ギガ・セレクション-リミテッド（ギガセレクションリミテッド） List of Products and Services

■The 4-blade design allows for faster feed rates, achieving high-efficiency machining! ■The optimized groove shape exhibits excellent chip evacuation. ■Low cutting resistance minimizes burr formation. ■The larger top diameter results in a highly rigid chamfering cutter. ■Suitable for a wide range of materials, from general steel to difficult-to-cut materials and non-ferrous metals. *For more details, please download the PDF or feel free to contact us.*

• cutter

■Due to the multi-flute ball end mill, the feed rate can be increased, achieving high-efficiency machining! ■With ALCrN-based coating, it is suitable for mold steel as well as stainless steel and difficult-to-cut materials. ■Machining is possible up to HRC52 hardness. *For more details, please download the PDF or feel free to contact us.

• End Mills

■3-blade, 40-degree twist, roughing end mill for non-ferrous metal processing ■Low cutting resistance, quiet machining sound. Minimal workpiece deformation ■Excellent chip evacuation ■Corner parts are rounded, all are neck relief type *For more details, please download the PDF or feel free to contact us.*

• End Mills

- 3-flute, 45-degree twist end mill that excels in machining along the Z-axis - Exceptional chip evacuation achieved through a special shape of the bottom blade and large gash - Blade length is slightly short, ranging from 1.5D to 2.2D - Wide compatibility from general steel to difficult-to-machine materials due to high-quality ultra-fine particle carbide and high heat-resistant ALCrN coating *For more details, please download the PDF or feel free to contact us.

• End Mills

■4-blade, 35/38 degree twist, long blade type with a blade length of 4D to 5D ■Outstanding vibration resistance due to uneven division and uneven lead ■Wide compatibility from general steel to difficult-to-machine materials, thanks to high-quality ultra-fine particle carbide and high heat-resistant ALCrN coating *For more details, please download the PDF or feel free to contact us.*

• End Mills

■ Achieves seat boring processing in one step with a 180-degree full flat bottom blade. ■ Enables processing that was impossible with conventional drills, such as hole processing on slopes and correction of eccentric holes. Expectations for reduced burrs in thin plates and tolerance holes. ■ Special corner shape prevents chipping and reduces burrs. ■ By specially treating the surface of the drill bottom's gash area, friction with the workpiece is reduced. ■ Optimized groove design achieves excellent chip discharge and vibration resistance. *For more details, please download the PDF or feel free to contact us.

• drill

The reading drill allows for two processes: the chamfering process and the deburring process before drilling holes. *For more details, please download the PDF or feel free to contact us.*

• drill

■ Ball end mills specialized for resin processing with a 2-flute design and 30-degree twist ■ Standardized in both full-length and long-neck types, ranging from R0.1 to R3 ■ Excellent cost performance *For more details, please download the PDF or feel free to contact us.*

• End Mills

■Square end mill specialized for resin processing with 2 blades and 30-degree twist ■Standardized in full length and long neck types from Φ0.2 to Φ6 ■Outstanding cost performance *For more details, please download the PDF or feel free to contact us.*

• End Mills

■ 3-flute, 40-degree twist, end mill specialized for machining non-ferrous metals in the Z-axis direction ■ Exceptional chip evacuation achieved through a special shape of the bottom blade and large gash ■ Vibration prevention through uneven division ■ Medium-length blade of approximately 2.5D ■ Excellent wear resistance with smooth ZrN-based coating *For more details, please download the PDF or feel free to contact us.*

• End Mills

■Achieving high-speed and high-efficiency processing in non-ferrous metal machining ■Coolant sprays out from the oil hole on the outer circumference, improving chip removal, weld resistance, surface finish, and extending tool life ■Chip breakers on the outer and bottom edges result in shorter chips ■Excellent vibration resistance due to uneven division and uneven lead ■Smoothly polished grooves allow for smooth chip removal *For more details, please download the PDF or feel free to contact us.*

• End Mills

■3-flute, 45-degree twist, pin-end specification end mill ■Non-coated type, suitable for machining non-ferrous metals including aluminum ■Sharp cutting edges provide excellent cutting performance and a clean finish is expected ■Available in two types: medium length (standard type) with a cutting length of approximately 2.5D, and long neck type with a longer effective length *For more details, please download the PDF or feel free to contact us.

• End Mills

■ Adapted for machining high hardness materials up to HRC68 with a TiSi-based coating that has a very high heat resistance temperature. ■ Ideal for finishing high-feed machining from general steel and cast iron to difficult-to-cut materials. ■ Precision finishing with minimal collapse. ■ Outstanding cost performance. *For more details, please download the PDF or feel free to contact us.*

• End Mills

■4-blade, 35/38 degree twisted radius end mill ■Outstanding vibration resistance due to uneven division and uneven lead ■Wide compatibility from general steel to difficult-to-machine materials thanks to high-quality ultra-fine particle carbide and high heat-resistant ALCrN-based coating *For more details, please download the PDF or feel free to contact us.*

• End Mills

■ 2-flute, 35-degree twist, pin end mill specification ■ Blade length ranges from 2.5D to 3D medium length ■ Capable of handling a wide range from general steel to difficult-to-cut materials due to high-quality ultra-fine particle carbide and high heat-resistant ALCrN-based coating *For more details, please download the PDF or feel free to contact us.

• End Mills

■4-blade, 37/40 degree twist, short blade type ■Outstanding vibration resistance due to uneven division and uneven lead ■Wide compatibility from general steel to difficult-to-machine materials due to high-quality ultra-fine particle carbide and high heat-resistant ALCrN coating ■Ideal for groove machining and processing on automatic lathes *For more details, please download the PDF or feel free to contact us.*

• End Mills

■ 4-flute, 40-degree spiral roughing end mill ■ Quiet cutting sound due to the adoption of uneven division and 40-degree spiral ■ Low resistance achieved with fine pitch, reducing surface roughness ■ Moderate corner C-face to prevent chipping ■ Wide compatibility from general steel to difficult-to-cut materials with high-quality ultra-fine particle carbide and high heat-resistant ALCrN coating ■ Added variations with different blade lengths and slim shank types ■ Excellent cost performance *For more details, please download the PDF or feel free to contact us.*

• End Mills

■ Latest ultra-fine particle super hard ■ Improved wear resistance with high-temperature resistant TiSi-based coating ■ Excellent vibration damping performance with uneven division and uneven lead (39/42 degrees) ■ High rigidity with a shape that increases core thickness towards the shank ■ High performance on harder work materials with HRC 35 or higher, such as stainless steel and Inconel, which are difficult to machine *For more details, please download the PDF or feel free to contact us.*

• End Mills

■ 4-flute, 40-degree twist, a highly versatile end mill suitable for everything from roughing to finishing ■ Large chip pocket design ensures good chip evacuation ■ Irregular division prevents chatter ■ Medium length of about 2.5D ■ High-quality ultra-fine particle carbide and high heat-resistant ALCrN coating allow for a wide range of applications from general steel to difficult-to-cut materials ■ Outstanding cost performance *For more details, please download the PDF or feel free to contact us.*

• End Mills

- The straight blade and large K-Value allow for high feed rates, achieving high-efficiency machining. - The large chip pocket provides excellent chip evacuation. - The chamfering at the corners reduces burrs on through holes. - The tool shape is easy to re-sharpen. - A versatile drill that works with various materials. - Outstanding cost performance. - There is also a type with oil holes that effectively guide coolant to the groove side (DRSOH). *For more details, please download the PDF or feel free to contact us.

• drill

■Demonstrates stable performance under various cutting conditions, such as high or low spindle speeds and feed rates, high or low coolant pressure, and the presence or absence of step machining. ■Low cutting resistance and minimal load on the spindle. ■Polished grooves prevent welding and allow for smooth chip evacuation. ■Large S-shaped chip pockets achieve excellent chip evacuation. ■Chamfering at the corners prevents chipping and reduces burrs. ■Large core thickness ensures rigidity. ■Double margins improve straightness. *For more details, please download the PDF or feel free to contact us.*

• drill