operating systems and user applications, thanks to its 2Gbyte NAND flash. It features standard interfaces and form factors compliant with IEEE P1386-2001 and IEEE 1014 Rev.D. 【Features】 ■ Powerful VME-PCI bridge Tundra Tsi148 ■ 4-level VME arbiter and address space, up to A64/D64 ■ VME64 expansion connector ■ Master or slave functionality ■ High-efficiency PowerPC MPC8349, 533MHz * You can download the English version of the catalog. * For more details, please refer to the PDF materials or feel free to contact us.

• Other machine elements

We would like to introduce the 'VME-CAN4' handled by Renas Corporation. This product is a 4-channel CAN-compatible intelligent board equipped with a microcontroller and CAN controller for each channel. It features a CAN interface compliant with ISO 11898, with a maximum bit rate of 1 Mbit/s. 【Features】 ■ CAN controller with integrated firmware ■ Microcontroller and CAN controller equipped for each channel ■ VMEbus data conversion using shared RAM and FIFO ■ Microcontroller: 4×MOTOROLA 68331, 20MHz ■ 4×256Kbytes SRAM * You can download the English version of the catalog. * For more details, please refer to the PDF materials or feel free to contact us.

• Other machine elements

The "XMC-CPU/2041" is an FPGA-equipped XMC/PMC Quad Core PowerPC CPU. It features a Freescale PowerPC QorIQ P2041 running at 1.2GHz, with three Ethernet ports and one USB 2.0 port. There are hardware options available, including PowerPC at 1.5GHz, a maximum DRAM capacity of 2GB + ECC, and Precision Time Protocol (PTP) synchronization over Ethernet, so please feel free to contact us if you have any inquiries. 【Features】 ■ Freescale PowerPC QorIQ P2041, 1.2GHz ■ Xilinx FPGA Spartan 6 XC6LXT-45T for local applications ■ 3x Ethernet, 1x USB 2.0 ■ 52 LVTTL I/O via connector PMC-P14 ■ Operating state functionality and fallback flash * For more details, please refer to the PDF document or feel free to contact us. * An English version of the catalog is available for download.

• Other electronic parts

We would like to introduce the PowerPC PrPMC module 'PMC-CPU/440' that we handle. This product is part of the "PMC/XMC series" and features the PowerPC AMCC PPC440EPx, upper layer CAN protocol, various interfaces via Pn4, and I/O capabilities. Please feel free to contact us if you have any inquiries. 【Features】 ■ PowerPC AMCC PPC440EPx ■ Upper layer CAN protocol * For more details, please refer to the PDF materials or feel free to contact us. * You can download the English version of the catalog.

• Other electronic parts

We offer the "PCIe-XPIMC-Carrier" that adapts PMC, XMC, and PIM to PCs. It complies with PMC/XMC standards and industrial requirements, including PMC IEEE1386-2001, fan cooling for PMC/XMC boards, and additional mounting points at the top of the card. Additionally, it features a flexible cable wiring concept. 【Features】 ■ Adapts PMC, XMC, and PIM to PCs ■ Slot for one PMC or XMC board ■ Slot for one PIM mezzanine card ■ Complete J4 routing to PIM ■ Active carrier (PCIe-PCI bridge) * For more details, please refer to the PDF document or feel free to contact us. * An English version of the catalog is available for download.

• Other electronic parts

"EtherCAT Workbench" is a comprehensive EtherCAT configuration tool that creates network configuration files and initializes and monitors EtherCAT networks. It features a built-in EtherCAT master that supports online topology scanning, exports ENI configuration files, and configures based on the device's EEPROM ESI files or ESI data. The application supports both offline and online modes. 【Features】 ■ Creates network configuration files and initializes and monitors EtherCAT networks ■ Built-in EtherCAT master that supports online topology scanning ■ Configuration based on the device's EEPROM ESI files or ESI data ■ Application supports both offline and online modes *For more details, please refer to the PDF materials or feel free to contact us. *You can download the English version of the catalog.

• Other network tools
• Server monitoring and network management tools

The "EtherCAT Slave" is an EtherCAT slave stack that contributes to the easy and rapid development of EtherCAT slave devices. The source code is written in ANSI-C with respect to performance and resource usage, and is optimized for embedded targets. The API-based interface clearly distinguishes between the application and the stack. This allows for easy changes to updated stack revisions or different hardware later on. 【Features】 ■ Easy-to-use application programming ■ Complex parts of the protocol and hardware dependencies are not exposed ■ Developers can focus on application development, significantly shortening the development time to productization ■ Supports multiple ESCs in a single application * For more details, please refer to the PDF materials or feel free to contact us. * An English version of the catalog is available for download.

• Server monitoring and network management tools
• Other network tools

The "EtherCAT Master" is a versatile EtherCAT master stack for configuring and managing EtherCAT networks, as well as for regular process data exchange. It features an advanced API that allows for a consistent interface between applications and the EtherCAT master stack across all operating systems. Additionally, it is equipped with detailed diagnostic and profiling capabilities, making it compatible with common (real-time) operating systems. 【Features】 ■ Written in ANSI-C, achieving high performance, low resource usage, and excellent scalability ■ The core components of the stack software are independent of the operating system and CPU architecture ■ EtherCAT Master Class A compliant with ETG.1500 *For more details, please refer to the PDF documentation or feel free to contact us. *An English version of the catalog is available for download.

• Server monitoring and network management tools
• Other network tools

The "ECX-PoE-PE" supplies 24V power to the InRailBus as a "Power Extractor." It can be used with ECX and CBX modules, and the power is supplied via Ethernet connection (PoE). It is a compact DIN rail module designed for installation on DIN-EN rails. The connector and status LED are located on the front panel. 【Features】 ■ 24V DC power supply for InRailBus via "Power over Ethernet" (PoE) ・ 24V DC output voltage with a maximum output of 24W ■ "Power Extractor" for installation using DIN-EN rails ・ Designed for TS35 DIN-EN rails ・ InRailBus technology is very user-friendly and has proven reliability ■ Applicable to ECX and CBX devices * For more details, please refer to the PDF document or feel free to contact us. * You can download the English version of the catalog.

• Other power sources

The "ECX-Master-Selector" is a dual Ethernet master selector suitable for two redundant masters such as EtherCAT, Sercos III, and PROFINET. Designed for installation using DIN-EN mounting rails, this module can be easily connected to the supply voltage. You can connect the supply voltage using the InRailBus connector integrated into the mounting rail or through clamp-type power connectors. 【Features】 <Optical Isolation Switching Signal> ■ The switching signal is galvanically isolated ■ Characteristics compliant with DIN EN 61131-2, Type 3 ■ Installation using DIN-EN rails ■ Physical elements of Ethernet compliant with IEEE 802.3 * For more details, please refer to the PDF documentation or feel free to contact us. * An English version of the catalog is available for download.

• Other electronic parts

The "ECX-EC" is an EtherCAT slave bridge used to connect two EtherCAT segments. Therefore, this bridge implements two complete EtherCAT slave interfaces, allowing connection to the two segments. By using this product, you can exchange process data between two EtherCAT segments. 【Features】 ■ Integration of two EtherCAT slave devices ■ Exchange of process data between two EtherCAT networks ■ Time synchronization (DC) between EtherCAT masters ■ Support for redundant DC ■ Physical elements of Ethernet compliant with IEEE 802.3 *For more details, please refer to the PDF document or feel free to contact us. *You can download the English version of the catalog.

• Other electronic parts

The "ECX-DIO8" is a module equipped with 8 digital I/O that can be used individually as inputs or outputs. The nominal voltage for the I/O is 24V, and the nominal output current is 0.5A at 24V. It not only provides industrial digital input and output but also allows for easy connection of the supply voltage. You can connect the supply voltage using the InRailBus connector integrated into the mounting rail or through a clamp-type power connector. 【Features】 ■ Compact I/O module ・ Digital I/O x 8 ・ Power supply via InRailBus or individual power supply via COMBICON connector ■ Easy configuration ・ Configuration via EtherCAT master (XML file) * For more details, please refer to the PDF materials or feel free to contact us. * An English version of the catalog is available for download.

• Other electronic parts

The "ECS-PCIe/1100" is an EtherCAT that can be used with all PCs. It features EtherCAT slave functionality via the Ethernet physical layer and directly maps the ET1100 ESC address space to the PCI Express address space. Configuration by ESD's EtherCAT master. Sample device description files (ESI files in XML format) are provided. 【Features】 ■ EtherCAT that can be used with all PCs ■ Configuration and application development using ESD's tools ■ EtherCAT slave functionality via the Ethernet physical layer ・Direct mapping of the ET1100 ESC address space to the PCI Express address space ・Compliant with PCI Express specification R1.0a * For more details, please refer to the PDF materials or feel free to contact us. * An English version of the catalog is available for download.

• Other electronic parts

The "DN-PCI/331" is a high-performance PCI-DeviceNet interface. With local master/scanner firmware, it frees users from lower-level DeviceNet protocols. It allows for dynamic firmware updates via download with a common API certified for various operating systems. 【Features】 ■ High-performance DeviceNet interface x2 on PCI board ■ Onboard microcontroller for local data management ■ Compliant with DeviceNet specification 2.0 ■ Common API certified for various operating systems ■ Dynamic firmware updates possible via download *For more details, please refer to the PDF document or feel free to contact us. *An English version of the catalog is available for download.

• Other electronic parts

The "DN-PC104/331" is a high-performance DeviceNet interface for PC/104 boards. It features an onboard microcontroller for local data management, which frees users from the lower-level DeviceNet protocol through local master/scanner firmware. Please feel free to contact us if you have any inquiries. 【Features】 ■ High-performance DeviceNet interface for PC/104 boards ■ Onboard microcontroller for local data management * For more details, please refer to the PDF materials or feel free to contact us. * An English version of the catalog is available for download.

• Other electronic parts

The "DN-DP" is a gateway that operates as a PROFIBUS DP slave I/O component. In the DeviceNet network, this product can function as a scanner controlling multiple DeviceNet slave devices, or as a single slave device connected to one DeviceNet scanner. This module is always configured using the PROFIBUS DP master configuration tool. 【Features】 ■ DeviceNet-PLC link to SIEMENS S7-1500, S7-1200, S7-400, S7-300, etc. ■ Capable of specifying addresses for up to 40 DeviceNet slave devices ■ Operates as a DeviceNet scanner or slave ■ DeviceNet slave devices can have a maximum of 240 bytes of user data per direction ・ However, when used bidirectionally, there is a total limit of 312 bytes * For more details, please refer to the PDF documentation or feel free to contact us. * An English version of the catalog is available for download.

• Other electronic parts