TSエンジニアリング List of Products and Services

It is legally required to install emergency generators as fire protection equipment in specific fire protection targets, such as large commercial facilities and hospitals, where a large number of people come and go. Users are obligated to conduct inspections and maintenance to ensure that these generators can operate normally in case of an emergency. Our company handles all legal inspections, maintenance, renovation work, and submissions to various government agencies.

• others

We are installing and updating Lossnay ventilation systems in places with poor ventilation and overcrowding, such as the backyards of commercial facilities, back offices, hospitals, and company meeting rooms and offices.

• Municipal services and business location

Repair and renovation work of refrigeration and freezing equipment installed in food factories and cold storage warehouses. We are also carrying out new refrigerator installation work.

• Municipal services and business location

We are addressing issues such as the room temperature not dropping, lack of airflow, water leakage, musty odors (strange smells), and unusual noises. These problems can arise not only from the deterioration or failure of parts but also due to dirt inside the air conditioner, which can cause symptoms like lack of airflow and insufficient cooling. Therefore, we perform cleaning work in conjunction with repair work.

• others

We carry out replacement work for air conditioners that have deteriorated over time and have reduced efficiency, as well as installation work for new air conditioners when expanding offices. We also perform relocation work for air conditioners and remote controls due to changes in room layouts. In addition, we conduct electrical work such as the installation of ventilation systems and LED lighting. After completing renovation and new installation work, we perform trial operation inspections to confirm that everything is functioning properly and that the units are operating at their intended capacity.

• others

With the revision of labor safety and health regulations, management employers are required to make efforts to prevent passive smoking, and measures such as a complete smoking ban inside buildings and indoor smoking separation are being demanded. Therefore, it is necessary to continuously and regularly confirm the effectiveness of smoking separation. Our company has a wealth of cleaning experience with over 400,000 units in total, and we conduct real-time measurements that allow for verification of results on-site. We handle all maintenance related to the workplace environment. Please feel free to contact us when needed. 【Measurement Method】 ■ Items: Dust concentration, airflow from non-smoking areas to smoking rooms, carbon monoxide concentration ■ Smoking measures: Measurements taken twice a day (morning and afternoon) before and after construction ■ Ongoing maintenance: Measurements taken twice a day (morning and afternoon) every three months *For more details, please refer to the PDF document or feel free to contact us.

• Other contract services
• Other services
• Contract measurement

Preventive measures against Sick House Syndrome require VOC (volatile organic compounds) measurement. The increase in VOC concentration from items and furniture brought in after tenants move in may cause residents to develop Sick House Syndrome. By conducting VOC concentration measurements before handover and retaining the data, it can be proven that the influence is not from the building, ensuring safety. Our company can perform not only "Sick House Measurements" but also indoor air quality measurements and odor assessments. Please consult us if you have any concerns regarding air quality. 【Active Method Features】 ■ Using a pump, a constant flow of air is forcibly passed through a dedicated collection tube for a set period to collect the target substances. ■ Sampling time: 30 minutes per location. ■ Two measurements are required per location. ■ Measurement time is shorter compared to the passive method. *For more details, please refer to the PDF document or feel free to contact us.

• Other contract services
• Other services
• Contract measurement

The filtration system consists of various equipment, including the filter body, filtration pump, hair catcher, heating device, filtration process valve, and chemical dosing device. There are five types of common filtration media, including anthracite, manganese zeolite, and filtration sand, and our company can accommodate all of them. TS Engineering not only handles the replacement of filtration media but also offers regular maintenance services. Please feel free to consult us regarding any filtration equipment needs. 【Features】 ■ Filtration media purchased directly from major manufacturers at low cost and high quality ■ Work performed by experienced service personnel ■ Disposed filtration media contracted directly with waste disposal companies *For more details, please refer to the PDF document or feel free to contact us.

• Other contract services
• Other services

In facilities subject to the Building Environmental Sanitation Management Standards (Building Sanitation Act), regular inspections of drainage pipes, ventilation pipes, and insect screens are mandatory. Our company responds quickly to urgent requests, such as overflowing drains, with just a phone call, providing peace of mind. From a single clogged toilet to the maintenance of an entire building, various production areas in factories, and new construction sites, our experienced service personnel offer a consistent service from planning to execution. Please consult us for any type of facility. 【Features】 ■ Emergency response capability within 2 hours of the call ■ Adaptable construction methods for any facility based on its use ■ Capable of comprehensive construction for facilities with complex drainage routes *For more details, please refer to the PDF materials or feel free to contact us.

• Other contract services
• Other services

The use of plate heat exchangers is increasing in equipment and refrigeration units due to advantages such as high efficiency and compactness. Cleaning work is effective for improving heat exchange failures. Additionally, regular cleaning is necessary to prevent equipment troubles before they occur. Chemical cleaning can be performed at about half the cost compared to disassembly and maintenance. Our company offers chemical cleaning that can be done at low cost and with a short lead time, as well as plate disassembly cleaning. [Features] ■ Compatible with plate heat exchangers from various manufacturers ■ Selection of suitable cleaning agents and unique cleaning methods to enhance cleaning effectiveness ■ Confirmation of cleaning effectiveness (flow measurement, temperature measurement, endoscopic inspection) ■ Recovery and proper disposal of cleaning wastewater (manifest issuance) *For more details, please refer to the PDF document or feel free to contact us.

• Other contract services
• Other services

Much of the dirt on water-cooled oil coolers is due to scale components adhering to the circulating water. When scale adheres, it hinders the heat exchange of the oil cooler, causing an increase in oil temperature, which can lead to abnormal shutdowns of hydraulic equipment. To prevent such troubles, we recommend regular cleaning. Have you ever experienced "emergency shutdown due to abnormal oil temperature! Oil cooler body replacement takes several weeks"? In many cases, cleaning to remove dirt can restore performance without the need to replace the body. We are here to help when you are in trouble. 【Oil Cooler Cleaning Method】 ■ Oil Cooler 　　　↓ ■ Cooling Water Piping 　　　↓ ■ Cleaning Hose Installation * For more details, please refer to the PDF document or feel free to contact us.

• Other contract services
• Other services

Just as blood tests assess the health status of the human body, conducting "water quality tests" allows us to identify the risk of water-related issues in advance and implement preventive measures. Cooling water is prone to four major issues: "scale formation," "algae growth," "corrosion," and "Legionella bacteria." Open cooling towers, in particular, are susceptible to external environmental influences, necessitating measures that correspond to the operational conditions, installation circumstances, and water quality. Additionally, equipment water such as chilled and warm water or make-up water (groundwater) each has its own characteristics, requiring tailored measures based on their specific uses and symptoms. 【Characteristics of Equipment Water】 ■ Cooling Water: Cleaning + Water Quality Management ■ Chilled and Warm Water: Cleaning + Rust Inhibitor Addition ■ Make-up Water (Groundwater): Water Quality Management + Water Quality Improvement (Water Softener) *For more details, please refer to the PDF document or feel free to contact us.

• Other contract services
• Water quality testing
• Contract Inspection

"Foreign substances" are defined as things that are different from the norm, such as strange items that cause discomfort. Through foreign substance analysis, it is possible to gain significant clues for clarifying the causes of troubles and solving problems. Our company conducts water quality testing for drinking water, hot and cold water, and cooling water in-house. By performing water quality tests on-site alongside foreign substance analysis, we can verify whether the foreign substances or troubles are derived from the water quality. Additionally, we conduct over 500 foreign substance tests annually, allowing us to create a database of past cases, which enables us to make quick and accurate judgments based on that data. [Features] - In-house water quality testing for drinking water, hot and cold water, and cooling water - In addition to analysis, we also perform cleaning of hot and cold water systems in-house, and in cases of foreign substances caused by corrosion, we can propose cleaning or anti-corrosion agents - Extensive track record: conducting over 500 foreign substance tests annually *For more details, please refer to the PDF document or feel free to contact us.

• Other contract services
• Other services
• Contract Inspection

"Cooling and Heating Water System Cleaning" is a cleaning method that is gentle on piping, utilizing the dispersion effect of rust inhibitors. Users with older buildings can reduce cleaning risks. By using a rust inhibitor with a high dispersion effect instead of a cleaning agent, it does not damage the piping material. Corrosion in cooling and heating water systems can progress unnoticed, leading to significant issues such as leaks. By using rust inhibitors for cleaning cooling and heating water pipes, you can suppress corrosion inside the pipes and ensure long-lasting use of your equipment. 【Features】 ■ Uses rust inhibitors instead of cleaning agents: dispersion effect ■ Significantly reduces cleaning water volume: 70% cut ■ Short construction period: cost reduction *For more details, please refer to the PDF document or feel free to contact us.

• Other contract services
• Other services

"Chemical cleaning of air conditioning drain pipes" refers to a cleaning method that uses chemicals and high-pressure water to clean the inside of air conditioning drain pipes, effectively removing slime and dirt while reducing the risk of water leaks through vacuum suction. Recently, there has been an increasing demand for chemical cleaning of air conditioning drain pipes as a preventive maintenance measure due to concerns about secondary damage caused by water leaks from air conditioners. By proactively proposing unseen risks to customers, we provide a higher level of service. [Features] - Complete removal of slime and dirt through chemical cleaning - Enhanced cleaning effect with high-pressure jet and vacuum suction - No water leaks due to vacuum suction - Inspection of the interior of the pipes before and after cleaning using an endoscope *For more details, please refer to the PDF document or feel free to contact us.

• Other contract services
• Other services

Our company conducts "flow measurement of gases and liquids." We own eight ultrasonic flow meters (distributed across various service centers), allowing us to respond to urgent sites and large projects requiring multiple units. We can also propose investigations into the causes of water leaks alongside pipe removal, ultrasonic thickness measurement, endoscopic inspections, and X-ray examinations. Please leave the measurement and data processing to our specialized engineers. 【Features】 <Gas and gas flow measurement> ■ Information on pipe size, material, measuring fluid, and temperature is required ■ Dedicated damping materials are used as countermeasures against acoustic noise <Liquid flow measurement> ■ Flow velocity and flow rate can be measured from outside with only the insulation removed ■ Up to eight calibrated flow meters can be measured simultaneously *For more details, please refer to the PDF document or feel free to contact us.

• Other contract services
• Other services
• Contract measurement

Brine is used as a heat transfer medium in low-temperature refrigeration units, chillers, and industrial heat exchangers. Have you ever been troubled by not knowing where to request disposal due to removal work or concentration checks during maintenance? Our company has over 300 past achievements and can handle everything from the extraction of large plants, building air conditioning, to small cooling equipment, as well as after maintenance after refilling. 【Features】 ■ Brine recovery: during removal work ■ Brine recovery, cleaning, and replacement: during maintenance ■ Filling new liquid into newly installed equipment: during new construction *For more details, please refer to the PDF materials or feel free to contact us.

• Other contract services
• Other services

We conduct on-site investigations and propose various measurement methods according to the situation. For example, in the case of odors, we implement "odor measurement + detection tube measurement + VOC," and for clean rooms, we conduct "cleanliness measurement + microbial testing + leak measurement." Additionally, water quality analysis and microbial testing are also possible. We make comprehensive judgments based on measurements other than air. [Overview] ■ Measurement of volatile organic compounds and air environment ■ Measurement of odor index, concentration, etc. ■ Measurement of corrosive gases and detection tube measurement ■ Cleanliness measurement and microbial testing ■ Work environment measurement *For more details, please refer to the PDF document or feel free to contact us.

• Other contract services
• Other services
• Contract measurement

"When you open a faucet that hasn't been used much, brown water comes out!" We can solve your concerns, such as "I've been using it for years but have never cleaned the pipes," with our 'water supply pipe cleaning' using ozone water. Ozone water is characterized by its high reactivity to organic matter (dirt). Moreover, after the reaction, it returns to oxygen, so there are no residues, making it safe. At TS Engineering, we have over 2,000 successful cases annually and also carry out improvements and repairs to tank facilities. You can also trust us with foreign substance analysis for water supply troubles. 【Construction Flow】 ■ Occurrence of foreign substances and red water ■ Electrolytic method to create high-concentration ozone water and supply it to the piping system ■ Disinfection and cleaning of organic matter and odor-causing substances ■ Water supplied into the system from the aeration generation device for physical cleaning of organic matter ■ Increased cleaning power through aeration (physical cleaning) *For more details, please refer to the PDF document or feel free to contact us.

• Other contract services
• Other services

Our company conducts "noise and vibration level measurements." We are able to measure the "working environment sounds in factories" aimed at preventing hearing impairments for workers, as well as "noise and vibration measurements of machinery and equipment" and "noise and vibration level measurements in factories." Additionally, we conduct investigations such as "cause investigation measurements" and "sound insulation measurements," where we measure the specific frequencies of equipment generating noise and investigate the surrounding impact based on those frequencies. 【Features】 <Measurement of working environment sounds in factories> ■Measurement locations: Areas around equipment that generates high noise levels ■Purpose: Preventing hearing impairments for workers ■Related laws: Labor Safety and Health Act (under the jurisdiction of the Ministry of Health, Labour and Welfare) *For more details, please refer to the PDF document or feel free to contact us.

• Other contract services
• Other services
• Contract measurement

In conventional deterioration surveys, the only method capable of estimating remaining life through wall thickness measurements and understanding corrosion conditions was the destructive inspection known as pipe removal inspection. However, pipe removal inspection has many limitations, such as water shutdowns, drainage regulations, and nighttime work restrictions. Our company proposes a highly accurate deterioration survey conducted non-destructively by combining various diagnostic methods similar to pipe removal. Please feel free to contact us when needed. 【Features】 ■ By identifying areas of reduced thickness through X-ray inspection, pinpoint wall thickness measurements are possible. ■ Wall thickness measurements are conducted after confirming the condition of the piping, making it easier to detect pitting corrosion. ■ High-precision survey data can be provided. ■ No restrictions on working hours (nighttime). ■ There are no water shutdowns or drainage regulations, allowing for uninterrupted equipment use and reducing the risk of leaks. *For more details, please refer to the PDF document or feel free to contact us.

• Other contract services
• Other services
• Contract Inspection

Circulating within the building, the plumbing for water supply and drainage can be likened to "blood vessels" in a human body. Both human blood vessels and building plumbing can develop various troubles due to aging (deterioration over time). To continue using the "plumbing," which is also the blood vessels of the building, it is important to conduct regular health checks to prevent troubles before they occur. Additionally, maintenance and inspection of the exterior drainage are also crucial. Our company offers solutions for clearing blockages in drainage pits and pipes, as well as repair work for cracks, using high-pressure cleaning. 【Investigation Methods and Points for Selecting Investigation Locations】 ■ Ultrasonic thickness measurement: Calculate remaining lifespan ■ Endoscopic inspection: Check the condition inside the pipes ■ X-ray investigation: Check the condition inside the pipes ■ Pipe removal inspection: Calculate remaining lifespan *For more details, please refer to the PDF document or feel free to contact us.

• Other contract services
• Other services
• Contract Inspection

Our company is capable of HEPA filter replacement, leak measurement, and various measurements in environments such as hospital operating rooms, food processing factories, and pharmaceutical clean rooms. We offer reasonably priced HEPA filters made in Japan, as well as chemical filters, and we perform not only measurements but also HEPA filter replacement work. Please feel free to contact us when needed. 【Features】 ■ HEPA Filter Replacement: Remove existing HEPA filter and install a new HEPA filter ■ HEPA Filter Leak Measurement: Confirm the performance of the HEPA filter ■ Airflow Measurement: Measure air velocity (air flow) from the device using a rectifier (hopper) ■ PAO Generator: Generate particulate matter in the primary air entering the clean room ■ Inter-room Differential Pressure Measurement: Measure the differential pressure between rooms within the clean room *For more details, please refer to the PDF document or feel free to contact us.

• Other contract services
• Other services
• Contract measurement

When updating the air conditioning system, removing old refrigerant oil through "refrigerant piping cleaning" allows for the reuse of existing piping. Additionally, it is effective in cases where the refrigerant oil has deteriorated, causing frequent damage to the compressor, or when moisture and foreign substances have mixed in due to issues. We use a non-Freon type cleaning agent developed in collaboration with a chemical manufacturer, and we perform circulating cleaning with a unique cleaning unit that can accommodate long piping and multiple branch pipes, such as those in multi-system buildings. 【Features】 ■ Cost reduction ■ Shortened construction period ■ Unique cleaning unit and cleaning agent for water treatment ■ Analyzing the oil concentration in the cleaning solution to confirm cleaning effectiveness *For more details, please refer to the PDF materials or feel free to contact us.

• Other contract services
• Other services

Around us, there are a variety of bacteria, such as common bacteria that inhabit everywhere, E. coli which is an intestinal bacterium, and Legionella species found in soil, all living in various places. The "Building Hygiene Law" mandates testing for general bacteria and E. coli in drinking water, while the "Public Bathhouse Law" requires testing for bathwater and the "Swimming Pool and School Health Law" requires testing for Legionella species and E. coli in pool water. Our company can handle everything from water quality testing and bacteria testing to identifying causes, pipe cleaning as a countermeasure, and even maintenance such as replacing filter media and filters. Additionally, we can perform bacterial species identification tests. Please feel free to consult with us. [Overview] ■ Falling bacteria testing (standard analysis) ■ Airborne bacteria testing (higher precision analysis) ■ Adhering bacteria testing (point-specific analysis) ■ Bacteria testing in water *For more details, please refer to the PDF document or feel free to contact us.

• Contract Inspection
• Other contract services
• Other services

"REMO III" is a remote monitoring kit that supports various sensors, making it easy to visualize the information you want to know. It is equipped with standalone mobile communication capabilities, so an internet connection is not required. Additionally, it is compatible with both 100V and 200V, allowing for installation in various locations. Please feel free to contact us if you have any inquiries. 【Features】 ■ Detects small changes in the environment ■ Notifies via email ■ Easy to retrofit to existing equipment ■ Missed alert prevention feature *For more details, please download the PDF or contact us.

• Other security and surveillance systems

We would like to introduce the implementation results of the remote monitoring kit "REMO III" in zoos and aquariums. For animals (fish) that are sensitive to changes in water temperature and air temperature, maintaining a constant temperature in their habitat is crucial for protecting their lives. For animals (fish) managed in the back yard, if the set temperature or humidity exceeds the specified limits, the keepers are notified via email. This contributes to the health management of animals (fish) that are sensitive to changes in water temperature and air temperature. Additionally, we have also made it possible to quickly notify via email in the event of an escape.

• Other security and surveillance systems

We would like to introduce the implementation results of "REMO III," which can detect abnormalities in temperature and humidity, in house cultivation and greenhouses. In an environment where changes in temperature and humidity have a significant impact on crops, we have set it up to notify farmers via email when humidity exceeds a certain percentage or temperature surpasses a certain threshold. This helps prevent issues such as forgetting to ventilate or high-temperature damage to crops due to excessive temperature or humidity! Additionally, by detecting the presence of people or animals at night and notifying via email, we have also contributed to preventing crop damage and theft by animals.

• Other security and surveillance systems

The remote monitoring kit "REMO III" is compatible with various sensors and can be installed on existing equipment to detect temperature anomalies. By implementing it in a server room that operates 24 hours a day, it has become possible to detect sudden temperature rises and the stoppage of cooling devices. This helps prevent system downtime due to server overheating and damage to equipment. *For more details about the product, please download the PDF or feel free to contact us.*

• Other security and surveillance systems

The remote monitoring kit "REMO III" that we handle detects abnormalities in temperature and humidity and notifies maintenance personnel via email. In places where room temperature and humidity are automatically managed, if the air conditioning stops, dairy products and fresh seafood can spoil, leading to the growth of bacteria and viruses that cause food poisoning. Equipping important facilities with a system that can detect abnormalities in temperature and humidity management is essential for quickly identifying troubles, minimizing the impact on other manufacturing processes, and preventing the spoilage or damage of products. Additionally, it is also possible to detect abnormalities if a machine that is supposed to be stopped malfunctions. *For more details about the product, please download the PDF or feel free to contact us.

• Other security and surveillance systems

The remote monitoring kit "REMO III" detects abnormalities in temperature and humidity and notifies the manager via email. As a result, the administrator can detect temperature and humidity anomalies remotely and respond quickly to unusual temperature changes. It can detect abnormalities on-site 24 hours a day, 365 days a year, contributing to the automation of businesses. Additionally, it is equipped with a standalone mobile communication function, so an internet connection is not required. 【Benefits of Implementation】 - Early detection of malfunctions - Reduction in the frequency of regular monitoring 【Implementation Achievements】 - House cultivation, greenhouses - Food factories - Cold storage in factories - Zoos, aquariums *Customization using various sensors such as temperature sensors, water leak sensors, brightness sensors, etc. is possible.

• others

In April 2015, a law regarding the rationalization of the use and proper management of fluorocarbons was enacted, and inspections have been mandated under the Fluorocarbon Emission Control Law. Depending on the type of equipment, regular inspections by a specialized contractor are required every year or every three years (for compressors with an output of 7.5 kW or more). Additionally, all commercial equipment must undergo a simple inspection at least once every three months. Only specialized contractors registered with the prefectural governor are allowed to perform filling and recovery operations for fluorocarbons (e.g., "Refrigerant Fluorocarbon Handling Technicians"). 【In such cases, please consult our company】 ■ I want to request an inspection somewhere. ■ I want to hear more details. ■ I don't know where to ask. *For more details, please refer to the PDF document or feel free to contact us.

• Other contract services
• air conditioning
• Refrigerators and freezers

Our company offers installation and mounting services for school-use Lossnay systems. As the lifestyle with COVID-19 progresses, the adoption of school-use Lossnay systems that can provide fresh air intake and exhaust has surged at various universities. By bringing the outdoor air closer to the indoor temperature and humidity for intake, it is possible to reduce the load on air conditioning systems. With a compact design, it excels in installation and maintenance. 【Features】 ■ Enables appropriate ventilation ■ Energy-saving ■ Easy installation ■ Total support from proposal to aftercare *For more details, please refer to the PDF materials or feel free to contact us.

• Other air conditioning equipment
• air conditioning

In case of an emergency. Will the emergency power generation equipment operate? Our company undertakes inspections and maintenance of power generation equipment with specialized knowledge and skills from qualified personnel, ensuring safety and reliability for our customers. If you want to request an inspection somewhere, have questions, or don’t know where to ask, please consult with us first. 【Overview】 ■ Legal inspections of power generation equipment ■ Regular inspections ■ Simulated load testing ■ Installation work, etc. *For more details, please refer to the PDF document or feel free to contact us.

• Other contract services
• Generators and transmission motors
• Calibration and repair

At TS Engineering Co., Ltd., we offer "Air Conditioner Cleaning Services" for hotels and ryokan facilities. In recent years, more and more people are choosing accommodation through websites, where reviews are extremely important. Have you seen comments like, "The room smells musty. It seems to be coming from the air conditioner," or "The air conditioning in the guest room was not good"? This could lead to losing valuable customers. Please leave it to us. 【Points of the Cleaning Service】 ■ Creating a comfortable guest room environment ■ Reducing electricity costs ■ Cleaning between checkout and check-in *For more details, please refer to the related links or feel free to contact us.

• Other contract services
• air conditioning
• Other air conditioning equipment