アジアファインテック List of Products and Services

The odors from toilets, cigarettes, the stench from raw materials, and even the smoke from grilled meat that clings to clothing all contribute to an unpleasant living environment. This product fundamentally breaks down the bacteria and viruses that cause these odors and purifies the air containing odor components. It is an air purifier with excellent deodorizing power. This product utilizes source technologies developed by experts, including doctors from the United States and South Korea, for the decomposition of harmful gases, reduction of unpleasant odors, reduction of ozone, air sterilization, and air purification. It can help reduce the emissions of greenhouse gases, which are a cause of the environmental issues increasingly being raised in recent years, contributing to the realization of a carbon-neutral society.

• Other physicochemical equipment
• Other air conditioning equipment

The touch screen of the table order system can become a breeding ground for viruses and bacteria when touched by a large number of unspecified customers if left unattended. If a customer who has touched it then touches their face or mouth, there is a possibility of health risks occurring. This product maintains the cleanliness of the screen surface by continuously blowing specially treated air from the bottom of the table order system's screen, effectively sterilizing it. The air that is emitted is also deodorized, providing simultaneous deodorizing effects. By installing multiple units within the store, the effectiveness of deodorizing the store increases significantly. This product utilizes source technologies developed by experts, including doctors from the United States and South Korea, for harmful gas decomposition, odor reduction, ozone reduction, air sterilization, and air purification. It can help reduce the emissions of greenhouse gases, which are a cause of the environmental issues that have been increasingly highlighted in recent years, contributing to the realization of a carbon-neutral society.

• Other air conditioning equipment

The KIOSK's touchscreen can become a breeding ground for viruses and bacteria when touched by a large number of unspecified customers if left unattended. If a customer touches their face or mouth after touching it, there is a possibility of health issues arising. This product maintains the screen surface in a sterilized and clean state by continuously blowing specially treated air from the top of the KIOSK screen. The air that is emitted is also deodorized, providing a simultaneous deodorizing effect. This product utilizes source technologies developed by experts such as physicians from the United States and South Korea, including harmful gas decomposition, odor reduction, ozone reduction, air sterilization, and air purification. It helps to reduce the emission of greenhouse gases, which are a cause of the environmental issues that have been increasingly highlighted in recent years, contributing to the realization of a carbon-neutral society.

• Other air conditioning equipment

The grease stains that accumulate on the ventilation hood require significant effort to clean. This "automatic self-cleaning fume-free ventilation hood" prevents fumes containing oil generated during cooking from adhering to the hood and automatically cleans the interior of the hood, providing a maintenance-free and hygienic cooking environment. Additionally, it utilizes the heat energy accumulated inside the ventilation hood without releasing it outside, allowing for boiling water or warming food in the kitchen. This product employs source technologies developed by experts, including doctors from the United States and South Korea, for harmful gas decomposition, odor reduction, ozone reduction, air sterilization, and air purification, helping to reduce the emissions of greenhouse gases that contribute to environmental issues and contributing to the realization of a carbon-neutral society.

• Ventilation and Exhaust

Our company can sell, install, and provide after-sales service for your products in South Korea. As your local agent, we will respond to various requests, including mediation for import and export. We have many sales engineers and field engineers who are fluent in Japanese and experienced, so communication in Japanese is possible. Originally, our main clients in South Korea are in the display market, including Samsung Display and LG Display, but we can handle various electronic devices without being limited to specific industries. Additionally, we can conduct market research and procurement of commercial and processed products in South Korea, as well as manufacture equipment and ancillary facilities at prices that fit your budget. Please consider us as a business partner to help expand your business in South Korea more smoothly. We will flexibly consider the scope of our services according to your requests.

• Other contract services
• Other services
• Machinery and equipment installation/dismantling/relocation

Carbon dioxide has a low volumetric density in the atmosphere, dissolves well in water, and can reduce specific resistance without deteriorating the quality of DIW. It is effective in preventing "foreign substance adhesion" caused by static electricity.

• Ion implantation equipment

- Removes and prevents microbubbles. - Removes dissolved gases (N2, O2) from the liquid. - Applicable to organic solvents (photoresist) and pure water. - Can remove bubbles (microbubbles) from water and glass surfaces. - Prevents oxidation caused by dissolved oxygen. - Gas removal rate of over 80%.

• Deaeration device
• Filtration Equipment
• filter

UV wavelengths are broadly divided into the wavelength bands of UVA, UVB, and UVC, and are utilized in various fields such as curing, sterilization, deodorization, air purification, bio, and medical applications, depending on the wavelength. Based on our extensive experience and know-how in the semiconductor, display, electronic components, PCB, and printing fields, we provide customized solutions tailored to our customers' specifications.

• LED Module

The innovative internal structure design prevents clogging of the nozzle injection port even if foreign substances are mixed in, allowing for a stable process to be maintained. The product size can also be customized to meet customer requirements, so please feel free to contact us. Quartz glass nozzles are used, and while PVDF material is employed for specific chemicals, it can cause bending in the nozzle due to strength and weight issues. As an improvement, we manufacture the nozzles in quartz to resolve this problem.

• nozzle

Our company provides a wide range of high-quality technical services and solutions, from improvement proposals that maximize the performance of equipment to maintenance, servicing, and modifications in detail. We also sell and repair spare parts, as well as handle equipment delivery, installation, adjustment, and inspection. Please feel free to contact us if you have any requests. 【Main Services】 ■ Equipment repair, modification, overhaul, and laser polishing of granite plates ■ Sale and repair of spare parts ■ Equipment delivery, installation, adjustment, and inspection work ■ Sale of equipment, electronic devices, and materials *For more details, please feel free to contact us.

• Machinery and equipment installation/dismantling/relocation
• Other contract services
• Other services

Our company can handle the sales, installation, and after-sales service of your products in South Korea. As your local agent, we will respond to various requests, including mediation for import and export. We have many sales engineers and field engineers who are fluent in Japanese and experienced, so communication in Japanese is possible. Originally, our main clients in South Korea are in the display market, including Samsung Display and LG Display, but we are capable of handling various electronic devices without being limited to specific industries. Additionally, we can conduct market research and procurement of commercial and processed products in South Korea, or manufacture equipment and ancillary facilities at prices that fit your budget. Please consider us as a business partner to help expand your business in South Korea more smoothly. We will flexibly consider the scope of our services according to your needs.

• Other contract services
• Other services
• Machinery and equipment installation/dismantling/relocation

The EFEM system can be flexibly customized and implemented at a low cost according to customer requirements. 【Features】 1. Custom-made key components (Transfer Robot, EFEM, Load Port, Controller) 2. Control of key components via EFEM PC (SECS/GEM compatible) 3. Flexibly customizable according to customer requirements 4. Full line-up support through proprietary development and manufacturing 5. Custom dual-hand robots are also available 6. Robot hand structure for warpage panels (greater than 7mm) for PLP 7. Aligners suitable for various panel sizes can also be adopted 8. Fine teaching capability through sensors and motors 9. Extensive experience and track record in mass production EFEMs

• Other semiconductor manufacturing equipment

- Removes and prevents microbubbles. - Removes dissolved gases (N2, O2) from the liquid. - Applicable to organic solvents (photoresist) and pure water. - Can remove bubbles (microbubbles) from water and glass surfaces. - Prevents oxidation caused by dissolved oxygen. - Gas removal rate of over 80%.

• Deaeration device
• Filtration Equipment
• filter

Carbon dioxide has a low volumetric density in the atmosphere, dissolves well in water, and can lower the specific resistance without deteriorating the quality of DIW. It is effective in preventing "foreign substance adhesion" caused by static electricity.

• Ion implantation equipment

1. Custom manufacturing of key components (Transfer Robot, EFEM, Load Port, Controller) 2. Control of key components via EFEM PC (SECS/GEM compatible) 3. Flexible customization according to customer requirements 4. Full line-up support through proprietary development and manufacturing 5. Custom dual hand robots are also available 6. Robot hand structure for warpage panels (greater than 7mm) for PLP 7. Adoption of aligners suitable for various panel sizes is also possible 8. Fine teaching capability through sensors and motors 9. Extensive experience and track record in EFEM for mass production

• Other semiconductor manufacturing equipment
• Substrate transport device (loader/unloader)

【Product Functions and Characteristics】 1⃣ The color change in the colored part of the insulating tube allows for visual inspection of connection deterioration. 2⃣ By using temperature-reversible products, the current state of deterioration can be confirmed. 3⃣ By using temperature-non-reversible products, the history of past deterioration can be confirmed, preventing potential accidents. 4⃣ The transparent part of the insulating cap (EYECAPⓇ) allows for visual quality inspection of the crimping (installation) state of the terminal. 5⃣ Maintains insulation function without melting or deforming at temperatures above 250℃.

• Other safety equipment
• Distribution Board
• Terminal Blocks

Insulation between CELL to CELL, external insulation of MODULE, insulation materials for PACK Double-sided tape + MICA + double-sided tape MICA + double-sided tape + non-combustible material + double-sided tape + MICA

• Secondary Cells/Batteries
• Lithium-ion battery
• Composite Materials

For secondary batteries, can type: PI (PET) + black double printing + double-sided tape + release paper for external insulating materials of secondary batteries.

• Secondary Cells/Batteries
• Composite Materials

This is a sub-gasket for hydrogen fuel cells. It excels in heat resistance, release force, insulation resistance, and flame retardancy. Structure: Heat-resistant PET (pen) + urethane adhesive (thickness - 25, 30) * Processed products (mask): Heat-resistant PET (pen) + urethane adhesive + PET (mask) are also possible, thickness; 18, 23, 25 um.

• Composite Materials

This is an FPI FILM for electrode production processes for hydrogen fuel cells. It excels in heat resistance, release force, dielectric strength, insulation resistance, and flame retardancy. For hydrogen fuel cells, both sides and edge separation coating are also possible for the high-temperature process of MEA electrode production. Structure: PI + fluorine coating, thicknesses: 25, 38, 50, 75, 100, 125 um *Processed products (MASK): FPI + PET (MASK) are also available, thicknesses: 18, 23, 25 um.

• Composite Materials
• Hydrogen battery

Using a high-pressure pump and a nozzle specifically designed for high-pressure cleaning, high-impact fine particles are sprayed to effectively remove particles and organic contaminants from the surface of the cleaning target (substrate). - The unit size is more compact than previous compressed air pumps. - Solves the noise issues characteristic of compressed air pumps. - Pressure adjustment is easy (pressure can be adjusted easily by changing the Hz with an inverter). - Easy connection from factory utilities (DIW). - Customizable according to customer needs. - Interlock function (if the water jet flow/pressure exceeds the set value, an alarm is triggered in the cleaning device).

• High pressure cleaner

We have extensive experience with clean rooms and clean room equipment. Our products feature a slim design, use aluminum fans for low vibration and low noise, and are well-regarded for their energy-saving (low power consumption) design. Operation control and monitoring can be done either in groups or individually. We can manufacture in various sizes according to customer requests, so please feel free to contact us.

• Air purifiers

1) The world's best control algorithm 2) Variable sampling (50-250ms) control The manufacturer (Temcoline) is a specialized manufacturer of temperature controllers, and through the precision electronic technology and control technology accumulated in sensors, industrial robots, aircraft, RF technology, etc., has elevated the standard of temperature controllers in South Korea to a new level, already surpassing global companies in various fields such as semiconductor equipment, food machinery, and extrusion molding machines. Fast sampling time does not necessarily mean optimal control. This is because most temperatures change slowly; if the actual temperature is not changing but the sampling is fast, it may actually hinder optimal control. This device has successfully combined the PID control algorithm with variable sampling time for control. Temcoline products achieve optimal control under any conditions.

• Other electronic parts

The innovative internal structure design ensures that the nozzle injection port does not clog even if foreign substances are mixed in, allowing for a stable process to be maintained. The product size can also be customized to meet customer requirements, so please feel free to contact us. Quartz glass nozzles are used, and while PVDF material is employed for specific chemicals, it can cause bending in the nozzle due to strength and weight issues. As an improvement, we manufacture the nozzles in quartz to resolve this problem.

• nozzle

UV wavelengths are broadly divided into the wavelength bands of UVA, UVB, and UVC, and are utilized in various fields such as curing, sterilization, deodorization, air purification, biotechnology, and medical applications, depending on the wavelength. Based on our extensive experience and know-how in the semiconductor, display, electronic components, PCB, and printing industries, we provide customized solutions tailored to our customers' specifications.

• LED Module

It can be used for various applications such as industrial heaters, automotive heaters, home appliance heaters, and beauty/medical heaters. All specifications can be custom-made. The temperature range is wide, from low to high temperatures, and it is also suitable for testing purposes. It can be made from various materials such as PI film, silicone rubber, PTFE film, and mica.

• Other electronic parts

Our company can sell, install, and provide after-sales service for your products in South Korea. As your local agent, we will respond to various requests, including mediation for import and export. We have many experienced sales and engineers who are fluent in Japanese, so communication in Japanese is possible. Originally, our main clients in South Korea are in the display market, including Samsung Display and LG Display, but we can handle various electronic devices without being limited to specific industries. Additionally, we can conduct market research and procurement of commercial and processed products in South Korea, or manufacture equipment and ancillary facilities at prices that fit your budget. Please consider us as a business partner to help expand your business in South Korea more smoothly. We will flexibly consider the scope of work according to your requests.

• Other contract services
• Other services
• Machinery and equipment installation/dismantling/relocation

Our company provides a wide range of high-quality technical services and solutions, from improvement proposals that maximize the performance of equipment to maintenance, servicing, and modifications in detail. We also sell and repair spare parts, as well as handle equipment delivery, installation, adjustment, and inspection. Please feel free to contact us if you have any requests. 【Main Services】 ■ Equipment repair, modification, overhaul, and laser polishing of granite plates ■ Sale and repair of spare parts ■ Equipment delivery, installation, adjustment, and inspection work ■ Sale of equipment, electronic devices, and materials *For more details, please feel free to contact us.

• Machinery and equipment installation/dismantling/relocation
• Other contract services
• Other services