NDTマート＆レンタル Product Lineup

PT-TSCT2 is a mock test piece that can be used for practical exam preparation and technical training for Level 2 Penetrant Testing (PT). It is designed in the shape of a T-shaped pipe joint, simulating post-emulsifiable fluorescent penetrant testing, allowing training under conditions close to actual inspection targets. Since it enables practice in an environment similar to the practical exam, it is suitable for training in the procedures of penetrant testing and defect detection. The T-shaped pipe joint structure allows for inspection practice on surface conditions that are similar to actual structures, such as welds and areas with shape changes. It provides practical training for a series of PT inspection processes, including penetrant application, removal of excess penetrant, developing, and confirming defect indications.

• Other inspection equipment and devices
• Testing Equipment and Devices

The Flexible Duplex IQI 13D is a flexible type of multi-line image quality indicator used for image quality evaluation in digital radiographic testing (DR/CR). It can assess the sharpness and spatial resolution of X-ray images, and is useful for confirming image quality and evaluating equipment performance in digital RT inspections. Its flexible structure allows it to be closely adhered to inspection targets such as pipes and curved surfaces, making it suitable for curved imaging, which is difficult to address with conventional flat image quality indicators. It complies with standards such as JIS Z2307, ISO 19232-5, and ASTM E2002, contributing to quality control and optimization of imaging conditions in digital X-ray inspections.

• Radiation detector
• Other inspection equipment and devices
• X-ray inspection equipment

The Duplex IQI 13D is a multi-wire image quality indicator (Duplex IQI) used for image quality evaluation in digital radiographic testing (DR/CR). It features wire pairs ranging from Φ0.8mm to Φ0.05mm, allowing for quantitative assessment of image resolution based on identifiable wire diameters. It is useful for evaluating the performance of digital X-ray systems and CR systems, optimizing imaging conditions, and verifying inspection quality. Additionally, it complies with various standards such as JIS Z2307, ISO 19232-5, and ASTM E2002, and is aligned with international RT inspection standards.

• Radiation detector
• Other inspection equipment and devices

The UT2-SET is a set of mock test pieces that can be used for practical exam preparation and technical training for Ultrasonic Testing (UT) Level 2. It is designed to simulate actual practical exams and consists of a total of five pieces, including vertical testing specimens, angled testing specimens, pipe testing specimens, as well as RB-41 and RB-42 specimens. It allows for practice under conditions close to actual exams, aiding in the acquisition of practical flaw detection skills. It accommodates both vertical and angled testing methods, enabling efficient training of practical skills necessary for UT inspection, such as probe operation, defect location identification, and echo reading. It is suitable not only for qualification exam preparation but also for in-house training, skill development, and enhancing the skills of inspection technicians. *Please note that the use of pipe (curved material) test pieces in the UT Level 2 practical exam will end in the spring 2025 recertification exam.*

• Other inspection equipment and devices

UT1-SET is a set of mock test pieces that can be used for practical exam preparation and training for ultrasonic testing (UT). It is designed for the practical exam at UT Level 1 and consists of a total of three pieces: two test pieces for vertical testing and one test piece for angled testing. It allows practice under conditions similar to actual practical exams, making it useful for training in testing operations, defect detection, and mastering inspection techniques. It supports practice for both vertical and angled testing, enabling practical training in operating the probe, identifying defect locations, and interpreting testing results. It can be utilized for a wide range of purposes, including educational institutions, in-house corporate training, and qualification exam preparation.

• Other inspection equipment and devices

The A1-MIC is a test piece of the same dimensions as the STB-A1, which can be used for adjusting and practicing ultrasonic testing (UT). It is manufactured to the same dimensions as the STB-A1 test piece, which is widely used in JIS standards, and can be utilized for educational purposes in basic adjustments of ultrasonic flaw detectors, such as confirming the incident point of angled transducers, measuring refracted angles, adjusting sensitivity, and verifying measurement ranges. Since it has the same shape as the STB-A1 test piece, it is suitable for practicing and adjusting equipment, making it ideal for basic training in ultrasonic testing and confirming transducer characteristics. It can also be used for routine inspections, equipment operation checks, and pre-work checks, contributing to improved accuracy in ultrasonic testing tasks. This test piece is suitable for training and checking purposes in ultrasonic testing within non-destructive testing companies, manufacturing industries, and educational institutions, contributing to the enhancement of UT inspection skills and the maintenance of inspection quality.

• Other inspection equipment and devices

The YokeLite-100V is an AC hand magnet (gap-type magnetizer) used for magnetic particle testing (MT). With a lightweight and compact design of approximately 2.4 kg, it is easy to handle and allows for efficient non-destructive testing operations on-site. It generates a powerful alternating magnetic field, supporting the detection of defects such as cracks in welds and on metal surfaces. It features a variable yoke structure that can flexibly accommodate various shapes of inspection targets, including curved surfaces, corners, and fillet welds. It ensures a lifting power of over 4.5 kg, providing sufficient magnetization capability required for magnetic particle testing. Additionally, by equipping optional UV lights or white lights, it can support a wide range of inspection methods, including fluorescent magnetic particle testing and visual inspections. This hand magnet is useful for defect inspection and quality control in the fields of manufacturing, plant equipment, and welding inspection. It combines lightweight design with high inspection performance, contributing to improved work efficiency.

• Other inspection equipment and devices
• Testing Equipment and Devices

The PRO-400BP is a blacklight equipped with a wireless shutter that allows for simultaneous ultraviolet irradiation and smartphone photography. It uses a 365nm UV-LED and is compatible with fluorescent testing methods such as magnetic particle testing (MT) and penetrant testing (PT) in non-destructive testing (NDT). It vividly illuminates fluorescent materials, contributing to improved visibility of defects. Equipped with a Bluetooth wireless shutter, it enables smartphone camera photography while the blacklight is on. This allows for immediate recording of inspection results, supporting the creation of inspection records and streamlining reporting tasks. It has a wide irradiation range, making it suitable for efficient inspection work. Furthermore, it complies with various non-destructive testing standards such as JIS, ASTM, and Rolls-Royce, providing a reliable inspection environment. This blacklight facilitates fluorescent testing and the digitization of inspection records in fields such as non-destructive testing companies, manufacturing, and equipment maintenance.

• Work Light
• Other inspection equipment and devices

The SL8804-S is a tabletop stand-type black light suitable for non-destructive testing and fluorescent inspection. With high-intensity UV irradiation (approximately 13,000µW/cm² at 38cm), it vividly illuminates fluorescent materials used in fluorescent magnetic particle testing (MT) and fluorescent penetrant testing (PT), contributing to improved visibility of defects. Being a tabletop stand type allows for both hands to be free, making it suitable for inspecting small parts and for inspection processes that require continuous work. The angle and height of the irradiation can be adjusted, allowing for optimal positioning based on the inspection target and work environment. It also features a dimming function, enabling light intensity adjustments according to the application. As a stable tabletop type, it helps reduce the burden on operators and improve inspection efficiency. This tabletop black light can be utilized in various fields conducting fluorescent inspections, such as quality control in manufacturing, non-destructive testing, and electronic component inspection.

• Other inspection equipment and devices
• Work Light

The PX-45C SUP is a smart black light for non-destructive testing that integrates ultraviolet irradiation and camera functions. It is equipped with a 365nm UV-LED, making it suitable for fluorescent testing methods such as fluorescent magnetic particle testing (MT) and fluorescent penetrant testing (PT). It vividly illuminates fluorescent materials adhered to defect areas, contributing to improved visibility during inspections. The device features an HD camera and an Android system, allowing for on-site capture and recording of inspection results. The captured image data can be shared with the cloud or devices via Wi-Fi communication, supporting the management of inspection records and streamlining reporting tasks. Additionally, it has an IP67 rating for dust and water resistance, making it safe to use in harsh environments such as factories and outdoors. This smart black light realizes the efficiency of fluorescent testing and the digitization of inspection records in fields such as non-destructive testing companies, manufacturing, and equipment maintenance.

• Other inspection equipment and devices
• Work Light

The SPN-VIN365 is an LED black light suitable for fluorescent magnetic particle testing (MT) and fluorescent penetrant testing (PT) in non-destructive testing. It is equipped with two 365nm UV-LEDs that emit high-output ultraviolet light at approximately 5,500µW/cm². This causes fluorescent materials adhered to defect areas to glow brightly, contributing to improved visibility and accuracy during inspections. The irradiation range is approximately 15cm in diameter, allowing for a wide inspection area to be checked at once, which effectively enhances work efficiency. Its sealed structure makes it resistant to dust and water droplets, ensuring safe use in various field environments such as factories and outdoors. Moreover, it achieves a price range that is easier to adopt compared to conventional models, enabling the establishment of a high-performance UV inspection environment while keeping costs down. This LED black light can be utilized in various settings that conduct fluorescent testing, including non-destructive testing companies, manufacturing industries, and plant equipment inspections.

• Work Light
• Other inspection equipment and devices

The FV-2014IRIS is a dual-luminance film viewer (showcase) suitable for the observation and evaluation of radiographic testing (RT) films. Its design combines a large main observation area with an ultra-high brightness spot observation area, allowing for efficient observation of RT films with various densities and sizes. The spot observation area achieves a maximum brightness of 280,000 cd/m² and can accommodate film densities up to 4.5D, enabling clear observation even for high-density films. Equipped with an electronic light mask function, it allows for adjustment of the observation range according to the film size. Additionally, the spot aperture (Φ5–100mm) enables detailed observation of specific areas, such as welds. With uniform illumination and high visibility, it facilitates efficient defect detection and film evaluation. This high-performance film viewer is ideal for film observation and quality control in RT inspections for non-destructive testing companies, manufacturing industries, and plant equipment inspections. It contributes to improved inspection accuracy and enhanced work efficiency.

• X-ray inspection equipment
• Other inspection equipment and devices

The SC18-DL-LED is a high-brightness LED film viewer (showcase) suitable for observing X-ray films used in non-destructive testing (RT). It employs a high-brightness LED light source with a maximum brightness of 100,000 cd/m², allowing for clear observation of RT films with a film density of up to 4.0D. With uniform and stable illumination, it supports high-precision film evaluation, such as confirming welds and defects. The main unit features a thin and compact design with a thickness of approximately 25mm, making it easy to utilize workspace effectively without being limited by installation location. Additionally, its fanless design ensures a quiet environment for film observation without noise. It maintains stable light output while providing high brightness, enhancing the efficiency of inspection work and visibility. This high-performance LED film viewer is ideal for film observation and evaluation in RT inspections for non-destructive testing companies, manufacturing industries, and plant equipment inspections. It contributes to improving quality control and inspection accuracy.

• X-ray Inspection Machine
• Other inspection equipment and devices

The DT-300PLUS is a built-in light source film densitometer designed for measuring the density of X-ray films used in non-destructive testing. It supports a wide measurement range of 0.00 to 6.00D, achieving high-precision measurements of ±0.04D and excellent reproducibility of ±0.01D, thereby providing precise support for film density management in non-destructive testing. With a tabletop design that incorporates the light source into the main unit, it allows for easy density measurements in a stable measurement environment. The operation is simple, featuring a multi-point calibration function controlled by buttons, enabling accurate measurements in a short time. By using an aluminum alloy arm, it ensures stability and durability, maintaining high reproducibility even with repeated measurements. This high-precision film densitometer is suitable for film density management, quality control, and maintaining inspection accuracy in non-destructive testing (RT), making it applicable across a wide range of fields, including inspection agencies, manufacturing, and research institutions.

• X-ray inspection equipment
• Other inspection equipment and devices

The CM30FN is a high-performance dual-type thickness gauge that supports both ferrous and non-ferrous substrates. It features electromagnetic (F) and eddy current (N) measurement methods, allowing for accurate measurement of coating thickness on materials such as iron and aluminum. Its ability to measure the thickness of paints, plating, and coatings with high precision makes it suitable for a wide range of applications in quality control and paint inspection in the manufacturing industry. It supports high-resolution display with 0.1μm accuracy for measurements under 100μm, making it ideal for precise measurement of thin films. Additionally, it offers graph and statistical display of measurement data, enabling management of paint quality by checking averages, maximums, and minimums. Furthermore, it is equipped with IP68 dust and waterproof performance, ensuring safe use in various environmental conditions such as factories and outdoors. This high-performance portable thickness gauge can be utilized in various settings, including paint management for steel structures, automotive parts, and metal products, as well as quality control in surface treatment processes.

• Coating thickness gauge
• Other measurement, recording and measuring instruments

The KC-260FN is a dual-mode portable thickness gauge that supports both ferrous and non-ferrous substrates. It features electromagnetic (F) and eddy current (N) measurement methods, allowing for the measurement of coating thickness on materials such as iron and aluminum. It can accurately measure the thickness of paints, plating, and coatings, making it useful for a wide range of applications including quality control and paint inspection. It supports high-resolution display with 0.1μm accuracy for measurements under 100μm, making it suitable for thin film measurements. Measurement data can be displayed statistically as averages, maximums, minimums, and standard deviations, which aids in evaluating paint quality and process management. Additionally, measurement data can be stored in the device and transferred to a PC for record management and report generation. This high-performance portable thickness gauge is useful for paint quality management of automotive parts, metal products, steel structures, and can be utilized in various settings such as manufacturing sites and equipment inspections.

• Coating thickness gauge
• Other measurement and measuring equipment

The CT3500 is a portable thickness gauge that supports a wide range of coating thickness measurements from thin films to thick films. It employs a dual measurement method using electromagnetic and eddy current techniques, allowing for automatic differentiation between ferrous and non-ferrous substrates to measure coating thickness. The measurement range accommodates up to 3,500μm, making it suitable for measuring various coatings, including general paint, heavy-duty anti-corrosion coatings, and linings. With a measurement speed of approximately 0.2 seconds, it can efficiently measure multiple locations, making it ideal for inspection tasks that require numerous measurements. Its compact and portable design makes it suitable not only for quality control within factories but also for on-site equipment inspections and paint inspections. It can be utilized for a wide range of applications, including paint management for bridges and steel structures, anti-corrosion coating measurements for pipes and tanks, and quality control in manufacturing environments. The CT3500 is a high-functionality portable thickness gauge that provides stable measurements from thin to thick films, making it well-suited for field use.

• Coating thickness gauge
• Testing Equipment and Devices

The KH-260plus is a compact rebound-type portable hardness tester designed for easy hardness measurement, with a palm-sized design. Its small and lightweight (approximately 110g) construction makes it easy to carry, allowing it to be used in various scenarios such as on-site inspections and equipment checks. By simply applying the impact device to the measurement target, it can quickly measure the hardness of metallic materials, enabling efficient inspection work. The measurement results can be automatically converted into multiple hardness scales, including HL (Leeb hardness), HB (Brinell), HV (Vickers), and HRC (Rockwell), based on the HL standard. It supports hardness evaluation of a wide range of metallic materials, including steel, cast iron, and aluminum. Additionally, it features an organic EL display for clear visibility of measurement results. The measurement data can be stored in the main unit, making it convenient for data management on-site. This compact portable hardness tester can be utilized in various fields, including quality control of mechanical parts and metal products, equipment maintenance, and material evaluation.

• Other measurement, recording and measuring instruments
• Other inspection equipment and devices

The KH-180 is a high-performance rebound portable hardness tester designed to streamline hardness measurement on-site. By simply applying the impact device to the measurement target, it can quickly measure the hardness of metal materials, making it suitable for a wide range of applications such as equipment inspection and quality control. Its compact design makes it easy to carry and suitable for inspection tasks in the field. The measurement results can be automatically converted into multiple hardness scales, including HB (Brinell), HV (Vickers), and HRC (Rockwell), based on HL (Leeb hardness). Furthermore, it can simultaneously display three hardness scales, and the measurement data can be visualized in graph form, allowing for a clear understanding of hardness trends and variations. It also features an impact direction correction function, accommodating measurements in various positions. This portable hardness tester can be used in various fields such as quality control of metal parts and castings, equipment maintenance, and material evaluation. It is equipped with a large-capacity memory, making it convenient for managing and recording measurement data.

• Other inspection equipment and devices
• Testing Equipment and Devices

The KH-160 is a rebound-type portable hardness tester that allows for easy hardness measurement on-site. By simply applying the impact device to the measurement target, it can quickly measure the hardness of metallic materials, making it suitable for a wide range of applications such as equipment inspection and quality control. Its compact and lightweight design makes it easy to carry, making it ideal for inspection tasks in factories and on-site. The measurement results can be automatically converted into multiple hardness scales, including HL (Leeb hardness), HB (Brinell), HV (Vickers), and HRC (Rockwell), based on the HL standard. It accommodates hardness evaluation of various metallic materials, such as steel and castings. Additionally, it features an impact direction correction function, allowing for stable measurement results even when the measurement posture changes on-site. This portable hardness tester can be utilized in various fields, including quality control of mechanical parts and metallic materials, equipment maintenance, and inspection of cast products. It supports reliable measurements with a calibration certificate included.

• Other inspection equipment and devices
• Testing Equipment and Devices

A high-performance ultrasonic thickness gauge that allows you to check measurement results with waveform display. The UM-5DL is a high-performance model equipped with A/B scope waveform display, enabling thickness measurements while confirming not only the measured values but also the echo waveforms. Even for difficult-to-measure targets such as corroded materials and castings, reliable measurements can be achieved by assessing the waveforms. Additionally, it features a through-paint function that allows for measuring the thickness of the base material over coatings and paints, enabling efficient inspection work without removing the paint film. With a rich set of features such as gate adjustment and sensitivity settings, it can flexibly adapt to various sites and materials. The large-capacity memory also ensures smooth management of measurement data. It is ideal for maintenance inspection and quality control of plant equipment, piping, tanks, and castings. This ultrasonic thickness gauge, focused on reliability, achieves accurate measurements through waveform confirmation, making it suitable for professionals.

• Testing Equipment and Devices
• Other measurement, recording and measuring instruments

The EMAT WIFI is an electromagnetic ultrasonic (EMAT) thickness gauge that allows for thickness measurement without the need for couplants. Unlike traditional ultrasonic thickness gauges that require the application of couplants, this device enables thickness measurement simply by placing the probe on the measurement target, thereby improving the efficiency of inspection work. It can measure materials with paint, scale, or slight surface roughness, significantly reducing the need for pre-treatment. Additionally, it is equipped with WiFi communication capabilities, allowing for the confirmation and management of measurement data and waveforms in conjunction with smartphones and tablets. This facilitates smooth sharing of measurement results and data management on-site. It is ideal for measuring wall thickness and conducting corrosion inspections in plant equipment, piping, tanks, and steel structures. This product contributes to the efficiency and reliability of thickness measurement in the field of non-destructive testing (NDT), such as maintenance inspections and equipment diagnostics.

• Other measurement, recording and measuring instruments
• Other inspection equipment and devices

The NDT Mart confidently recommends this ultrasonic thickness gauge, which features a resolution of 0.01mm and a through-paint function. This high-performance ultrasonic thickness gauge is equipped with a through-paint function that allows for the measurement of the substrate's thickness without removing the paint. You can accurately measure the thickness of the substrate without stripping the paint. The KT-310D is an innovative ultrasonic thickness gauge that breaks the conventional norms of thickness gauges with its low price and performance.

• Testing Equipment and Devices
• Other inspection equipment and devices