YAMABISHI List of Products and Services

The YRW series lithium-ion energy storage system for public industries addresses various energy challenges such as power leveling during normal times through peak shifting, utilization of renewable energy, securing power during disasters, and BCP measures. 【Features】 - A wide range of capacities from 10 to 200 kW - Available in both integrated battery and separate types, allowing flexible adaptation to installation environments - A rich lineup that meets a wide range of needs in terms of capacity, number of phases, and motor loads - Standalone operation specifications are defined with UPS grade, providing stable power to loads - Seamless transition to standalone operation during power outages - Equipped with highly reliable lithium-ion batteries, maintaining over 80% capacity after 15,000 cycles (DOD 100%) - Multiple PV MPPT DC/DC converters available, allowing flexible selection of solar panel capacity - Adopts a "DC link method" for storing solar power in its direct current form

• power supply
• UPS/Uninterruptible Power Supply
• Lithium-ion battery

"SmartSC" is a technology developed by our company to maximize self-consumption of solar power. It is a system that uses electricity generated from solar power installed on-site without selling it to the power company, allowing factories and stores to consume the electricity they produce. This reduces the amount of electricity purchased from the power company, leading to lower electricity costs. By predicting power generation based on weather forecast data up to 36 hours in advance and estimating power consumption from actual consumption data, we identify any surplus or deficit in power generation relative to consumption, and manage the appropriate state of charge (SOC) for the battery storage. 【Features】 ■ Ability to store excess electricity for use at night or during other times ■ Access to electricity even during prolonged large-scale power outages ■ Reduction in basic electricity fees ■ Weather forecasts up to 36 hours in advance ■ Efficient use of battery storage based on predictions *For more details, please refer to the PDF document or feel free to contact us.

• Solar power generator

"SmartSC" is an optimization control system that maximizes the full potential of storage batteries by predicting surplus electricity in a self-consumption system that combines solar power generation and storage batteries. By consuming the stored electricity based on surplus predictions derived from generation and load forecasts, it maximizes "surplus utilization" while maintaining a high charging rate of the storage batteries. Additionally, it leverages the high charging rate to reduce basic electricity charges through "peak cutting," and maximizes "power supply to critical loads" as a BCP during disasters. "SmartSC" is standardly equipped with technology that maximizes these three effects brought by storage batteries. 【Effects】 ■ Maximizes the effects of "surplus utilization," "peak cutting," and "BCP" ■ Generation forecasts up to 36 hours ahead using the Japan Meteorological Agency's "meso model" ■ Load forecasts up to 36 hours ahead based on load and temperature history and temperature predictions ■ Provides profitability simulations *For more details, please refer to the PDF document or feel free to contact us.

• Power storage device
• Other energy equipment

From lithium-ion batteries used in mobile phones and laptops to batteries used in hybrid cars, a wide variety of batteries are utilized. In the development of these battery application devices, obtaining fundamental data such as the durability of the built-in batteries is essential for verifying the reliability of the application products. However, traditionally, building such systems required separate preparation of charging and discharging devices (as there are no large-capacity ones), data loggers, and software to control them, making it difficult in terms of time and cost. Recently, we have developed a new charging and discharging device specifically for battery charging and discharging, along with dedicated data loggers and software. 【Features】 - Compact and high efficiency - Diverse control modes - Achieves high-speed response - Interfaces support Ethernet and CAN - Local operation uses a touch panel and jog dial - Custom products can also be manufactured

• Testing Equipment and Devices
• power supply
• Testing Equipment and Devices

The "YSB Series" is a power system optimized for long-duration backup. Equipped with long-life, high-capacity storage batteries, it achieves long-duration backup that typical UPS systems cannot support. It backs up loads that cannot afford to stop even during prolonged power outages due to disasters, supporting business continuity. The YSB Series offers two types tailored to different scenarios: (1) The <Slim Type> YSB-5K, which can be installed like a bookshelf (2) The <Caster Type> YSB-5KC, which requires no installation work for transport 【Features】 ■ High output: Single-phase 2-wire 100V 5kVA/4kW ■ Large capacity: 8.2kWh (nominal capacity) ■ High efficiency: Over 97% during normal operation / Over 93% during autonomous operation (rated operation) ■ Fast switching: Switches within 10ms during power outages/restorations ■ Overload tolerance of 120% (for 1 minute), allowing use with loads that generate inrush currents, such as incubators ■ Long-life domestic lead-acid batteries adopted (expected lifespan of about 10 years) ■ Maintenance cycle of 10 years significantly reduces running costs ■ Batteries can be expanded up to a maximum of 4 units *For more details, please refer to the PDF document or feel free to contact us.

• Power storage device
• power supply
• UPS/Uninterruptible Power Supply

The SFT series is a highly reliable medium to large capacity uninterruptible power supply (UPS). During normal operation, it rectifies commercial power (AC) and supplies AC power (sine wave) again through an inverter. In the event of a power outage, it switches the inverter's input to the battery for uninterrupted power supply, utilizing a constant inverter power supply method. It is available in a range from medium (5kVA) to large (200kVA) to support various plants and information communication systems. 【Features】 - Since it is always powered by the inverter, it has the ability to absorb noise and surges. - The switching time during power outages and restoration is instantaneous and has no impact on the load. - In the event of a device malfunction or overload, it automatically switches to bypass mode without interruption. - After recovering from overload, it automatically returns to inverter power supply (auto return). - It maintains a clean and quiet environment with low noise levels. - Battery hold time: The backup time during a power outage is approximately 10 minutes at rated load and about 30 minutes at half load.

• power supply
• Power Supplies
• UPS/Uninterruptible Power Supply

The best solution for long-term power outages is a generator, but there is a delay between the occurrence of the outage and the startup of the generator. The SFT-D series is an uninterruptible power supply (UPS) designed to fill that gap. This device uses its built-in battery to supply power without interruption during an outage while simultaneously starting the generator. Once the generator is confirmed to be operating stably, it switches from battery power to generator power. Additionally, when the power outage is resolved, it synchronizes with the commercial power supply before switching back to it. 【Features】 - It has the ability to absorb noise and surges since it is always powered by an inverter. - The switching time during power outages and restorations is instantaneous and does not affect the load at all. In the event of a device malfunction or overload, it automatically switches to bypass mode without interruption. - After recovering from an overload, it automatically returns to inverter power (auto-return). - The generator uses low-cost diesel fuel. - It operates at low noise levels, minimizing external impact. *The generator is sold separately.

• power supply
• Power Supplies
• UPS/Uninterruptible Power Supply

The "SYN Series" is a stationary frequency converter that primarily performs conversion between 50Hz and 60Hz. It can supply highly stabilized constant voltage and constant frequency AC power to loads. The inverter section uses IGBT technology, and through PWM high-frequency switching, it instantaneously controls the waveform to ensure that the output voltage waveform is always a low-distortion sine wave. It flexibly accommodates a wide range of loads, including increasingly dense electronic devices, computers, and rotating machinery. 【Features】 ■ Instantaneous waveform control (sine wave for nonlinear loads) ■ Isolation between input and output ■ Low noise and energy-saving ■ Compact and lightweight ■ Switchable between 100V and 200V (single-phase 5 to 20 kVA) *For more details, please refer to the PDF materials or feel free to contact us.

• power supply
• Power Supplies
• Testing Equipment and Devices

The "SYN-M Series" is a frequency converter designed with consideration for the starting current during motor startup, providing instantaneous overload capacity. It has a capacity of 600% (6 times) for 2 seconds. It allows for drive testing under the same conditions as commercial power sources, even for full-voltage motors. Furthermore, it enables optimal configurations based on rated current and starting current, achieving cost reduction and space-saving. 【Features】 ■ Achieves a cost reduction and space-saving of approximately 20-40% compared to capacity selection based on starting current (compared to our company) ■ Allows for drive testing under the same conditions as commercial power sources, even for full-voltage motors ■ The CVCF (Constant Voltage, Constant Frequency) inverter enables constant output even with fluctuations in commercial voltage and frequency ■ Easy setting of output frequency *For more details, please refer to the PDF materials or feel free to contact us.

• power supply
• Power Supplies
• Testing Equipment and Devices

The "SYN/TM Series" is a frequency converter designed with consideration for the starting current of top-runner motors, allowing for instantaneous tolerance. It has a tolerance of 1000% (10 times) of the rated capacity for 2 seconds. It enables driving tests under the same conditions as commercial power sources, even for motors using the full voltage method. Furthermore, it allows for an optimal configuration based on the rated current and starting current, achieving cost reduction and space-saving. 【Features】 - It provides an environment that does not cause waveform distortion, voltage drop, or frequency reduction during starting current generation, similar to commercial power sources. - It meets the voltage accuracy, frequency accuracy, and low voltage unbalance rate (JIS C 4034) required on the power supply side. - There is no waveform distortion during starting current, resulting in low noise and energy savings (compared to MG type). - It is low-cost compared to linear amplifier types. - Setting the output frequency is easy. *For more details, please refer to the PDF document or feel free to contact us.

• power supply
• Power Supplies
• Testing Equipment and Devices

The "SYN/HF Series" is a frequency converter capable of 400Hz output, primarily used for testing aviation and marine equipment. It is an essential power supply for the development and testing of various equipment and component manufacturers. Additionally, in the field of aircraft maintenance, its long experience and reliability have been recognized, leading to its widespread adoption in both public and private sectors. 【Features】 ■ Output frequency: 400Hz ■ Capacity: 5–200kVA ■ Input/Output: Single-phase/Three-phase ■ For testing aviation and marine equipment ■ Widely adopted in both public and private sectors *For more details, please refer to the PDF materials or feel free to contact us.

• power supply
• Power Supplies
• Testing Equipment and Devices

In tests using conventional real batteries, prior charging of the batteries is necessary. If they degrade due to repeated use, replacement is also required. Additionally, it may be necessary to prepare multiple batteries with different ratings depending on the test subject. For these reasons, there are concerns about decreased reproducibility of tests and increased costs. By introducing this product, more reproducible and stable testing becomes possible. There is no need for charging time, and there are no worries about degradation. Furthermore, it is possible to simulate batteries with various ratings through settings. For these reasons, test time and costs are significantly reduced. 【Features】 - Compact and high efficiency - Various control modes - Achieves fast response - Interfaces support Ethernet and CAN - Local operation uses a touch panel and jog dial - Custom products can also be manufactured

• Testing Equipment and Devices
• Other energy equipment
• Analytical Equipment and Devices

The SYN-PC series is a phase conversion device that converts single-phase power to three-phase power. It can be used when operating three-phase loads with a single-phase generator or for various experiments. 【Features】 - Use of three-phase power where only single-phase power is available - Use of three-phase loads with a single-phase generator

• power supply
• Power Supplies
• Testing Equipment and Devices

The YDA series is a DC/AC conversion device that achieves compact size and high performance through PWM control. It features enhanced protection functions and produces a clean sine wave, making it possible to manufacture up to large capacities. 【Features】 - High output voltage and frequency accuracy with extremely fast response speed - Clean sine wave output even with nonlinear loads - A wide lineup ranging from small to large capacities

• power supply
• Power Supplies
• Converters and Transducers

The YTR series is a DC stabilized power supply that outputs high-quality direct current controlled by power transistors. It achieves high stability (±0.005% + 3mV / ±0.05% + 10mA) and minimal ripple, and is equipped with overvoltage, overcurrent, and overheating protection circuits. 【Features】 - High stability: ±(0.005% + 3mV), ±(0.05% + 10mA) - Minimal ripple noise - Overvoltage, overcurrent, and overheating protection circuits - Crossover method (automatic transition between CV operation and CC operation) protects the load from excessive power - High voltage and large current options available

• power supply
• Power Supplies
• Testing Equipment and Devices

The YS series is a constant voltage (CV) DC stabilized power supply using thyristor control. It has no moving parts, making maintenance easy, and it is highly reliable and economical. 【Features】 - Economical - Output voltage accuracy ±0.5% - Fast response 0.5 seconds (50-100% load) - Output voltage ripple 0.5% Vrms for three-phase input, 2% Vrms for single-phase input - Output voltage adjustable from 0 to 110% (accuracy guarantee is not applicable for less than 25% of rated voltage) - Constant current function can also be added as an option - The rectification circuit replaces the rectifying elements with thyristors and controls the conduction angle of the thyristors, resulting in a fast response, no moving parts, easy maintenance, and long-lasting reliability.

• power supply
• Power Supplies
• Testing Equipment and Devices

The YRD-SC series is a power supply that simulates the IV curve, which is a fundamental characteristic of solar panels. It can be used to recreate various solar irradiation environments in settings without actual solar panels, allowing for the evaluation of power conditioners and production testing. By integrating with the accompanying computer application "Solar Simulation Software," it is possible to simulate a realistic environment that considers changes in solar irradiation and temperature from "sunrise" to "sunset." 【Features】 - Simulates the I-V curve of solar panels (Table Mode and Approximation Mode) - Capable of environmental simulation such as solar irradiation and module temperature - Time-series simulation from sunrise to sunset - Real-time qualification of IV/PV curves - Data logging capability - Can also be used as a high-precision standalone DC power supply - Safe testing possible with power limiters - Manufactured with required specifications from small capacity (3kW) to large capacity (300kW) - Utilizes the newly developed digital power control board CIC (Common Inverter Controller)

• power supply
• Power Supplies
• Testing Equipment and Devices

The "SYN/MMU series" is a device that prevents the impact of instantaneous power outages on output power by utilizing an internal electric double-layer capacitor. It prevents sudden instantaneous power outages caused by various factors by releasing energy stored in the electric double-layer capacitor (EDLC). It provides uninterrupted power supply to delicate equipment such as precision machining machines, semiconductor manufacturing equipment, and servers. 【Features】 ■ Supports 3 seconds of instantaneous power interruption through energy supply from the electric double-layer capacitor ■ Constant voltage and constant frequency (switchable between 50/60Hz) ■ Backup time of 3 seconds *For more details, please refer to the PDF document or feel free to contact us.

• power supply
• Other energy equipment
• Power storage device

YAMABISHI proposes advanced technology and a sense of mission to various fields around the world through power supply equipment. We are currently distributing a comprehensive catalog featuring all YAMABISHI power supply devices for free!! <<Contents>> ● Frequency converters / DC-AC converters ● Uninterruptible power supplies ● Charge and discharge devices ● DC power supplies ● High voltage power supplies ● Automatic voltage regulators ● Load devices ● Custom & systems You can search by product name, purpose, or model. *If you would like the comprehensive catalog, please contact us through 'Contact Us.' *Some parts of the catalog can be checked via 'Catalog Download.'

• power supply
• power supply