サンエス工業 List of Products and Services

1. The high-speed waterproof grille can handle a recommended wind speed of 4.5 m/s to a maximum of 5.0 m/s. It can process the same air volume with about half the size of conventional grilles. 2. Reduced resistance coefficient → Improved energy efficiency. It is an energy-saving product that contributes to CO2 reduction and is environmentally friendly. 3. Significantly reduced noise generation (at a processing wind speed of 4.5 m/s = 61 dB). *Since the grille dimensions (W×H) are smaller: 1) It enhances the seismic resistance of the building. 2) The ducts and chambers connected to the grille become smaller. 3) Consequently, the maintenance space in the machinery room can be smaller. 4) The wall openings of the machinery room become smaller, improving the sound insulation performance of the machinery room. 5) The smaller grille openings make it ideal for the renewal of existing buildings. 6) It is advantageous for facilities handling large air volumes, such as factories, supermarkets, cogeneration facilities, power plants, waste treatment plants, sludge treatment plants, and water treatment facilities.

• Control Panel Cooler

We are specialists in manufacturing various products such as cans, water tanks, panel processing, frames, dampers, and various sheet metal processing, using the latest equipment and skilled craftsmen with high technology, prioritizing "safety first."

• Other pumps

1. Manual operation for air release is unnecessary. The routing of air release piping is no longer needed, reducing piping costs. 2. It suppresses corrosion inside the piping, extending the lifespan of the piping. 3. It can operate from 32A to 750A.

• Other pumps

By adopting in-factory processing from on-site operations, we promote "proactive safety," "improvement and stabilization of quality," and "cost reduction," aiming for the advancement of total piping construction.

• Other pumps

The Eliminator developed by our company has a resistance coefficient that is approximately 1/6 compared to the conventional 6-fold low-speed eliminator, even at high wind speeds.

• Other pumps

It can be used for various purposes such as aligning the position and dimensions of ducts, blocking vibrations, and soundproofing effects.

• Other pumps

1. Free Design "Spiral Duct" has no restrictions on the length of the hoop used. The length of the duct can be manufactured to any length within the limits of transportation conditions, making it convenient for handling and installation, and saving on on-site joining costs. *As a rule, the standard length is 4m. 2. Lightweight and Strong "Spiral Duct" is continuously manufactured by spirally winding hoops of widths 100mm and 150mm, and thicknesses of 0.5 to 1.6mm, overlapping and fixing both ends with a fold. 3. Quality and Environment "Spiral Duct" guarantees uniform and reliable quality while being a reusable, environmentally friendly product. San-Ei considers the impact of its business activities, products, and services on the global environment, strives for environmental conservation, and engages in continuous improvement. 4. Compliance with Ministry of Land, Infrastructure, Transport and Tourism Specifications The product material primarily uses galvanized steel sheets, with standard products made from galvanized steel sheets according to JIS G 3302, and specifications conforming to the Ministry of Land, Infrastructure, Transport and Tourism standards. Additionally, spiral ducts made from materials such as stainless steel (SUS304 2B) and PVC-lined steel sheets are also available.

• Piping Materials

By dividing the painting zone and the worker zone, the working environment improves. The cleanliness is high, and the amount of waste and defects decreases. This allows for long-term painting with difficult-to-apply and refillable filters. It is ideal for small-scale painting of small parts.

• Other pumps

The width of the booth is a multiple of 840mm, starting from 1,680mm (DB-2S type). 1. High removal efficiency As a dry booth, it has a very high removal efficiency, making it ideal as a mist and dust removal device. 2. Large dust collection capacity The double filter extends the filter's lifespan, reducing the frequency of replacements, making it very economical. 3. Filter media can be changed according to the type of paint Even if the type and amount of paint change, only the filter media needs to be replaced, avoiding unnecessary costs while achieving high performance. It can also be used with water-based paints. 4. No wastewater issues Unlike wet booths, it does not use any water, so there is no concern about secondary pollution from wastewater. 5. Ideal airflow can be achieved Air is drawn in across the entire surface of the filter at the back of the booth, ensuring uniform airflow and maintaining a hygienic and safe working environment. 6. Low equipment costs Compared to wet booths, it is inexpensive due to its simple structure. 7. Quick delivery All parts are standardized, allowing for fast delivery.

• Other pumps

Paint Killer has an excellent feature that transforms overspray paint in the water into a non-sticky precipitate (or suspended matter) simply by adding it to circulating water. 【Features】 Overspray mist is transformed into a non-sticky state, allowing it to float or settle. To prevent water from decaying, continuous operation of the booth without drainage is possible. The paint is less likely to adhere to the booth body, eliminating the need for daily cleaning and reducing the frequency of regular maintenance. Proper pH management can prevent corrosion of the iron parts in the water tank. 【Usage】 The standard addition amount of Paint Killer is 0.3% of the water volume (3 kilograms for 1000 liters of water). If you are using a pump-less booth of type PLB, it is sufficient to operate the booth and gradually add a small amount near the serrated plate where the water is well agitated.

• Other pumps

To enable work within the booth, it is possible to install a slatted floor. The aquarium can also be installed underground, and it can be made of concrete.

• Other pumps

This type generally has an air supply device. It is a booth that provides a comfortable working environment through air flow.

• Other pumps

This is a booth that provides a comfortable working environment through air flow. 1. It can be installed on all types of pump-less booths, regardless of whether they are new or existing. 2. It can be designed according to the space and purpose of the painting work area. 3. The ceiling gantry crane can be used effectively. 4. It prevents the dispersion of overspray mist and dust. 5. The tent is made of non-combustible fabric.

• Other pumps

1. High dust removal efficiency For hydrophilic dust particles larger than 5μ, the removal efficiency is over 99.5% (by weight), making it very efficient. (Based on our experimental data) Additionally, the removal efficiency for talc (four types of powder for JIS testing) is over 97%. 2. Suitable for large air processing The device is compact, allowing for large air processing in a small space. 3. Low maintenance costs There are no pumps, valves, water filters, or nozzles, so maintenance such as repairs is unnecessary.

• Other pumps

This is a clean booth suitable for high-end coatings that particularly dislike dust, equipped with both supply and exhaust air. 1. It comes with a compact air supply unit that provides clean air. 2. The balance of supply and exhaust air eliminates the intrusion of dust. 3. There is no rebound of overspray mist or color contamination. 4. It provides a clean working environment for painters. 5. The installation of a "floating tank" makes maintenance even easier. 6. It is not affected by airflow from outside the painting room.

• Other pumps

It is a pump-less booth that has been lowered in height without changing its features or performance, and there are no costs for ceiling modifications during installation. It can be easily installed in existing buildings with low ceiling heights. It is suitable for small-scale painting workspaces. It can be installed in places with height restrictions, such as the second floor, without worrying about the height. It is suitable for painting work in buildings that are not designed for painting operations, such as testing rooms, laboratories, and prototype rooms.

• Other pumps

Paint mist and dust are captured by the water film on the wall through centrifugal force, and the water droplets are separated by the eliminator to become clean air, which is then discharged. On the other hand, the water contained in the paint and dust returns from the lower part of the cleaning chamber through the return water channel and is recirculated towards the front of the water tank, where it settles at the bottom. When using a pump-less booth for painting work, adding paint treatment agents and paint killers will transform the paint mist into a non-sticky sludge. 【Features】 This is a standard type suitable for painting work. It is a type where the operator works in front of the booth. The width (w) of the booth is produced in multiples of 840mm, starting from 840mm (Type 1S). *For more details, please refer to the PDF document or feel free to contact us.

• Other painting machines