アドバンス電気工業 List of Products and Services

The "Electromagnetic Valve AVH Type High Corrosion Resistance Orifice 1.2 to 5mm" is an electromagnetic valve that uses corrosion-resistant plastic for the wetted parts. The diaphragm is made of corrosion-resistant plastic. Its main applications include the supply of chemical solutions and pure water. The orifices are available in sizes φ1.2, φ1.6, φ3.0, and φ5.0, and it supports various operating voltages of DC12V, DC24V, and AC100V. 【Specifications】 ■ Orifice: Available in sizes φ1.2, φ1.6, φ3.0, and φ5.0 ■ Operating Voltage: Supports DC12V, DC24V, and AC100V ■ Fluid Temperature: 10 to 50℃ ■ Connection Size: M6 (P=1), 1/8", 1/4" *For more details, please refer to the PDF document or feel free to contact us.

• Other machine elements

We would like to introduce the "Pinch Valve" that we handle. This is a DC24V driven pinch valve compatible with tubes of inner diameter 1mm and outer diameter 3mm. The valve presses from the outside of the tube, which is the only part that comes into contact with the fluid. The pin structure has been designed to enhance the durability of the tube. It is suitable for use in medical devices, biotechnology, and pharmaceutical processes. 【Specifications】 ■ Fluid pressure: 0–100 kPa (affected by the hardness of the tube) ■ Ambient temperature: 5–50°C (must be free from condensation) ■ Lifespan: 5 million cycles (affected by the hardness of the tube) *For more details, please refer to the related links or feel free to contact us.

• valve

The "Electromagnetic Valve SV2 Type Body Material PSU" is an integrated joint type electromagnetic valve with excellent chemical resistance. The wetted parts are made of corrosion-resistant plastic and rubber. Its main applications include pure water and dialysis solutions. Since rubber is used in the valve seal area, it has high sealing performance, making it suitable for medical devices and various analytical instruments. 【Specifications】 ■ Orifice: φ3.0, φ4.0 lineup ■ Fluid temperature: 10 to 50℃ ■ Compatible tube: Silicone tube for inner diameter φ5.0, etc. *For more details, please refer to the related links or feel free to contact us.

• Other machine elements

The "Electromagnetic Valve NAVR Type High Corrosion Resistance and High Sealing Orifice 1.2 to 5mm" is an electromagnetic valve that uses highly corrosion-resistant plastic in the fluid contact area. Its main applications include the supply of chemical solutions and pure water. The diaphragm is made of corrosion-resistant plastic combined with corrosion-resistant rubber. Due to the use of rubber in the valve sealing area, it has high sealing performance, making it suitable for medical devices and various analytical instruments. 【Specifications】 - Orifice: Available in φ1.0, φ1.2, φ1.6, φ3.0, φ5.0 - Operating Voltage: Compatible with various voltages including DC12V, DC24V, AC100V - Fluid Temperature: 10 to 50℃ - Fitting Sizes: M5 (P=0.8), M6 (P=1), 1/8", 1/4" *For more details, please refer to the PDF document or feel free to contact us.

• Other machine elements

The "Electromagnetic Valve AVS Type High Corrosion Resistance and High Sealing Orifice 1.2 to 5mm" is an electromagnetic valve that uses highly corrosion-resistant plastic in the fluid contact area. Due to the use of rubber in the valve sealing area, it has high sealing performance, making it suitable for medical devices and various analytical instruments. The main applications include the supply of chemical solutions and pure water. 【Specifications】 ■ Orifice: Available in φ1.2, φ1.6, φ3.0, φ5.0 ■ Operating Voltage: Compatible with various voltages including DC12V, DC24V, AC100V ■ Fluid Temperature: 10 to 50℃ ■ Fitting Size: M6 (P=1), 1/8", 1/4" *For more details, please refer to the PDF document or feel free to contact us.

• Other machine elements

The "Electromagnetic Valve AVH Type High Corrosion-Resistant Orifice 1.2 to 5mm" is an electromagnetic valve that uses corrosion-resistant plastic for the wetted parts. The diaphragm is made of corrosion-resistant plastic. Its main applications include the supply of chemical solutions and pure water. The orifices are available in sizes φ1.2, φ1.6, φ3.0, and φ5.0, and it supports various voltages including DC12V, DC24V, and AC100V. 【Specifications】 ■ Orifice: Available in sizes φ1.2, φ1.6, φ3.0, and φ5.0 ■ Operating Voltage: Supports DC12V, DC24V, and AC100V ■ Fluid Temperature: 10 to 50℃ ■ Connection Size: M6 (P=1), 1/8", 1/4" *For more details, please refer to the PDF document or feel free to contact us.

• Other machine elements

The "Inline Mixer Model MX" is a mixer that mixes fluids using the force of the flowing fluid. It can mix while transferring fluids without the need for a stirrer. All parts in contact with the fluid are made of corrosion-resistant plastic. The MX breaks down bubbles present in the liquid, increasing the surface area of the gas, making it easier for the gas to dissolve into the liquid. 【Specifications】 ■ Pressure resistance: 0 to 0.5 MPa ■ Fluid temperature: 10 to 200℃ ■ Connection sizes: 1/4", 3/8", 1/2", 3/4", 1" *For more details, please refer to the PDF document or feel free to contact us.

• Mixer/agitator

The "Pressure Control Valve HIBV Type" is a high-precision fluid pressure control valve that maintains a constant pressure on the primary side. The pressure on the primary side can be set by the operating air pressure. It achieves high precision and fast response. The main applications are the stabilization of pressure and flow in chemical liquid circulation. All wetted parts are made of corrosion-resistant plastic. 【Specifications】 ■ Pressure resistance: 0.3 MPa for both IN and OUT ■ Fluid temperature: 10 to 90℃ ■ Valve sizes: □65, ○90, ○130 ■ Fitting sizes: 1/4", 3/8", 1/2", 3/4", 1" ■ Recommended flow range: Supports 0.4 L/min to 45 L/min *For more details, please refer to the related links or feel free to contact us.

• valve

The "Pressure Control Valve HICV Type" is a high-precision fluid pressure control valve that maintains a constant pressure on the secondary side regardless of pressure fluctuations on the primary side. The pressure on the secondary side can be set by the operating air pressure. It achieves high precision and fast response. The main applications are the regulation of chemical solutions and pure water, and the stabilization of discharge flow rates at various use points. 【Specifications】 ■ Pressure resistance: 0.5MPa for both IN and OUT ■ Fluid temperature: 10 to 90℃ ■ Valve sizes: □45, □65, ○90, ○110, ○130 ■ Fitting sizes: 1/4", 3/8", 1/2", 3/4", 1" ■ Recommended flow rate range: Supports 0.4L/min to 45L/min *For more details, please refer to the PDF document or feel free to contact us.

• valve

The "NP Type Proportional Valve Manual Multi-Turn Type" is a needle valve designed for finely adjusting the flow of ultrapure water and corrosive fluids. With linear flow characteristics and high resolution, it offers excellent flow control, primarily used for precise flow regulation of chemical solutions and pure water. By combining the internal orifice diameter and diaphragm tip angle, a wide range of flow rates can be selected. 【Specifications】 ■ Pressure resistance: 0.5 MPa for both IN and OUT ■ Fluid temperature: 15 to 90℃ ■ Valve size: □30 ■ Fitting sizes: 1/4", 3/8" ■ Mounting: Panel mount *For more details, please refer to the PDF document or feel free to contact us.

• valve

At Advance Electric Industry Co., Ltd., we manufacture manifold valves according to your specifications. Various functional valves can be integrated into a manifold. All wetted parts are made of corrosion-resistant plastic. The main applications are the supply and drainage of chemical solutions and pure water. By molding the body and actuator, we can reduce costs compared to traditional machined products. 【Specifications】 ■ Pressure resistance: Depends on the specifications of each valve ■ Fluid temperature: Depends on the specifications of each valve ■ Valve size: Depends on the specifications of the manifold valve ■ Fitting sizes: 1/4", 3/8", 1/2", 3/4", 1" *For more details, please refer to the related links or feel free to contact us.

• valve

The "SAV type air-operated high-temperature valve" is a valve driven by a pneumatic actuator (cylinder). It opens and closes (ON/OFF) the valve through air operation. All parts in contact with the fluid are made of corrosion-resistant plastic, and the body and actuator are also made of corrosion-resistant plastic for safety considerations. It is compatible with manifold configurations, and its main applications are the supply of chemical solutions and pure water, as well as drainage. It can also be completely closed at equal pressure (0.3MPa/0.25MPa) for both IN and OUT. 【Specifications】 ■ Pressure resistance: 0.3MPa/0.25MPa for both IN and OUT ■ Fluid temperature: 10 to 180℃ / 10 to 200℃ ■ Valve sizes: □25, □35, □45, □65 ■ Fitting sizes: 1/4", 3/8", 1/2", 3/4", 1" *For more details, please refer to the PDF document or feel free to contact us.

• valve

The "SAV type manual multi-turn valve" is a valve that opens and closes (ON/OFF) by manually turning the handle. Its main applications are the supply of chemical solutions and pure water, as well as drainage. It can also be completely shut off at the same pressure for both IN and OUT (0.5MPa). It supports manifold integration and has reduced costs compared to traditional machined products through body and actuator molding. 【Specifications】 ■ Pressure resistance: 0.5MPa for both IN and OUT ■ Fluid temperature: 10 to 100℃ ■ Valve sizes: □25, □35, □45, □60 ■ Fitting sizes: 1/4", 3/8", 1/2", 3/4", 1" *For more details, please refer to the PDF document or feel free to contact us.

• valve

The "SAV type manual toggle valve" is a valve that opens and closes (ON/OFF) by manually switching the lever. All wetted parts are made of corrosion-resistant plastic, and by molding the body and actuator, costs have been reduced compared to traditional machined products. It is compatible with manifold configurations, and its main applications are the supply of chemical solutions and pure water, as well as drainage. It can also be completely shut off at equal pressure (0.5MPa) for both IN and OUT. 【Specifications】 ■ Pressure resistance: 0.5MPa for both IN and OUT ■ Fluid temperature: 10 to 100℃ ■ Valve sizes: □25, □35, □45, □60 ■ Fitting sizes: 1/4", 3/8", 1/2", 3/4", 1" *For more details, please refer to the PDF document or feel free to contact us.

• valve

The "SAV type air-driven valve" is a valve driven by a pneumatic actuator (cylinder). It opens and closes (ON/OFF) the valve through air operation. Its main applications are the supply and drainage of chemical solutions and pure water. It is compatible with manifold configurations and can be completely shut off even at the same pressure (0.5MPa) for IN and OUT. All parts in contact with the fluid are made of corrosion-resistant plastic, and by molding the body and actuator, costs have been reduced compared to traditional machined products. 【Specifications】 ■ Pressure resistance: 0.5MPa for both IN and OUT ■ Fluid temperature: 10 to 100℃ ■ Valve sizes: □25, □35, □45, □60 ■ Fitting sizes: 1/4”, 3/8”, 1/2”, 3/4”, 1” *For more details, please refer to the PDF document or feel free to contact us.

• valve

Our company is engaged in the development and manufacturing of precision valves used in the production of semiconductors essential for medical devices, environmental analysis equipment, and the rapidly evolving smartphones and artificial intelligence (AI). These valves are indispensable components in the semiconductor manufacturing process for smartphones. Additionally, they are highly regarded for their quality by world-class companies in the medical field and in analysis and biotechnology-related equipment. Please feel free to contact us if you have any inquiries. 【Business Areas】 ■ Semiconductor Field ■ Medical Field ■ Environmental Field *For more details, please download the PDF or feel free to contact us.

• valve