関東アスコン List of Products and Services

This is a device for blasting in a box-shaped workroom. It has a blast tank and comes in two types: a "direct pressure" type that injects pressurized air and a "suction" type that injects by suction using negative pressure. It can be optionally modified to include a table cart. There is also a large type (2m x 2m) available in the lineup.

• Other surface treatment equipment

This is a wet blast unit that can be combined with a dry blast device. The abrasive material is moistened to the extent that almost no water remains on the ground after blasting. Drying begins immediately after blasting. It can be attached and used with conventional air blast devices. The nozzle adapter at hand allows for ON/OFF control of the water flow and fine adjustments of the water volume. By fine-tuning, the water flow can be narrowed down to 100-200 CC/min. Water is pressurized (10:1) with a plunger pump and injected at high pressure. It is also suitable for long-distance blasting (300m or more). Rust inhibitors can be used in conjunction. A separate diaphragm pump allows for the use of stored water from tanks, etc.

• Other surface treatment equipment

This is a device for vacuum recovery of abrasive materials after blasting work. ■ Powerful large Roots blower unit (90 kW) ■ Includes cyclone and dust collector ■ Includes cartridge filter (pulse jet) ■ Capable of recovering up to 300 m ■ Compatible with recovery hoses up to 300 mm in diameter When combined with an optional hopper with a collision plate, recycling blasting becomes possible.

• Other abrasives

■Steel grit with custom processing to increase hardness ■Conventional product hardness: HV 700 and above; GRH hardness: approximately HV 900 ■Less prone to cracking, allowing for more reuse than conventional products ■Less prone to cracking, reducing dust dispersion during blasting

• Other abrasives

■Dust-proof mask for blasting work ■Full face type with good visibility ■Equipped with air volume adjustment valve ■Cooling tube can be attached as an option ■Compliant with international standards ・NIOSH ・OSHA *The approved product is Apollo 600.

• mask

■Air-operated aftercooler ■Compatible with compressors up to 100 horsepower ■Eliminates the need for power supply, cooling compressor air and removing moisture using the power of an air motor ■Removes moisture from the intake air during blasting operations and supplies dry air

• Pneumatic Equipment

■ Eliminates the need for hoses and wiring for the remote control that were present in conventional blast devices. Wireless remote control operation is possible. ■ Long-distance operation is possible by installing a relay. ■ Operation allows switching between "blast, stop, and air blow." * Customizable. ■ Enhanced safety features to prevent misoperation.

• Other environmental equipment

We would like to introduce our "Cyclic Sustainable Blast Equipment" that we handle. Since it can be freely combined to suit the site, it enhances work efficiency safely. Additionally, it incorporates devices that minimize waste, making it environmentally friendly. 【Product Lineup】 ■ Continuous Blast Machine, 2-Nozzle Type "CB Model" ■ Bucket-Type Abrasive Sorting Machine "VD Model" ■ Continuous Recovery Hopper Tank "CSH Model" ■ Roots Blower Type Recovery Device "SP Model" *For more details, please download the PDF or feel free to contact us.

• Wafer processing/polishing equipment

The "VD-32" is a circulating abrasive sorting machine that transports abrasive material to the feed hopper located at the bottom using a bucket elevator, and cleans the abrasive material. It is equipped with a dust collector to remove dust and particles generated inside. Additionally, we also offer the "VD-37," which includes a bucket elevator and storage hopper. 【Specifications】 ■ Overall height: 3,145mm ■ Inlet height: 1,064mm ■ Conveying capacity: 3,000kg/hour for garnet sand ■ Power: Single-phase 200V 50/60Hz *For more details, please download the PDF or feel free to contact us.

• Automatic sorting machine

The "CB85-2" is a continuous two-stage blast tank that allows for the replenishment of abrasive material without stopping the blasting operation. By adopting the abrasive flow control valve "Thompson Type 1 Valve," unnecessary abrasive consumption is reduced. By combining it with a recovery machine and a recovery sorting machine, abrasive recycling blasting becomes possible. 【Specifications (excerpt)】 ■ Capacity: 28.3×2 stages ■ Dimensions: W800×L800×H1820mm ■ Number of operators: 1-2 people ■ Valve: Thompson Type I Valve ■ Standard nozzle: 8φ×2 (projection amount 7.6kg/min×2) *For more details, please download the PDF or feel free to contact us.

• Other processing machines