加藤ステンレス科学 List of Products and Services

The mantle heater with built-in electric heating wire is installed in the tank, directly heating the tank and controlling the temperature using PID control. We design and manufacture stirrers and stirring blades according to the stirring viscosity and purpose. Additionally, we can produce capacities other than 5L. Please contact us for more details. 【Specifications (excerpt)】 ■ Capacity: 5L ■ Material: SUS304 ■ Finish: Inner and outer buff polishing equivalent to #320 ■ Stirrer: BL300 (300rpm) with stirring stand ■ Operating temperature: Room temperature to 150℃ ■ Operating pressure: Atmospheric pressure *For more details, please refer to the PDF document or feel free to contact us.

• Stainless steel container
• Mixer/agitator
• Other laboratory equipment and containers

Install a mantle heater with built-in electric heating wire onto the tank. The tank is directly heated, and temperature control is performed using PID control. Temperature control can be adjusted with a temperature control controller. We design and manufacture stirrers and stirring blades according to the stirring viscosity and purpose. Additionally, we can produce capacities other than 10L. We also offer custom manufacturing to meet other requests. We handle standard pressure specifications as well. For more details, please contact us. 【Specifications (excerpt)】 ■ Capacity: 10L ■ Material: SUS304 ■ Finish: Inner and outer buff polishing equivalent to #320 ■ Valve: Deadless ball valve ■ Frame: With casters ■ Operating temperature: Room temperature to 130℃ ■ Operating pressure: Less than -0.1 to 0.19MPa *For more details, please refer to the PDF materials or our company website, or feel free to contact us.

• Heating device

At Kato Stainless Science, we handle various types of stirrers, including three-one motors, explosion-proof air motors, magnetic stirrers, EG mixers, and PA mixers. Additionally, we enable stirring in a sealed state using MS seals! The shape of the stirring blades can also be changed. We will propose the stirring tank that you desire. *For more details, please visit our website or contact us.

• Beverage Production Equipment
• Mixer/agitator
• Stainless steel container

It is possible to quickly filter by suction using a vacuum pump. ◇ The Buehler funnel has been set in a vacuum tank (receiver) with a vacuum seal. ◇ A vacuum gauge, suction port, and leak valve are also included. ◇ The funnel has a detachable filter plate for easy cleaning. A 20L type can also be manufactured. 【Specifications】 ■【Specifications (excerpt)】 ■ Container body: SUS304 ■ Gasket: Funnel... NBR Tank... EPDM ■ Tank capacity: 10L ■ Funnel capacity: 9L ■ Surface treatment: Buff polishing ■ Operating pressure: -0.1MPa to atmospheric pressure We also accommodate changes to specifications. * For more details, please refer to the PDF document or feel free to contact us.

• Stainless steel utensils and containers
• Separation device
• Other food machinery

The contents of the tank are clearly visible. Operating temperature -40° to 60° Do not use if the solvent comes into contact with vapor.

• Stainless steel utensils and containers

This product is designed for easy material input and output due to the presence of an opening and closing lid and valve! 【Specifications】 ■Tank: Material: SUS304, Finish: Buff #320 equivalent Specification: With stirrer mounting seat Option: Change in the length of the straight cylinder ■Legs: Specification: With casters, Option: Change in leg length ■Drain Valve: Specification: Includes sanitary ball valve 2S (disassembly and cleaning possible) Option 1: Tank ball valve with no stirring dead space Option 2: Diaphragm tank valve with no liquid accumulation ■Lid: Specification: Split lid, hinge, lid locking latch ■Stirrer: Specification: ON/OFF switch, overload protection device included Rotation speed: Constant speed 300rpm (50Hz), 360rpm (60Hz) Stirring viscosity reference: 100Ps·s (equivalent to olive oil) Power supply: 100V single phase, Power cord: 3m, with plug

• Stainless steel container

The rotation speed of the mixer can be adjusted from 8 to 400 rpm using the speed adjustment dial. We can also accommodate changes in specifications such as leg length, valves, and lid shapes. From 23L to 75L! 【Main Specifications】 ■Tank: Material: SUS304, Finish: Buff #320 equivalent ■Legs: Specification: With casters, Option: Change in leg length ■Drain Valve: Specification: Equipped with a sanitary ball valve (disassemblable for cleaning) Option 1: Tank ball valve with no mixing dead space Option 2: Diaphragm tank valve with no liquid pooling ■Lid: Specification: Split lid with mixing shaft cutout and split lid stopper 【EG Mixer Specifications】 Shaft: Continuously adjustable telescopic Shaft Diameter: Φ10 Blade: 12mm Rotation Speed: 8 to 400 rpm Rated Torque: 1.7 N·m Viscosity that can be mixed: Approximately 100 mPa·s (equivalent to olive oil) We also accept custom orders for size changes, additional processing, and coatings.

• Mixer/agitator

At Kato Stainless Science Co., Ltd., we handle various stainless steel containers and equipment. 【Introduction to Our Products】 - Storage and transport tanks, sealed tanks, single taper tanks, hopper tanks, - Jacketed tanks, mixing tanks - Sanitary tanks for pharmaceuticals - Various bottles, vats, square tanks - Pressure and vacuum tanks: multi-tanks, lab bottles, pressure tanks - Experimental equipment: reactors, separable flasks, beakers, oil baths - Filters: Buechner funnels, Nutsche filters - Peripheral equipment: tank dollies, windows, stirrers, constant temperature baths - Others: buckets, ladles, funnels, hoppers - Temperature control system tanks: jacketed tanks, constant temperature baths, stirrer units - Custom containers and equipment tailored to individual applications and purposes *For details on each product, please refer to the comprehensive catalog available for download below under "PDF Download."

• Stainless steel container
• Other physicochemical equipment

Stirring and Temperature Control System Tank… This is to inform you of the preparation capacities of 10L, 20L, and 30L. Stable temperature controlled water and silicone oil circulate through the tank's jacket and the constant temperature bath to regulate the temperature of the contents. Operating pressure: -0.1 MPa to 0.19 MPa, allowing for vacuum degassing and pumping of the contents. 【Product Introduction】 ■ RKJS Series Tank, stirrer, and constant temperature bath unit integrated with constant temperature water at 10°C to 90°C above room temperature. ■ RKJSK Series Constant temperature water: 10°C to 95°C above room temperature; silicone oil: 10°C to 150°C above room temperature control. ■ We respond to user needs with custom-made solutions. *For more details, please refer to the PDF document or feel free to contact us.

• Testing Equipment and Devices
• tank

This is a notice for those considering custom stainless steel products. Our company accepts orders for custom products. For many years, we have received numerous orders for custom items and have engaged in various processing, design, and manufacturing of products. We will utilize our technical skills to create the products that our customers desire! [Introduction to Our Technology] ■ Additional processing: welding of piping fittings, processing of observation windows, installation of level gauges, hakama processing, scale processing, lid processing, assembly of valves ■ Production of products with dimensions not available in standard products ■ Manufacturing of various shapes of products such as tanks, hoppers, and various containers ■ Production of mixing and temperature control system tanks *For more details, please refer to the PDF materials or feel free to contact us.

• tank

The "Temperature Control System Tank" that we handle is a circulation-type constant temperature water tank that circulates heated water with a constant temperature through the tank's jacket to stabilize the temperature inside the tank. The lid can be raised and lowered easily by simply turning the handle of a ratchet winch. The drain valve is equipped with a deadless tank ball valve for stirring. Additionally, it can also perform vacuum stirring and degassing. 【Features】 ■ Heating and stirring at a constant, stable temperature ■ Pressurized transfer to the next line ■ Deadless tank valve for stirring ■ Vacuum degassing stirring is also possible ■ Easy lid operation ■ Easy to clean * For more details, please refer to the PDF document or feel free to contact us.

• tank

At Kato Stainless Science Co., Ltd., we handle the temperature control system tank "RKJS Series." The tank's capacity is designed to accommodate the internal solution considering stirring and other factors. It is also possible to pressurize the internal solution up to 0.19 MPa for pressurized transfer purposes. In that case, safety valves, pressure gauges, and leak valves can be installed as options. After vacuum degassing stirring, the internal solution can be pressurized and transferred. 【Features】 ■ Tank capacity: Designed to accommodate the internal solution considering stirring and other factors ■ Operating pressure: -0.1 MPa to 0.19 MPa ■ It is possible to pressurize the internal solution up to 0.19 MPa for pressurized transfer purposes. *For more details, please refer to the PDF materials or feel free to contact us.

• tank

The "T-205P" is a constant temperature oil tank circulation pump with an internal stirring mechanism. It has internal stirring for the tank, allowing the heat transfer medium in the 35L tank to be preheated to a constant temperature before being sent in. This product also includes a special specification with a heater capacity of 3Kw and a rated current of 17A, known as "KT-300HP." 【Specifications (excerpt)】 ■External dimensions: W640×D380×H525mm ■Internal dimensions: W440×D300×H300mm ■Capacity: 35L ■Temperature range: Room temperature +10℃ to +150℃ ■Temperature stability: ±0.1℃ ■Temperature control: Digital temperature indicating controller with PID control method *For more details, please refer to the PDF document or feel free to contact us.

• tank
• Thermostatic chamber
• Thermostatic water bath

The "T-201P" is a constant temperature oil bath with a circulation pump. It is suitable for heating and controlling small-scale laboratory solutions with a capacity of 5L. This product can control temperatures up to 200°C on its own, but when used with a set device, due to the tank drain valve, stirring seal, insulation, etc., the maximum temperature will be 150°C. 【Specifications (excerpt)】 ■External dimensions: W500×D385×H410mm ■Capacity: 15L ■Temperature range: Room temperature +10°C to +200°C ■Temperature stability: Within ±0.1°C ■Temperature control: Digital temperature indicator controller with PID control method ■Heater: Sheath wire type 1.2kW *For more details, please refer to the PDF document or feel free to contact us.

• tank
• Thermostatic chamber
• Thermostatic water bath

We design and provide temperature control system tanks equipped with jacket tanks and stirrers. The tank capacities of the 'JOTS-T55' are 5L, 10L, 20L, and 30L. Depending on the viscosity of the internal solution and the stirring purpose, we design and manufacture stirrers and stirring blades. 【Control temperature range for water as the internal solution (T-55)】 ■5L: Room temperature +10℃ to 78℃ ■10L: Room temperature +15℃ to 75℃ ■20L: Room temperature +10℃ to 60℃ ■30L: Heat retention at 60℃ *Reference data for installation location at 25℃ *For more details, please refer to the PDF document or feel free to contact us.

• tank

The "T-55/T-55W" is a constant temperature water circulation device that can circulate high-temperature water up to +80°C in a closed circuit. Of course, it can also be used as a constant temperature water tank. The "T-55W" has a heater capacity of 2.6 kW, which is an upgrade from the 1.3 kW of the "T-55," and it operates on single-phase 200V. It comes with a temperature display inside the tank and includes a Pt100 ohm temperature sensor. 【Features】 ■ Capable of circulating high-temperature water up to +80°C in a closed circuit ■ Can also be used as a constant temperature water tank ■ Comes with a temperature display inside the tank and includes a Pt100 ohm temperature sensor (T-55W) *For more details, please refer to the PDF document or feel free to contact us.

• tank
• Thermostatic water bath
• Thermostatic chamber

We design and provide temperature control system tanks equipped with jacket tanks, handy coolers, and stirrers. Tank capacities are 2L, 5L, 10L, 20L, and 30L. Depending on the viscosity of the internal solution and the stirring purpose, we design and manufacture stirrers and stirring blades. 【Specifications】 ■ Tank capacity: 2L, 5L, 10L, 20L, 30L ■ Operating temperature range - Varies depending on the specific gravity, specific heat, and heat exchange rate of the contents when set with the tank - Also changes when insulation material is added to the tank *For more details, please refer to the PDF document or feel free to contact us.

• tank

Kato Stainless Steel Science Co., Ltd. offers the open-type handy cooler 'TRL-108H'. With a combination of a freezer and a heater, it can be used in a wide temperature range from -10°C to 80°C. Additionally, we have a special version product with an increased heater capacity of 1kW (rated current 14A), called "TRL-108HLM100". 【Specifications (excerpt)】 ■External dimensions: W265×D375×H455mm ■Internal dimensions: W180×D110×H180mm ■Capacity: 3L ■Temperature range: -10°C to +80°C ■Temperature stability: ±0.05°C (inside the chamber) ■Temperature control: Digital temperature indicator controller with PID control method *For more details, please refer to the PDF document or feel free to contact us.

• Control Panel Cooler
• tank

"RKJSW" is a flange-type sealed jacket tank. It features easy opening and closing with swing bolt fastening. If heating or reactions generate vapor, please provide an opening to release the vapor. Additionally, with optional components, it can be used as a vacuum and pressurized transport tank. 【Features】 ■ Flange-type sealed design ■ Easy opening and closing ■ Can be used as a vacuum and pressurized transport tank with optional components ■ Designed and manufactured to meet specific needs *For more details, please refer to the PDF document or feel free to contact us.

• Stainless steel utensils and containers
• tank

The "JOT" is an open-type jacket tank. It offers options for a simple sealing lid and a notch lid. Compared to flange-type tanks, it is lower in cost and lighter. Additionally, in high-temperature conditions, for safety and insulation purposes, the tank body is wrapped with insulation material and made into a triple tank. 【Features】 ■ Open type ■ Lower cost and lighter compared to flange-type tanks ■ Options for simple sealing lid and notch lid ■ Operating pressure: atmospheric pressure ■ Can accommodate a stirrer and thermometer *For more details, please refer to the PDF document or feel free to contact us.

• Stainless steel utensils and containers
• tank

Kato Stainless Steel Science Co., Ltd. handles the Three-One Motor 'BL/BLh/BLW/EP'. The "EP" is an air motor with a completely explosion-proof specification. It adjusts the air flow with a needle valve to control the rotation speed and torque. It features a stainless steel drill chuck that is resistant to solvents (for shaft diameters up to Φ 8). The forward and reverse timer for the "BL/BLh/BLW series" can be set to 5, 10, 20, 30, 45, or 60 seconds. 【Features (EP)】 ■ Completely explosion-proof air motor stirrer ■ Adjusts air flow with a needle valve to control rotation speed and torque ■ Stainless steel drill chuck resistant to solvents ■ Usable without oil *For more details, please refer to the PDF document or feel free to contact us.

• Other motors

Kato Stainless Science Co., Ltd. handles "stirring tanks." A magneto-seal mixer is installed at the bottom of the tank. The part that occupied the upper space of the tank with the stirrer becomes unnecessary, resulting in a wider working space and a lighter lid. 【Stirring Specifications】 ■ Solution capacity in the tank: 30L to 500L ■ Uniform stirring viscosity guideline for low-viscosity liquid + low-viscosity liquid: 100cp or less ■ Dissolution stirring usage temperature for low-viscosity liquid + dissolvable powder: MAX 130℃ * The Teflon of the shaft bearing holder may mix into the liquid, but it can be removed with a filtration filter. * For more details, please refer to the PDF document or feel free to contact us.

• Stainless steel container
• Stainless steel utensils and containers
• tank

Kato Stainless Science Co., Ltd. handles large pressure tanks called 'TOT'. The maximum operating pressure is 0.19 MPa. The material is SUS304, but it can also be manufactured in SUS316L. By adopting a ferrule flange, we have achieved a low-cost pressure tank. Additionally, we offer accessories such as the "SDR Leak Valve Set," "SD Safety Valve," and "KGV Pressure Gauge Set." 【Specifications】 ■ Capacity: 100–400L ■ Material: SUS304 (can also be manufactured in SUS316L) ■ Gasket: Viton, etc. ■ Finish: Buff polished *For more details, please refer to the PDF materials or feel free to contact us.

• Stainless steel container
• Stainless steel utensils and containers
• tank

"FOB/ROB" is a full-open type pressure container. "FOB" has a flat bottom, allowing liquid bottles to be placed directly inside the container for liquid pressure transfer. Additionally, by adding an R shape inside the main body, it is also possible to directly pour liquid into it. "ROB" is a type that changes the bottom shape from flat to R-shaped. The ease of pouring contents and the cleanliness remain unchanged. 【Features】 ■ Full-open type ■ Easy to pour contents ■ Good cleanliness ■ Flat bottom of the stainless steel tank (FOB) ■ Allows liquid bottles to be placed directly inside for liquid pressure transfer (FOB) ■ R-shaped bottom of the stainless steel tank (ROB) *For more details, please refer to the PDF document or feel free to contact us.

• Stainless steel container
• Stainless steel utensils and containers
• Food storage equipment and facilities

The "RBN Series" is a container that is highly airtight and suitable for the storage and transportation of liquids and powders. By incorporating nozzles and valves for pumping, it can also be used as a pumping container. Additionally, it comes without handles and skirts for capacities of 1 to 5 liters, and with handles and skirts for capacities of 10 liters and above. 【Specifications】 ■ Capacity: 1L to 30L ■ Material: SUS304/SUS316L ■ Gasket: Viton, etc. ■ Finish: Buff polished ■ Maximum operating pressure: 0.68MPa ■ Leak rate: Below 1.05×10^-3Pa·m3/sec *For more details, please refer to the PDF document or feel free to contact us.

• Stainless steel container
• Stainless steel utensils and containers

The "PVT25" is a lightweight pressurized delivery and depressurizable tank. It is secured with a high-safety wrap-type band using a special packing in the unique flange of the body and lid. We offer a variety of optional parts, making it suitable for diverse applications. 【Specifications】 ■ Tank capacity: 10L type, 20L type ■ Operating pressure: 0.14KPa (vacuum) to less than 0.17MPa ■ Leak rate: 1.05×10^-3 Pa·m3/sec or less ■ Operating temperature: Room temperature ■ Material: SUS304 ■ Finish: Buff polished ■ Standard packing: EPDM (for both pressure and vacuum) *For more details, please refer to the PDF document or feel free to contact us.

• Stainless steel container
• Stainless steel utensils and containers
• tank

The "DT-ST-J-L/DT-CTL-J-L" is a jacketed container with a mirror plate shape for the bottom, which excels in liquid discharge and is easy to stir with a stirrer. It can be manufactured using SUS316L material. Various types of valves are also available. It can be modified to a sealed type (CTH ・CTL), and additional processing for the main body and lid is accepted. We can accommodate specification changes and custom orders based on your application, usage method, contents, and materials, so please feel free to contact us. 【Features】 ■ Custom-made, allowing changes to the length of nozzles and the main body ■ Can be manufactured using SUS316L material ■ Can be modified to a sealed type (CTH ・CTL) ■ Various types of valves are also available ■ All sizes come with handles on the main body *For more details, please refer to the PDF materials or feel free to contact us.

• Stainless steel container
• Food storage equipment and facilities
• Other physicochemical equipment

The "HT-ST-J/HT-CTL-J" is a product with a jacket attached to a hopper-type container. The type and size of the discharge outlet can be changed to match the contents and piping. Due to its hopper-shaped bottom plate, it excels in liquid discharge, and the hopper angle can be adjusted from 60° to 135°. 【Specifications (excerpt)】 ■ Container body and jacket: SUS304 ■ Packing: Silicone rubber (CTL) *Compliant with food sanitation laws ■ Jacket nozzle: 1S ferrule ■ Surface treatment: Buff polishing on inside and outside ■ Operating conditions: Atmospheric pressure (no vacuum or pressure) *For both inner tank and jacket *For more details, please refer to the PDF document or feel free to contact us.

• Stainless steel container
• Stainless steel utensils and containers
• Other food machinery

The "KTT-ST-J/CTL-J" is an insulated product with a jacket added to the single taper type container "KTT" for heat retention and cooling. Due to the sloped bottom plate in the discharge direction, all liquid can be fully discharged. As this is a made-to-order product, we also accept custom processing to accommodate changes in dimensions, materials, and applications. 【Specifications (excerpt)】 ■ Container body and jacket: SUS304 ■ Gasket: Silicone rubber (CTL) *Compliant with food sanitation laws ■ Jacket nozzle: 15A ferrule ■ Surface treatment: Buff polishing on both inside and outside surfaces ■ Operating conditions: Atmospheric pressure (no pressure variation allowed) *For both inner tank and jacket *For more details, please refer to the PDF document or feel free to contact us.

• Stainless steel container
• Stainless steel utensils and containers
• Food storage equipment and facilities

The "ST-J/CTL-J" is a product that features a jacket added to the general-purpose container "ST" and the sealed container "CTL." As it is a made-to-order product, changes in dimensions and materials, as well as custom processing to suit specific applications, are possible. The packing (CTL) is made of silicone rubber that complies with food sanitation laws and can be used for insulation and cooling purposes. 【Specifications (excerpt)】 ■ Container body and jacket: SUS304 ■ Packing: Silicone rubber (CTL) *Complies with food sanitation laws ■ Jacket nozzle: 1S ferrule ■ Surface treatment: Buff polished inside and outside ■ Operating conditions: Atmospheric pressure (not suitable for vacuum or pressure) *For both inner tank and jacket *For more details, please refer to the PDF document or feel free to contact us.

• Stainless steel container
• Stainless steel utensils and containers
• Food storage equipment and facilities

"PST" is a specialized container for the storage of raw powder and intermediate products in pharmaceutical manufacturing. It uses SUS316L material with improved corrosion resistance, acid resistance, and pitting resistance. The inner surface of the container is electropolished to enhance cleanability, including the removal of corrosion-resistant buff powder. We also provide accompanying documents such as inspection reports, material certificates, and electropolishing certificates. 【Specifications】 ■ Container body/lid: SUS316L ■ Round rod handle/leverage band: SUS304 ■ Packing: Silicone rubber ■ Surface treatment: Inner surface buff polished followed by electropolishing; outer surface buff polished ■ Operating conditions: Atmospheric pressure (not suitable for vacuum or pressure) *For more details, please refer to the PDF document or feel free to contact us.

• Stainless steel container
• Stainless steel utensils and containers

Our products are widely used by individuals from food and pharmaceutical companies to chemical companies, spanning from the research and development department to the production department. The 'ST-W/CTH-W' is a versatile container with a faucet that allows for easy water dispensing by simply turning the tap whenever needed. It is convenient for portioning, and the sealed type prevents spills during transport. 【Specifications】 ■Container: SUS304 ■Packing: Silicone rubber *CTH-W series ■Faucet: Nominal 13 brass + plating (O-ring NBR) ■Surface treatment: Buff polished inside and outside ■Usage conditions: Atmospheric pressure (not suitable for vacuum or pressure) *For more details, please refer to the PDF document or feel free to contact us.

• Stainless steel container
• Stainless steel utensils and containers
• Food storage equipment and facilities

The "STV/CTHV" is a versatile container with a ball valve that is convenient for portioning and is a sealed container. The nozzle tip has a screw-type fitting, allowing for connection. The valve is also made of stainless steel, and the valve seal is made of PTFE, providing excellent chemical resistance. Furthermore, the "CTHV" is a sealed container, so the contents do not spill during transport. 【Specifications (excerpt)】 ■ Container/Nipple: SUS304 ■ Packing: Silicone rubber (CTH) ■ Ball valve: SCS14 ■ Surface treatment: Buff polished inside and outside ■ Operating conditions: Atmospheric pressure (not suitable for vacuum or pressure) *For more details, please refer to the PDF document or feel free to contact us.

• Stainless steel container
• Stainless steel utensils and containers
• Food storage equipment and facilities

The "CTH" is a sealed container with color packings. It comes in three colors: red, blue, and green. You can change the color of the packing according to the contents. Our products are widely used by people in various fields, from research and development to production, including food and pharmaceutical companies as well as chemical companies. 【Specifications】 ■ CTH container: SUS304 ■ Packing: Silicone rubber ■ Colors: Red, Blue, Green ■ Surface treatment: Buff polished inside and outside ■ Usage conditions: Atmospheric pressure (not suitable for vacuum or pressure) *For more details, please refer to the PDF materials or feel free to contact us.

• Stainless steel container
• Stainless steel utensils and containers
• Food storage equipment and facilities

The "CTH-PTFE" is a storage container with a PTFE gasket that is resistant to dirt, easy to clean, and simple to maintain. Solvents for soaking rubber gaskets can be stored. We offer products with capacities ranging from 7L to 36L. 【Specifications】 ■ CTH Container: SUS304 ■ Gasket: PTFE ■ Surface Treatment: Buff polished inside and out ■ Operating Conditions: Atmospheric pressure (not suitable for vacuum or pressure) *For more details, please refer to the PDF document or feel free to contact us.

• Stainless steel container
• Stainless steel utensils and containers
• Food storage equipment and facilities

The "CTL-R" is a ribbed sealed container made with SUS304 for the lid, container, and lever band. The ribs serve as a non-slip feature when attached to the inverted lifter, and together with the discharge chute, it becomes an inverted discharge container. Additionally, the strength of the container is increased. 【Specifications】 ■ Lid/Container/Lever Band: SUS304 ■ Packing: Silicone Rubber ■ Surface Treatment: Buff polishing on both inner and outer surfaces ■ Operating Conditions: Atmospheric pressure (no vacuum or pressure) *For more details, please refer to the PDF document or feel free to contact us.

• Stainless steel container
• Stainless steel utensils and containers
• Food storage equipment and facilities

The "CTLK" is a sealed container with a padlock that prevents unauthorized contact and use by third parties. Locking is as simple as inserting it into the hole of the lever band hook. It prevents the lever band from falling off due to shocks during movement. 【Specifications】 ■ CTL Container/Lever Band: SUS304 ■ Packing: Silicone rubber (compliant with food sanitation laws) ■ Padlock: Brass ■ Surface Treatment: Buff polishing on inside and outside ■ Usage Conditions: Atmospheric pressure (not suitable for pressure changes) *For more details, please refer to the PDF document or feel free to contact us.

• Stainless steel container
• Stainless steel utensils and containers
• Food storage equipment and facilities

The "HTL-F" is equipped with a discharge chute set on a sanitary tank, which allows for the inversion and discharge of powder. A special Teflon packing is placed between the tank body and the discharge chute, secured with a dedicated band. This structure prevents powder accumulation. It is a discharge hopper for sanitary tanks, but it can also be set up for standard tanks. Please contact us if you are interested. 【Selected Specifications (Excerpt)】 ■ Tank Inner Diameter: 387mm / 430mm / 470mm / 565mm ■ Material: SUS304 / SUS316L ■ Taper Angle: 60 degrees / 90 degrees / 120 degrees ■ Finish - Internal and external buff polishing equivalent to #320 - Internal electrolytic polishing and external buff polishing equivalent to #320 *For more details, please refer to the PDF document or feel free to contact us.

• Stainless steel container
• Stainless steel utensils and containers

The "SMA" is a tank designed with a focus on cleanability. It is suitable for the storage and transportation of pharmaceuticals. The curled part of the tank's edge is fully welded to prevent contamination from accumulating. Additionally, the handle is made of round bar, and the welded parts are fully welded and finished. 【Features】 ■ Handle: Made of round bar ■ Welded parts: Fully welded ■ In the case of SUS316L specifications, the materials for the handle and lever band are SUS304 ■ It is also possible to attach accompanying documents such as product inspection certificates, electrolysis certificates, and material certificates. *For more details, please refer to the PDF materials or feel free to contact us.

• Stainless steel container
• Stainless steel utensils and containers

The "MG5800/HP" is a magnetic stirrer that uses ferrite and rare earth cooperative magnets. Its dimensions are 270 (W) × 250 (D) × 80 mm (H). It has the stirring capacity of 30L of silicone oil. In addition to an oil bath with insulation material, it can stir even with a gap of about 20 mm. 【Features】 ■ Power supply: AC100V ■ Speed: 0–1000 rpm ■ Rotation mode: One-way rotation, option for repeat stirring ■ Repeat: 15–40 seconds ■ Built-in timer *For more details, please refer to the PDF document or feel free to contact us.

• Stainless steel container
• Stainless steel utensils and containers

The "OB Series" is an oil bath equipped with self-tuning and auto-tuning features. The bath heater material is made of SUS304, and a circuit protector is employed as a safety measure. We offer a lineup of general-purpose oil baths for experiments, including digital gauges, overheat preventers, and insulation materials. 【Common Specifications (Digital)】 ■ Bath Heater Material: SUS304 ■ Power Supply: 100V / Installation Plug ■ Safety Measures: Circuit Protector ■ Temperature Control: Digital Gauge 0.1℃ Setting/Display, Sensor (K) Thermocouple ■ Equipped with Self-Tuning and Auto-Tuning, Accuracy within ±0.5℃ *For more details, please refer to the PDF document or feel free to contact us.

• Stainless steel container
• Stainless steel utensils and containers
• Heating device

At Kato Stainless Science Co., Ltd., we handle washbasins from the 'NK9 Series' and washbasin stands from the 'SD Series'. The material used for these products is SUS304. Our products are widely used by individuals from food and pharmaceutical companies to chemical companies, spanning from the research and development department to the production department. 【Product Lineup】 ■ Washbasins (NK9 Series) - NK9-32 - NK9-32H - NK9-34H - NK9-36H *For more details, please refer to the PDF document or feel free to contact us.

• Stainless steel container
• Stainless steel utensils and containers

The "HS Series" is a stainless steel multipurpose ladle. Made entirely of stainless steel, it is characterized by its durability and resistance to rust. It is available in capacities ranging from 0.5L to 2L. Please choose according to your needs. 【Features】 ■ Stainless steel multipurpose ladle ■ Material: SUS304 ■ Finish: Buff polished *For more details, please refer to the PDF document or feel free to contact us.

• Stainless steel container
• Stainless steel utensils and containers

The "BA Series" is a stainless steel bucket. It is available in capacities ranging from 10L to 20L. It can be used in a wide range of fields, from research and development departments to production departments, including food and pharmaceutical companies as well as chemical companies. We also handle other stainless steel products, so please feel free to inquire. 【Features】 ■ Made of stainless steel ■ Available in capacities from 10L to 20L ■ Usable in a wide range of fields *For more details, please refer to the PDF document or feel free to contact us.

• Stainless steel container
• Stainless steel utensils and containers

The "LK Series" is designed to have airtightness by using a dedicated packing (NBR), making it suitable for vacuum suction filtration. It is separable, allowing for the cleaning of the inner walls. Additionally, we offer a rich lineup including the Nucce "LK60," the funnel "LK05," and the small hopper types "LK12" and "LK13." 【Features】 ■ Made of stainless steel ■ Suitable for vacuum suction filtration ■ Separable for cleaning of inner walls ■ Surface treatment is buff polished finish *For more details, please refer to the PDF materials or feel free to contact us.

• Stainless steel container
• Separation device
• Other food machinery