セキュリティハウス List of Products and Services

For more details, please refer to the basic information.

• Other security and surveillance systems

For more details, please refer to the basic information.

• Other security and surveillance systems

For more details, please refer to the basic information.

• Other security and surveillance systems

For more details, please refer to the basic information.

• Other security and surveillance systems

For more details, please refer to the basic information.

• Other security and surveillance systems

For more details, please refer to the basic information.

• Other security and surveillance systems

For more details, please refer to the basic information.

• Other security and surveillance systems

For more details, please refer to the basic information.

• Other security and surveillance systems

For more details, please refer to the basic information.

• Other security and surveillance systems

For more details, please refer to the basic information.

• Other security and surveillance systems

■Features ●Can be installed on "walls" or "switch boxes" indoors. ●Can also be used on "nageashi" (horizontal beams) in traditional Japanese architecture, such as important cultural properties. ●Horizontal adjustment of 15° is possible at the mounting hole of the sensor base. ●The exterior is painted black to match the sensor.

• Other security and surveillance systems

For more details, please refer to the basic information.

• Other security and surveillance systems

■Features ● It is placed at the corner of the bed exit. It connects to an optional distribution outlet and nurse call sub-unit, or to a transmitter, and alerts when pressure is applied as someone moves to the corner to get out of bed. ● The sheet part is waterproof for daily life and can be disinfected and cleaned (excluding the pin plug). ● The underside is made of a non-slip material. ● Comes with a 3m cord and pin plug. ● The cord incorporates Kevlar fibers, making it resistant to strong pulling and tearing. ● Includes an intermediate switch (used for turning the sensor ON/OFF).

• Other security and surveillance systems

■Features ● The IP controller and form have been unified, allowing for installation without any sense of incongruity when placed side by side. ● The power capacity is DC12V・1.5A. ● Equipped with an emergency power supply that provides approximately 15 minutes of backup during a power outage. ● The power supply for the DC power supply unit is AC100V. ● Includes an over-discharge protection circuit that detects a drop in output voltage of the emergency power supply and stops the output. ● Includes an over-current protection circuit that detects over-current in the output and stops the output.

• Other security and surveillance systems

■Features ● This is an embedded magnetic switch that demonstrates its effectiveness when installed in places that are not visible for aesthetic reasons. ● It is suitable for doors with a wide distance from the frame due to its strong magnetic force and long set distance. ● Do not use it by directly attaching it to magnetic materials.

• Other security and surveillance systems

■Features ● When the pin is removed, a powerful alarm sound will resonate, and at the same time, the light will flash. ● DC9V battery (included), volume 130dB, continuous sounding time approximately 90 minutes, weight 100g (including battery), size W56×H70×D25mm. ● Main body: ABS resin. ● Accessories: Cord with clip, cord for door protector. ● Wall mounting bracket (sold separately). 〈Usage Precautions〉 The battery included with this product is a test battery, so it may expire before the specified usage time is reached. Please replace the test battery with a new one as soon as possible.

• Other security and surveillance systems

■Malfunction Prevention Measures ●A preliminary alarm will be triggered before the main alarm to indicate changes in status (malfunction prevention measures) ●The main unit and subunit have unique ID codes, so only paired units will operate. Power Saving ●Automatic power activation when the main unit and subunit are separated (power OFF when combined) ●Achieves long battery life (approximately 150 days with 8 hours of use per day)

• Other security and surveillance systems

■Features ● The AHD series allows for modulation of signals between cameras and recorders to reduce noise, extending wiring distances. <Extension Distance> - 5C-FB…Recommended 800m, Maximum 900m - 5C-2V…Recommended 600m, Maximum 700m - 3C-2V…Recommended 400m, Maximum 450m ● Install the transmitter just before the camera and the receiver just before the recorder. ● The operation indicator lights up red when power is supplied. ● Comes with a dedicated AC adapter (for the receiver side). * A DC12V or AC24V power supply is required for the transmitter side. The power supplied to the transmitter can be output from the transmitter's power output terminal to supply the camera. ● This device does not support coaxial video control (UTC) functions, so do not connect this device if you are using UTC functions. ● This device does not support power supply for overlay cameras.

• Surveillance Cameras

■Features ● The AHD camera video can be split into two outputs: AHD and analog. ● By using the HDMI output of this device, the AHD camera video can be displayed directly on a monitor. (Input: AHD BNC×1, Output: AHD BNC Thru×1, HDMI×1, Analog BNC×1) ● An AC adapter (DC12V) is included.

• Surveillance Cameras

Features ● Video input can be distributed to up to 4 video outputs. ● Small and compact design. ● Comes with a dedicated AC adapter. *This device does not support the coaxial overlay control (UTC) function, so please do not connect this device if you intend to use the coaxial overlay control (UTC) function.

• Surveillance Cameras

For more details, please refer to the basic information.

• Entrance and exit control system

For more details, please refer to the basic information.

• Entrance and exit control system

■Features ● This is a checker that measures the reception sensitivity and environmental noise of long-distance wireless systems. By measuring reception sensitivity and environmental noise, it ensures a more stable operating environment. *Note: It cannot measure the radio waves of low-power wireless systems. ● It measures reception sensitivity and environmental noise levels using an analog meter display and beep sounds. ● The receiving frequency can be switched among four frequencies. ● The type of received radio wave (transmitter, repeater, receiver, or response) can be confirmed via the indicator light. ● In radio wave confirmation mode, you can choose between "registered" mode, which only measures the radio waves of registered devices, and "non-registered" mode, which does not require registration.

• Other security and surveillance systems

■Features ● It is equipped with an operating mode that allows for relaying of long-range wireless systems and integration with existing low-power wireless systems. 1. Relay of long-range wireless systems The radio wave reach distance outdoors is approximately 1 km in line of sight, and it is possible to extend the reach of long-range wireless systems by an additional approximately 1 km. (Unlimited relaying without restrictions on the number of units) 2. Conversion of transmission waves between long-range wireless systems and existing low-power wireless systems It is possible to convert the transmission waves of existing low-power wireless systems so that they can be received by the receivers of long-range wireless systems, and vice versa, allowing long-range wireless system transmission waves to be received by existing low-power wireless system receivers. ● To ensure more reliable wireless communication even over long distances, it is equipped with a two-way communication function. ● It supports four frequency switching to reduce radio wave interference. ● It has a rainproof structure for outdoor use (equivalent to IP54). ● In cases where securing power is difficult, it can be powered by the solar-powered device BA-12SLA.

• Other security and surveillance systems

■Features ● This is a transmitter for a long-distance wireless system equipped with a push button. ● The radio wave reach distance outdoors is approximately 1 km in line of sight. ● A single push of the button sends an alarm signal. ● The display and operation sections are large and easy to press, ensuring a safe design. ● Two types of display stickers, "Emergency" and "Call," are included, allowing for selection based on usage. ● To achieve more reliable wireless communication even over long distances, it is equipped with a two-way communication function. ● It is compatible with four frequency switching to reduce radio wave interference. ● It has a waterproof structure that is safe for outdoor use (equivalent to IP67).

• Other security and surveillance systems

■Features ● This is a transmitter for a long-range wireless system that transmits contact signals via radio waves. ● The radio wave reach distance outdoors is approximately 1 km in line of sight. ● It transmits wireless signals (alarm/recovery) in response to ON/OFF signals from a voltage-free contact. ● It is equipped with a two-way communication function to achieve more reliable wireless communication even over long distances. ● It supports four frequency switching to reduce radio wave interference. ● It has a waterproof structure that ensures safety outdoors (equivalent to IP67).

• Other security and surveillance systems

■Features ● This is a transmitter for a long-range wireless system equipped with an infrared sensor. ● The radio wave reach distance outdoors is approximately 1 km in line of sight. ● It is powered by batteries, eliminating the need for power or signal wiring. ● By adopting our unique dual modulation method for the infrared beam, we have enhanced the distinguishability from ambient light (such as sunlight and car headlights), achieving reliable outdoor surveillance. ● It is equipped with an infrared sensor with a maximum detection range of 100 m and a four-beam simultaneous shielding type. ● To ensure more reliable wireless communication even over long distances, it features bidirectional communication capabilities. ● It is compatible with a four-frequency switching system to reduce radio wave interference. ● It has a rainproof structure that ensures safety outdoors (equivalent to IP65).

• Other security and surveillance systems

■Features ● This is a transmitter for a long-range wireless system equipped with a passive sensor that uses an AND detection method for horizontal and downward areas, reducing false triggers even outdoors. ● The radio transmission range outdoors is approximately 1 km in line of sight. ● The detection area consists of an upper area and a lower area, each with a horizontal coverage of 90°. ● By combining the upper and lower areas, it is possible to achieve a horizontal detection coverage of 180° with a single unit. ● The detection distance can be adjusted in 10 levels between 2 to 12 meters. ● The installation height is between 0.8 to 1.2 meters. ● To ensure more reliable wireless communication even over long distances, it is equipped with a two-way communication function. ● It features a rainproof structure that provides peace of mind outdoors (equivalent to IP54).

• Other security and surveillance systems

■Features ● This is a receiving unit for long-range wireless systems. It receives signals from various transmitters and converters of the long-range wireless system, allowing for emergency notifications such as alarms for emergencies, intrusions, and equipment abnormalities through various reporting devices and controllers. ● Up to 100 different transmitters (including linked receivers and converters) can be registered. ● Transmitters can be registered across 10 channels, with individual channel displays and separate alarm outputs, as well as a total alarm output (1 output) functioning. ● In addition to alarm outputs, it notifies of abnormalities occurring in the registered transmitters (including linked receivers and converters) through each channel and the LCD display, and is equipped with four types of outputs that operate according to the nature of the abnormality. (Tamper abnormality, regular transmission abnormality, battery depletion, environmental abnormality) ● To achieve more reliable wireless communication even over long distances, it is equipped with a two-way communication function. ● It features a linked control function that allows multiple receivers to coordinate the received content and the armed/disarmed status. (Up to 5 child units can be linked with the master unit) ● By supporting four frequency switching, it is possible to reduce radio interference when using multiple transmitters (converters).

• Other security and surveillance systems

■Equipped with a 2 Megapixel High-Sensitivity CMOS Sensor Adopting a 2 Megapixel 1/2.8 inch high-sensitivity CMOS sensor, it achieves high-definition image display with a resolution of 1920×1080. Additionally, the brightness and image quality of night vision footage have been significantly improved compared to previous models. ■Compression Method H.265 By adopting H.265, which offers even higher compression than H.264, long-duration recording is made possible. (Also supports H.264 and MJPEG) ■Adopts PoE Power Supply Method (IEEE802.3af) Power can be supplied from a PoE HUB. It can also be powered by DC12V. ■Equipped with a 4.4x Day/Night Megapixel Auto Iris Lens Equipped with a 4.4x Day/Night Megapixel auto iris lens. (Wide angle f=2.7mm to standard 12mm) Fine angle adjustments can be made according to the monitoring location. (Horizontal angle of view 108° to 32°, vertical angle of view 57° to 18°) ■Equipped with Automatic Focus Adjustment Function Angle and focus adjustments, as well as camera settings, can be made from a recorder (AHD04R-A/08R-A/16R-A) or a computer. *Camera settings can only be configured from a computer.

• Surveillance Cameras

■Features ● This is a dedicated overlay power supply for AHD cameras (960AH series). * It is also compatible with the 940AH series. ● There are two models: for 4 channels (VPS-614AH) and for 8 channels (VPS-618AH). ● The video signal input at the camera input terminal is outputted. (1 input corresponds to 1 output) ● The wiring distance can be up to 250m for 3C-2V, and up to 450m for 5C-2V/5C-FB. ● UTC operation from the DVR is possible even when using the overlay power supply. ● The dedicated EIA rack mount brackets are optional. * RK-614EI (for VPS-614AH), RK-618EI (for VPS-618AH).

• Surveillance Camera System

■Features ● This is a dedicated overlay power supply for AHD cameras (960AH series). * It is also compatible with the 940AH series. ● There are two models: for 4 channels (VPS-614AH) and for 8 channels (VPS-618AH). ● The video signal input from the camera input terminal is outputted. (1 input corresponds to 1 output) ● The wiring distance can be up to 250m for 3C-2V and up to 450m for 5C-2V/5C-FB. ● UTC operation from the DVR is possible even when using the overlay power supply. ● The dedicated EIA rack mount brackets are optional. * RK-614EI (for VPS-614AH), RK-618EI (for VPS-618AH)

• Surveillance Camera System

■Equipped with a 2 Megapixel CMOS Sensor Adopts a 2 Megapixel 1/2.8 inch progressive scan CMOS sensor, achieving high-definition image display with a resolution of 1920×1080. Additionally, the brightness and image quality of night vision footage have been significantly improved compared to previous models. ■Long-distance transmission via coaxial cable When using a combined power supply, it reduces the degradation of image quality during long-distance wiring of AHD cameras, allowing for clear HD video surveillance up to the maximum wiring distance. Cable types: 5C-2V・5C-FB, maximum wiring distance: up to 450m Cable type: 3C-2V, maximum wiring distance: up to 250m *The above values are actual measured wiring distances and are not guaranteed. Please note that the wiring distance may be shorter depending on the conditions of the cables and connectors used. *When using a DC12V power supply, please use within the separately specified recommended wiring distance. ■Equipped with a 4.2x Auto Iris Motorized Lens Features a 4.2x auto iris motorized lens. (Wide angle f=2.8mm to standard 12mm)

• Surveillance Cameras

■Equipped with a 2 Megapixel CMOS Sensor Adopts a 2 Megapixel 1/2.8 inch progressive scan CMOS sensor, achieving high-definition image display with a resolution of 1920×1080. Additionally, the brightness and image quality of night vision footage have significantly improved compared to previous models. ■Long-distance transmission via coaxial cable When using a combined power supply, it reduces the degradation of image quality during long-distance wiring of AHD cameras, allowing for clear Full HD video monitoring up to the maximum wiring distance. Cable types: 5C-2V・5C-FB, maximum wiring distance: up to 450m Cable type: 3C-2V, maximum wiring distance: up to 250m *The above values are actual measured wiring distances and are not guaranteed. Please note that the wiring distance may be shorter depending on the conditions of the cables and connectors used. *When using a DC12V power supply, please use within the separately specified recommended wiring distance. ■Equipped with a 4.2x Auto Iris Motorized Lens Features a 4.2x auto iris motorized lens. (Wide angle f=2.8mm to standard 12mm) Fine angle adjustments can be made according to the monitoring location.

• Surveillance Cameras

■Equipped with a 2 Megapixel CMOS Sensor Adopts a 2 Megapixel 1/2.8 inch progressive scan CMOS sensor, achieving high-definition image display with a resolution of 1920×1080. Additionally, the brightness and image quality of night vision footage have been significantly improved compared to previous models. ■Long-distance transmission using coaxial cable When using a combined power supply, it reduces the degradation of image quality during long-distance wiring of AHD cameras, allowing for clear HD video surveillance up to the maximum wiring distance. ■Cable types: 5C-2V・5C-FB, maximum wiring distance: up to 450m Cable type: 3C-2V, maximum wiring distance: up to 250m *The above values are actual measured wiring distances and are not guaranteed. Please note that the wiring distance may be shorter depending on the conditions of the cables and connectors used. *When using a DC12V power supply, please use within the separately specified recommended wiring distance. ■Equipped with a 4.2x auto iris motorized lens Features a 4.2x auto iris motorized lens. (Wide angle f=2.8mm to standard 12mm)

• Surveillance Cameras

Equipped with a 2-megapixel CMOS sensor Utilizing a 2-megapixel 1/2.8-inch progressive scan CMOS sensor, it achieves high-definition image display with a resolution of 1920×1080. Additionally, the brightness and image quality of night vision footage have been significantly improved compared to previous models. Realizing long-distance transmission with coaxial cable When using a combined power supply, it reduces the degradation of image quality during long-distance wiring of AHD cameras, allowing for clear HD video monitoring up to the maximum wiring distance. Cable types: 5C-2V, 5C-FB, maximum wiring distance: up to 450m Cable type: 3C-2V, maximum wiring distance: up to 250m *The above values are actual measured wiring distances and are not guaranteed. Please note that the wiring distance may be shorter depending on the conditions of the cables and connectors used. *When using a DC12V power supply, please use within the separately specified recommended wiring distance. Equipped with a 4.2x auto iris motorized lens It features a 4.2x auto iris motorized lens. (Wide angle f=2.8mm to standard 12mm)

• Surveillance Cameras

■Ideal Alarm for Attention Alerts This is an alarm device with LED flash and buzzer. It is perfect for alerting during shutter operations or for warning of approaching vehicles. ■Excellent Visibility With the adoption of high-power LEDs and a 180° viewing angle, it offers outstanding visibility. ■Loud Buzzer Despite its small size, it has a built-in buzzer that produces a loud sound of approximately 88dB or more (with a sound reduction feature). ■Multi-Color Emission With a single unit, it can emit four colors based on signal input (steady: red, green / flashing: red, yellow, white), allowing for versatile use depending on the application. (Priority given to rear input) ■Rainproof Structure It has a rainproof structure equivalent to IPX4, making it suitable for outdoor use as is. ■Compatible with Single Switch Boxes It is compatible with surface mounting as well as single switch boxes, allowing for flexible installation options.

• Other security and surveillance systems

■Significantly improved reliability through registration Only the signals from registered transmitters and repeaters are relayed, preventing interference from unnecessary relaying. *An unregistered mode that relays all signals without registration is also available. ■Unlimited relay count The registration system has removed the limit on the number of relays. By using registered repeaters, it is now possible to implement wireless systems even in large buildings where signals previously could not reach. ■Frequency switching function With support for 4 frequency switching, it can reduce signal interference when multiple transmitters or repeaters are installed. (Frequencies: F1, F2, F3, F4) *(1) Transmitters, receivers, and repeaters other than the 4 frequency switching type use frequency F1. (2) The frequency of the RTX-300 differs from F1. ■Registration method You can register by sending a signal from the transmitter or by entering the serial number of the transmitter (repeater). *Registration of repeaters in the RTX-100/200 series is limited to serial number registration.

• Other security and surveillance systems

■Features ●This product is installed near the pocket of automatic doors to provide safety measures against pinching and collisions with the FIX (side wall) during the operation of the automatic doors. ●The height is fixed at 900mm, and the width sizes are available in four models: DGS-700 (W:700) DGS-800 (W:800) DGS-900 (W:900) DGS-1000 (W:1000) ●The frame material is stainless steel (SUS304 1.5t) with a hairline finish. ●The product is delivered as a fully assembled unit, eliminating the need for assembly on-site. It simplifies construction as it only requires fixing with anchor bolts or similar.

• Safety Sensors

■Features ●This product is installed near the pocket of automatic doors to provide safety measures against pinching and collisions with the FIX (side wall) during the operation of the automatic door. ●The height is fixed at 900mm, and the width options are available in four models: DGS-700 (W:700) DGS-800 (W:800) DGS-900 (W:900) DGS-1000 (W:1000) ●The frame material is stainless steel (SUS304 1.5t) with a hairline finish. ●The product is delivered as a fully assembled unit, eliminating the need for on-site assembly. It simplifies construction as it only requires securing with anchor bolts or similar.

• Safety Sensors

■Features ●This product is installed near the pocket of automatic doors to implement safety measures against pinching and collisions with the FIX (side wall) during the operation of the automatic doors. ●The height is fixed at 900mm, and the width options include four models: DGS-700 (W:700) DGS-800 (W:800) DGS-900 (W:900) DGS-1000 (W:1000) ●The frame material is stainless steel (SUS304 1.5t) with a hairline finish. ●The product is delivered as a fully assembled unit, eliminating the need for assembly on-site. It can be easily secured with anchor bolts, simplifying the installation process.

• Safety Sensors

■Features ●This product is installed near the pocket of automatic doors to provide safety measures against pinching and collisions with the FIX (side wall) during the operation of the automatic door. ●The height is fixed at 900mm, and the width options include four models: DGS-700 (W: 700) DGS-800 (W: 800) DGS-900 (W: 900) DGS-1000 (W: 1000) ●The frame material is stainless steel (SUS304 1.5t) with a hairline finish. ●The product is delivered as a fully assembled unit, eliminating the need for on-site assembly. It can be easily fixed in place with anchor bolts, simplifying the installation process.

• Safety Sensors

■Features ● The central white indicator light briefly turns blue during verification, then switches to a green unlock indication. ● With an IPX5 protection rating, it can be installed in locations exposed to direct rain. ● It is a compact card reader measuring 70mm wide, 120mm tall, and 22mm thick. ● It has chemical resistance to sodium hypochlorite solution for cleaning. ● It can be used as either an ACsmart or ACsmart2 card reader.

• Entrance and exit control system

For more details, please refer to the basic information.

• Entrance and exit control system

■Features ● This is an 8-port PoE+ HUB compatible with each network camera (S series/T series). (Maximum 30W per port, total of 115W for all 8 ports) ● The PoE power supply ports (8 ports) support 10/100BASE. * Only one camera can be connected to each port. NVRs and HUBs cannot be connected. * Compliant with POE+ (IEEE802.3AT) / POE (IEEE802.3AF) ● The LAN connection ports (2 ports) support 1000BASE and can connect up to 4 devices in series. Please use these ports when connecting to NVRs or HUBs. * Plug & Play is not supported. * EX mode and ST VLAN mode cannot be used. Please use ST mode.

• Surveillance Camera System